MSI N550GTX-Ti Cyclone OC GeForce GTX 550 Ti physical dimensions

Hi
I am trying to see if I can fit this card to my small box, which is Dell Inspiron 570 http://support.dell.com/support/edocs/systems/insp560mt/en/sm/sysboard.htm#wp1181576. Physical dimensions of the board are very tight, so I need more detailed physical dimensions of MSI N550GTX-Ti Cyclone OC GeForce GTX 550 Ti, 210x140x35 mm is not enough, is this information actually exists? Preliminary measurements shows that there is the possibility to fit this card, however the fan shroud (and fan itself) might be overlapping with mobo heatsinks.
Appreciate in advance for any info.

Thanks both of you for replies.
Presale form did not produced any good response, so I did paper 1-dimension model 1:1 scale and actually placed into PCI slot (bottom heatsink is actually rises above PCI slot about 3-4 mm, this made me worried), I liked the result and I already bought and installed this card (I took my PC to the store and tried right after the purchase, so I could return if no fir). As I was expecting card fit nicely, however Dell's craftsmanship getting worse and worse - I had to bent a few security pins at the back holder.
So, yes, this card fits perfect into Inspiron 570, fan shroud riches about half way over lower heatsink, but it has plenty of room in between, SATA ports are available. At idle this card is silent, at load don't know yet.
Thanks.

Similar Messages

  • MSI 870-G45 Motherboard - Can it fit two MSI GeForce GTX 550 Ti 1GB Cards?

    MSI 870-G45 Motherboard - Can it fit two MSI GeForce GTX 550 Ti Cyclone II 1GB Cards?
    I'm planning to buy a MSI 870-G45 ATX AM3 Motherboard and two MSI GeForce GTX 550 Ti 1GB Cards, in order to run multiple monitors.
    However my concern is that the cards might not fit into the motherboard.
    So could someone please tell me if those two cards will fit into the motherboard?

    It means that an x16 PCI-E video card will only get x4 lanes instead of x16 when used in that slot.
    http://eu.msi.com/product/mb/870-G45.html#/?div=Detail
    Quote
    Slots
    • 1 PCI Express 2.0 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
    • 1 PCI Express 2.0 slot with x4 operation (PCI Express Bus SPEC V2.0 compliant)
    • 1 PCI EXpress x1 slot
    • 3 PCI slots, support 3.3V/ 5V PCI bus Interface.

  • Black Screen during boot Nouveau EVGA GeForce GTX 550 Ti [Solved]

    Hello,
    First I'd like to start off by admitting that I'm a newb, so I apologize in advance if posting this was unnecessary, but I searched, and though I found many similar problems, I could not solve my problem.
    As stated in the subject line, I have an EVGA GeForce GTX 550 Ti, and I cannot make it work with the open source Nouveau driver.
    When I try to boot the screen goes black.
    If I use the onboard VGA, it works perfectly fine, however, when I switch over to the onboard DVI, my monitor never even gets a signal. I have an MSI board with the Z77 chipset and an Intel I5.
    I've tried installing the proprietary Nvidia driver and using that. It boots, the problem is I can't change the screen's resolution to anything other than 800 x 600 and my monitor is 1680 x 1050.
    I'd be happy using either driver as long as it works correctly.
    Oh yea, I'm running kernel 3.4.5 (which I believe is the latest) and the rest of my system is completely up to date, so please don't link me here: https://bbs.archlinux.org/viewtopic.php?pid=1102763
    Thanks in advance!
    -daniel
    Last edited by xleafr (2012-07-30 04:23:35)

    Okay, then onto the nvidia driver problem.
    I can't set the resolution to what I want (1680 x 1050). My only option is 800 x 600 which is pretty terrible.
    I've tried a few things with xrandr, but nothing worked.
    Yea, I was only using tty because when I start x everything was either too large or couldn't see the command line to start x in the first place.
    So how can I change my resolution (I've tried editing xorg.conf but once again, my attempt to solve my problem was fruitless).

  • NVIDIA GeForce GTX 550 Ti And AE CS6 OpenGL?

    Im going to get new computer soon and i was wondering if NVIDIA GeForce GTX 550 Ti is compatible with Adobe After Effects CS6? I would like to know if it does support OpenGL rendering with NVIDIA GeForce GTX 550 Ti, that would be great

    I get it, but i think it's a shame that such a great tool as raytrace is supported only by few cards, and very expensive too.
    I'm not a professional user of AE, i just enjoy some of my free time with it, but i was thinking of upgrading to AE6 license. Unfortunately, i discovered that it doesnt support my video card (Radeon HD6850) for GPU rendering and in this setup i can go to sleep before a frame is rendered ( Phenom II X4, 8gb ram, i know it's not that much, but 3DS max is not that computationally important).

  • Request:UEFI / GOP Vbios-MSI N650ti-2GD5/OC BE GeForce GTX 650 Ti BOOST

    I would like to request a UEFI / GOP Vbios for MSI N650Ti-2GD5/OC BE GeForce GTX 650 Ti BOOST if one is available. Thanks.
    s/n: 602-V287-140B1305052700
    current vbios:
    NVIDIA Firmware Update Utility (Version 5.118)
    Adapter: GK1xx                (10DE,11C2,1462,2875) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    Image Size            : 62976 bytes
    Version               : 80.06.59.00.10
    ~CRC32                : CB36F9F6
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300012
    Product Revision      : Chip Rev   
    Device Name(s)        : GK1xx
    Board ID              : E307
    PCI ID                : 10DE-11C2
    Subsystem ID          : 1462-2875
    Hierarchy ID          : Normal Board
    Chip SKU              : 240-0
    Project               : 2030-0012
    CDP                   : N/A
    Build Date            : 03/01/13
    Modification Date     : 03/14/13
    Sign-On Message       : GK106 P2030 SKU 12 VGA BIOS
    MSINV287MS.330

    I was wondering if I had same card as OP, but mine is Twin Frozr III
    So here's my request for UEFI / GOP Vbios
    S/N:602-V287-120B1305042441
    NVIDIA Firmware Update Utility (Version 5.142)
    Adapter: GeForce GTX 650 Ti BOOST (10DE,11C2,1462,2874) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    IFR Data Size         : 1208 bytes
    IFR CRC32             : 3536D3A0
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : EA95C17A
    IFR Subsystem ID      : 1462-2874
    Image Size            : 98816 bytes
    Version               : 80.06.59.00.0E
    ~CRC32                : F1ADD9DB
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300012
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 650 Ti BOOST
    Board ID              : E307
    PCI ID                : 10DE-11C2
    Subsystem ID          : 1462-2874
    Hierarchy ID          : Normal Board
    Chip SKU              : 240-0
    Project               : 2030-0012
    CDP                   : N/A
    Build Date            : 03/01/13
    Modification Date     : 03/14/13
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK106 P2030 SKU 12 VGA BIOS
    MSINV287MS.310
    VBios saved from GPU-Z:  **https://dl.dropboxusercontent.com/u/55915400/GK106.rom**

  • Request:UEFI / GOP Vbios-MSI N650ti-2GD5/OC BE GeForce GTX 650 Ti BOOST | split

    Hi
    I'd like a UEFI /GOP bios for my MSI N650ti-2GD5/OC BE GeForce GTX 650 Ti BOOST serial number:602-V287-19SB1303083950
    Can i use the one that is available on the post?
    Thanks in anticipation.
    Andy

    Hi Svet
    Thanks for your prompt reply.
    I have run the Nv flash tool and here is the text file.
    wondered if you could tell me when a UEFI bios will be available for my card.
    Thanks
    Andy
    NVIDIA Firmware Update Utility (Version 5.142)
    Adapter: GeForce GTX 650 Ti BOOST (10DE,11C2,1462,2874) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    IFR Data Size         : 1208 bytes
    IFR CRC32             : 3536D3A0
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : EA95C17A
    IFR Subsystem ID      : 1462-2874
    Image Size            : 98816 bytes
    Version               : 80.06.59.00.0E
    ~CRC32                : F1ADD9DB
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300012
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 650 Ti BOOST
    Board ID              : E307
    PCI ID                : 10DE-11C2
    Subsystem ID          : 1462-2874
    Hierarchy ID          : Normal Board
    Chip SKU              : 240-0
    Project               : 2030-0012
    CDP                   : N/A
    Build Date            : 03/01/13
    Modification Date     : 03/14/13
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK106 P2030 SKU 12 VGA BIOS
    MSINV287MS.310

  • Which one should I get? Radeon HD 6770 or Geforce GTX 550 Ti ?

    I've been told over the years that Nvidia has better support for Linux. But how are the (official) Linux drivers for both cards ? Right now I have a choice between Palit GTX 550 Ti and MSI HD 6770 for about the same amount of money.
    While Palit offers 2 a year warranty, and MSI offers 3, I tend to go with the Radeon because I already have an onboard Geforce 7025 (for "just in case") and the official drivers are ok.
    Any advice would be most welcome.

    DSpider, this has been discussed a lot. Have you searched the forums? Nobody is going to be able to give you advice on exact specific models as they themselves would have had to compare them to know what works.
    To get a general idea, search the forums and you will find multiple threads trying to figure out whether they should buy an ATI card or a NVidia.

  • What is the power requirment for MSI N550GTX-Ti Cyclone II 1G GDDR5/OC

    hello guys , i have a simple question and need an answer before buying that card N550 GTX Cyclone II 1G DDR5 OC
    what is the power requirment for this card
    i have a power supply with 450 Watt Cooler master , is it enough to run this card perfectiy?
    another question , what is your opinions about this card? is it good with the new games? and powerfull games? like Max Payne3 and BattleField 3,
     The witcher2 ... etc
    with Core i5 3470 IvyBridge 3.2GHz ,, and 8GHz Ram 1600 MHz ,, mother board ASUS P8B75-V , Western Digital Caviar Green 1TB HDD?
     thanks for this great Forum  

    Quote from: thephenom on 21-October-12, 14:23:28
    the other question please, whats ur opinions about this card? is it ok with powerfull games?
    GTX 550 and GTX 650 are budget (mid-range) GPUs.
    They are good for everything (including 3D games).
    However, in complex 3D games don't expect high FPS values.
    If you play games most of the time, you should go for GTX 560 / GTX 660.

  • Question about PNY - geforce GTX 550 ti

    I want to put this gpu on my pc: 
    PNY - GeForce GTX 550Ti 1GB GDDR5 PCI Express Graphics Card
    Model: VCGGTX550TXPB | SKU: 2264415
    This graphics card features 1GB on-board memory and 192 processors for realistic visuals. NVIDIA CUDA and PhysX technologies provide an enhanced, dynamic gaming experience.
     4 Read reviews (12)
    Sale: $149.99
    I have a PCI express 16x so it should fit. But I have seen this same GPU on amazon and it says its a PCI express 2.0. so my question is. Will this exact gpu fit in my PCI express 1.0 pc? Maybe here hey just forgot to inform that it is 2.0? thanks!

    As long as your power supply and case airflow are sufficient, yes. PCI Express 2.0 refers to the revision of the PCI Express technology and it is backwards compatible with PCI Express 1.0. PCI Express slots are either x1 (smallest) or x4 (small) or x8/x16 (regular size), so you should be fine with your x16 slot unless there is a hardware problem. Research your motherboard and power supply before you buy.

  • MSI GT70-2OC with NVIDIA Geforce GTX 770m: performance issues

    I've setup some games on my gaming laptop and I'm seeing lower frame rates with various games (30-50), and there is a "line" in the 3D graphics (I'm assuming that has something to do with the refresh rate). Any idea as to what might be causing this issue? Any ideas on how I can boost the performance of my GTX 770m?
    thanks,
    fb

    Quote
    It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
    Quote
    To me it sounds like a hardware issue (especially if you have rolled back to factory default and reinstalled from scratch)
    It wouldn't be a hardware issue since you can play other games without problem.
    Easiest way to tell if it's a hardware issue or not is to run the benchmark tool for example 3DMark 11 and see if the problem also happens during the benchmark.
    For the rendering problem you were talking, please provide not only the problem picture but also the picture without problem to let us make the comparison.
    I'm sorry to say, but some of the picture I'm not really getting what the problem you're talking about.
    For the shadow face, here are few user provided fix which might be helpful.
    http://forums.steampowered.com/forums/showthread.php?t=2282965
    http://forum.bioware.com/topic/55984-shadows-way-too-darkblack-intendedscreenshot-solved/
    Quote
    Re-installing DirectX and PhysX.
    NVIDIA moderator says some of the games is required to play some older Physx games, but not sure if it works.
    If you would like to have a try.
    https://forums.geforce.com/default/topic/524066/geforce-drivers/official-nvidia-r310-61-beta-display-driver-feedback-thread-released-11-20-12-/post/3714758/#3714758
    I'd suggest to post the issue on EA, steam or obioware and see if there are people looking into it.

  • Geforce GTX 550 Ti doesn't resume from sleep mode sometimes after BIOS update

    Hi there,
    I updated the BIOS of my main board Z68A GD65 (G3) yesterday to the latest version on the MSI site (E7681IMS.P80)  and I noticed that my PC doesn't always resume correctly from sleep mode now.
    It seems that it works when I resume immediately, but after a nights rest the display remains black, although it looks like the PC itself is starting correctly (mouse, keyboard hdd etc)
    Anyone know what this could be? Should i change a setting in the BIOS maybe?
    Marcel

    I`ve updated BIOS but problem wasn`t solved. 
    Did someine else face with problem?
    Thanks.

  • CS6, GeForce GTX 550 Ti, crashing very often

    I am new to Premiere Pro (FCP refugee).  I m using Mac and everything is up to date.  PP is crahing verry often, main window vanishes and bins stay on screen.  I have for force exit.
    Any advice,
    Ben

    Yes, sorry about that.  Here is some more info but may have to wait untill I can have another proper session with PP to get everything.
    Premiere Pro 6.0.1, all current updates installed. 
    Mac OS X 10.7.4, 8GB memory.
    Canon AVCHD Fottage
    Also running FCP 7.0.3 and rest of Adobe Production Premium CS6.
    I think it said 'Fatal error', will update post when I can confirm (had to go back to FCP to finish project but will try again when I get some time0.
    I have a Blackmagic Intensity Pro Installed.
    Ben

  • GeForce GTX 550 on Mac Pro?

    Can I use this card on a Mac Pro? I'm not sure Apple ever supported it, so I have no idea where I might get the drivers, if they even exist. Can anyone help?

    Not sure about under 10.6.x, but I'm running one on my 2010 MP under 10.7.3. There are a few little quirks with it (VRAM isn't reported correctly in system profiler, and you need to pull a bit of voodoo to get OpenCL working), but yeah, if you go and grab the newest driver and CUDA driver from NVIDIA's site and load that up, you can use one of these out of the box. If you don't already have one and are looking to buy, I've heard that the 580s behave better "out of the box" but don't have one myself so can't confirm.

  • GTX 550 Noise issue

    I just ordered components for a new computer and everything is working great, except for the video card.  Any time I run a graphic intensive game, nothing spectacular, the card makes some strange noises.  I'm not talking fan noises.  I'm trying to find out if this is an expected behavior.  If not, I want to be sure to send it in and get a replacement.
    The video card I purchased is this:
    MSI N550GTX-Ti Cyclone OC GeForce GTX 550 Ti (Fermi) 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
    Example, after connecting to a server in Lord of the rings online, the intro screens start to display and that is when my card starts making noise.  If I minimize the program, the sounds stops. 
    My understanding was that this card should be quiet, but this is far from it.  I have a MSI Cyclone GTX 460 in my other computer and it is great, so I expected no less from this.  Can someone tell me if this is normal or if I should return this to newegg or to MSI?

    Quote from: wprather on 13-April-11, 03:04:04
    I just ordered components for a new computer and everything is working great, except for the video card.  Any time I run a graphic intensive game, nothing spectacular, the card makes some strange noises.  I'm not talking fan noises.  I'm trying to find out if this is an expected behavior.  If not, I want to be sure to send it in and get a replacement.
    The video card I purchased is this:
    MSI N550GTX-Ti Cyclone OC GeForce GTX 550 Ti (Fermi) 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
    Example, after connecting to a server in Lord of the rings online, the intro screens start to display and that is when my card starts making noise.  If I minimize the program, the sounds stops. 
    My understanding was that this card should be quiet, but this is far from it.  I have a MSI Cyclone GTX 460 in my other computer and it is great, so I expected no less from this.  Can someone tell me if this is normal or if I should return this to newegg or to MSI?
    Quote
    My understanding was that this card should be quiet, but this is far from it.  I have a MSI Cyclone GTX 460 in my other computer and it is great, so I expected no less from this.  Can someone tell me if this is normal or if I should return this to newegg or to MSI?
    Can you test the card in your other computer to isolate the issue? As the noise can comes from the PSU or something else.

  • MSI Twin Frozr II GeForce GTX 465 - N465GTX: Won't Display Video

    My computer had been working perfectly fine up until a few hours ago when I tried starting it up from a hibernation state. Any attempts to power down and power back up again has been met with the same issue. No picture. The display will flash though. And on bootup, it looks like it's trying to display the intro screen for my motherboard, but I can't really tell. It's just a split second of color and light periodically flashing on the screen.
    Just this morning, I had upgraded the Nvidia drivers to I believe the latest (296.10). So I'm wondering if that caused the issue. Again, my computer had been running perfectly for months.
    My system information
    GPU:
    MSI N465GTX Twin Frozr II GeForce GTX 465
    OS:
    Windows 7 Ultimate Edition - 64bit
    CPU:
    AMD Phenom II X4 965 Black Edition Deneb 3.4GHz Socket AM3 125W Quad-Core Processorhttp://www.newegg.com/Product/Product.aspx?Item=N82E16819103727
    Motherboard:(I don't know how to check the BIOS being unable to see anything.)
    MSI 890FXA-GD70 AM3+ AMD 890FX SATA 6Gb/s USB 3.0 ATX AMD Motherboardhttp://www.newegg.com/Product/Product.aspx?Item=N82E16813130274
    Memory:
    1)CORSAIR XMS3 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model CMX8GX3M2A1333C9http://www.newegg.com/Product/Product.aspx?Item=N82E16820226095
    2)Mushkin Enhanced Silverline 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model 996770http://www.newegg.com/Product/Product.aspx?Item=N82E16820145315
    PSU:
    Antec TruePower New TP-750 Blue 750W Continuous Power ATX12V V2.3 / EPS12V V2.91http://www.newegg.com/Product/Product.aspx?Item=N82E16817371022
    Hard Drive:
    Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drivehttp://www.newegg.com/Product/Product.aspx?Item=N82E16822136284
    Optical Drive
    LG Black Blu-ray Disc Combo SATA Model CH10LS20 R LightScribe Support http://www.newegg.com/Product/Product.aspx?Item=N82E16827136189

     Are you mixing 2 different brands of RAM, Corsair and Mushkin?
     If you are don't do it, remove the Mushkin and try again with just one stick of the Corsair in DIMM1 slot for testing to see if you get the video back.
     As far as MB BIOS goes if you've never flashed it you can find what the original is on the sticker on the BIOS chip, location shown by the red square.

Maybe you are looking for

  • Calculation of dates_service profile not taken into account

    Hello everyone, I am trying to make dates calculation based on working days only. I have read few posts on the scn and known by experience that it should work with customizing service profile on crmd_serv_sla. However, after making all steps, it does

  • Error while adding oracle as a source system to BW

    Hi Experts, I am trying to connect BW to the oracle database. While connecting I am getting the error "Source System XXXXX Cannot Be Accessed". I checked for the TNS name and Connection Info in TNSNAMES.ORA  and everty thing seems to be good. Please

  • How can I get my photos off my iPhone 3 eventhough I don't have a sim card any longer?

    I have an old iphone (pre iphone 4) and moved to Sweden. I want to get my photos off the phone, but no longer have any Sim card of any kind. Is there any kind of workflow or solution I can try to get them to my MacBook Pro? (My itunes says it can't r

  • Newly updated iTunes U app speed button doesn't work!

    Can I revert to previous version until this bug is fixed? Anyone else having this problem? Would someone please update the iTunes U app download an audio lecture and hit the speed button ("1x" lower right hand) and see if it works? Thanks!

  • Can't open Office 2011 in Mountain Lion

    I can't open Excel or Word from Office 2011 after upgrading to Mountain Lion. I've removed all files from Microsoft and reinstalled but still can't open them. Any ideas?