MSI N580GTX TwinFrozrII OC latest Bios??

@svet
hi, can u guys help me to see if the vbios i have is up to date or should i update.
my gpu is currently a MSI N580GTX TwinFrozrII OC
S/N: 602-V255-060B1104074753
VBIOS:http://www.mediafire.com/download.php?zps7byb33bkrikn
thanks...

Hi zunaid, check this out : >>Disable GeForce GTX 580 Power Throttling using GPU-Z<<, but  I never do that because mycard already has OCP unlocker ^_^
I also never run Furmark again as it draws too much power and can damage your card.
Btw I think there is no new BIOS for GTX580.

Similar Messages

  • MSI GT60 2OC unlocked latest bios

    Hi Svet please unlock/unhide all hidden options in bios version E16F4IMS.50Y non RAID SKU for my MSI GT60 2OC. Thx!
    Donation sent !
    Confirmation number: 5YG65632P8646554D.

    received it, will work on and send back to you when its done after 3-4 hours
    EDIT: It's now done, check PM

  • MSI X58 PLATINUM, the latest bios and how to enable turbo boost

    1) Wich motherboard is ? MSI X58 PLATINUM or MSI X58 PLATINUM SLI ?
    2) What is the lastest version Bios and where can i get ?
    3) How to enable turbo boost in this motherboard ?
    4) Thanks so much guys. 

    My bad. The obvious lack of your self research got the better of me. I do not take helping, if I can, lightly. This is new technology, & a lot of expertise is in short supply. I downloaded the manual on this board & read the bios section, & in CMOS Setup, you should find an "Enable" setting for Turbo Boost. If you don't, please contact MSI Tech Staff @ http://ocss.msi.com.tw Also, (in your manual), is a reference under "Intel Turbo Boost Tech", which clearly states "for further information please refer to Intel's official website". By your original post, CPU-Z says it's an SLI? What did you buy? Does it say on the retail box? At MSI's website, the X58 Platinum (not the SLI), has version 1.0 bios offered in three global region zip files. M7522v1.0 Euro.zip, M7522v1.0 ASIA.zip, & E7522v1.0.zip. J.T.N. is correct, the SLI board takes something else. Are both boards bios's compatable? I have no idea. Recommend step one as to confirm with MSI what board you truly have & go from there. 

  • MSI X58 Eclipse 7520 - Latest BIOS & CPU support List?

    Hi...
    http://www.msi.com/product/mb/Eclipse-SLI.html#?div=CPUSupport
    http://www.msi.com/product/mb/Eclipse-SLI.html#/?div=Download
    does Bios v1F support newer Xeon w3690, 990x, 995x ?
    CPU support page is outdated..
    .txt does not say.

    Quote
    does Bios v1F support newer Xeon w3690, 990x, 995x ?
    Recommend to open a ticket with MSI Tech Support & ask them.

  • Latest BIOS for MSi GTX980 Gaming 4G

    Hi
    as some others have done and to try and solve the no display ports working issue.
    this is the bios reported via GPUZ = 84.04.28.00.F6
    uploaded here https://mega.co.nz/#!JBZznaDa!aRhWJ-CQqwvsrDTYieLWcmg-5gjiNVFusMeBQ95H6FY
    could you please advise if its the latest and supply a link to the latest BIOS and instruction on how to install, thanks.

    Hi Svet,
    As advised by MSI live update I've upgraded from 143 to 113 bios.
    Seems to have solved the problem of not having a signal to my 4K monitor through DP on boot.
    Also no problems so far...
    I've read several posts about this being the wrong bios for my serial #.
    My serial is 602-V317-15SB.....
    Can you please confirm that I have the correct bios?
    Thanks!

  • REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

    Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance! 

    Quote from: Nichrome on 07-May-15, 04:01:10
    Hi
    Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
    Thanks!   S/N: 602-V316-09SB1410116XXX

  • REQUEST: Latest BIOS for MSI GTX 970 Gaming 4G card

    Hello,
    I would like to update my Two 970's with latest BIOS.
    First Card SN : 602-V316-010B1412067742
    Second Card SN : 602-V316-24SB1501003122
    Regards,
    FG

    Quote from: floriangys on 08-May-15, 17:03:09
    Second Card SN : 602-V316-24SB1501003122
    This card already uses latest vbios (NV316MH.186)
    Quote from: floriangys on 08-May-15, 17:03:09
    First Card SN : 602-V316-010B1412067742
    This card uses an older vbios (NV316MH.184) and can be updated. Use the following: https://forum-en.msi.com/index.php?topic=184740.msg1456331#msg1456331

  • Latest bios for MSI R9 280x

    Can you tell me the latest bios for msi r9 280x ? the attachment hows my current bios.

    Quote from: moblawski on Yesterday at 15:54:05I&#39;ve had this issue before, but not on  a MSI laptop.
    The solution or problem was, that the memory timings set by the controller, was to low compared to manufactures.
    Now ...

  • I have to report you about bugs in latest BIOS for MSI-6545 ver.1 (ver

    I have to report you about bugs in latest BIOS for MSI-6545 ver.1 (version BIOS 1.7).
    After flashig BIOS I cannot change parameters "Shutdown temperatures", "Spread spectrum" and some others !!!
    When I try to do it, my computer hangs.
    I have CPU PIV-2.4-400-512 with memory 512MB Samsung original PC-800 ECC
    (By the way,there was no problems with BIOS 1.5 and CPU Intel PIV-1.6)
    [email protected]

    I have also noticed that the bios write protect control is missing.
    I don't know the reason why it's been removed but if you want to protect your bios you can set the jumper (J16) on your motherboard.
    If the jumper (J16) is shorted (Little plastic thing conecting both pins together) then the bios flash is locked and can't be updated.
    If the jumper (J16) is not shorted (Little plastic thing removed) then the bios flash is unlocked.
    Also can anyone tell me if two gameports are listed in the Device Manager after clearing cmos using bios 1.7.
    Bios 1.5 is ok apart from the fact that i can't upgrade my processor to 2.6GHz as it only supports up to 2.2GHz so if i upgrade processor i won't be able to clear cmos because of the problem with the gameports.
    I have tried everything to get rid of one of the gameports but nothing seems to work apart from going back to bios 1.5 which is no good because i wan't to upgrade my processor.

  • MSI R9 280X - Latest Bios

    I would like the latest BIOS for my MSI R9 280X.  The serial number on the card is 602-V277-28SB1311051155.
    Thanks...

    Use >>this<<

  • *Solved* MSI P43 Neo-F DPC Latency Issue - Latest BIOS Fix

    Hi, I'd like to avail of the latest BIOS fix for the DPC latency problem on my MSI P43 Neo-F (MS-7519) 1.0.
    I'm currently using BIOS 1.9, I haven't flashed to 1.A yet. Does 1.A include a fix or is there another BIOS that's as up-to-date as 1.9 or 1.A that would have the fix, with any links to download? I'm thinking along the lines of the A7519ICI.1xx series, whatever is the latest.
    Thanks in advance.
    EDIT: I have contacted MSI at http://ocss.msi.com.tw/
    I don't suppose there is any links to the latest A7519ICI.1xx BIOS that I can avail of outside of the private MSI FTP server?

    Thanks all for the advice.
    OK, so here's the story. I couldn't relax with those voltages showing up as they were, so I flashed my BIOS to A7519IMS.1A0 (1.A), which is the latest public release for the P43 Neo-F. I was previously on A7519IMS.190 (1.9) before today.
    When I flashed to A7519ICI.104, I noticed the version number was actually 1.10B4 (which I'm guessing can actually be expressed as 1.AB4 - a beta version for the latest public release, 1.A). The flash to A7519ICI.104 solved the DPC Latency issue, as when I used A7519IMS.190 (1.9) it was spiking.
    There is a happy ending. The flash to A7519IMS.1A0 (1.A) has also shown no spikes in the DPC Latency test. It seems the fix must be present in the latest public release BIOS for the P43 Neo-F after-all!
    This screen-shot was taken just a moment ago, proof that the issue has been resolved without a modified BIOS:
    Hope this helps anyone else out who is using the same motherboard and experiencing the same issues. Just get the latest public BIOS. No hassle!
    http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1484
    Please make sure that your motherboard is in-fact the MSI P43 Neo-F (MS-7519) before you flash the BIOS with any of the ones contained within the link above

  • MSI R9 280X - Latest Bios Request

    Dear Moderator
    I would like the latest BIOS for my MSI R9 280X Gaming BF4 LTD
    The serial number on the card is 602-V277-28SB1312058975
    MSI Live update reports
    Graphic card BIOS version:   TV277MH.330
    BIOS Date:        2013/10/28
    Thanks in advance

     

  • MSI N580GTX Twin Frozr II Overclocked Bios

    Quote
    core voltage 1012
    coreclock     822
    shader        1645
    memory      2138
    Everyone knows that settings which specified below is unstable..   what a shame that is default settings which produced by msi
    I need new bios of overclocked version;and also I don't want to descrease coreclocks.. if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    MSI N580GTX Twin Frozr II
    S/N:602-V255-01SB1101009487

    Quote from: SLaYeR KiNG on 27-February-11, 00:30:57
    Everyone knows that settings which specified below is unstable..   what a shame that is default settings which produced by msi
    I need new bios of overclocked version;and also I don't want to descrease coreclocks.. if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    MSI N580GTX Twin Frozr II
    S/N:602-V255-01SB1101009487
    Flash to this BIOS ==> https://forum-en.msi.com/index.php?topic=146139.msg1087535#msg1087535
    Retest
    Quote
    I need new bios of overclocked version;and also I don't want to descrease coreclocks.. if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    Quote
    I need new bios of overclocked version;and also I don't want to descrease coreclocks..
    You have to..,
    800MHz, 4096MHz are the right clocks for your card and not 822...4276
    ==> http://eu.msi.com/product/vga/N580GTX-Twin-Frozr-II-OC.html
    Quote
    if I want to default version of gtx580 I would purchased standart version.. but I was'nt.. So i purchased oc version and i want to experienced it as overclocked
    It will be still OC-ed, stock/reference clocks are 772MHz,4008MHz,
    while you will have 800MHz, 4096MHz as OC version

  • Help - How to Update Bios on MSI N580GTX SLI

    I have searched and all I ever see are instructions about updating the BIOS on the Mobo.
    I have two MSI N580GTX that I "think" I need to update the Bios. For some reason LiveUpdate 5 doesnt do a thing when updating in Windows.
    System Specs:
    W764 Ultimate
    AMD Phenom II X4 970
    MSI NF980-G65 (MS-7612) v1.4
    MSI N580GTX (SLI) Bios Version 70.10.17.00.01
    What are the steps ? For Video Cards ?

    To your edited and add-ed info:
    Quote from: DigitalFruit on 28-March-11, 06:05:31
    The Cards are N580GTX Twin Frozr II/OC that came with 822 MHz Core
    Quote
    However though it rolled back the clock ? Why was this when out of box it was 822 ?
    Because of outdated VBIOS of the card{s}.
    800, 4096 are correct one for your cards:
    http://www.msi.com/product/vga/N580GTX-Twin-Frozr-II-OC.html

  • MSI GE60-2OD Latest Bios

    Hi All!
    I'm looking to see if anyone has encoutered this issue before.
    My current Bios is E16GCIMS.611
    I am trying to update to the latest Bios found here GE60-2OD.html which I hope will solve an issue I'm having.
    Whenever I try to update to the E16GCIMS.617 I get an error Security_violation Invalid Rom image.
    I've attempted multiple times both through bootable forum flasher tool usb and through UFI update option.
    Anyone got any ideas?
    Help MUCH appreciated

    Completely certain, that was my first thought too.
    So to eliminate it I have downloaded it using different computers usb keys and internet connections (mobile data, work and home)
    Same result each time.
    Interestingly I am pondering another chain of thought which is that my laptop may not be the GE60-2OD as I looked at my puirchase receipt and found It listed as 2OE however the current BIOS identifies itself as 2OD
    I don't know maybe I'm just plucking straws! 

Maybe you are looking for

  • Can't drag clips into timeline (newbie warning)

    I'm sure that this has been discussed previously on this board, but I couldn't find a post. Back to my problem: All of a sudden, the current project that I'm working on will not let me drag clips into the timeline. The clips turn to a "lite" color of

  • I want to remove the border in iFrame when opendocument is used

    Hello Recently, I customized the EIS system by using JSP langiuge but, I had problem with the border in 'iFrame' Tag when opendocument url was used. I executed the opendocument url in iFrame Tag. but iframe's border appeared. I wanted to remove the b

  • Creating dup app in different schema...

    I have found a few notes on exporting/importing applications, but they don't tell me whether the export is a copy or move. I need to keep both schema's versions of the same application. My original version is under my personal schema. I am ready for

  • Grant Apps Privileges to custom User

    Hi, gurus, after successfully upgrading ebs 11.5.10.2 database to 10.2.0.5, we want to create a database user that will have all APPS Schema privileges. Please can anyone help us with all the Privileges,Roles etc that have to be granted to this User.

  • Logical vs Physical Deletes design

    While designing an application, what is generally recommended - use physical deletes from the database, or use a "isDeleted" flag to do a logical delete ? Can someone comment on that ?