MSI N670GTX not detected....

Hi, this time I'm requesting a little help with the graphics card... Windows does not recognize it!
Device manager only showed once Unknown Device under Device Manager
NVIDIA Drivers install: Installer cannot continue
My MB is Z68A-GD65 G3 (with an I7 so only BIOS 23.7)
MB S/N is : 601-7681-240B1108243167
Graphics card: 912-V284-002 N670GTX-PM2D2GD5/OC S/N:602-V284-20SB1211147602
Thanks in advance

flash your mobo BIOS to .N88 https://forum-en.msi.com/index.php?topic=163866.msg1181578#msg1181578
then retest,
Quote
Graphics card works ok in another cpu
what you mean by another CPU, you mean PC?
can you save and upload his current vbios when the card is detected there?

Similar Messages

MSI mobo not detecting HDD

Please help,
My newly installed MSI 6383 Socket 370 Mobo is not detecting HDD. Actually, it detects it but is not booting to WinXP. It hangs up while verifying VMI data pool?
Any Suggestions.
I had to replace mobo due to lightning strike which zapped psu and mobo, i think.
Thanks

Yes it was in zapped pc. We have an identical HP in another office so i I took this drive out and put it in identical one and it works fine. It is jumpered as the master and connected that way. Seems like it is a compatability problem between motherboard and HDD, but I don't know. Both the floppy and the cdrw work fine. Thanks for the help.

MSI GE70 Not detecting wireless?

MSI GE70 laptop Windows 8.1 64bit.
Whilst using the internet yesterday suddenly I disconnected. Now I can't detect any wireless connections. In the 'Turn wireless devices on or off' settings, under 'wireless devices', it says 'we couldn't find any wireless devices on this PC'. In 'Device manager' the only Network adapter showing is 'Killer e2200 Gigabit Ethernet Controller (NDIS 6.30). So currently am having to plug my laptop into my router. Any idea where my wifi capability has gone?
Sorry if this is the incorrect forum, but I've done numerous searches and can't find the solution anywhere on the internet.
Appreciate any help, thanks.

Quote from: Svet on 03-July-14, 00:08:23
Here is how to activate the WiFI:
1. Find the Settings icon on the desktop and click on it.
2. Enter the PC settings main page by clicking on Change PC settings.
3. Unfold the Airplane mode selections under Network.
4. Make sure Airplane mode is set to OFF here.
5. Turn the Wi-Fi or Bluetooth function on/ off by sliding the function switch bar.
When Airplane mode is set to ON, the Wi-Fi and
Bluetooth function will be disabled at once.
That's where I looked first, this is what I see;
Under 'connections' ; https://imageshack.com/i/n1ffuhj
Under 'airplane mode' ; https://imageshack.com/i/npgexaj

MSI x48c platinum - does not detect SATA HDDs

I am having some problems with a pc build with motherboard not detecting SATA HDDs (MIS x48c Platinum).
I believe I have exhausted all other avenues, and I would appreciate some help if I have missed something obvious.
(details of other components are listed at end of mail).
When I built pc using these components, and went into BIOS settings, the SATA HDD's were not detected. I tried changing BIOS settings, but no difference if SATA, AHCI, or IDE settings.
I removed the HDDs and successfully tested them in another machine (also formatted them while had them istalled in other pc).
IDE optial drives are detected. I have tried to boot with these disconnected to ensure no isues with both IDE and SATA drives connected, but this did not resolve issues.
I have also tried connecting HDD to different onboard SATA ports, and connecting just one drive with no success.
Resetting BIOS defaults, and using clear CMOS reset did not resolve issues either.
Sometimes on boot, it takes a few attempts to boot correctly, and on these occassions I receive an error message "Warning !!! The previous performance of overclocking is failed, and the system is restored to the default settings, Press any key except "DEL" to enter setup ......." I haven't tried to set any over clocking.
I read about a number of issues on MSI forum related to SATA drives which were resolved by BIOS upgrade (mobo was shipped with v.7.0 released 20 March 08). I managed to install an old IDE HDD and flash BIOS, but still no resolution of issues detecting SATA drives (BIOS V.7.2 released 29 July 08).
I've tried everything I can think of at this stage. Is there anything else I should try, or is there something wrong with this motherboard?
Spec:
Motherboard:
343949 MSI X48C Platinum, X48, Socket-775,
DDR2/DDR3, ATX, GbLAN, 2xPCI-Ex(2.0)x1
Other components in build:
CPU Intel Core 2 Quad Q9550
Graphics Sapphire Radeon HD 4870 512MB
HDD 2 x Samsung SpinPoint T166 500GB
RAM 4GB (2x2GB) GeIL DDR3 1333MHz Value Dual Channel (7-7-7-24) PC3-10660
PSU 700W X-Power ATX SLI PSU
ODD DVD & CDR drives from an old pc - IDE connections.

i just remember i had once similar problem with a sata driver. the issue is this you can not adjust everything in bios in one go and expect mobo to know about it. what i mean is this for instance you disable the raid then you save it and exit and then when it reboot you go back to bios and reset another another parameter, you save and exit and on reboot you go back to bios and reset another parameter. i got round the prob that way and it worked and mobo saw the sata HDD. give this a shoot good luck and finally make sure raid is disabled
this is what i would do
1- make sure the jumper setting on your IDE Hdd is correct (Y may have to try this twice as there are two different setting on jumper setting for Master)
2- connect the sata HDD
3-click on power
4-go to bios and disable raid save exit
5-on reboot go back to bios
6--on first option click on it then you should see all devices that can be seen by mobo if you do not see sata HDD you have to click on enable for the auto to see the device once it sees the device save and exit. REMEMBER THE JUMPER SETTING ON IDE HDD CAN CAUSE PROB . SO try the other jumper setting for master, repeat this procedure once more hopefully you get it right

MSI B85M-G43 could not detect Gigabyte R929OC 4GB 3X Windforce

I recently build a new PC a month ago and have been using it for 3 weeks then random black screens problem started to occur.
It started right around the time after I updated to catalyst 14.4 w/o the beta. At the same time i noticed windows update has updated some files which i did not note down what it was. Also Noticed that startup list had some new programs running.
I proceeded to disable the programs in startup, undo the latest windows update and finally reinstalled windows 8.1
Nothin works and I am left with black screen, which i realised that to be actually the mobo not detecting the card once i got a vga screen plugged in to mobo onboard graphics and went to BIOs to see.
Previously my BIOs were updated to latest through the liveupdate 5 program, which itself updated to liveupdate 6. For some reason I dont like programmes sitting at the back constantly checking for updates, so after updating those, I deleted all those programs. The updates also took forever to download, I figured i will download/install individually in future. Now that I do a search there is no live update 6?
Just to make sure, I have reflashed the BIOs to E7823IMS v3.6 again through the m-flash inside BIOs, but did not choose the BIOs + ME option as i dont know what it is. After reboot, BIOs version remained there, checked for ME and there's the version number 9.0.21.1462.
BIOs version: E7823IMS v3.6
ME version: 9.0.21.1462
Prior to the Win8.1 reinstall, my OS was sitting on my SSD in non UEFI mode, I chose to install in non-uefi as i dont know what it was then. When i tried to reinstall, somehow the boot priority identified the SSD as UEFI first, so i wanted to give it a try and proceeded to install win8.1 in UEFI until reboot failed. Then I decided to installed my win8.1 on my HD in non UEFI instead. The system, as usual, works using the integrated graphics and mobo could not detect the graphics card in the only PCIe 3.0 x16 slot. Should I plug it into the PCIe 2.0 x16 slot and try, It never occur to me until now as I thought that was the only slot my graphics card could use.
Please help
Here are my specs:
MSI B85M-G43
Intel i7-4770 3.4GHz
G.Skill Ripjaw 1600MHz (2 x 8)MB Blue
SSD Samsung Evolution 240GB
WD 1TB Blue
Gigabyte R929OC 4GB 3X Windforce
LG 24x DVD Writer
Corsair Carbide Air 540 Case
SeaSonic G-750 80+ GOLD Power Supply
ASUS PCE-N53 PCI-E Adapter
Windows 8.1 OEM
Qnix QX2710 Evolution II 27" matte PLS monitor (uses dual-DVI-D connector only)

try to update your bios again but use the BIOS + ME option as it will flash not only your bios but Intel ME at the same time.
Note: Don't remove your USB during bios flash as the system will restart for I think around 2 times and plugging out USB might kill the MB bios.
Did you modify any settings in the bios setup??
If updating bios not can't work, try to plug your card to second PCIE slot and see if it could boot or not.

MSI H55M-E32 will not detect Graphics card

HI,
I just bought a new cpu, i am using the intel intergrated graphics (on-board) at the moment. I tried installing radeon 9600 pro graphics card but the mobo does not detect it. Monitor is black screen, no boot up. btw the fan on radeon 9600pro is not spinning.
I tried using another graphics card that i have. A creative gf4 Ti4200. no boot up on monitor as well. fan not spinning.
How to get the motherboard to detect the graphics card...??? my computer does not detect any graphic cards..
I like to get radeon 9600pro working ...How to do it?
My comp:
Motherboard - MSI H55M-E32
cpu - Intel i3 540
mem - kingston 2gb ddr3 pc1333
psu - Vios 450w psu
os - win xp sp3
vid - Ati radeon 9600pro , creative gf4 Ti4200
Thanks.

and the other one is an ancient agpx 4 card as well
YOU DO NOT HAVE AN AGP SLOT TO PUT THEM IN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

SSD not detected in MSI bios?

So i have a corsair force lx SSD and it seems to be not detected on the bios. This SSD does have an OS in it and my pc does boot. but sometimes when i turn on my pc it gives the "9C" error i believe. after i did some research hat code means that it is searching for a bootable USB or something similar. So itry to move the SSD to first boot priority but the SSD is not even an option. It is detected, the mobo sees it in board explorer and all but it is not seen on the "boot priority"
I do have an HDD, Optical Drive and the SSD plugged in. But the SSD is in sata port 6. does plugging it farther down the sata port effect its "detectedness"? Should i move it down to sata port 1 or sata port 2?
Sorry if my grammar/sentence structure and all seems messed up. I am in a bit of hurry while typing this thread.
PC Specs:
CPU: fx8350 stock speed
GPU: XFX r9 280x stock speed
MOBO: MSI 970 Gaming
HDD: 1TB Seagate
SSD: Corsair 128GB LX
DVD player

Quote from: Nichrome on 14-September-14, 01:20:34
Which SATA port is the SSD plugged into? Make sure it is into #1 on the motherboard so it's detected as #1. Otherwise some play within BIoS is required to get it up.
The SSD is plugged into sata port 6.
My HDD is plugged into sata port 1
Optical drive is plugged into sata port 2
I will swap my SSD and HDD port and see if it will show up on the boot priority

MSI H55M-E33 SATA Not Detected

I've been putting together a new computer with this H55 board fresh out of the box. No matter what I do though all my SATA ports still show up as Not Detected in my BIOS for my hard drive or disk drive. I've tried all kind of combinations with every port. I've even taken out the CMOS battery for a while.
Specs are:
MSI H55M-E33 motherboard
Intel Core i5-680 Clarkdale 3.6GHz 4MB L3 Cache
Western Digital 1.0 TB HDD Model WD1002FAEX-00Z3A0
Pioneer DVR-218LBK
Corsair 850HX Power Supply

Okay, so I cleared CMOS several times, and even tried a brand new hard drive and DVD drive with at least seven different sata cables and every sata slot I had. Still nothing showing up at all in CMOS.
Also, here's my Bios: A7587IMS V1.1 012210
I'm very new at putting computers together, but from my understanding Sata should pretty much be plug-and-play. Or at the very least plug-and-see.

MSI CR650, networkcontroller not detected

Hello,
I have a problem with the networkcontroller whitch is not detected by the laptop.
The laptop was bought with win8 x64. i installed win 7 x64 on it. Installed all the drivers given by the msi driver site, but
the network drivers are not working. Windows says that it has failed installing the drivers software, reasons are not given.
Its strange that the drivers given by the msi site are not working.
Can someone help me with this?
Thanks

Quote from: Xbeunhaasx on 20-February-14, 03:07:54
Problem solved. Found the driver on the dell website: http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=XR8FN
Very strange that msi is giving wrong drivers..
Thanks for your help
Interesting...I'll have to look into this a bit more....

MSI 845 Ultra: USB20 not detected in WinXP

Hello,
Recently I bought a computer based on a MSI 845 Ultra board (USB2.0 + RAID) I'm using WinXP Prof. als desktop O.S. Everytinh seems to work fine but the USB2.0 controller is not detected. Is there in the bios some thing that I should enable ? Do I need somekind of extra driver so that it can be discovered. The USB1.1 controllers are working fine; no problems! :P
Who can help me ?
Extra Info
MSI 845 Ultra (USB2.0 + RAID; MS6398
BIOS version 3.6
Windows XP Prof + SP1

Hi,
USB 2.0 is supported through external NEC chip.
This infos I found on MSI web.
NEC USB 2.0 Driver
Support model K7T266 Pro2-RU (MS-6380 Ver2.0), 845 Ultra-ARU (MS-6398)
Description
Add General ID: VEN_1033&DEV_00E0
-- Driver version: 2.0.3300.20300.
For K7T266 Pro2, this driver must be used together with BIOS Ver3.3 or after.
Note: For WinXP, please use Microsoft Windows Update to download driver from Microsoft or aquire the latest service pack
WinXP SP1 Download Website :
http://www.microsoft.com/windowsxp/pro/downloads/servicepacks/sp1/sp1lang.asp
Date 2003-4-28

MSI ENJOY 10 PLUS, Media USB not Detected in CPU (HELP)

winpad enjoy 10 plus I can not be touched, do not work, and the device is not detected on the computer (no media), so can not upgrade the firmware again, the power button (Android system recovery utility v1.3.38) not work, though already updated drivers, follow instructions, the result was like that, please provide a solution,

Try to use another cable to see if the problem comes from the cable.
Also, you can try to insert the straighten paperclip to the reset hole and plug the AC adapter to power on the tablet again.

New MSI 570Ti not working.

Hi guys.
I currently have an XFX 5770 Slim edition in my PC.
I uninstalled the ATI drivers through control panel (HOWEVER don't think they have uninstalled properly because with the GPU still in the PC, my resolution is still 1080p? Shouldn't it have gone too 800x600 or something? + Driver Manager still recognises it as a ATI Radeon 5770?
When I swap it out for the MSI 750Ti, it powers up, the fans spin, but I get 'No Signal' on my monitor.
A friend suggested I should install the drivers THEN plug in the GPU. Internet is suggesting it could be an old motherboard BIOS? (Gigabyte ga-z68a-d3-b3)
I'm baffled really. But I'm not convinced with how ATI uninstalled the drivers.
I seem to remember back in the day on an old PC when I uninstalled Nvidia drivers to install the 5770 in, I had to go through a period where the resolution was really small.
Any ideas guys?
Also my network adapter on the mobo seems to have stopped working. When changing out the GPUs I forgot to disconnect my PC from the electricity and it stopped it from turning on for 5-10 mins. However I disconnected it, waited and came back and it turned on (I'm thinking about the memory thing the motherboard does).
I've googled the network adapter issue and someone seems to have recommended that one just removes the PC from the electricity and wait a while then it will reset and the network adapter on the mobo will come back to life.
Fortunately I have a USB wifi adapter lying around which I am using to connect to the internet atm.
The reason I have mentioned the network adapter is so that you know what I've been through so far at least.
But yeah, any help would be appreciated.
Thanks!
UPDATE: Just an update. I tried leaving the PC unplugged to fix the network adapter but unfortunately still to no avail. It lights up when I put an ethernet cable in it however the PC itself just does not detect anything.
Also when I shut down the PC, it shuts down but power still seems to circulate since fans & lights stay on and I have to do a hard power off.
However my main problem at the moment really is getting the 750Ti to function. Anyone have any clue whatsoever?

Quote from: badboy2k on 06-October-14, 17:18:44
driver sweeper would do if you have that! the main thing is it probably still has all the regestery keys and some fragments from your HD5770 still floating around in your OS (Un-installs usually leave that kind of trash around in your OS unless you can clean them out using a program to make it like it wasn't ever there)!
let us know how it goes.
I think it definitely does.
Because this isn't the first time I change GPUs (I've done it for friends etc) and normally when I uninstall drivers, the resolution goes to 640x480 or 800x600. Whilst I am supposedly driverless in 1920x1080 at the moment which surely is proof there is some sort of fishy ATI remains left over...
First thing I'll do when I get home is try to clear the CMOS and hope that fixes the LAN & shut down issue.
Then I'll replace the 5770 again with the 570Ti and see if I can get a signal from my onboard graphics card.
If I do then I'll install the Nvidia drivers through the onboard graphics and hopefully it may mean we crack the issue!

DVD drive not detected (K9N2GM-FD)

For some reason my motherboard( K9N2GM-FD) is not detecting my DVD drive.
Here is the setup I'm using:
AMD Athlon 64 X2 5200 Brisbane 2.7GHz
Kingston 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
MSI K9N2GM-FD AM2+/AM2 NVIDIA GeForce 8200 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive
a lite on DVD drive(model DH-20A4P33C) I bought at walmart
Antec NeoPower 550 550W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply
The DVD drive is an IDE drive and it's getting power(I can open and close it).
I tried changing some things in the bios, trying a different drive, and trying a different IDE cable still can't get it to work.
every thing passes post test.
And the bios is version 1.2.
Any help would be greatly appreciated.

You did use proper standoff's to mount the board in the case?
yes
BTW, the controller is turned on I presume.
yes
If all is mounted correctly and there isn't any short, then I would RMA the board.
Ok I'll RMA it
Thanks for the help

Application not detected in Task Sequence

Hello,
I have problems with some applications in a task sequence with SCCM2012 R2.
The applications install fine in a normal deployment via Software Center and get detected after the Installation.
The same applications get installed in a TS but are not detected after the Installation (according to AppEnforce.log) and the TS fails.
I already tried all kinds of application detection methods (file system, registry, MSI, custom script) but without success.
When the TS fails I checked manually (pressing F8) where detection should have looked and the requirements are met.
Thanks in advance for your hints and solutions.

Hallo Salthaus_de
Tbh, it might work if you do as you just said, move it over to a package, and it might not Work. :)
The most typical reason that this happens is that your application install ends before it is done doing what it should. I have seen this happening alot with "Autodesk" products, they start a "setup.exe" which spawns another "setup.exe" and exits the first.
This then tells SCCM, the setup.exe's PID you requested to look at has ended, and you can now do your detection check.
This Means it will be installing for another 15 minutes, and taking up msiexec.exe - which Means the applications installing after this one possibly could end up not installing with the errorcode, another product is currently being installed.
Based on this i would still, eventhough the "workaround" Works, as it should, find out why this happens.
Just my 2 cents, what you do NeXT is up to you. :)
Kind regards
Morten Leth

MSI N670GTX not detected....

Similar Messages

Maybe you are looking for