MSI N660 TI problem

 Hi - new member here - 
 Here are my system specs:
  -- MB -- Asus Maximus V Extreme Z77 1155
  -- VGA-- MSI N660 TI PE 2GD5/OC GTX660TI
  -- CPU-- Intel Core I7 3770K 3.5G 8M R
  --CPU cooler -- Cooler Master Hyper 212 plus
  -- MEM-- 8G ( 4Gx2 matched set) G.Skill F3-12800CL9D-8GBXL
  --HDD-- (2) 1T Seagate Barracudas
  --PSU-- Seasonic M12II 620 Bronze   
  -- Case--Antec nine hundred two V3
  -- OS-- MS Windows 7 home premium
  All components are new , and nothing is overclocked .. everything has stock settings.
 Here is my problem:
 The system boots up fine, but after I log into windows about 3 seconds pass then the screen goes black . I try again and the same thing happens. .. but on the third or fourth attempt windows stays on and everything seems to work fine untill the next time . At that point I need to do the re-starting process all over again.
 When it is working and I am gaming my GPU temps run about 50-60 degrees C ( according to afterburner) , and my FPS hit between 130-140.
I have tried another PSU ( PC Power & Cooling Silencer 750W ) with the same results.
My board bios is updated to the latest version as are the drivers for the MSI.
 I don't have another board to try this on , But I tried another vid card ( Asus 8400GS) and everything worked fine ( no black screen) albeit much slower.
 Is there anything I'm overlooking , or anything I could try ? .. or is this a RMI ?
 Ty for any help! 
 Bugmon

I think I've found the problem , and it is not the card. After the same black screen started occuring with the other card I swapped monitors and haven't had any black screens since. The offending monitor was my older 27" HANNSG. 

Similar Messages

  • MSI N660 TF 2GD5/OC with MB MSI 990FXA-GD80 uncooperative / no signal

    Hi,
    I have a problem, my GPU MSI N660 TF 2GD5/OC uncooperatives with MB MSI 990FXA-GD80. No signal => black screen....I tried it on several PCIE slots on MB...
    New configuration:
    PSU: Fortron FSP700-80BPN (85+) 700W
    CPU: AMD FX 6200 six core 3,8Ghz black edition
    RAM: Kingston KHX1600 LC9 DDR3 2 x 4GB
    My old GPU NX7300GT works on the new mainboard ( 990FXA...) correctly
    On my old mainboard MSI K9N Ultra working with new GPU ( N660...) correctly ( PSU unknown 350W)
    Bios version on new MB (990FXA...) is latest 11.12 ( MSI/support)
    Bios version on new GPU is 80.06.10.00.15
    S/N: 602-V287-04SB1208197622
    rapidshare.com/files/719994549/GK106.rom
    Thank you for helping me

    Thank you guys  , it works correctly! 

  • UEFI Bios MSI N660 TF 2GD5/OC

    Is there a EUFI Bios available for MSI N660 TF 2GD5/OC
    Current bios: h ttps://docs.google.com/file/d/0BxPkfCyP9G6eenVlU2sxbUhGMUk/edit?usp=sharing
    S/N: 602-V287-050B1304097809
    Thnx

    Quote from: Svet on 16-June-13, 22:54:44
    here it is
    Is that the lastest UEFI firmware for N660 TF 2GD5/OC card?
    Thanks,
    Peter

  • MSI N660 TF 2GD5/OC BIOS update

    I have MSI N660 TF 2GD5/OC, s/n 602-V287-050B1302029937.
    Current BIOS version is 80.06.28.00.39 (from Afterburner)
    How to update BIOS ?
    Thanks in advance.

    Quote from: perica.budic on 27-May-15, 21:37:53
    Current BIOS version is 80.06.28.00.39 (from Afterburner)
    That is useless and not a real vbios version. Provide the actual vbios saved to file or the Nvflash version information text file (Syntax: nvflash /v >rep.txt [ENTER] ).

  • [REQUEST UEFI GOP vBIOS] MSI N660 TF 2GD5/OC

    Dear Svet,
    Is there a ROM for my video card?
    Model: MSI N660 TF 2GD5/OC
    SN: 602-V287-050B1302029749
    NVFLASH report below
    NVIDIA Firmware Update Utility (Version 5.118)
    Adapter: GK1xx                (10DE,11C0,1462,2871) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    Image Size            : 98816 bytes
    Version               : 80.06.28.00.39
    ~CRC32                : F75220C8
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300000
    Product Revision      : Chip Rev   
    Device Name(s)        : GK1xx
    Board ID              : E307
    PCI ID                : 10DE-11C0
    Subsystem ID          : 1462-2871
    Hierarchy ID          : Normal Board
    Chip SKU              : 400-0
    Project               : 2030-0000
    CDP                   : N/A
    Build Date            : 09/17/12
    Modification Date     : 11/01/12
    Sign-On Message       : GK106 P2030 SKU 0 VGA BIOS
    MSINV287MS.204

    Use >>this<<
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • UEFI/GOP Vbios Request msi N660 TF 2GD5/OC

    Looking for the latest bios for the MSI N660 TF 2GD5/OC
    SN: 602-V287-04SB1208179991
    current bioshttp://dl.free.fr/n75Qpq508
    Thanks for help

    great thank you

  • [REQUEST] vBIOS for MSI N660 TF 2GD5/OC

    nvflash doesn't like the backup of my original vBIOS for some reason.
    Can I get a copy of either the original or latest vBIOS for the following please?
    MSI N660 TF 2GD5/OC
    S/N is 602-V287-190B1312000547
    Thanks!

    Use >>this<<
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • Request MSI N660 Hawk GOP UEFI bios

    Hi,
    I would like to request a UEFI GOP BIOS file for my MSI N660 Hawk with the serial number: 602-V288-030C1304036759 .
    Would be very nice and thanks a lot for the help.

    use this one:
    https://forum-en.msi.com/index.php?topic=179955.msg1304882#msg1304882

  • [REQUEST UEFI / GOP vBios] MSI N660 Gaming 2GD5/OC

    Hi,
    Is there a GOP/UEFI vbios for this GTX 660?
    Model number: N660 Gaming 2GD5/OC
    S/N: 602-V287-35SB1311067426
    Current firmare/vbios: **http://dl.dropboxusercontent.com/u/16694819/GK106.rom**
    Thanks,

    Hello,
    I have the same graphic card model (MSI N660 Gaming 2GD5/OC ), can I use the same Vbios you posted here for mine?
    NVIDIA Firmware Update Utility (Version 5.142)
    Adapter: GeForce GTX 660      (10DE,11C0,1462,2877) H:--:NRM B:01,PCI,D:00,F:00
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    IFR Data Size         : 1208 bytes
    IFR CRC32             : C6992BD3
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : C18A500E
    IFR Subsystem ID      : 1462-2877
    Image Size            : 98816 bytes
    Version               : 80.06.58.00.55
    ~CRC32                : 1A099683
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300000
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 660
    Board ID              : E307
    PCI ID                : 10DE-11C0
    Subsystem ID          : 1462-2877
    Hierarchy ID          : Normal Board
    Chip SKU              : 400-0
    Project               : 2030-0000
    CDP                   : N/A
    Build Date            : 02/27/13
    Modification Date     : 09/25/13
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK106 P2030 SKU 0 VGA BIOS
    MSINV287MS.2H3
    My S/N : 602-V287-35SC1311018881
    Thanks =)

  • UEFI GOP BIOS - MSI N660 Gaming 2GD5/OC

    Hello Guys,
    Is there any chance for a UEFI GOP bios for:
    MSI N660 Gaming 2GD5/OC)
    SN: 602 - V287 - 35SB1311066671
    BIOS: https://dl.dropboxusercontent.com/u/12123803/GK106.rom
    Thank you,

    Quote from: flobelix on 13-March-14, 02:08:59
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • UEFI GOP for MSI N660 Hawk 2G

    UEFI GOP for MSI N660 Hawk 2G
    Hi!
    I would like to know if there is an update for my N660 Hawk 2G, which would enable EUFI GOP (and Windows 8 Fast Boot!).
    S/N is : 602-V288-02SC1211045382
    Bios Version is currently 80.06.10.00.84(P2030-0000) according to GPU-Z...
    Thanks a lot!

    Quote from: Svet on 01-May-13, 22:35:36
    no other way, you need to contact msi support to ask for this.
    i can't located such vbios for your card.
    MSI china said no uefi BIOS

  • UEFI GOP for MSI N660 Hawk

    I would like a GOP/UEFI BIOS for my MSI  N660 hawk
    My vbios info from nvflash.exe /v is:
    =====================================================
    NVIDIA Firmware Update Utility (Version 5.142)
    Adapter: GeForce GTX 660      (10DE,11C0,1462,2880) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    IFR Data Size         : 1120 bytes
    IFR CRC32             : 66072526
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : 5D82AAA5
    IFR Subsystem ID      : 1462-2880
    Image Size            : 98816 bytes
    Version               : 80.06.28.00.63
    ~CRC32                : 14427818
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300000
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 660
    Board ID              : E307
    PCI ID                : 10DE-11C0
    Subsystem ID          : 1462-2880
    Hierarchy ID          : Normal Board
    Chip SKU              : 400-0
    Project               : 2030-0000
    CDP                   : N/A
    Build Date            : 09/17/12
    Modification Date     : 12/04/12
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK106 P2030 SKU 0 VGA BIOS
    MSINV288MS.140
    =====================================================
    Thanks you very much !

    Quote from: flobelix on 24-June-14, 18:53:48
    Add S/N -> https://forum-en.msi.com/index.php?topic=167763.0
    Hello, my S/N is 602-V288-030C1306001633-96L
    Thanks a lot.

  • Msi ti 4200 problems

    i installed a msi 4200 agp video card today and have had nothing but problems. on the first boot xp did not try to install new hardware. In the display properties it did not recognize the video adapter. i tried to intsall the drivers from the installation cd but it said it was not the right files and did not recognize the path. on the second reboot no picture after windows boots. i have a gigabyte mb ga-7vrxp and am upgrading from a pci video card. any help would be much appreciated.

    Thatz Y... I won't switched to XP until it has really settle down...
    lambethduke, I know where you've got things wrong and its a common mistake as I have accidentally did it myself before ... You must have direct right click on your Display adapter driver and un-install... This will cause the screen to go blank during startup whenever you wanna install the drivers again, though you may be able to see part of the windows starting up... Next time, juz un-install the driver by double clicking on the driver and inside the profile click on un-install and this problem will never exist to you anymore...
    All the Best... :D!!!

  • MSI G4Ti-4200 problem

    Hey all, hope you can help me out.
    Having some major problems with installing the Ti4200 64 card on my system. My system continually crashes with it and no games or programs run for very long, freezing or just not loading, due to lack of virtual memory.
    I've downloaded the latest patch for my motherboard and graphics card so its not that.  Might be the psu as its only 300w so I'm looking into upgrading that. Could there be a prob with the motherboard, memory or psu.  I can't afford to upgrade all of them so is there a way of finding out which one it could be.
    System:
    Win 98
    Athlon Thunderbird 1.1
    FIC AZ11 motherboard
    765 crucial sdram pc133 (1 x 256 and 1 x 512)
    Maxtor Plus8 IDE 40 gig Hard Drive
    MSI G4 Ti4200 td-64
    Creative SB Live!
    Liteon dvd
    300w psu

    hi again,
    here are the specs for my psu.
    +3.3v - 15A
    +5v - 35A
    +12v - 10A
    -5v - 0.5A
    -12v - 0.5A
    I've since flashed my motherboard with the latest bios, probably not the wisest thing to do in hindsight as now nothing happens at all with the msi agp card so i'm running off my pci voodoo 3 2000 now. As far as the cmos is concerned, its got all the same settings as before and now i'm totally confused. I'm guessing a new psu is the order of the day.

  • MSI X48C Platinum problem

    i have a MSI X48C Platinum
    Ram: OCZ PC3-12800 Gold RAM - 4GB, 2x2GB, 1600MHz, DDR3, Low Voltage, Dual Channel
    Processor: Intel Pentium D 915 2.80GHz / 4MB Cache / 800MHz FSB / Dual-Core /
    PSU: thermaltake 420w
    Problem: i turn the computer on it sounds like its going to start up then turns off for 5 seconds then comes back on and dose the same thing over and over. if i hit the button on the back of the motherboard it will boot and say CMOS Settings Wrong, CMOS Date/Time Not Set, Press F1 to Run Setup Press F2 to load default values and continue if i click f1 it will go in to bios and if i click f2 it will load windows.
    any help??

    Quote
    sorry i dont know what you mean when you say amperage limits (A) on the +12V voltage rails
    Look on the PSU sticker.  And write down the numbers.
    Quote
    ok i got it to boot but it dose the same thing
    Did you do this?
    Quote
    Manually set the memory clock speed to DDR3-1066 for testing and see what happens.

Maybe you are looking for

  • 3-d surface graphs in Linux LV 8.6

    I need to draw a surface graph from data where the z axis can take one of 14 values and the (x,y) coordinates range from 0 to 1, with no fixed intervals.  In essence, I have 14 horizontal slices of a surface, with 50 random surface observations on ev

  • Driver power state failure (Windows 8.1 pro) when downloading a program and restart.

    Hey Guys, I've been trying to fix this problem for a while now, without any solution. I have a HP ENVY 15-j035eo Notebook PC (ENERGY STAR) which I install Windows 8.1 pro on. I start by getting all the drivers that are missing in Device Manager and u

  • Function in component in tilelist in flex

    i am taking 4 hardcoded images from an xml file in flex tilelist component and i just want to drag and drop one image from tilelist to another but i am unable to call mousemove function in component of tilelist

  • TIMER in FORMS 6i in order to show the contents of v$ view....

    Hi, I am looking for a solution that would continously show the contents of v$SQLArea on forms 6i. Should I use timer in forms 6i in order to get the desired results. COULD someone please send me the little example of my query? how should I do that?

  • Site background

    I just loanched a site through godaddy after desigining it in Muse and testing it thourgh Business Catalyst. The background of the home page disappeared after I loaded it. All the other pages have the background. Any suggestions as to how to fix this