MSI NEO2 - F and Athlon 3000 64 Venice

MSI send to me a new beta bios and now Dual ram working fine , but now i have another problem ..(beta bios 903)
CPU benchmarks are very low , my A643000 is slower then athlon xp 2800 :/ i tested it in sisoft sandra 2005 ..
Any idea for help me
ps.sorry for my english :/

Well I'm in work right now and dont remember all bios seting , but cool and queit maybe is enable a try in home that settings and disable this,
Cpu V was in 1.4 in core center,memmory have settings Ddr400 , cl2.5 , 3 7 3 and voltage is 2.65 (2 x 512 kingston 3200 ) but memmory benchmark results are very good ...(temp cpu is 37'C)
HT is 800mhz and voltage for this is auto.
and AGP Freguency ?? what is this ? j have setting " sync with cpu" on..
but some others is 66 and 77 ..

Similar Messages

Fastest overclock w MSI Neo2 Digital and AMD64 3000+ with OCZ 512 x 2 premier?

I was looking at a faster CPU and can't be bothered as they are costly and power hungry. I am looking at upgrading my platform with either of an Intel E8500 or the equivalent AMD cpu with an onboard video motherboard with HDMI...
but, for now, since I can't afford to upgrade at the moment, I was wondering if I could safely up my CPU to 2.4 GHZ or less. I have read people going to 2.4+ GHZ so I figure I could try going to 2.2, 2.3 or 2.4 GHZ. The CPU is literally worth next to nothing, so it's worth a try. Any thoughts? If there are risks in overclocking close to the limits, I'll back it off to 2.2 or 2.3 GHZ, but, I should still see SOME improvement.
My Motherboard is an MSI Neo2 Platinum.
thanks,

You should give the full name of your MB in signature, I assume it's a K8N Neo2 Platinum. Same thing for vid card, GTS without number doesn't say much (example of mine: 9600 GT). It's possible as you said to get it to 2.4 but some systems will OC better than others so you just have to go for it and see what you come up with. Keep an eye on CPU temp when attempting any OC.
Read what you can about OCing it and then if any more questions or have any problems post back here and we'll help the best we can.

MOVED: Fastest overclock w MSI Neo2 Digital and AMD64 3000+ with OCZ 512 x 2 premier?

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=123284.0

You should give the full name of your MB in signature, I assume it's a K8N Neo2 Platinum. Same thing for vid card, GTS without number doesn't say much (example of mine: 9600 GT). It's possible as you said to get it to 2.4 but some systems will OC better than others so you just have to go for it and see what you come up with. Keep an eye on CPU temp when attempting any OC.
Read what you can about OCing it and then if any more questions or have any problems post back here and we'll help the best we can.

MSI Neo2 FR and ATI 4870

does anybody have a similar setup? i seem to be having problems getting my system to boot with a ATI 4870 in, i have tried everything. i even purchased a new PSU but i'm still getting the same result, has anybody came across a problem like this before with this board?
i dont really see why it would be causing a problem as my current 8000GT runs fine on the board :(
much thx

hi thx for the reply
as far as the board goes its a MSI Neo2 FR this is the one http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1261
when i try to boot with the HD4870 in i get and error and going by the lights on the board it would be a problem with the graphics interface, green, red, red, red, i replace the card with my old 8800GT and the system boots fine. i know theres nothing wrong with the ATI 4870 card as its been sent back to the place i bought it from and tested and seems to be fine :/
edit: i also have the latest bois which is v1.10

MSI KT333 raid and athlon 700 (is it possible)?

i have bought and msi KT333 raid motherboard and i tried to put and athlon 700 in it but when it tries to boot up is says that the processor runs at 933 and after that it freezes i can not even go into the biios
what can it be

Hi!
You are probably trying to run it with an FSB of 133 MHz, 700 MHz Athlons are supposed to work with a 100 MHz FSB.
Hans

MSI K9N2G-Neo and Athlon X2 7850 Black Edition - BIOS Options Problem

Hello, i have this MSI K9N2G-Neo + Athlon X2 7850 BE (REVEEN RCCT 0901SP + Tuniq TX2) + 4 x 2048MB OCZ Platinum 1066MHz, 700 watt real power supply, etc...
The problem is the bios v1.2 and new v1.3 that appears Disabled the CPU Voltage option for this cpu, in gray color or default values and i can´t change it. Now the cpu is running well at 3.2 ghz OC (200x16) some stable but not at all, i think it is a weak OC for a Black Edition CPU. Before i was using the X2 7750 BE and was the same problem with the CPU Voltages Bios´s options too.
Why in the bios isn´t enabled the CPU Voltage option ?
And why this Athlon Kuma don´t appear in the CPU SUPPORT LIST ??
This mother says that support CPUs up to 140watts and AM3... is it sure or it is a lie ?
This bios v1.3 is a few days new, Now i have to wait another 5 moths for a new one ??
Thanks a lot.

Quote from: Svet on 05-July-09, 04:59:39
https://forum-en.msi.com/index.php?topic=128250.0
Where you saw that?
Hi Svet... i did what u said me with numpad and nothing happended cause the cpu option is disabled. I think there is some kind of incompatibility between this mother and Kumas Core CPU... whit the 7750BE was the some issue too.
MSI official web page and 140Watts mothers support shows it.
Slds

MSI Neo2 865PE and SCSI Controller Question

Hi All,
Im new here so be easy on me
Anyways im currently building a new system P4 System based on the new 800FSB, i have all the parts ready, ie. CPU, DDR400 RAM, Case, Adaptec SCSI Controller, HDD etc etc, but believe it or not i havent purchased a motherboard yet. The reason being i want to get clarification that my setup will actually work with the motherboard before i go out and buy it. WHAT SETUP you ask, please read on
Now the reason im posting here is because from what i can see on the internet this is a really top notch board (best performer in the recent THG test) so naturally its one of the boards im considering.
Now to the my QUESTION: I want to use my SCSI drive connected to the Adaptec as the OS drive and boot from it. However my main concern is that the Neo2 865PE wont let me boot of the SCSI Hard Disk attached to the Adaptec SCSI 21960 controller. Ive been told that certain motherboards eg. ASUS wont detect a SCSI controller on boot up because it will only detect the onboard RAID controller as the SCSI controller, therefore not letting you use the SCSI disk at the boot device.
Can anyone ease my mind and tell me the MSI 865 Neo2 will let me do what i intend??? ie. Boot of SCSI disk.
Any response/comments is appreciated
Cheers

Hi Domino,
Thanyou for testing the setup out for me.....
When you tested it did you have your onboard Intel S-ATA RAID controller enabled? because i believe this is where the problem will eventuate, when you enable the m/b's ONBOARD RAID controllers.
Cheers

PowerNow with MSI 745 Ultra and Athlon XP2600-M

Hi, i have a MSI 745 Ultra board with a XP2600-M barton processor.
Has anybody got the powernow feature to work? I have tried and i just cannot do it. Also if i want top maually set the cpu core voltage in the bios it will not go to 1.45v!
I have the latest bios, drivers and xp pro with SP2
Cheers

Hi, thanks for the quick responses
The CPU (although a barton core) is a native native FSB 266. AXMG2600FQQ4C
i got the processor because it runs at 45W - and i wanted a low current system for bittorrent and usenet downloads. the cpu is in the epox board at the mo as it allows a 1.45v core in the bios.
i got the MSI board off ebay for a staggering 99p (bargain as its a really good board), and the processor works fine on it. I cannot remember exacety how low i can set the cpu core voltage in the bios as the cpu is back in the epox board but im sure it bottomed out at 1.5v
The latest bios i installed in the MSI board said it supported the 2600+ but the powernow just did not work.
i may get an old mobile processor like an 1800+ and see if it works with that
Cheers

MSI 785GM-E51 and Athlon II x4

I recently bought a new motherboard and processor for my computer along with 2gb of memory but seem to be having some problems. I have the motherboard connected to my HDTV by the HDMI plug but whenever I turn my tv off and then on again the pc loses its signal and the only way to get the picture back is to press sleep and wake it up or restart it. It also loses its signal whenever I play a game and quit the game. At first I thought it might be a problem with the power supply because the one I was using was only 300w when the recommended said 350w so I bought a 500w power supply but things are still the same. Another thing is that I was hoping to play Mafia 2 on it but when I run the demo it lags a lot even when on low graphics which doesn't make sense since I have whats recommended. Appreciate any help.

With a new motherboard follows a fresh installation of Windows. It is almost a must to get a stable system. But if everything else works except for the gaming, you likely installed Windows on an empty hard disk, and it is as Bas says.
Please list the max amps the new PSU can do. Whenever I read "Cool" my alarm rings.
- Eh, can your system really make it through Mafia 2 with only onboard graphics:
"Video Memory: 512 Mb
Video Card: nVidia GeForce 8600 / ATI Radeon HD 2600"
http://www.vgrequirements.info/mafia-2-pc/

MSI KM4M-V and Athlon XP2800

When I boot this I just get a beep, every 3-4 seconds ish
Tried it with everything out of the case, no memory, memory.any ideas ?different sticks of memory. (PC2100 DDR266)
anyt ideas ?
Could it be the power supply ?

Quote
Originally posted by internetuser
the MB is all in one, so nothing else on it bar memory, and the XP2800
P4 pin and 20 pin atx is already connected.
power supply is
+3.3v 17a
+5v 12a
+12V 13a
-5v 0.3a
-12v 0.3a
+5vsb 2a
+5v and 3.3 combined is 70W +5V & 3.3v + 12V combined is 170W total output 200w
That is a really poor PSU. I doubt it will last very long in that system. The risk in using a weak PSU like that comes from what it can damage from failing after being overloaded. When a PSU goes out from being overloaded, it can damage anything, or everything connected to it.

MSI Neo2 FISR2 and dynamic overclocking

Last question I think.. With the bios update i did, in the bios there is the Dynamic Overclocking option. Under this there are several settings IE.
Soldier
corporal
general
(there are like 5 options or so but I dont remember them all.. they're all military position names though)
what do these mean and wahts the difference? is it jus the degree to which the dynamic overclock will produce?

Hi Asphix,
Each are D.O.T functions for o/cing, choose the lowest for normal rate and the highest level for real big o/cing... I supposed... Maybe you should look into you manual for more info...
All the Best... :D!!!

Best MSI card for Athlon 3000 xp 333fsb

Hi There,
I've just bought a Athlon 3000 xp 333fsb to put into my MSI KT3 Ultra-ARU (MS-6380E v1.X) which I have just flashed to Bios version 5.7, but I'm having trouble getting the system to boot up when setting my fsb to 166, it's fine when left to 133fsb, and looking at other peoples posts this seems to be a regular problem. I'm considering just getting a new motherboard to see if that sorts out the problem, So I was wondering if someone could advise me on what MSI board to get, is the KT6 Delta FISR or the K7N2 Delta ILSR the more powerful board or is there another one I've missed, it's mainly for gaming to power is obviously important.
Thanks in advance,
Paul

Hello.
For gaming the NF2 ultra is a very good choice.
It has better sound than the MSI KT600 and it is faster.
The VIA KT880 chipset is out and it is a very good board, you might want to look into it.

MSI KT4V and Barton 3000+ crash problem

Hi all!
I recently upgraded my PC (MSI KT4V) with an AMD Barton 3000+ CPU. Before I had a 2600+ Throughbred.
With my old 2600+ I could run my system stable with a FSB set at 166. It couldn't go much higher that 175 before the system became unstable.
With my new Barton I have a problem :
With my FSB set at 166 games like Far Cry and COD crashes. Explorer crashed at sites with Flash content (flash.ocx error report) otherwise no problems. My Pinnacle studio 7 program couldn't render playable movies.
After I underclocked my CPU, setting the FSB at 154 giving me a total speed of 2GHz, all problems are gone now
My system reports a CPU temp at 48 degrees celsius at a 166 FSB setting but could it be a cooling problem anyway?
I have used Artic Silver as thermal paste on the CPU die.
I have reset my memory timings to CAS 2,5 even though the Corsair RAM supports CAS 2 to get the most stable system.
Is the KT 400 chipset up for the job with the increased speed?
I would like to get the most performance out of my new Barton so I hope that some of you guys can help me out here.
My system spec is :
Win XP SP1 and SP2
CPU : AMD Barton XP 3000+
Motherboard : MSI KT4V (Bios 1C0)
Soundcard : SB Audigy 2
Graphics card : Radeon 9800pro 256
Memory : 1GB Corsair XMS (CAS 2)
Power suply : Antec 480W
All latest drivers installed
Best Regards
Basse

Hi Osnavi!
48 degrees is an idle temp and about 51 stressed.
The processor is an Athlon 3000+ 333MHz
The cooler is a Thermaltake Silent Boost
I have 2 modules 512 MB Corsair XMS PC 2700 333MHz placed in slot 1 and 3
I forgot to tell that I ran memtest386 with the fsb set at 166 and I had error reports on the 128Kb L1 cache right away. Lowering the fsb to 154, the memtest came out alright.
Should I remove the heatsink and reaply cooling paste - silver-free maybe?
Strange
Any ideas are welcome
Best regards
Basse

Msi neo2 platinum / venice 3.2 start up issues!!

hello people,
I´ve recently bought and neo2 platinum and a a64 venice, but I´m having problems with the boot up.
problem: when a turn on the psu swith, (without presing the power botton of the case), the sistem turns on for itself. It doesn´t boot, just turns on, so I have to press the case botton to do so.
technical data:
msi neo2 platinum, bios updated to 1.9
a64 939 venice,
2x256mb ocz performance rev.2 pc3200
psu antec true control 550, or topower 400w.
hdd seagate 80gb sata1,
msi fx5900vtd,

Quote from: hull01 on 15-August-05, 09:46:20
thanks for your help, but it´s still doing it, the cables are all well conected, right now don´t know what I´m gone do, may be try with rma
I'm sorry, I wasn't clear. Your mobo manual will have at least two different LED connections. Only one is correct for your case. To make matters worse, it's possible that your mobo LED pins and your case LED connectors aren't color coated. The mobo I have (Neo 4 Plat) was like that. My Power LED switch on my case was different that what the book showed. If you have it plugged into the green area on the mobo then try the black area for the Power LED. Now if that doesn't work then it's something else. Remember after you plug it into the black area, remember to reset your CMOS as before.
If that doesn't work, did your board come with a D-bracket? The little bracket with LED lights on it used to diagnostic utility.

These ATI cards 9500 Pro and 9700 Pro ok for MSI K8N Neo2 Platinum and winchester cpu? Compatible?

Looking at grabbing a used ATI 9500 Pro or used 9700 Pro AGP card for my MSI Neo2 Plat since I can't use my Matrox G400.
Any problems using either of the above cards? I don't play a huge amount of 3D games so I'm not going to grab a 9800 Pro or XT or 6600GT. A 9500 or 9700 Pro would allow me to play the newer games at reasonable resolutions. Just want to make sure they are compatible.
thanx

Ok guys, thanx for the feedback. I missed the 9500 Pro sale, so maybe its for the better. If I'm going to try a bit of 3D gaming, I may aswell get a little bit better card. So here is my question for you folks:
For my MSI K8N Neo2 and AMD64 3000+ system, I want a card that will have good 2D output and good DVD playback. I want to try some 3D games, but don't want to have the minimum. I was looking at used 9500 Pro's and the 9600 XT but I've come across a used 9700 Pro and a 9800 Pro and 9800 Pro with r360 core (almost a 9800XT). So if I get a 9700 Pro, what will I be able to play smoothly at what settings and what will I be unable to play. Ultimately, I may play mostly on my projector at 858 x 484, so maybe the cards don't matter too much. If I don't play 3D games much after a while, I'll probably downgrade, but I want to give it a try. I can't afford a new 9800 Pro/XT or 6600GT.
Used cards I'm deciding between. Have to act fast.
9700 Pro $170 CAD or 9800Pro $210 CAD or 9800 with r360 core $230. Price differences between the cards is as you see there.
thanx in advance for any feedback,

MSI NEO2 - F and Athlon 3000 64 Venice

Similar Messages

Maybe you are looking for