MSI Neo2 Platinum should beep if the cpu is dead?

I have a Neo2 Platinum and a 3500+. When I try to start the computer the fan starts to spin but the monitor is black. The computer doesnt make any beeping sound. I know its either the CPU or the motherboard that is broken. Should the motherboard make any sound if the CPU is dead?
My D-bracket says "Early Chipset Initialization" and "Bios Sign On" (shows info about logo, cpu brand name etc..)
Depends on how I start up the computer (psu power switch or button)
The problem started a few weeks ago. The computer made lots of reboots and now I cant even access bios. Ive replaced all other components (ram,psu, HDD) but nothing happens. So is there any way to find out if its the motherboard or the cpu?

Quote from: bennyfax on 25-October-06, 07:59:57
Ok thanks for trying to help me but its not the HDD's. Its the motherboard or the cpu. I just dont know which one.
your CPU is not dead for sure.
try barabone setup,(leave only basic parts which is necessary to boot) and Clear CMOS Guide(remove power cord from PSU before proceed).
test with one stick of memory only.

Similar Messages

New Msi Neo2 Platinum....many problems

Here`s my setup:
A64 3200 939 winny watercooled
Msi Neo2 Platinum bios ver 1.4 vcore 1.50 HTT x4
2x512 corsair xmspc3200xlpt timings 2.5-3-3-7 1T vdimm 2.85 235x10 fsb 1:1 in the first 2 slots next to the cpu and tried the last 2 also
BFG 6800 GT OC 256mb 1.65 volts
SB Audigy 2 zs in the third pci slot
80 gig Maxtor
80 gig WD SE
Truepower 550 about 2 yrs old 12v amps are rated at 24a
6 case fans
waterpump is on the 12 volt rail
VC is on its own rail or leg
hdd`s and floppy are on thier own rails or leg
Fans and water pump is on its own rails or leg
Cd rom and burner is on its own rail or leg
i ran memtest on my on my sticks seperate and together and passed at 250 fsb 1:1 for 5 hrs and they are a matched set
im getting random errors,device driver errors and crashes in HL2 and in 3dmark05 and in 03 i get as high as 2500mhz and my rig reboots itself tried changing ram timings to 3-3-3-8 and no change
curious my psu not enough for the job amp wise ? i checked my 12v5v and 3.3v rails with a dvom and im getting 11.96 on the 12v rail under load, 4.98 under load and 3.28 under load but the bios reads about .20 to .27 under what my meter says
this psu ran flawless with a NF7-S ver2 ,barton xp2500 mobile@2477mhz and a 9800 pro
im new to the board but not new to o/cing and this board has me baffled any ideas would be helpful

Sounds like you are suffering from the NF3 + 6800 combination problem.
Theese things that gives troubles are dx9 it seems.
Interesting thread:
NF3 & 6800(series) compatibility ???

MSI Neo2 Platinum (Winchester3200) - strange instability issue in Windows

My specs:
Winchester 3200 CPU
MSI Neo2 Platinum 1.4 bios
2 x 512 Kingston PC4000 3-3-3-8-1
Gainward 5900Xt GS
Seagate 160Gb SATA on SATA port 3
The problem seems quite odd to me, so I decided to post here. Generally, the PC is stable, passes more than an hour of Prime95, 3d marks run fine etc.. but in Windows (XP Sp1) I'm getting this annoying issue: when I let the system run idle for a while, with none or some windows open but no programs active, my computer literally freezes. I can move the mouse, but i can't open any windows or click any buttons. Still, the keyboard is responding so I hit ALT + CTRL + DEL and get the Windows Security window. There I click on the Task Manager and all i get is an empty desktop, with the wallpaper but no icons or any activity whatsoever.
Any suggestions? Thanks in advance.

Quote from: Lorex on 10-March-05, 21:43:00
Nope.. And I hardly believe it's a software issue. Will try a fresh install of XP today, nut the reason of such strange behaviour escapes me :] Cmon people, any ideas ?
If you problem isn't related to software, then the only other thing that comes to mind is that overclocking is the culprit. I'm not overclocking anything (except my 3d card, and that only slightly) and have no such problems with my K8N Neo2. You describe a strange problem, certainly, and in my own experience such behaviors--system runs great in some normal situtations but in others it doesn't--have always been related to overclocking of some kind. If you aren't overclocking anything then it's probably software induced. Good luck!

MSI NEO2 Platinum, problem with mouse Genius PS2 optical

Hello,
I have a MSI NEO2 Platinum motherboard with a mouse Genius optical PS2. When the S.O. init the mouse is not detected, I unplug and plug again the PS2 port and the mouse work perfectly ! ... The mouse is working perfectly, I test it in another PC, the problem is the motherboard !
The same situation is on Windows XP Professional and Linux Ubuntu 5.10.
Please help me, thanks for your attention !
Raúl.

Raúl,
The PS2 slot is NOT a hot plug! If you remove and reinstall it while there is power to the mobo you stand a very good chance of destroying the PS2 Slot.
Take Care,
Richard

Msi neo2 platinum / venice 3.2 start up issues!!

hello people,
I´ve recently bought and neo2 platinum and a a64 venice, but I´m having problems with the boot up.
problem: when a turn on the psu swith, (without presing the power botton of the case), the sistem turns on for itself. It doesn´t boot, just turns on, so I have to press the case botton to do so.
technical data:
msi neo2 platinum, bios updated to 1.9
a64 939 venice,
2x256mb ocz performance rev.2 pc3200
psu antec true control 550, or topower 400w.
hdd seagate 80gb sata1,
msi fx5900vtd,

Quote from: hull01 on 15-August-05, 09:46:20
thanks for your help, but it´s still doing it, the cables are all well conected, right now don´t know what I´m gone do, may be try with rma
I'm sorry, I wasn't clear. Your mobo manual will have at least two different LED connections. Only one is correct for your case. To make matters worse, it's possible that your mobo LED pins and your case LED connectors aren't color coated. The mobo I have (Neo 4 Plat) was like that. My Power LED switch on my case was different that what the book showed. If you have it plugged into the green area on the mobo then try the black area for the Power LED. Now if that doesn't work then it's something else. Remember after you plug it into the black area, remember to reset your CMOS as before.
If that doesn't work, did your board come with a D-bracket? The little bracket with LED lights on it used to diagnostic utility.

BSOD using MSI NEO2 platinum

Hey.. i reg for this forum just for this screw up prob.. heres my spec.
SilverStone:
AMD64 3500+ 939 with xp90 | MSI Neo2 Platinum mobo | 2 x 512 Cosair TwinX ddr400 ram with heat spreaders | Sapphire x800 pro with artic silencer 4 vga cooler | SB audigy 2 with gold input jacks connected with Creative Megaworks 5.1 550 | TDK 1616DN 16x DVDrw | Pioneer Slot in Drive A106 | Samsung LCD 172x | Antec 550W Psu | SilverStone TJ03 Full Tower Casing
Been having unexpected BSOD and reboots my system after the screen comes out . i am trying the settings for the memory as stated in the corsair website . hope it turns out well .. i had used memtest on the default settings of 2 2 2 5 or something and goes well but not in winxp pro .. will restart due to BSOD. any ideas ?

what slot do yu mem fitted on?
there is only 1 combination that seems to work with that board ( i have same board) fried but,,
slot 1 and 2 green ( 1xt from bottom and the SECOND ONE pURPLE)
thats looking at the board fitted in the case . slot 1 is the bottom one).
tHE BOOK SAYS THAT 1 AND 3 WORKS TOO BUT IT DIDNT( its for DDR 333). TRY THAT.

I am considering a base 21" iMac ($1099 @ Best Buy) for home use. It would be my first Mac. Is the base model powerful enough for everyday home use and some light video editing or should I upgrade the CPU, Ram and to a Fusion drive?

I am considering a base 21" iMac ($1099 @ Best Buy) for home use. It would be my first Mac. Is the base model powerful enough for everyday home use and some light video editing or should I upgrade the CPU, Ram and to a Fusion drive?
Purchasing with the upgrades through Apple would add about $800 over the Black Friday deal at Best Buy. Just looking for some advice if I will be satisfied with the based model.

All models will do what you want. Upgraded models will do it faster than the standard models.
Just why are you thinking of switching to a Mac?

MSI neo2 platinum problem, forced to reset BIOS everytime I turn on the PSU

I just got my neo2 platinum mobo. Everytime I switch it ON all the led's at the back (diagnostic) turn red/orange and never turn green.
I have to reset the bios everytime to get it to post successfully. (bios is the original bios, no flashes done)
Processor: 3000+ (939)
Anyone else have this problem? what causes it?
[update] the bios version is 1.3 which is the latest on the msi website
System Specs..
AMD Athlon 64 3000+ 90nm (socket 939)
MSI K8N Neo2 Platinum
1 GB Kingston HyperX DDR 400 CS2
SBlive
Nvidia GeForce4 Ti4200 128MB MEM
Logitech MX510
1x80GB WD HDD with 8MB cache
1x120GB WD HDD with 8MB cache
Lite-On 48x CD-RW
NEC 16X DVD RW Drive
RAIDMAX Black Aluminum Gaming Case with 6 case fans and 420W PSU

I think the power supply may be the problem
Once you reset the bios you don't need the amps to spin up the drives, as they are already spinning, saving you about 3 amps I bet. If the newer bios doesn't help, try unplugging half those case fans, the non boot drive, and take the cd's out of you optical drives so they dont spin up, then try cold booting your box a couple times. If it works you know you need a new power supply.
If it doesn't perhaps you've got a grounding problem? Are you positive that nothing metal is touching your motherboard where it shouldn't? If that isn't it, Id assume the cmos never really clears, and then take the battery out of the motherboard for a good hour while the power supply is unplugged, then give it another shot. I've seen a bunch of DFI boards do weird stuff like that before, the exact same thing actually. Nvidia has a few odd issues with the nforce chipsets and the cmos.
Oh, since you asked, 3000+ is 1.8 ghz. It will probably run at 2.4ghz easy (1.4 volts), thats a 90nm chip

MSI neo2 Platinum Instability

I just got my whole new computer setup within the last few days. The problem I have come to now is that my system pretty much randomly reboots itself every so often( like 1-5 hours). I've had this happen both while the system is under load being burning a dvd and also when i'm just surfin the net. One of the first things I did was to flash the bios to version 1.4 before i installed the os. I also read a guide that I saw someone post on here about the settings for the neo2 motherboard and adjusted what was needed accordingly and checked that my bios is set about the same for stability. At first I thought it was just my video card screwing it up as when I put the system together it was with a very old card but then I got the new one and the same thing keeps happening. Then I thought it may be that my windows installation was corrupt or just a bad one so i formatted my drive and redid the installation, but to no avail, I still got the same random reboots. The temperature readouts in the bios are 37 for the cpu and 30 for the case so i don't think its overheating or anything. I am wondering if anyone has experienced similar problems or knows of this problem and can lend a suggestion to what the problem is.
My setup is as follows:
MSI K8N neo2 Platinum
AMD 3500 90nm
1 gig OCZ pc3200 platinum rev. 2
ATI All-In-Wonder 9800
OCZ 420 watt power supply
western digital 74 gig raptor
thanx for the help
Freak

Quote from: Wonkanoby on 25-February-05, 16:05:09
turn of auto matic reboots so you can see the bsod
and post stop code and any driver etc it blames
Memtest86
I'm not sure how to turn off automatic reboots. I only see the blue screen for literally a split second just before it reboots.
I'm using WinXP btw and have all updates installed incause that matters. Anyway everytime it restarted in the first install it used to blame the video driver but with this new second install of windows i have a different video card and different drivers so it doesn't say "device driver wrong for video card(or something similar) anymore. Now it says pretty much the same thing but doesn't limit it to the video card, it just says device drivers are wrong or something like that.

K8N Neo2 Platinum + Athlon 64 X2 5000+ CPU

I found a local supplier that is selling the Athlon 64 X2 5000+ CPU socket 939.
My question is, will the 5000+ work on the K8N Neo2 Platinum board?
I ask because MSI's CPU support status only shows compatiblity up to 4800+, Chart here.
My current BIOS is W7025NMS V1.C

Quote from: Nexus6 on 26-July-06, 23:33:08
I double checked with my supplier here in Calgary, and he assures me it is a 5000+ socket 939.
They are suppose to getting them in the next week or two. :D
ok, trust me, the supplier is lying.
http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_609,00.html?redir=CPT301
i doubt that your supplier knows better than the manufacturer.

915P/G NEO2 Platinum - Do I have the correct settings? Please help.

Hi All,
I am having a nightmare!
Id like to know if the following settings are correct and what the correct BIOS settings should be?
915P/G NEO2 Platinum
LITE-ON DVD-R - on IDE1 using supplied red cable - using using both ends not middle connection.
Samsung 250gb SATA - on SATA1
Samsung 250gb SATA - on SATA2
I messed around with the BIOS a bit and now when ever try to install XP PRO it comes up with the following error:
'REBOOT AND SELECT PROPER BOOT DEVICE OR INSERT BOOT MEDIA IN SELECTED BOOT DEVICE'
I am out of ideas so any help would be much appreciated.
Thanks in advance,
Andrew

Indeed but how should I set the Drive configurations within the BIOS as the system previously had one single drive attached to the middle IDE red cable??

OEM Visiontek AGP GeForce2 GTS, 32MB DDR on MSI Neo2 Platinum as temp fix?

I'm taking my ATI 9700 Pro to ATI to have it RMA'd for some rolling interference lines. I've done troubleshooting and its the card.
Will I have any problems using this Geforce2 GTS AGP card as a temporary replacement while I wait for the ATI card to be fixed? I'm swapping it and I get $5 for my Matrox G400 max AGP card. For obvious reasons, I'm not keeping and using the G series Matrox G400 since it won't work in my PC with the MSI Neo2 and BIOS 1.4 etc etc
So any problems using this as a temporary replacement?
OEM Visiontek AGP GeForce2 GTS, 32MB DDR
thanx for any feedback,

Forgot to do that! Its working fine though. I'll try to clean out the old ATI drivers. This is only temporary and I'll be wiping this system clean and starting over anyways.
So far its ok. Another troubleshooting verification that the 9700 Pro I had was faulty. With this gforce2 gts the rolling horizontal lines are absent.

Is it worth buying MSI Neo2 Platinum...

So I figured that with 3 sticks of RAM, you cannot have dual channel on nForce 3 boards (even though you can on nForce 2), and my overclock would be not nearly as good...
So, should I maybe stick with Socket 754 and not 939?
Would FOUR sticks (4x256) give dual channel?
It seems like Neo2 would be a waste of money for me...
EDIT: OK, I read that TWO sticks of DOUBLE-SIDED RAM are not that well supprted either, BUT would TWO DOUBLE-SIDED RAM chips give DUAL channel at least?

Quote
Originally posted by jimmytop
Hopefully someone will correct me if I'm wrong but:
1) Double sided has nothing to do with whether or not the ram is single or dual channel. There's single channel RAM that's double sided. They are two different things. Double sided just means it has chips on both sides of the PCB. Double sided does NOT mean dual channel.
2) 754 boards do NOT support dual channel RAM, period. I think you can put dual channel ram on a 754 neo plat, but it will only operate in single channel mode. Regardless of whether you have two or three sticks installed.
BTW, get the 939. The price is not that much higher. Good luck.
DIRECTLY FROM FAQ:
The memory controller of AMD64 does not officially support 400mhz speed on two doublesided sticks of RAM, or on 3 sticks of RAM (regardless of single/double side), however this board seems to be very tolerant concerning this, change your ram setting from auto to 200, and see if it helps - if not, try with other RAM, there's no guarantee it will be able to function at 400MHz.
Please note that this is a limitiation in the AMD 64 CPU's memory-controller, and not a limit in the motherboard!
CAN I GET DUAL CHANNEL WITH THREE STICKS OF RAM? IF NOT, then there is NO POINT in 939 because it would be single channel JUST LIKE 754...

K8N Neo2 platinum: should I flash to 1.3 bios?

Currently I have BIOS 1.1. Does anyone recommend that I should flash to 1.3?
I was not sure what this buys you. I do have some problems with temperature reading, perhaps this might go away.
Anyhow, maybe someone knows if it fixes some major bugs lurking out there that I might want to fix now before I find them.
What is your recommendation? Perhaps I should wait until version 1.4 comes out?

Well. I have the same board (Neo2) and the bios upgrade from 1.2-1.3 stated that it resolved incorrect temperature readings according to the MSI driver's download page. I would assume that since you have 1.1 this would also be the case.So in answer to your question, YES.

MSI NEO2 PLATINUM Shut down

OK has anyone had this happen to the when I overclock my cpu to say 3gig and try to push 1.85volts through it my mobo and everything just shuts down the only thing that remains powered is the power led on my case??? Very odd I was thinking it could be my antec true power 550W psu but it does supply 24amps on the 12v rail but then again even though my cpu is prometeia cooled the bios still reads the temps wrong now does the msi have a cpu protection built in as in a setting in the bios because I couldnt find it ??
Any answers would be great
Cheers

No the system doesnt start back up it just black screens and powers off all except the on led when I do oc some times it will restart in safe mode and I know this cpu does over 3gig as it has in another machine at 1.85v thats why I was asking about a motherboard or cpu protection shut down thingy ??? Oh and yes my agp/pci is always locked at 66

MSI Neo2 Platinum should beep if the cpu is dead?

Similar Messages

Maybe you are looking for