MSI N460GTX Cyclone 768D5 - NVIDIA updates to driver not working

Hi!
I own a MSI N460GTX Cyclone 768D5 card and using the driver provided in MSI website (Driver Version:259.22). Recently I tried some new games but some were giving graphic problems with it. Temperature wasnt a problem, and when I checked many NVIDIA users needed only to update their drivers to solve similar issues that I have encountered.
I tried going to to NVIDIA and used the auto-scan and downloaded the drivers 260.99, however on install, all gaming applications cease to function and even NVIDIA control panel malfunctions due to a "incorrect version" error.
Could you advise on how to proceed in getting an update for this particular card, thank you!

Use Driver Sweeper in Safe Mode to remove current drivers,
then reboot and boot to normal mode and install vga driver again
http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29_d1655.html

Similar Messages

  • NVIDIA Quadro K1000M driver not working

    It came up in LSC and sait it had stopped working. It said I could check for updates, so I did. I updated it once, but I am still getting the notification that it isnt working. My computer crashed earlier today, when I unplugged it, so I guess this could be related.
    Heres what it says
    http://i.imgur.com/B4igR.png?1

    Hi, Scott8571
    It is always a good idea to check for driver updates in Lenovo Solution Center and from Lenovo's driver matrix here. Select your machine type and model, and then select the operating system and types of driver you are seeking. You can either download the latest video driver for the system, or you can check the versions of the driver to make sure they are the same. If there is an update for the driver on the Lenovo website, then this may solve your issue.
    When your computer crashed, was the battery full and charged before you unplugged it? And did this issue of the video driver no longer working occur after the computer crashed?
    Best of luck,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • N460GTX Cyclone 768D5/OC blue artifacts and stopped responding

    In the last month I have been having issues with my graphics card to the point that I can't play any game (at all, always stops responding), flash on websites cause video driver "stopped responding" error, vlc or media player videos cause stopped responding error, and any 3d screen saver preview in windows 7 causes artifacts and sometimes the stopped responding error.  I can still do anything 2D fine but always haver little blue artifacts all over the screen.  Current drivers are Nvidia 266.58, I have tried MSI drivers, Nvidia 260.* drivers and a set of older Nvidia drivers that supposedly didn't have the stopping issues but all had problems even after fully wiping the old drivers on every install.
    Given the power issues I have seen in past threads I hooked up my Kill-a-watt again (I always baseline my systems on burn in with that), and I am finding my Wattage draw hasn't changed.  Kill A Watt measures 188W avg Draw, Peak 250W.  All drives set on RAID to spin up sequentially so I don't get the max draw you'd expect.  I ran this with superPi, prime95 and memtest and all run fine with max draw I saw at 250W.  I tried to run 3d benchmark tests but like all 3d apps they all crash after video card not responding error.  When building this I carefully specd out the power supply with conservative numbers and multiple online calculators, this PS should be able to handle adding 2 more 1TB drives as long as I don't do SLI (don't have room in case anyway with RAID controller).
    I have tried all I can think of to resolve this but nothing helps and I'm thinking it's got to be an issue with the card since nothing in my config has changed.  Is it the card for sure and will need RMA?
    Here are my specs:
    Asus P6T WS Pro Mobo
    Intel Core i7-930 Bloomfield 2.8GHz LGA 1366 130W
    MSI N460GTX Cyclone 768D5/OC GeForce GTX 460 (Fermi) 768MB
    6 GB DDR3 Kingston PC3-10700 8-8-8-24 timing
    Kingston SSDNow V Series 64GB
    Areca ARC-1120 RAID controller (configured RAID6)
    4x Hitachi Deskstar HD31000 1TB 7200 RPM SATA
    2x Samsung 1TB 7200 SATA
    LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30
    Power:
    XFX Black Edition P1-750B-CAG9 750W ATX12V v2.2 / ESP12V v2.91 SLI Ready CrossFire Ready 80 PLUS SILVER
    Single +12V rail, +3.3V@24A, +5V@30A, +12V@62A, [email protected], [email protected]
    From XFX site regarding this PS:
    Tight voltage regulation (±3%)
    Single, high power +12V rail (up to 62A/744W)
    DC to DC voltage Regulator modules for +3.3V and +5V
    High quality Japanese brand capacitors (105°C)
    Solid polymer caps provide enhanced reliability and stability
    Quiet 135mm ball bearing fan provides superior cooling
    Supports multiple high-end graphic adapters (NVIDIA SLI & ATI CrossFire Ready)
    Detachable modular cables
    Energy Star 4.0 and RoHS compliant

    Can you test the card in another system, yours or a friends?

  • MSI N460GTX Cyclone 1GD5 not being recognised

    I am upgrading an older HP Pavilion pc that has onboard graphics, full list in the signature file.  Installed new power supply & moved 2 PCI cards down 1 slot @ to make room around the PCI-e slot and confirmed all was responding fine before installing the new MSI N460GTX Cyclone 1GD5 graphics card.  I am (attempting) using this as a single card only.
    After initially getting nothing on first start-up I realized after searching here that both PCI express power inputs needed to be connected.  Simple change with modular cables included with new 600W power supply, although it would have been nice to have been able to find this info included with the documentation.
    this time it came up in a 640x480 mode but the card is not showing up in device manager and when attempting to install drivers from the included disc it did not even show driver options link available and basically acted like the card did not exist even though my monitor was connected to it and functioning in a low resolution mode. On a reboot my system then would not progress past bios menu.  I could enter bios setup & confirm settings, save & exit ok but then it would hang up, locking up keyboard & all at same point (NVload ok!) on every reboot.
    I reconnected to onboard graphics with the Cyclone card powered off & all comes up normally.  i am not seeing any indication within device manager of its existence other than "unknown device".
    there has only been one bios update for my pc since the one i am currently using and it was only intended to address an issue with "hibernate" mode.
    any ideas?

    Quote from: redlouis1 on 28-January-11, 06:35:09
    Ok, I finally got another chance to tackle this one. I first tried disabling the onboard ATI Radeon graphics processor from device manager in "safe mode".  when i got the same results I then used Driver Sweeper to clean all ATI drivers and yet STILL had same results on reboot.
    *I can boot up in a "normal" 800x600 mode connected to onboard monitor port with PCI-x 460GTX powered off but I can't go ahead and install NVidia drivers because the system can't see the device.
    *When I reboot with the PCI-x 460GTX powered up, the onboard port is disabled.  The monitor connected to the PCI-x 460GTX port displays normal boot up info all the way until "CHECKING NVRAM..Update OK!" at which point nothing more happens and keyboard appears to lock up.  
    Am I not waiting long enough (5 minutes) before giving up ?
    The only connectors i see are the 2  6-pin power inputs and the onboard fan connection which runs fine.  am i missing something ?
    please help.  i really want this to work!
    Try with better PSU... not Ultra ...
    @demonwhisperer
    If you have some issue open new own topic and don't hijack this one!
    >>Please read and comply with the Forum Rules.<<

  • "Miffed.." MSI N460GTX Cyclone 1GD5/ MSI 975X PUE Platinum.

    Right can someone please care to explain to me, why this card requires not one but TWO 6 pin PCI-Ex connectors... which both have not one but TWO 4 pin Molex connectors.
    Giving a grand total of 4 Molex connectors..
    My PSU has 4x Molex and 1X SATA, I'm running 3 SATA drives and 1 DVD-Rom drive.
    So I've had to ditch the extra drives so I could use the card.
    Why can't the 4 pin Molex - 6 Pin PCI-Ex cables run off one single Molex plug instead of two?
    I have two 12V rails from my PSU and both come from the PSU with their own single cable, which is spliced at the end... what's the point in using two plugs, both on that same splice when they both come from the same source?!
    That's not the only thing, I have a lovely 4 pin Molex header on my main board next to the Primary PCI-Ex 16X slot, but it has pins... and guess what, so do the 4 pin Molex to 6 pin PCIEx connectors, so it renders it useless!
    So a summation of questions.
    Why two 6pin PCI-Ex headers on the card.
    Why two 4 pin Molex plugs on the 6 pin PCI-Ex to 4 pin Molex converter?
    Why have a Dedicated Molex header on the Main board which you can't physically connect to?
    Me thinks the producers of this product need to scratch their head and re-think future products as it strikes me as idiotic.
    P.s. Not once did I see ANY reference ANYWHERE to requiring four 4 pin Molex plugs to run the card.
    Rant over
    I'd love to see the reasoning behind it.

    Thanks for your replies guys.
    Yes I can see that spreading current across two connectors will increase the capacity, but to spread it again over another two 4 pin Molex's seems a bit strange, considering the end it connects to is just piggied off the first plug, leading to one rail on the PSU. (4 wires, not 8!)
    The power supply is only about a year old, but indeed is a cheap Bay of E Jobby.
    So your saying the Molex header on the mainboard itself is to stick a 12V from the PSU into?
    I thought it was there to power a PCI-Ex card using the adaptor cable, the manual refers to it as "JPWR"
    Quote
    "ATX 12V Power Connector: JPW/ JPWR
    And the JPWR 12V power connector is used to provide power to the PCIEX16 graphics card"
    With the cables provided with the new card, they have a total of 4 plugs, but all pins, so unable to connect to "JPWR"
    # Intel Core2Duo E6300 @ 2.10
    # MSI 975X Platinum Power Up Edition
    # 4GB (2x2GB Corsair XMS2 DDR2 6400)
    # MSI N460GTX Cyclone 1GD5
    # 1x Seagate SATAII 300GB 7200RPM, 2x Seagate SATAII 1TB 7200RPM
    # Dvd-Rom (IDE)
    # Audigy Gamer
    # Windows 7 64Bit
    # Bay of E Cheapo, 500Watt max Rail 1 18A Rail 2 15A 1xATX 4XMolex 1XSATA 1X12V ATX
    I did a fair bit of research before buying this card, I settled on it because of my experiences with MSI as my Mainboard.
    The Gigabyte one was 3 euro's cheaper and offered more or less the same bang for buck, and I was looking to keep this card for a number of years (I'm a student with a negative cash flow!) and hopefully make it last my next mainboard/cpu/ram upgrade (When I will actually get PCI-Ex 2.0!)
    It just strikes me as odd when you look at a card and go "Oh, I'll need 1 6-pin Pci-ex connector, I can connect it to the mainboard with the provided header." Then discover you can't actually connect to the main board's provided header... Then discover there's actually TWO connectors... and both of hem require TWO Molex's to function... Grand total 4.  And none of this was in any literature or specifications provided at all anywhere.
    I don't know but maybe the Gigabyte one only uses one 6pin pci-ex power plug.. Maybe it only uses one molex to convert to it. I have no clue, I haven't researched that particular product.

  • Will Nvidia update the driver for quadro 4000 for mac? When?

    Will Nvidia update the driver for quadro 4000 for mac? When?

    Not sure when/if they will make an update to the Quadro 4000 driver but I've been running the current driver without any issues.
    Are you experiencing any problems? If so please explain.
    Here the links to the latest driver:
    http://www.nvidia.com/object/macosx-cuda-5.5.28-driver.html
    http://www.nvidia.com/download/driverResults.aspx/68439/en-us
    Thanks,
    Peter Garaway
    Adobe
    Premiere Pro

  • Amber update but map and bere drive not work

    After amber update my here map and here drive not work just open the app but not open and close automatically

    Same thing here. I have tried all things and have a similar issue
    http://discussions.nokia.com/t5/HERE-Location-base​d-services/Settings-gt-Applications-does-not-have-​...
    NOKIA NEED HELP HERE !!

  • After doing a widows update itunes will not work at all

    after doing a widows update itunes will not work at all

    hiya!
    I get the itunes has encounterd a problem and needs to close, sorry for the inconvenience error, no specific error number. I do not have QT installed,
    not having QT installed is what will be causing your itunes error message at the moment. let's try a careful standalone QT 7.1 install.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
    love, b

  • Probook g1 450 4th generation Intel Graphics Driver Not working

    After Updating Baios my laptop , graphics driver not working . install successfully but when    click the graphics driver icon , it's show the  massage ,GfxUiEx has stopped working .
    i am worried about it . what can i do ??
    i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
    massage is :

    @Ariful11 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Update process does not work on Tabular Form

    Hello,
    I have 2 tabular forms on one page, which are using manual update processes.
    First form is created using wizard, and therefore works perfectly.
    The update process is as follows:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Second form is created manually, using the following code:
    SELECT apex_item.checkbox (30,
                               '#ROWNUM#',
                               'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                               NULL,
                               'f30_' || '#ROWNUM#'
                              ) delete_checkbox,
           CATALOG_ID,
              apex_item.hidden (31, CATALOG_ID)
           || apex_item.text (32,
                              LANG,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || '#ROWNUM#'
           || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
           apex_item.text (34,
                           DESCRIPTION,
                           80,
                           100,
                           'style="width:255px"',
                           'f34_' || '#ROWNUM#'
                          ) DESCRIPTION
      FROM V_CATALOGS
    UNION ALL
    SELECT     apex_item.checkbox
                              (30,
                               TO_NUMBER(9900 + LEVEL),
                               'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                               NULL,
                               'f30_' || TO_NUMBER (9900 + LEVEL)
                              ) delete_checkbox,
               NULL,
                  apex_item.hidden (31, NULL)
               || apex_item.text (32,
                                  NULL,
                                  80,
                                  100,
                                  'style="width:100px"',
                                  'f32_' || TO_NUMBER (9900 + LEVEL)
               || apex_item.hidden (33, NULL) LANG,
               apex_item.text
                                               (34,
                                                NULL,
                                                80,
                                                100,
                                                'style="width:255px" '  ,
                                                'f34_'
                                                || TO_NUMBER (9900 + LEVEL)
                                               ) DESCRIPTION
          FROM DUAL
         WHERE :P18_TEMP = 'ADD_ROWS1'
    CONNECT BY LEVEL <= 1However, the update process does not work on this form.
    I created it using the first one as an example, but with the id's of the second form:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Also, both forms are opening in a modal pop-up dialog window.
    I use a Dialog Region plug-in for that.
    Please advise, what is causing a problem with update?

    Sloger,
    if this is your tabular form
    SELECT apex_item.checkbox (30,
    ...and this is your update statement
    FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
    ...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
    Thanks,
    Tyson Jouglet

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • Update Panel is not working browsers other than IE

    In SharePoint 2013, Update Panel is not working for firefox, chrome etc.

    Hi,
    From your description, my understanding is that you use
    <asp:UpdatePanel>tag in your code, but it does not work well in browsers except
    IE.
    I have test
    <asp:UpdatePanel>tag with code below, and it works well in IE, chrome, Firefox
    as the screenshot.
    <asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="true">
    <ContentTemplate>
    <asp:Label ID="lbl" runat="server" Text="Loaded" Visible="true"></asp:Label>
    <asp:Button ID="btn" runat="server" OnClick="btn_Click"/>
    </ContentTemplate>
    </asp:UpdatePanel>
    protected void btn_Click(object sender, EventArgs e)
    lbl.Text = "BUTTON CLICKED !";
    lbl.Visible = true;
    The screenshot below is my result(the first is result in Chrome, second is in Firefox and last is in IE):
    And you also could refer to this article:
    http://sharepoint.stackexchange.com/questions/72928/update-panel-not-working-in-firefox-2013
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Update debugger is not working

    Hi All,
    My problem is "Update debugger is not working" is not working.
    In VA02,  I am creating a EDI output type, before saving it i am going into debug mode activating the 'Update Debugger'.
    But after that a message is coming as 'Update debugging has been triggered' but debugger screen is not coming up.
    Please let me if you have inputs on this.
    Thanks
    Satyamkumar Jha

    >
    Satyamkumar Jha wrote:
    > Hi Saravraj ,
    >
    > Even if 1 session is opened then also it is not going for update debugging.
    >
    > Thanks
    > Satyam
    Did you check if a COMMIT statement is getting triggered(you can do that by placing a break point in the debugger at the statement COMMIT)? Click on F5 once the control reaches COMMIT statment and wait for a new session to
    get opened for debugging.
    Not sure, about the debugger that you are using(classical/New),  lately, I have faced issues with update debugging while using new debugger, it would be a good idea to cross-check in classical debugger.
    -Rajesh.

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

Maybe you are looking for