Msi nx 600gt bios

i need msi nx 6600gt bios urgently  the card is 128 mb version non vivo  please also give me some guide lines on bios flashing

Well, there you are: MSI 6600GT-TD 128
But if the crappy picture appeared without modding bios before the card is probably dead or overheating! So the bios will most certainly not help at all.
Get latest driver, check temps then report back.

Similar Messages

  • MSI GX740 Unlocked BIOS | split

    Hello.
    I would like too unlocked BIOS for my MSI GX740.
    BIOS: E1727 IMS.10F  05/27/2011
    EC: 1727EMS1.406  05/28/2010
    Can Enybody help me?

    Normal, unlocking bios are not related to official stuffs.
    I can start work over it once donation is received:
    https://forum-en.msi.com/index.php?topic=134259.0
    and to send back to you when its done after 3-4 hours later

  • MSI B75IA-E33 - BIOS 17.6

    MSI B75IA-E33 - BIOS 17.6
    Unable to download the above BIOS version from the US, EU or Asian download locations on the product support download page..
    Release date says 30th Oct 2013.
    Is there a reason this BIOS is unavailable and when will it be available for download ?.

    Thinks its an error, Beta .H64 was released on 11/2013 says 10/2013 for H60 which would be the mass production release of this bios.
    I attached .h64 for you since I assume you are having problems.
    You may flash with the forum flash tool option 1, run the .bat from pure dos, or manual flash.
    Syntax:
    fpt -f [name of bios] -savemac

  • MSI X800XT PE bios

    anyone that could give me a copie of MSI x800XT PE bios? please  
    I would really like to have a MSI bios  

    read:
    For ATI Radeon X800 Pro softmod, please read (link provided by mopey):
    http://www.ocforums.com/showindex.php?t=312063
    For ATI Radeon X800 Pro voltage mod, please read (link provided by NovJoe):
    http://www.vr-zone.com.sg/?i=817&s=1

  • MSI GX60 Hitman BIOS on GX60 1AC

    I saw that MSI GX60 Hitman BIOS had an update for Windows 8.1 but on the GX60 1AC (Windows 8.1) doesn't, is it Okay to flash the BIOS of GX60 hitman Edition to a 1AC? 

    Oww, Thank you   

  • Msi z77a-g43 bios code b4 black screen

    Hi, i have this mainboard update to day with bios 2.12 and this card reader, coolbox cr600v2. Well, the problem is that when i turn on the system i have black screen bios with code b4, any solution?

    won't boot with the card reader
    Board: MSI Z77A-G43
    Bios: Version 2.12
    VGA:  Asus GTX 780 DCUII
    PSU:   Corsair hx750
    Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
    MEM: CDIMM1: Kingston HyperX KHX1600C9D3/4GX x2
    HDD: Crucial M4 256GB
    COOLER: Noctua U12P
    OS: Windows 7 64bit Professional

  • MSI K9VGM-V, BIOS changelogs?

    Would someone be so kind and please explain where i could find the changelogs for the MSI K9VGM-V BIOS, also where i can download them.
    most important is to find the changelogs to further track down a possible solution.
    the url: http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=260 doesnt really help me at all.
    "Live Update" and "Live Update 3" is not an option.

    Hello and welcome!
    Solution to what problem? BIOS updating should not be the first option. Also please supply a list of your hardware, including the PSU.
    From googling a little I find the latest update to be 1.7. Doubt there are new updates. What do you currently have?

  • MSI X79MA-GD45 BIOS/boot problems.

    Hi I've been having problems getting my board to boot consistently.
    System specs are:
    MB: MSI X79MA-GD45 (BIOS 3.1)
    CPU: Intel 3820 (C2 stepping)
    RAM: 32GB (4x8GB) Kingston HyperX Beast 2400MHz (Running 1333MHz, auto)
    GPU: Zotac GTX 680 4GB
    PSU: Corsair 860i
    Most times I have to clear CMOS before the system will boot.
    Soft reboots are fine, however, if I change stuff that requires a proper reboot, fx enabling VT-x, the system will need a clear CMOS again before it will boot.
    The error I get seems to be videocard related, 1 long 2 short beeps, however the videocard works fine in my old system.
    I can usually get the system to behave for a little while by reflashing BIOS.
    After clearing CMOS the system boots EVERY time and runs flawless.
    PS prior to BIOS 3.1 multiplier 43x (and 44x, partially) were working, now it seems to max out at 42 (regardless of BIOS setting) but this isnt really an issue as much as the system instability at stock settings.
    edit: corrected BIOS error beep typo

    In combination with an i7-3820 the new Win8 bios versions for all X79 boards seem to be troublesome (that's also the reason for the multi limit).
    Downgrade to the prior version (1.7) with the attached archive and retry.
    For flashing >>use the MSI HQ Forum USB flasher<< and with it point to the attached and NOT unpacked bios archive (Mode 1: Point to archive).

  • MSI Gt70 unlocked bios request to kill throthelling

    msi gt70 onc
    Bios version :   E1762IMS.10U
    Build Date and Time:  01/21/2013 15:31:00
    EC Version :  1762EMS1 Ver4.03
    EC Build :   03/13/2012
    need full unlocked bios for overclocking and activate some hidden options to kill trothelling in games.
    Send me your donation for paypal pls
    hope u can help

    Quote from: gracer89 on 16-January-15, 08:18:20
    would like to have an unlocked bios send me donation for ur work as pm
    Quote from: gracer89 on 16-January-15, 08:18:20
    would you have a manual for me?
    manual about what...?
    Quote from: gracer89 on 16-January-15, 08:18:20
    would like to have an unlocked bios send me donation for ur work as pm
    check PM

  • MSI Z77 MPower Bios - NO POST

    Hello,
    Unfortunately today I stumbled upon a problem.. I was updating the Z77 Mpower bios and it all worked flawlessy for the bios update, when It restarted to update de ME it stopped at 68% and restarted by itself.. It's useless to say that the bios won't start, it does not even post...
    The real problem is that this had happened to me a while back too with the other bios so both of them seem bricked 
    So is there any way to fix it? Since both updated completly the problem happened after a restart and when ME was updating.. It happened exactly the same way with both bios , when updating at 60% + the computer restarted itself and never started again..
    Well I'm getting somewhat desperate as I'm in a need on this computer running..
    Please tell me there's something that can be done, because I don't want to rma either as I'm in raid 0 and I'll be loosing all of my things..
    Thanks you, regards!

    You could also buy a programmer and do it yourself.  I did when I bricked a board.  :-)
    I got an SPI programmer based on the CH341A chip and in circuit programming clip for about $20 shipped from China.  Search for EN25T80 or spi programmer on eBay.  It will be less than $10 for a cheap programmer.  The downside is the long wait for shipping.
    It turned out that in-circuit programming with a clip did not work on any MSI boards I had.  But connecting the programmer to the JSPI1 header worked perfectly.   The clip works fine with other board manufacturers.  It must have something to do with the way MSI has the bios chips wired.

  • MSI GE60 2OC - Bios & EC Update

    Hello.
    I want to update the uefi-bios from my msi ge60.
    Bios Version E16GCIMS.611
    EC Version 16GCEMS1 Ver5.06
    I tried to flash this one : w8_E16GCIMS.617.zip
    But i got the error message that the romid is not compatible with existing bios romid.
    Why do i get this error? Do i need to update the EC 1st and then the bios?
    Thanks
    Haembi

    Quote from: Haembi on 16-March-14, 10:35:08
    Hello.
    I want to update the uefi-bios from my msi ge60.
    Bios Version E16GCIMS.611
    EC Version 16GCEMS1 Ver5.06
    I tried to flash this one : w8_E16GCIMS.617.zip
    But i got the error message that the romid is not compatible with existing bios romid.
    Why do i get this error? Do i need to update the EC 1st and then the bios?
    Thanks
    Haembi
    For now I would sit tight on flashing the BIOS or the EC. There seems to be an issue with it right now and we are trying to work with MSI to get it sorted out.

  • MSI A78M-E45 BIOS Request

    Hello best and brightest minds of the MSI forum.  I just bought the above board, and after buying and still using the MSI A85X-G65, the quality of MSI and the BIOS impressed me on the FM2 board.  Now I know that the new board isn't top shelf, it is HS'ed and the tip top A78 that MSI offers.  I OC my Athlon X4 750K, and the BIOS over volts the CPU.  There is also no voltage adjustments that I can make what-so-ever, which is discouraging to say the least.  I emailed MSI and got a generic response of we will pass this request off to our BIOS engineers.  Is there any way to make a new bios, or crack and hack the one currently in place? Also, how long does it take to hear back if the BIOS team will pick up the project.  I have heard that MSI is one of the best when it comes to requesting BIOS features.
    Thanks!!!

    Most FM2 boards - especially the value ones - won't support overvolting and are not intended to offers such beacuse of the power design not being meant for such tasks. Therefor MSi will most likely just tell you that it is not supported. For bios modding place a request in BETA & MOD BIOS Section but I've never heard of some for FM2 boards besides it will not help with the technical limitations.

  • MSI A4000-068US BIOS MOD REQUEST

    As was done with the A5000 recently(https://forum-en.msi.com/index.php?topic=132858.0), i was wondering if the same could be done with the A4000. basically some of the requests included:
    Reverse/swap the notebook keys functions of the "Fn" key with Left "Ctrl" key like you have done with other models.  I would also like to know if you could enable us to change the GPU Frame Buffer Size from the fixed 256MB to a user selectable 32MB - 512MB like other notebook manufacturers have done with this Nvidia chipset.  Any other performance options such as making FSB-Memory Ratio or Memory Clock user selectable in BIOS would be awesome!  additionally if there was a way to undervolt CPU to extend batt life would be great as well.
    thanks for all your help

    Quote from: jimboee on 10-July-10, 11:25:26
    It has been over 120 days with no reply from Svet. This may be bumping, but patience and cash donation  which I did both,  did not help.
    I got a lot more response from the request being bumped!
    Quote from: jimboee on 05-January-11, 15:39:43
    Posts: 15
    View Profile Email Personal Message (Online)
    Over a year after my request and a donation too, I finally get a reply!!
    I posted my bios version a year ago but still can not change it.
    I still would like it to happen if you can do it.
    thanks,
    jim   
    Re: MSI A4000-068US BIOS MOD REQUEST
    « Reply #7 on: 17 January 10, 01:05:46 »
       Reply with quoteQuote
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in Sat 01/16/2010 at 15:54:02.39
    Mainboard:  A4000
    PCB Version:  Ver.001
    BIOS Version: E1451NMR VER.10I
    BIOS Date:  10/19/2009
    EC-FW Version:  1451EMS1 Ver4.12, 08/26/2009
    Request has been sent out to you at 20.2.2010 г. 19:02,
    almost a year ago.
    You didn't received it or?

  • User guide: MSI HQ USB BIOS Flash Tool

    Guide based on USB tool v1.17c
    HOW TO properly use the MSI Forum HQ USB Flashing Tool to update your BIOS
    This user guide provides a step-by-step explanation for properly using the >>MSI Forum HQ USB Flashing Tool<< to prepare a USB Flash Drive for a safe BIOS-Flash in a pure DOS Environment. The tool itself will not perform the actual flashing operation.  It will "only" help you to get your USB Stick set up for an automated DOS flashing procedure which requires final confirmation.  (If you should run into any problems before you are prompted for final confirmation in DOS, no attempt to flash has been made yet and there is no danger of a bad flash.)
    NOTE: If you are having problems getting your USB device to boot correctly, you may need to format it correctly as the geometry data may be incorrect. You can do that by pickup option "Fix My USB key" from the Tool or by using >>> THIS <<< tool here! For future usage you can skip this step, it need to be done only once if your stick need adjustment.
    Symptoms that your USB key need a fix after booting from the USB key:
    * Error: "No bootable partition in table"
    * Blinking cursor in a top left corner and nothing happens
    * "RIVER2 MSI"
    * "Error loading operating system"
    * "Missing operating system"
    * "Disk in drive is not a bootable"
    * Booting from selected USB key is IGNORED, the other/typical OS continue to load as usual
    If still no change after using "Fix My USB key" Tool's option or HP Formatter Tool as alternative.
    Then try with different USB key, the issue is there.
    Note: Those USB keys who support "U3 Smart", this "feature" must be removed before proceed.
    Refer to followed link: http://u3.sandisk.com/launchpadremoval.htm
    Read the three notes that follow first before you move on:
    1. Note: Before you even think about flashing a different BIOS, be sure that your system is stable. If it is not stable, make it stable first. (Read >>here<<.)
    2. Note: Make sure your system meets the preconditions and system requirements mentioned below before you attempt to use the tool.
    3. Note: Do know that flashing your BIOS, be it with the help of the tool or otherwise, is done at your own risk.
    Contents of the Guide:
    0. Preconditions & System Requirements
    1. Basic Description of Functionality
    2. Installing/Starting the tool.
    3. Choosing a Preparation Method
      3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
      3.2. Method 2: Processing a BIOS File Directly
      3.3. Method 3: SureHands Live Update
      3.4. Method 4: Geometry Change
    4. Selecting the USB Flash Drive for preparation
    5. BIOS Settings, Booting & Flashing
      5.1. BIOS Settings to Check
      5.2. Booting from USB Flash Drive
      5.3. Flashing Procedure/Running MemTest86+ & CMOS-Clear
    6. FAQ: Common Problems & Solutions
    7. Version History
    0. Preconditions & System Requirements
    The main precondition for using the tool is a working & healthy Windows installation on the system that needs the BIOS flash.  The Tool is designed to work with MSI Retail Boards & Laptops only.
    Please note mainboards of other brands and OEM boards that are manufactured by MSI but sold by Medion, HP, NEC and others are not supported. If you have an OEM board that needs a BIOS update read this topic: >>OEM boards manufactured by MSI<<
    Supported Operating Systems: All current Windows Versions (32bit & 64bit, any service pack (SP)): Windows NT, Windows 2000, Windows 2003, Windows XP, Windows Vista, and Windows 7.
    The second requirement is that you have a fully functional USB Flash Drive that uses the FAT file system (FAT/FAT32).  NTFS is not supported. If your USB Flash Drive is using the NTFS File System, reformat it to FAT or FAT32.
    As the tool also provides a Live Update Option ("SureHands"), you'll need a working internet connection if you want to choose this method. Not all boards are supported at this point.*
    * Check section 3.3 of this guide to see if your board is currently supported by the SureHands feature.
    1. Basic Description of Functionality
    The MSI Forum HQ USB Flashing Tool will help you to easily prepare an USB flash drive for an automated BIOS flash in a pure DOS environment, which is the safest way to perform such a procedure. The tool will also allow you to run MemTest86+ in a pure DOS environment. However, the preparation of your USB Stick is done in Windows and basically includes two steps:
    (1) The device will be made bootable.
    (2) All necessary files (incl. BIOS file, actual flasher and MemTest86+ executable) and all DOS commands that are needed to flash/test memory will automatically be implemented.
    Because the tool does not reformat your USB Flash Drive*, no files that may currently be on the stick will be lost during the procedure.  Just make sure that there is still some free drive space, otherwise there will not be enough room for the files that are needed for BIOS Flashing.
    * Excluding the Geometry Change method which will destroy all data on the USB storage device.
    2. Installing/Starting the tool
    Treat the forum's USB Flashing Tool like a regular application.  Download it to and run it from your hard drive, there is no need to copy & start it from the USB Flash Drive that you want to use for flashing.  Both, the installer version and the stand-alone version, do precisely the same job.  Which of the two versions you use, is solely up to you and your preferences.  The stand-alone version can be started directly by clicking on the executable file.  The installer version will perform an installation and provide you with an entry in your start menu and a desktop shortcut to start the tool.
    When you start the tool a DOS box should open up to provide you with status messages and prompts.  Do not close that box unless you want to abort the preparation procedure!
    Please ensure that you connect the USB flash drive you wish to use before starting the Tool!
    NOTE: If you do not connect your USB storage device before starting the tool, or the tool doesn't detect it. You can still insert the drive letter, as the tool will continue as normal.
    The tool will first check, if an MSI mainboard is installed in your system and show you its model name and PCB Version in a message box. Click >OK< to continue to choose the tool's preparation method that you want to use to prepare your USB Flash Drive.
    3. Choosing a Preparation Method
    If your MSI Retail Board is properly detected and you have pressed the >OK< button in the message box, an option box will pop up that allows you to choose between three different operating modes.  The options you can choose from are more or less self-explanatory, however, read the detailed description if you are unsure how to proceed at this point:
    3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
    Official MSI BIOS-Updates that can be downloaded from the product site of your board model do usually come as .ZIP or .RAR archives that contain the actual BIOS File and the corresponding AWARD or AMI flashing utility (depending on the BIOS Type of your board).  If you have downloaded such an archive, you should choose the first method from the option box. 
    You do not need to extract the files from the BIOS archive.  The tool will ask you to point it to the archive you downloaded and automatically extract the BIOS File and the AMI or AWARD flashing utility and put it them on your USB Flash Drive.  You don't have to worry about anything else.  All you have to do is to remember where you saved the ZIP or RAR file you downloaded:
    3.2. Method 2: Processing a BIOS File Directly
    If you do not have a ZIP or RAR archive that already contains a BIOS File and the proper flashing utitility, but only the plain unpacked BIOS File, choose the second Method from the option box.  In most cases BETA BIOS Files supplied by MSI Support or shared here in the Forum do not come with the proper flashing utility.  If the MSI Forum HQ USB Flashing Tool is told to process a plain BIOS File, it will automatically check the type of BIOS File (AMI or AWARD) and then select the proper flashing utility that needs to be used.  All you need to do is point the tool to the BIOS-File that is supposed to be flashed:
    3.3. Method 3: SureHands Live Update
    "SureHands Live Update" is the third operation method you can choose from the option box.  It provides a much safer and more reliable alternative to MSI Live Update as the actual BIOS Flash is performed in a pure DOS environment as well.  If you decide to use this option, you do not to supply the tool with a BIOS-Archive or a BIOS-File.
    Not all MSI Retail Boards are currently supported.  With every update of the USB Flashing Tool more boards will be added.  At present, you can use the "SureHands" Live Update method with the following boards only (the list will be updated regularly):
    AMD based boards:
    K8N Neo4-F (MS-7125, PCB 3.0)
    K8NGM2-FID (MS-7207, PCB 2.0)
    K8N Diamond Plus (MS-7220, PCB 1.0)
    K8N Neo3 (MS-7135, PCB 1.0 & 2.0)
    K9A Platinum (MS-7280, PCB 1.0)
    K9A2 Platinum (MS-7376, PCB 1.0)
    K9A2 CF-F (MS-7388, PCB 1.0)
    K9N Neo-F (MS-7260, PCB 1.0 & 2.0)
    K9VGM-V (MS-7253, PCB1.0)
    K9N2GM-F V2 (MS-7509, PCB 1.0)
    K9N Neo V2 / V3 (MS-7369, PCB 1.1)
    K9N Platinum & K9N SLI Platinum (MS-7250, PCB1.0)
    K9N2 Diamond (MS-7375, PCB 1.1)
    K9N2 SLI Platinum (MS-7374, PCB 1.1)
    K9N2 Zilent (MS-7374, PCB 1.1)
    K9N2 Neo-F (MS-7511, PCB 1.1)
    DKA790GX Platinum (MS-7550, PCB 1.1)
    790FX-GD70 (MS-7577, PCB 1.0)
    790GX-G65 (MS-7576, PCB 1.0)
    Intel based boards
    HydroGenX48C & X48C Platinum (MS-7353, PCB 3.0)
    X48 Platinum (MS-7353, PCB 1.0)
    X38 Diamond Plus
    X38 Diamond (MS-7353, PCB 1.0)
    X38 Platinum (MS-7353, PCB 1.0)
    EFINITY-FP (MS-7395(E), PCB 1.0)
    P35 Neo Combo-F (MS-7365, PCB 1.0)
    P35 Neo2 Series (MS-7345, PCB 1.1)
    P35 Platinum (MS-7345, PCB 1.1)
    P35 Neo-F (MS-7360, PCB 1.0)
    G33 Platinum (MS-7345, PCB 1.1 & PCB 1.2)
    P965 Platinum (MS-7238, PCB 1.1)
    975X Platinum PowerUp Edition (MS-7246, PCB 2.1)
    865PE Neo2-P Platinum Edition (MS-6728, PCB 2.0C)
    P7N SLI Platinum (MS-7380, PCB 1.0)
    P7N2 Diamond (MS-7523 PCB 1.0)
    P7N Diamond (MS-7510, PCB 1.0)
    P7N SLI Platinum (MS-7380, PCB 1.0)
    P6N Diamond (MS-7320, PCB 1.0)
    P6N SLI Platinum (MS-7350, PCB 1.0)
    P6N SLI-FI (MS-7350 PCB 2.0)
    P6N SLI V2 (MS-7346 PCB 1.0)
    ECLIPSE SLI (MS-7520, PCB 1.0)
    ECLIPSE Plus (MS-7566, PCB 1.0)
    P35 Neo3-F (MS-7395, PCB 1.0)
    After selecting "SureHands" from the option box, the tool will automatically check for all available official BIOS-Versions for your mainboard.  It will also look for the latest available BETA BIOS Version for you board and save that information in a TXT-File on your Desktop:
    Note: The SureHands option will not provide you with the latest BETA BIOS, it will only provide the information.
    When the tool is done scanning for official BIOS releases for your board, it will give you the possibility to manually choose the BIOS Version you want to flash.  SureHands Live Update will not automatically select the latest version and use it for flashing, it will give you the chance of choosing between all available official BIOS releases that are available:
    Note that the "May not exist" comment that appears behind some versions does not mean that the BIOS does not exist.  If you know the latest BIOS for your board is e.g. v1.8, SureHands will retrieve it even though there may be such a comment.  That message is part of a prediction feature that tries to determine future BIOS Releases.  If a BIOS version that was predicted by the SureHands feature is not available yet, the tool will tell you if it cannot retrieve the files and ask you to select an earlier version.
    3.4 Geometry Change
    If the tool fails to make your USB storage device bootable then you will need to use this mode. It will make your drive bootable, select it:
    Select your drive then let the tool do it's business.
    Once the process is complete, run the tool again via method 1, 2 or 3, restart your computer and try booting from the USB storage device again.
    NOTE: This method will destroy ALL data on the USB storage device!
    NOTE: This method is available in v1.17 and beyond.
    4. Selecting the USB Flash Drive for preparation
    When you have chosen one of the three methods from the option list and pointed the tool at the corresponding archive, BIOS File or selected the desired BIOS Version from the list in case you chose to use SureHands Live Update, the MSI Forum HQ USB Flashing Tool will prompt you to enter the drive letter of the USB Flash Drive you want to use for flashing:
    Note that certain drive letters are reserved and will therefore not be accepted by the tool (currently A:, B: and C:). If you are sure you have connected an USB Flash Drive to the system that works properly but it does not appear in the table that appears in the DOS box, enter the corresponding drive letter anyway and see if the tool accepts it.  This can happen in rare cases, but it is usually no problem.
    The tool will check the selected drive and will provide you with status messages.  If everything is okay, the message should look like this:
    The tool will attempt to make the device bootable and automatically write all files that are needed for flashing to the drive to prepare it for flashing.  If the procedure was successful, you will get the following message in the DOS box:
    5. BIOS-Settings, Booting & Flashing
    If the Tool has prepared your drive for booting & flashing, no BIOS flash attempt has been made yet. Only the preparation process. In order to initiate the flashing procedure, you have to restart your system and make it boot from the USB Flash drive. Before you move on to do that, enter the BIOS Setup and check a few options:
    5.1. BIOS Settings to Check
    Check USB-related Options in BIOS:
    - USB Controller
    - USB 2.0 Controller
    - USB Legacy Support
    - USB Storage Support
    - Boot from other devices
    - etc.
    Not all of these options may be found in BIOS and the precise name may vary as well.  Just make sure you checked for such options and that they are enabled (if present).
    Another option you should check for is "Boot Sector Protection".  If such an option is present in your BIOS, make sure it is disabled because it may make a BIOS Flash impossible.
    @all Overclockers: In case your system is currently overclocked, make sure you roll back to default clock and voltage settings before you attempt to start the flashing procedure. Otherwise you increase the risk of an unsuccesful flash, and you most probably don't want something like that to happen.
    5.2. Booting from USB Flash Drive
    To boot from your USB drive you can either change the boot sequence in BIOS accordingly or just press F11 during POST* to get access to the BIOS Boot Menu.  From here, you can select you drive directly without having to adjust the boot sequence in BIOS.  Note that your USB Flash Drive may be listed as a hard drive (if you choose that entry you will get another list to choose from).
    * Not all mainboards use F11, for the boot menu. If F11 fails for you, please consult your manual for the correct key.
    Note: If you have problems booting from your drive, look at the FAQ-Section of this guide and see if any of the tips resolve the issue.
    5.3. Flashing Procedure/Running MemTest86+
    As soon as the system boots from the drive, DOS will be loaded and you will be displayed with two options. One option will start MemTest86+, the other will begin the flashing procedure. If no choice is made, MemTest86+ will automatically start.
    The flashing procedure will automatically be initiated from there.  You will see status messages on the screen that will supply you with information and also prompt you for final confirmation for the actual BIOS-Flash.  A backup of you current BIOS will automatically be saved to a file on the drive (backup.bin) before the flashing actually starts.  You do not need to enter any commands in DOS.  All you have to do is acknowledge the information on the screen by pressing a key.
    The flash itself will only take a couple of seconds (20-30s at the most).  If the flashing is successfully completed, shutdown the system and clear CMOS with main A/C power cable removed from PSU.  Read the >>Clear CMOS Guide<< for further information. 
    After clearing CMOS you have completed the BIOS-Flash. 
    Guide created by Jack The Newbie and the forum team

    Version updated to 1.18x:
    * Mode 3 Sure Hands, Live Update:
    - Removed beta BIOS query check[global]
    - Fixed issue K9N2 Diamond unable to be detected as supported unit if onboard is installed BIOS version 2.4,
     add dynamic detection for future versions.
    - Fixed issue 790FX-GD70 unable to be detected as supported unit and add dynamic detection for future versions.
    - Fixed issue 790GX-G65 unable to be detected as supported unit and add dynamic detection for future versions.
    - Add support for 785G-E65, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
    - Add support for 785G-E53, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
    - Add support for 790GX-G65 Winki ED, prediction BIOS range 2.1 - 2.A
    - Fixed issue P7N Diamond unable to be detected as supported unit if onboard BIOS installed is 1.3 and above,
     add dynamic detection for future versions.
    - Add support for K9A2 Neo2, prediction BIOS range 7.4 - 7.D
    - Add support for 790XT-G45, prediction BIOS range 2.2 - 2.B
    - Add support for 770T-C45, prediction BIOS range 8.4 - 8.D
    - Add support for 770T-C35, prediction BIOS range 8.4 - 8.D
    - Fixed issue K9A2 Platinum[V1,V2] unable to be detected as supported unit if onboard BIOS installed is 1.9,
     add dynamic detection for future versions, prediction BIOS range extended to 1.F0
    - 790GX-G65 board prediction BIOS range extended to ver: 1.D0
    - 790GX-G65 board update bios base ver from 1.xx to 4.xx [following new msi rule for this board jumping from 1.xx to 4.xx]
    - Add support for 770-C35|C45 boards [p1] BIOS range 1.40 - 1.D0
    - Add support for 770-G45 board [p2] BIOS range A10 - AA0
    * Add "Exit" option to navigation screen
    * Update version info related to boot part
    * Update boot part to handle newest features
    * Modify Self update sequence of Installer version
    * Update internal version check ID
    * Mode 4 minor update
    * Build and add new Tool's module for newest features
    * W32 Tool's exit time part decreased by 10 seconds
    * On received OS reboot user request, time delay before execution decreased by 15 seconds
    * Update EC decoder
    * Update start-up information screen
    * Auto store start-up detected information to user's desktop ==> [MSIHQ_INFO.TXT]
    Details:
    Easy to show machine information on request, instead write down from the screen manually, now just copy/paste can be used from MSIHQ_INFO.TXT
    User can check and compare information before and after the BIOS update
    Also usefull if didn't remember what was his original BIOS or EC versions before the update, Tool will auto store it there.
    And easy can be checked if needs. E.g Tool's log file of each Tool's execution, each report will include date and time as well.
    F.A.Q example:
    Q: I flashed BIOS on my notebook and now it doesn't work properly.. And i don't remember what was my old BIOS version.. What can i do?
    A: Take a look in MSIHQ_INFO.TXT at your desktop, there is auto recorded your detailed information about your notebook before the BIOS update.
    So you can easy find what was your original BIOS & EC versions.
    Is it OEM one or not, and the exact original BIOS & EC versions.
    So you can roll back easy or if crossflashing were done to reflash to correct versions.
    Example question:[this board now use 4.xx bios, but don't have time to make a new images.]
    It's just example, do not mean that this BIOS used in the example is bad. But generally often can need to roll back to older version.
    Or to use Sure Hands because[The BIOS is N/A for manual download, By SureHands no need to browse/search/download and point to the BIOS version, also eliminate any chances to pickup the wrong BIOS, and not at last its more quickly[save a time]]
    Q: I flashed my BIOS via MSI Live Update, but the new BIOS has an issues.
        How i can roll back to my old BIOS version?
        The MSI LiveUpdate can only update to the latest BIOS version, which is not good for me.
        And i can't download my old BIOS version manually... Because "This BIOS can only update via Live Update function"
        http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1739
        How i can re-flash to my original BIOS version and from where can i get it?
    A: Run >>Use the MSI HQ Forum USB flasher<<,
    then choose Mode 3 [Live Update{aka SureHands}]:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:09:45,15
    Mainboard:  790GX-G65 (MS-7576)       
    PCB Version:  1.0
    BIOS Version: V1.3
    BIOS Date:  05/08/2009
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:22:38,42
    Mainboard:  790GX-G65 (MS-7576)       
    PCB Version:  1.0
    BIOS Version: V1.6
    BIOS Date:  11/30/2009
    Then choose your old BIOS version from the list:
    The followed image used below is a sample from Eclipse board,[no time to make accurate image] but will look similar for others boards too:
    In a list will be noticed that there is a future BIOS versions.
    Some of them will be not released yet. If you pick some of those the Tool will note you:
    It's a part of Tool's BIOS prediction system called "Crystal Ball", when MSI release a future BIOSes for your board,
    Tool can find them immediately. By that way the Tool no need to be updated to be actual in each moment
    * Add new feature "True BIOS Version Ready"
    - Updated Mode 1
    - Updated Mode 2
    - Updated Mode 3
    Details:
    Q: What "True BIOS Version Ready" means? Does the Tool show the wrong BIOS version until now? 
    A: Of course not, the Tool always show accurate info.
    The same as CPU-Z/Everest of whatever other Tool.
    However Tool also detect EC-FW versions for notebooks:
    The "True BIOS Version Ready" Tool's feature is aimed to eliminate user's mass confusion about MSI BIOS versions.
    And not only users are confused, but MSI's Live Update is confused too... which confuse users even more..
    Few typical real examples of confusion:
    "K9A2 CF wont flash to Bios v. 1.A !!!" 
    Quote from: Fingon on 25-October-09, 16:53:15
    Hi MSI,
    I have a problem. I have bought a new processor: AMD Phenom II x545. I looked on the support page of my MB (MSI K9A2 CF) and there the CPU is supported from the bios version 1.A. So I wanted to flash the Bios the the newest version (1.A). I used the MSI live update 4 program to flash it via windows mode. But everytime it boots it writes "CMOS checksum BAD", then I hit F1 to Bios and I see the version of my BIOS fell to the oldest version 1.1. Then I tried to flash it thru Flash disc (with boot files) and dos mod. The result is the same. I can flash my MB to version 1.8 but when I try the 1.A it wont flash it and my Bios fell to the oldest version (1.1). I realised that the exe files in version 1.1-1.8 are the same (afud412.exe) but the exe file in 1.A is different (afud4310.exe).
    My questions are:
    1) How to flash my MB to the version 1.A ?
    2) Is version 1.A really needed for AMD Phenom II x545? I guess yes, because CPU was avaible in July 2009 and the bios 1.A went out in June 2009. I am able to flash it only to version 1.8 (december 2008).
    Thank you for any help!!
    EDIT: After reading this topic: https://forum-en.msi.com/index.php?topic=129204.0 I realised I have the VERSION 1 of this board (I purchased it right after the launch of the MB (November 2007). It means it doesnt support CPU over 95W, but my Phenpom II x545 has only 80W. I still cant update Bios to the 1.A version.
    So my third question is:
    3) Is the Bios update 1.A only for version 2 of this MB?
    Thx for replies!
    Quote from: Jack t.N. on 25-October-09, 17:16:16
    A CMOS Checksum error is normal and expected after a BIOS Flash and/or a CMOS Clear.  The fact that this message appears, shows, that there was actually something programmed to the chip.
    If you haven't done that yet, please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup.
    The BIOS Version should be shown on the POST Status Screen and there should be a date behind it.  Please check the BIOS Date and write it down:
    Are you absolutely and entirely sure that what you see is "1.1" and not "1.10"?  Because v1.A0 is actually just the hexadecimal notation for v1."10" (one dot ten).  The hexadecimal notation is only used in the BIOS File Ending.  Once flashed, the BIOS will not identify itself in hexadecimal notation but in decimal code (which means you will never see "v1.A0" after the flash but "v1.10" instead.
    Here is a piece of well-meant advice for now and the future:  MSI Live Update should be avoided under all circumstances when it comes to BIOS Updates and/or information retrieval regarding your current BIOS Version.  Why?  Because this tool is stupid and one of there most risky applications for performing a BIOS Flash.  Please uninstall it completely.
    Why do I call it stupid?  I call it stupid because it does not differentiate between hexadecimal notation and decimal notation.  It will show you that "v1.A0" is available.  The it will flash it, if you allow it to do so.  Of course, a v1.A0 Version will always come out as "v1.10" (one dot ten).  When you re-run MSI Live Update it will not recognize that v1.A0=v1.10 and tell you again that there is a newer version available (1.A0, which, again, is the same as v1.10, which was just properly flashed).
    I believe that the update went just fine, that you are currently using v1.A0=v1.10 and that MSI Live Update is actually just creating a pseudo-problem which is currently confusing you.  The pseudo-problem will immediately be out of the world, if you uninstall MSI Live Update and rely on the BIOS ID String as it appears on the POST Status Screen (this includes the date shown there).
    If a BIOS Update should ever be necessary again, please make sure that you won't use MSI Live Update but >>Use the MSI HQ Forum USB flasher<< instead.
    Quote from: Fingon on 25-October-09, 18:03:44
    Thank you for the quick reply!!
    Thats exactly what I have JUST found in this post by Svet: https://forum-en.msi.com/index.php?topic=127672.msg974800#msg974800
    Yes it is 1.10 of course!! I didnt know that 1.10 = 1.A0 ! Thank you for the reply. Then the MSI live update 4 program is dump that he wanted from me another update of Bios.
    So thank you! Problem is solved. 
    Edit: Yes, because of MSI live update I learned how to flash bios via flash disc. :-) But I was still confused by that 1.10 and of course by program saying me I should update again.. :-P
    Quote from: Lostsoul777 on 14-August-09, 05:46:25
    I had the same problem with 1.90 bios, so i updated to 1A, i just want to know why Bios Version says: v.1.10 instead v.1A?
    Quote from: LinuxGuy on 29-December-09, 01:17:45
    My computer does not have a floppy drive.  How do I update the BIOS?  (I tried the online utility 3 times.  It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.  So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).  So either the BIOS is getting updated, but the online tool is not recognizing this or it's not getting updated.  Either way, I would like to manually flash it in DOS.  Is it safe to burn the setup files to CD and boot from CD into DOS?
    That's the same BIOS version... Just the "MSI Live Updater" is not very smart...
    H.A=H.10=17.A=17.10 [A=10, H=17], the last "0" suffix in H.A0 means its official version.
    Quote
    I tried the online utility 3 times.  It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.
    So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).
    So ignore this MSI Live Updater's no sense, and stop flashing your BIOS. You already have the latest version installed.
    The Tool now will detect and shows BIOS versions alias when the MSI BIOS version is known with more than one name.
    So no more flashing and flashing and flashing to the same version because of MSI LiveUpdate suggest again BIOS update...
    Also no more confusion:
    "What's my BIOS version?" -> I flashed my BIOS to 1.A0 [A7520IMS.1A0], but BIOS says its 1.10
    And MSI Live Update also says that i have 1.10 and 1.A0 is available and i should update it. I flashed it again, but its still 1.10?
    What's going on?
    Just run the MSIHQ USB Flash Tool and will show you all that you need to know
    Examples[with real/accurate info]:
    MSI Eclipse:
    BIOS version 1.9:
    BIOS version 1.10:[Tool now shows both BIOS versions alias]
    Report stored respective in MSIHQ_INFO.TXT at user's desktop:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:30:55,34
    Mainboard:  Eclipse SLI (MS-7520)
    PCB Version:  1.0
    BIOS Version: V1.9
    BIOS Date:  09/22/2009
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:37:25,66
    Mainboard:  Eclipse SLI (MS-7520)
    PCB Version:  1.0
    BIOS Version: V1.A (aka Version: V1.10)
    BIOS Date:  10/27/2009
    More examples =>K9N6SGM-V / K9N6PGM-FI / K9N6PGM-F :
    More examples =>945GCM5-F V2 (FSB 1333) :
    Report stored respective in MSIHQ_INFO.TXT at user's desktop:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:47:34,35
    Mainboard:  MS-7267
    PCB Version:  4.0
    BIOS Version: VH.9 (aka Version: V17.9)
    BIOS Date:  11/20/2008
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:52:46,26
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VH.A (aka Version: V17.10)
    BIOS Date:  06/02/2009
    More examples =>780GT-E63 [N/A at MSI web yet] :
    For MSI Notebooks such decoding isn't need, examples:
    * Add new feature "Triple BIOS flash Recovery Ready"
    - Updated Mode 1
    - Updated Mode 2
    - Updated Mode 3
    Details:
    The feature include 3 auto prepared BIOS backups for followed purpose:
    * Internal BIOS recovery:
     - In a failure case Tool perform auto flash recovery [3 attempts, check for success after each and stop flashing if successful] before give control to BK_IO2, notice users about results and give control for manual attempts[if need]. [This a case if system isn't lockup/reboot, if bad flash occur]
     - This mode also have own store up to 5 backups[+1, the last saved copy is always backup.bin, if there was older one they become backup1.bin .. till 5]
    * BIOS backup stored as AMIBOOT.ROM [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
    * BIOS backup detected and stored for M-Flash style boot/recovery [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
    Performing test simulations with random generated BIOS versions[including betas] for M-Flash boot/recovery style, some examples:
    Copy/paste Tool log file:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:00:53,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VD.XB2 (aka Version: V13.33B2)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created  ==> A7267IMS.DX2 
    Where:
    * V13.33B2 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VD.XB2 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.DX2 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:12:23,95
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VK.VB7 (aka Version: V20.31B7)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.KV7 
    Where:
    * V20.31B7 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VK.VB7 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.KV7 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:18:34,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V3.9
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.390 
    Where:
    * V3.9 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
    * A7267IMS.390 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:22:24,04
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V8.1B9
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.819 
    Where:
    * V8.1B9==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
    * A7267IMS.819  ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:25:38,51
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V4.E (aka Version: V4.14)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.4E0 
    Where:
    * V4.14 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V4.E ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.4E0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:28:16,62
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V1.BB1 (aka Version: V1.11B1)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.1B1 
    Where:
    * V1.11B1 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V1.BB1 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.1B1 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:31:57,78
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VI.FB5 (aka Version: V18.15B5)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.IF5 
    Where:
    * V18.15B5 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VI.FB5 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.IF5 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:36:02,40
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V7.O (aka Version: V7.24)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.7O0 
    Where:
    * V7.24 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V7.O ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.7O0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:39:11,84
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VC.8B6 (aka Version: V12.8B6)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.C86 
    Where:
    * V12.8B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VC.8B6 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.C86 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:49:38,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VG.PB6 (aka Version: V16.25B6)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.GP6 
    Where:
    * V16.25B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VG.PB6 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.GP6 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:53:17,26
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VU.H (aka Version: V30.17)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.UH0 
    Where:
    * V30.17 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VU.H ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.UH0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]

  • MSI x48c platinum bios? ram? problem

    I bought myself the following system (all brand new/ 1 month old):
    mobo:
    MSI x48c platinum
    other random information on motherboard -
    T6308P 0801CD TAIWAN 2UG4099621
    MS 7353 Ver: 3.0
    Fintek F71882FG
    G809CAB
    FL 1926.1
    Ram:
    Transcend 1 GB DDR3 1333 DIMM CC9 233207-0139 RoHS [3Q] x1
    Trancend 1 GB DDR3 1333 DIMM CC9 232444-0190 RoHs [7W] x1
    PSU
    mega 600watt
    CPU:
    Intel Core 2 Duo E8500 3.16Ghz FSB1333
    GFX:
    Asus HD4870DK 1GB
    problem:
    sometimes it does not boot at all, it just starts up and no screen displays, then after 5 seconds it shuts down and starts up again.
    when this happens I power down the pc and push the reset button on the back of the motherboard.
    It then starts up and there is display on the screen but then it gives the message: CMOS Settings Wrong, CMOS Date/Time Not Set, Press F1 to Run Setup Press F2 to load default values and continue
    When I press F2 it boots into windows and the cpu runs fullspeed but the time is wrong and when I shut down again it starts up with no screen display and shuts down in 5 secs and follow the same process.
    I have updated my bios to v7.3 since I did read through the forum and saw that there were other people that had almost the same problem like me, but I did it through Windows Live Update, and now everytime I do a bios update through live update it says that there is a newer version available (7.30), but I allready flashed it before with the same version it found on the update.
    is there any settings that would help to stable my system with my current components or is something else the matter?
    I have tried changing settings myself in the bios but everytime I do change something it does not work at all or the cpu runs at half speed in windows (1.58GHz)
    Thanks in advance

    CPU-Z 1.49 report file
    Processor(s)   
    Number of processors   1
    Number of cores   2 per processor
    Number of threads   2 per processor
    Name   Intel Core 2 Duo E8500
    Code Name   Wolfdale
    Specification   Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz
    Package   Socket 775 LGA
    Family/Model/Stepping   6.7.A
    Extended Family/Model   6.17
    Core Stepping   E0
    Technology   45 nm
    Core Speed   1995.2 MHz
    Multiplier x Bus speed   6.0 x 332.5 MHz
    Rated Bus speed   1330.1 MHz
    Stock frequency   3166 MHz
    Instruction sets   MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
    L1 Data cache (per processor)   2 x 32 KBytes, 8-way set associative, 64-byte line size
    L1 Instruction cache (per processor)   2 x 32 KBytes, 8-way set associative, 64-byte line size
    L2 cache (per processor)   6144 KBytes, 24-way set associative, 64-byte line size
    Chipset & Memory   
    Northbridge   Intel X48 rev. 01
    Southbridge   Intel 82801IR (ICH9R) rev. 02
    Graphic Interface   PCI-Express
    PCI-E Link Width   x16
    PCI-E Max Link Width   x16
    Memory Type   DDR3
    Memory Size   1024 MBytes
    Memory Frequency   665.1 MHz (1:2)
    CAS# Latency (tCL)   9.0 clocks
    RAS# to CAS# (tRCD)   9 clocks
    RAS# Precharge (tRP)   9 clocks
    Cycle Time (tRAS)   24 clocks
    Command Rate (CR)   1T
    System   
    System Manufacturer   MICRO-STAR INTERNATIONAL CO.,LTD
    System Name   MS-7353
    System S/N   To Be Filled By O.E.M.
    Mainboard Vendor   MICRO-STAR INTERNATIONAL CO.,LTD
    Mainboard Model   MS-7353
    BIOS Vendor   American Megatrends Inc.
    BIOS Version   V7.3
    BIOS Date   11/06/2008
    Memory SPD   
    Module 1   DDR3, PC3-10700H (667 MHz), 1024 MBytes, Transcend Information

Maybe you are looking for