MSI N560Ti Twin Frozr II OC Edition Temp to high

Hello svet, im from argentina too
Ive a problem with a MSI N560 GTX - TI Twin Frozr II / OC edition (1024 M )
Serial N: 602-v238-220b110905319
Like 4 months ago, one of the original fans from the cooler just broke up (stop working) so i got a Deepcool 4600 in replace
(this monster)
After installing in that moment the new cooler, temps went down like a champ (60ª full load temp)
A few days ago, i decided to recheck my temp again only to see how are the things going, and i found something weird
The GPU Temp was rising till 100º c in full load.
That was something imposible becouse in that case , the gpu will just stop working and the system will shutdown. So i decided to check the things , open up my V9 Black edition case, and check the thermal paste (artic silver 5) in the GPU. Nothing strange, i just reapply the tim and installed the vga again in place
Well , things went the same deal like before. Gpu hitting 100ª in like 8 - 9 seconds after opened a game, every time i just hit ALT TAB and drop to ws, the temp goes down to 35ª in like , i dunno, 3 seconds or less. Tab back in game, and after 5 - 6 seconds went up again
Just formated, installed clean drivers, same deal, but i managed to hit 80ª this time in cs:go (just to test) with vsync on tripple buffer , max settings and MAX_FPS 45
After a while (maybe less than a minute) temp hit again the 90º wall, and it was to late to keep testing.
Is it posible that a sensor is damaged? couse i didnt notice the heat that excesive inside the case, i mean i put my hand over the VGA (not touching, only hovering over) and the vga was hot but not at 100º def.
Is it posible for a card to cold that quickly? (from 100 to 30 in 5 seconds).
Can my bios be faulty?

btw this is the attachment
Code: [Select]
00, 04-06-2013 20:11:19, Hardware monitoring log v1.4
01, 04-06-2013 20:11:19, MSI N560GTX Ti Twin Frozr II
02, 04-06-2013 20:11:19, GPU temperature ,GPU usage ,Fan speed ,Fan tachometer ,Core clock ,Shader clock ,Memory clock ,Memory usage
03, 04-06-2013 20:11:19, 0 ,°C ,0.000 ,100.000 ,10
03, 04-06-2013 20:11:19, 1 ,% ,0.000 ,100.000 ,10
03, 04-06-2013 20:11:19, 2 ,% ,0.000 ,100.000 ,10
03, 04-06-2013 20:11:19, 3 ,RPM ,0.000 ,10000.000 ,10
03, 04-06-2013 20:11:19, 4 ,MHz ,0.000 ,1500.000 ,10
03, 04-06-2013 20:11:19, 5 ,MHz ,0.000 ,3000.000 ,10
03, 04-06-2013 20:11:19, 6 ,MHz ,0.000 ,5000.000 ,10
03, 04-06-2013 20:11:19, 7 ,MB ,0.000 ,3072.000 ,10
80, 04-06-2013 20:11:20, 32.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.965
80, 04-06-2013 20:11:21, 32.000 ,3.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.480
80, 04-06-2013 20:11:22, 32.000 ,2.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.480
80, 04-06-2013 20:11:23, 32.000 ,2.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.480
80, 04-06-2013 20:11:24, 32.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.480
80, 04-06-2013 20:11:25, 32.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.480
80, 04-06-2013 20:11:26, 32.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.598
80, 04-06-2013 20:11:27, 32.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,78.598
80, 04-06-2013 20:11:28, 34.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,80.098
80, 04-06-2013 20:11:29, 36.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,131.145
80, 04-06-2013 20:11:30, 60.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:31, 66.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:32, 73.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:33, 78.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:34, 83.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:35, 88.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:36, 91.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:37, 95.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:38, 99.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:39, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:40, 99.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:41, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:42, 99.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:43, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:44, 99.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:45, 100.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:46, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:47, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:48, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:49, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:50, 99.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:51, 100.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:52, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:53, 99.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:54, 99.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:55, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:56, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:57, 100.000 ,99.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,167.520
80, 04-06-2013 20:11:58, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:11:59, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:00, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:01, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:02, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:03, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:04, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:05, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:06, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:07, 100.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:08, 101.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:09, 101.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:10, 101.000 ,99.000 ,100.000 ,0.000 ,441.160 ,882.321 ,2097.900 ,167.520
80, 04-06-2013 20:12:11, 84.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,78.598
80, 04-06-2013 20:12:12, 78.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,78.598
80, 04-06-2013 20:12:13, 74.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,78.598
80, 04-06-2013 20:12:14, 72.000 ,1.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,78.598
80, 04-06-2013 20:12:15, 70.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,78.598
80, 04-06-2013 20:12:16, 68.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,78.598
80, 04-06-2013 20:12:17, 66.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,78.031
80, 04-06-2013 20:12:18, 65.000 ,0.000 ,100.000 ,0.000 ,882.321 ,1764.642 ,2097.900 ,77.617
80, 04-06-2013 20:12:19, 61.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:20, 58.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:21, 55.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:22, 53.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:23, 52.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:24, 50.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:25, 49.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:26, 49.000 ,0.000 ,100.000 ,0.000 ,405.000 ,810.000 ,324.000 ,77.617
80, 04-06-2013 20:12:27, 47.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:28, 46.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:29, 46.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:30, 45.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:31, 44.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:32, 44.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:33, 43.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:34, 43.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:35, 42.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:36, 42.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:37, 42.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:38, 41.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:39, 41.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:40, 41.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:41, 40.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:42, 40.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:43, 40.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:44, 40.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:45, 40.000 ,3.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:46, 40.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:47, 40.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:48, 39.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:49, 39.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:50, 39.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:51, 39.000 ,1.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:52, 38.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:53, 38.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:54, 38.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:55, 38.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:56, 38.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:57, 38.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617
80, 04-06-2013 20:12:58, 38.000 ,0.000 ,100.000 ,0.000 ,50.625 ,101.250 ,135.000 ,77.617

Similar Messages

MSI N570GTX Twin Frozr III Power Edition/OC memory clock?

I have had an MSI N570GTX Twin Frozr III Power Edition/OC for about 6 months now and have used MSI Afterburner to monitor temps etc. Today I used it to lower my overclocking as others had said Ghost Recon Future Soldier doesn't crash if you take it off.
If you look at the MSI product page for the card (the forum won't let me post a link to it!?) you can see the Memory Clock Speed(MHz) says 4000 yet in Afterburner mine said 2000Mhz and the slider was in the middle. I am pretty sure there is no multiplier at work here so mine wasn't being overclocked?
Any ideas? I have reduced it down to 1800Mhz and GRFS doesn't crash anymore but can I take it up to 4000Mhz safely in future? I do not want to overload the card.

you have multiply the memory value x2 to get the effective speed

Two displays for MSI R6950 Twin Frozr III Power Edition/OC graphics card ?

Is it possible to have two displays simultaneously connected to this graphics card:
http://www.msi.com/product/vga/R6950-Twin-Frozr-III-Power-Edition-OC.html#?div=Overview
The card has two DVI-outputs "DVI Output: 2 (Single-Link DVI-D x1, Dual-Link DVI-I x1)". I can use one display at a time and the second display only shows "No signal" error. I would like to use two displays when playing PC games, is it possible with this craphics card? Both my displays have VGA connector cables, and they are connected to the card with an VGA/DVI adapter.

Quote from: Svet on 19-January-12, 22:12:52
what monitors you are using and what resolutions you're trying to use?
Both monitors are old models: 1) Panasonic PanaFlat PF90 2) acer AL 707.
I'm not sure what resolution I was using on acer when I tried to connect both monitors, but now I'm using PanaFLat with 1280 x 1024. Maybe I should try to set them both on 1024 x 768 and try again.

MSI R6950 Twin Frozr III Power Edition – Replacement Heat Sink?

Hello,
Does anyone know of a good 3rd party heat sink that will definitely fit this non reference card? We all know that manufactures such has Artic, Thermalright and Prolimatech make such heat sinks, but of course they are for reference cards. I'm sure you can understand that I don't want to make any expensive mistakes!
Thanks,
Krutish.

Thanks for the reply flobelix.
My main concern was the amount of decibels this card produced when pushed, not its thermal properties. Under high stress the card would peak at 80-85c with a fan speed of anywhere around 80-100%. Normal gaming temps would be around 65c-75c depending on game, or gaming environment, with matching fan speeds. That is why I was looking for a replacement, the temps were within the manufactures tolerances, even if a little high, but the db's were well outside of mine!
However, the situation as changed somewhat. While messing around inside the case trying to improve airflow I accidentally touched the heat-sink assembly, and upon doing so the fan instantly roared to 100% and the temps started to shoot up. I wiggled the assembly again and the fan and temps dropped back! So it seemed like the heat-sink was lose! I removed the card and tightened the screws a little, this solved the problem in regards to the temp/fan shooting up, but the temps were still high!
The next step was to completely remove the heat-sink, give it a good clean and replace the thermal compound in the hope that this would solve the noise/heat problem. It was at this point that I spotted the problem! The GPU was absolutely caked in thermal compound, so much so that all of the resistors around the GPU were also covered in thermal grease, (Don't these guys know less is better?) good job they hadn't used a metal based thermal compound, that could have wrecked the card!
Anyway, I removed the mess and used TIM-clean to dissolve what was left and finished the clean up with isopropanol. I applied a small amount of compound, replaced the heat-sink and Bobs your uncle! Max loads so far, GPU 64c – Fan speed 55%... That I can live with!
So there you have it, this card as been noisy and running hot from the day I brought it, but I didn’t know any better, I've never seen or heard a MSI R6950 in action before, now I have!
Made In China. (Sad Face)
Krutish
Oh almost forgot... i heard off Artic, they recommend the Twin Turbo II, Xtreme II or the Xtreme III for this card!

MSI 570GTX Twin Frozr III Power Edition

How far am I able to safely push the voltages in afterburner?

Quote from: Svet on 23-June-12, 04:50:05
the one that you can able to set
Yes Svet is right just like Guru3d says : unless you don't mod/unlock Afterburner then what Afterburner reads it is the safe voltage for your card.
I used to have MSI GTX570 TFII OC and got stable daily 930/1100 with 1.075 Volt. Max was 970/1100 with 1.100 Volt only for benches not gaming
Daily usage :
For 950MHz I need to use max VGPU 1.1 Volt for stable daily gaming but it was abit hotter temp max beyond 70 C but still under 80 C so I choose 930MHz for daily usage.
MSI cards are good for overclocking especially TwinFrozer or Hawk or Lightning series too bad now I will have ASUS GTX570 DCUII ... I was searching a used card ^_^

MSI GTX580 Twin Frozr II OC Edition; Battlefield 3 green squares artifact crash.

Greetings respected moderators!
I came to your forum because I seek your help. Allow me to explain my problem. Today when I've played Battlefield 3 after a while my game crashed - it froze in place. The screen displayed small green square artifacts all over the screen. I had to force shut down the game with task manager in order to resume using my computer. I've restarted my game and continued playing it until it happened two more times in a short amount of time. Then I've decided to look into it.
This is what my screen looked liked, although this image is not mine. I'm only using it as a reference.
The most interesting thing is that I've only had this happen to me(exactly the same type of crash) once or twice in the past when I still had the old drivers. Back then I was using High video settings in my game. About a week or so ago I formatted my computer and installed the latest NVIDIA drivers - 310.90. This time I was using the lowest video settings in my game. Yet the game crashed more than it did with the higher settings. This puzzles me...
I did some research on the internet and what I've found out is that this type of crash is very commonly associated with GTX 580. Users with the same problems posted on many forums and the replies they got were all sorts of possible reasons why this crash occurs. One of them is being overheating. I've tested that and ran my game the fourth time after my third crash, and the temperatures of the GPU didn't go over 70°C. Then I've also did a stress test with MSI Kombustor and the temperature stayed under 70°C. So I believe I can exclude overheating.
The next very common thing that users wrote was that the GTX 580's core voltage was set too low by factory default, causing this type of crash with DirectX 11 games while playing them. By manually increasing the voltage it seemed that it was the most common fix for the problem. According to MSI Afterburner my core voltage is 1025 and people on the forums suggested raising it to 1100, therefore fixing their crashing.
Third thing that I've read was that this is caused by the latest 310.90 drivers. Some users with the problems reverted to the old drivers and the crashing stopped, while it didn't fix it for others.
Now my questions is: Why did my game start crashing all of a suddenly, in such way on lowest video settings and so frequently, when I could play it for months on end with higher settings without a single crash?
I do not want to overclock my GPU and unfortunately I do not remember which were the NVIDIA drivers I was using before I formatted my computer.
I thank you in advance, wise moderators of this forum and hope that you will be able to help me.
Have a wonderful day!

Good day to you Svet!
Like I've wrote before, the only changes I did to my computer were the updates that came with Live Update 5. I only installed driver updates through that. I did it regularly ever since I've got my computer 7 months ago. Back in those 7 months the crash only happened once or twice.
Then a week ago I formatted my computer completely, reinstalled Windows 7 and also applied all of the available updates that came with Live Update 5. I've also downloaded the latest NVIDIA GPU drivers. The game worked flawlessly for the whole week until it started crashing yesterday.
Also I had no idea that the overheating could start at under 70°C, especially because I have two extra fans installed, one in the front and one in the back of my case so that there is regular flow of cold air, which enters in the front and exits at the back.

MSI N570GTX Twin Frozr III Power Edition/OC Bf3 crash ?

I used to play bf3 with high setttings but now ı start using ultra,now it stutters like freezes then it crashes especially when I zoom in with sniper rifles ,I saw people play this game with this card in ultra settings butter smooth in youtube ,is it about getting hot or my 4 gig ram is not enough ,any of u guys have any idea ,maybe the psu not enough ?
my specs highpower 650 w
4gb ram
e2500k
4 gskill ripjaws

What are your GPU and CPU temps like when attempting the game at those settings ?
Could be temp related.
On paper the PSU looks OK, but the practice may be a different story. Perhaps you are able to test with a PSU that provides 35-40Amps on a single 12V rail? Friend or family. Thats the only way to see if it is the PSU.
What about drivers ? Have you checked the Nvidia websit to see if any of the release notes speak about this?

R6870 Twin Frozr II OC Edition

Intel 2500K OC'd to 4.5 Ghz Stable
ASUS P8P67-M Pro
Mushkin Blackline Enhanced 8GB 2x4 12800
MSI R6870 Twin Frozr II OC Edition
WD 500 GB HD and SG 250 GB @ 7200 RPM
Antec HCG 520W PSU
Windows 7 64 Bit
I've been running this card a couple months now and idle temps are always 60-63 and load temps are always 100-103.
These seem really high and I've grabbed the temperatures from various programs that all report the same thing. I have yet to try to reseat the card, etc, but that is my next step.
I've read that temps should be quite a bit lower than this and I'm worried about the longevity of my card.
Edit: Reseated card, no change; removed HS and re-applied thermal paste and still no change. Not really sure what to do now.

After all my searching on the internet for hours, I have never read this problem or this fix.
However, I re-did the thermal paste again to be safe, but then I used a different screw hole to mount it down. I think I might have been using the wrong one that wasn't in line with the card, which may have been causing slight warp, or enough that the heatsink wasn't dissipating the heat properly. Get perfect temperatures now. 60-70 depending on the game under load.
However, might want to mention this to people that try everything and never seem to figure it out.

570 twin frozr III power edition oc unstable

Hi,just finished building my new rig (i52500k,p8z68-v-pro gen3 and msi N570GTX Twin Frozr III power edition OC)but my card appears to be unstable out of the box,crashing straight away on 3d mark,i'm getting display driver stopped responding error.
I've done a clean install of drivers etc,and only when i use afterburner to up the core voltage by 25mV does the card become stable.(have not tried less voltage)
Why isnt it working at stock voltage ?
I even tried bf3 using the card at fully stock settings,and it crashed minutes into the game

Sounds like the same problem i was having https://forum-en.msi.com/index.php?topic=155348.0
Most games would crash 10-30 seconds into the game, battlefield 3 lasted about 2-3 minutes before crashing and restarting.
Now i have a decent power supply unit no more crashing just hours of fun gaming

GOP / UEFI Vbios requests for: MSI R7850 Twin Frozr IV PE OC

I would like a UEFI/GOP VBIOS for my MSI R7850 Twin Frozr IV Power Edition 2GD5
S/N: 602-V273-13SB1208035932
BIOS Version: 015.015.000.002.000000
Thanks in advance.

Thank you very much!

MOVED: Can I unlock 6950 Twin Frozr III Power Edition to 6970 shaders?

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=148995.0

Quote from: v1p3r on 25-May-11, 09:02:27
Hi,
I have purchased the MSI 6950 Twin Frozr III Power Edition.
I was wondering if it can be unlocked to the 6970 shaders? Thanks.
OK, HERE IS THE SKIVY, THE MSI R6950 TWIN FROZER 3 PE OC 2GIG, DOES UNLOCK, I FLASHED THE CARD WITH SUPPLIED BIOS FROM MSI, R6950PEX.BIN IT UNLOCKS ALL, VOLTAGE CORE, OVERCLOCK, ETC. I DID NOT SEE ANY CHANGE HOWEVER IN THE SHADERS, MY GPU-Z IS THE UP TO DATE VERSION. SO NOT SURE IF THEY UNLOCK OR NOT. I ALSO PURPOSELY FLASHED A 6970 BIOS, ON THE CARD AS WELL // CRASHED IT. FLICKED THE **BIOS SWITCH** & BOOM IT BOOTS UP NO PROBLEM, IN WINDOWS, RUNNING, I SWITCHED IT BACK, & REFLASHED THE ORIGINAL BIOS OVER THE 6970 BIOS.....SO FAR EVERYTHING WORKS AWESOME // GREAT DESIGN HERE....THIS IS MY FIRST RADEON BASED CARD IN LIKE 15 YEARS // GONNA PLAY SOME MORE & I WILL REPOST WHEN I FIGURE OUT THE SHADERS.........MrStude2r5

Can I unlock 6950 Twin Frozr III Power Edition to 6970 shaders?

Hi,
I have purchased the MSI 6950 Twin Frozr III Power Edition.
I was wondering if it can be unlocked to the 6970 shaders? Thanks.

Quote from: v1p3r on 25-May-11, 09:02:27
Hi,
I have purchased the MSI 6950 Twin Frozr III Power Edition.
I was wondering if it can be unlocked to the 6970 shaders? Thanks.
OK, HERE IS THE SKIVY, THE MSI R6950 TWIN FROZER 3 PE OC 2GIG, DOES UNLOCK, I FLASHED THE CARD WITH SUPPLIED BIOS FROM MSI, R6950PEX.BIN IT UNLOCKS ALL, VOLTAGE CORE, OVERCLOCK, ETC. I DID NOT SEE ANY CHANGE HOWEVER IN THE SHADERS, MY GPU-Z IS THE UP TO DATE VERSION. SO NOT SURE IF THEY UNLOCK OR NOT. I ALSO PURPOSELY FLASHED A 6970 BIOS, ON THE CARD AS WELL // CRASHED IT. FLICKED THE **BIOS SWITCH** & BOOM IT BOOTS UP NO PROBLEM, IN WINDOWS, RUNNING, I SWITCHED IT BACK, & REFLASHED THE ORIGINAL BIOS OVER THE 6970 BIOS.....SO FAR EVERYTHING WORKS AWESOME // GREAT DESIGN HERE....THIS IS MY FIRST RADEON BASED CARD IN LIKE 15 YEARS // GONNA PLAY SOME MORE & I WILL REPOST WHEN I FIGURE OUT THE SHADERS.........MrStude2r5

MSI GTX 570 Twin Frozr III POWER Edition OC - Dual monitors IDLE higher temp

I have MSI GTX 570 Twin Frozr III POWER Edition OC, when I attached second monitor to this card temperature in IDLE mode on this card goes higher from ~38C with one monitor to around ~45-6C with second.
Card with attached two monitors do not goes in 2D mode, I readed its a nvidia bug and I should upgdate my BIOS.
In desktop IDLE mode card with attached one monitor
http://img401.imageshack.us/img401/3726/19936167.gif
In desktop IDLE mode card with attached two monitors
http://img851.imageshack.us/img851/1857/27227099.gif
My BIOS version 70.10.27.00.01
Is it available any newer bios for this card ?

Quote from: PeterMac on 10-May-12, 01:13:08
From 50MHz on GPU at idle desktop with single monitor to 770MHz!! with two monitors for what ?
to support the second monitor it seems.
read the link
http://nvidia.custhelp.com/app/answers/detail/a_id/2483

UEFI / GOP Request - MSI Geforce GTX 760 twin frozr gaming (OC edition)

Hi, see below for my card details.
Current Bios - 80.04.BF.00.30 (P2004-0010)
Serial number - 602-V284-260B1309018695
MSI GeForce GTX 760 TWIN FROZR OC Gaming Edition 2048MB GDDR5
Thanks in advance.

There you go: https://forum-en.msi.com/index.php?action=dlattach;topic=173335.0;attach=12043

MSI 6870 Twin Frozr II Temps

I currently purchased MSI 6870 Twin Frozr II and I'm about to overclock it. Although, I want to know the safe temp for this card.
-Thanks.

The Twin Frozr II is a very good cooler so you shouldn't have much problems with temps. The speed will adjust accordingly to keep it in safe limits. I'm not sure what the max safe temps are for your card but certainly don't let it go much over 90C.

MSI N560Ti Twin Frozr II OC Edition Temp to high

Similar Messages

Maybe you are looking for