MSI NX6600GT-VTD128 & MSI "3D! Turbo Experience"
Hi,
yesterday I bought a MSI NX6600GT-VTD128. The card is running fine. I also installed the MSI tool "3D! Turbo Experience". However, the tool does not show any relevant information: no voltage, no memory clock, no fan speed...
Hi,
As most will probably agree, 3D turbo is not a very useful piece of software. Your best bet is not to use it. There are lots of 6600GT posts here that address the monitoring issues of that card.
For memory clock and OC'ing you can use the coolbit reg update. You can find a good write-up in the stickies at the top of the forum.
Good Luck,
Similar Messages
-
Is MSI 3d Turbo Experience able to work on Windows XP and also is it able to work with Geforce FX 5600TD 256MB?
It appears my suspicions were partly correct.
Evidently there are versions of the GF4 that do not support Hardware Monitoring. If you find any discrepancies, please notify me by PM.
A little birdy told me:
List of VGA cards that support Hardware Monitor
Blank means Not Supported
Website already modified
Ti4600-TD8X (MS-8900)
Ti4800SE-TD8X (MS-8900) Supported
Ti4800SE-VTD8X (MS-8900) Supported
Ti4200-TD8X (MS-8894) Supported
Ti4200-TD8X64 (MS-8894) Supported
Ti4200-VTD8X (MS-8894) Supported
MX440-TD8X (MS-8888)
MX440-T8X (MS-8890)
MX440-VTD8X (MS-8888) Supported
G4Ti4600-VTD (MS-8872)
G4Ti4400-VTD (MS-8871)
G4Ti4200-TD (MS-8870)
G4Ti4200-TD64 (MS-8870)
G4Ti4200-VTD64 (MS-8870)
G4Ti4200-VTP (MS-8886)
G4MX460-VTP (MS-8867) Supported
G4MX440-T.(MS-8866) Supported
G4MX440-P(MS-8866) Supported
G4MX440-VTP(MS-8866) Supported
MX440SE-T(MS-8878)
MX440SES-T(MS-8873)
G4MX420D-T(MS-8878) -
MSI 3D TURBO EXPERIENCE Doesn't Work
I was told that I could read my GPU tempertures with this program that I got with my MSI Geforce 4 4400. I installed the program but the window closes after about two seconds and it says that the temperature is 0. Anybody with this program know how to fix this? Thanks.
It appears my suspicions were partly correct.
Evidently there are versions of the GF4 that do not support Hardware Monitoring. If you find any discrepancies, please notify me by PM.
A little birdy told me:
List of VGA cards that support Hardware Monitor
Blank means Not Supported
Website already modified
Ti4600-TD8X (MS-8900)
Ti4800SE-TD8X (MS-8900) Supported
Ti4800SE-VTD8X (MS-8900) Supported
Ti4200-TD8X (MS-8894) Supported
Ti4200-TD8X64 (MS-8894) Supported
Ti4200-VTD8X (MS-8894) Supported
MX440-TD8X (MS-8888)
MX440-T8X (MS-8890)
MX440-VTD8X (MS-8888) Supported
G4Ti4600-VTD (MS-8872)
G4Ti4400-VTD (MS-8871)
G4Ti4200-TD (MS-8870)
G4Ti4200-TD64 (MS-8870)
G4Ti4200-VTD64 (MS-8870)
G4Ti4200-VTP (MS-8886)
G4MX460-VTP (MS-8867) Supported
G4MX440-T.(MS-8866) Supported
G4MX440-P(MS-8866) Supported
G4MX440-VTP(MS-8866) Supported
MX440SE-T(MS-8878)
MX440SES-T(MS-8873)
G4MX420D-T(MS-8878) -
G4MX 440-T 3d turbo experience warnings!!!
i have bought a msi mx 440-t card. i have a asus cusl2-c motherboard with a pentium 3 processor. whenever i install the msi 3d turbo experience the msi live monitor gives me warning messages that "core temperature is unusual. it is now 3.06 volt." or "memory i/o voltage is unusual. it is 2.68 volt." but when i open the flah program the bars in a green region indicate voltages around 2.54 and 2.56 volts. my local dealer says that it is nothing and i should uninstall the software. is he correct or my card is malfuctioning. is the card getting heated and will be damaged or is it nothing to be afraid of?
FOR ONE THING ,try to delete the shortcut for 3 dturbo experiance.exe,and goto were you installed it,use the 3 dturbo.exe instead, you will find it in c:Program Files/msi/3dturbo,if you did a standard install.i see your board suports 4x agp,,,,,,3.0 volts is indicative of 2x agp,but it looks like you have your bios set to 4x right?
do you have the latest bios???? ?(
go here http://www.asus.com.tw/support/download/item.aspx?ModelName=CUSL2-C
-
i have bought a msi g4mx 440-t card. i have installed the card carefully and checked the slotting repeatedly.
i have a asus cusl2-c motherboard and pentium 3 800 mhz processor and 256 mb sd ram. now when i install msi 3d turbo experience it shows me messesges from time to time like "core voltage is high 3.06 volt" or "i/o voltage is high 2.68 volt" etc . should i be alarmed or is it just a bluff by the software. also i got a score of 3737
in 3d mark 2001. is it ok for my machine. please let me know. thank youthanks, I noticed that you have 305/660 next to your graphics card, is that your core clock and memory clock speeds, and if that's so do you have any special cooling to accomplish that, im always scared to over clock not to explode a 200 dollar graphics card or processer heh. know of any good sites that will help me with some information on over clocking msi cards and that such. Thanks again for your help Denis )
-
URGENT HELP: PC can't post after Bios Update on MSI NX6600GT-VTD128
The LiveBIOS utility on my PC showed that there was an updated BIOS of my MSI NX6600GT-VTD128 that I was using and I proceeded to update using the facility.
Everything seem fine until the system was rebooted, now the system refuse to post. All I see when I power on the system is a moment of power (e.g. I can see the lights on my keyboard and card reader), before they also disappear.
My system is a P4 2.4 Northwood running on a MSI 875P. I had already cleared the CMOS on my motherboard but it didn't help. I would appreciate greatly for any advice.Quote from: Glenn on 24-September-06, 14:26:51
Common mistake.
Unfortunately, the cure is likely to be painful.
Did you disable your Antivirus and Firwall before doing such a thing?
Video cards aren't like motherboards, and just updating for the simple fact that it's available is wrong regarding BIOS's for anything.
You should have a specific reason to do so.
Now, did you backup your old BIOS?
You may need to contact MSI directly to get the original BIOS and use a PCI video card so you can boot and see what you are doing to reflash your AGP card.
How to contact MSI.
Thanks for the advice. And you are right, the cure is painful, particularly, when I didn't back up the old BIOS and neither do I have a PCI graphics card lying around.
I did deactivated my antivirus whilst flashing, and there was no firewall running. -
Compatibility between MSI NX6600GT-VTD128 and motherboard
Hi guys, I want to know if there's compatibility between my motherboard "MSI 875P Neo-FIS2R AGP8X" and the "MSI NX6600GT-VTD128" because I want to buy this Video Card but my doubt is about the compatibility or maybe some errors, and I have a 400W Power Supply.. that's ok for this video card?... thnx !!!
hi, how are you.
wel there are no cmpatibility issue with this motherboard and the video card... or i am not notify about...
but do you have to give "us" (all posiblle reply) more info about your pc, anyway the only limitation about it's the slot used, that motherboard uses agp8x and you have to buy a 6600vtd agp 8x, because thera are one model pci express that's all
the power issue: not a issue realy 400w power source are just enough
th real monster are hte 6800 family that need 470w or something like that to work fine
ok i hope best to you and your newer card, and tellme how works this magnificent piece of technological art(in middle rank) and the capture feature with onchip video processor
byee!! -
Compatibility ?? MSI NX6600GT-VTD128 with chaintech motherboard ?
hi
i have bought recently this MSI NX6600GT-VTD128 and install it on chaintech 7VIL4 with 512 ddr athlon 2800+ 400W psu and cant start the pc black screen no boot only fan working.... so my seller told me that maybe it is not compatible wat do you think about this ???
thanks for helping i try everything except install it on other pc
byeJust because yours has more watts doesn't mean it is more powerful.
Check out this topic https://forum-en.msi.com/index.php?topic=76923.0
Also please post the max amps for your powersupply on the 3.3v 5v and 12v rails. This info can be found on a sticker on the side of the PSU.
Good Luck
Jeremy -
Msi FX5600 VTDR128 + 3D!Turbo Experience Temperature issue
I bought a MSI FX5600 VTDR128 board, to use on a Abit VP6 board - 2x PIII 933@133 FSB, 512 MB SDRAM 133 CL3, PSU AOPEN 300 W - installed MSI/Nvidia drivers 44.03 and 3D!Turbo Experience, first the one that came with the drivers and utilities CD, this one reporting erroneous memory and GPU speed (100 MHz and 54 MHz respectively). After that, downloaded and installed latest version of 3D!Turbo Experience, claiming support for FX boards. This new software reported correctly the core and memory speeds on 2D mode 270/550 MHz, but on 3D mode 270/550 MHz keeps reporting 270/550 MHZ. The temperature and fan values only appeared the first time I ran the program, never showing up in the subsequent runs. The values for Fan/Temp were: 48 ºC/2700 RPM (ambient temp +/- 27 ºC) after playing GTA Vice City for 30 min, with the game still running. After playing GTA Vice City for 1 hour, one sistem notification box (not from the HTML/Flash frontend) appeared notifying for unusual temperature - 255 ºC 8o . On the previous version of 3D!Turbo Experience a similar box showed up with 127 ºC. In either situations the HTML frontend kept reporting absolutely normal values (48 ºC/2700 RPM). The board is warm to touch (+/- 40 ºC), both the heatsink and the PCB. I find this very strange and i'm not sure if the notification box temp. value is correct - are 127 º C the upper limit of the temp. range (127=(2^7)-1) on the previous software version and 255 (255=(2^8)-1) on the latest software version ?
The board does not crash when the box appears and keeps running steady as a rock, altough after that i closed the game for protection.
Anyway, I am terribly scared, considering those temperature values may represent a terrible overheating situation. Please HELP!!! . Thanks for your consideration.
Regards.More problems playing 3D Games:
3D Turbo XP stops reading Fan and Temperature after playing for 20 min. The alarm starts sounding and voltages climb real high: GPU:3.060, Memory I/O:3.060, Memory Core:6.120.
Idle (2D) Voltage Readings - GPU:1.310-1.320, Memory I/O:2.560-2.570, Memory Core:2.540-2.570.
My Power Supply Unit is an AOPEN 300W.
What should I do? Maybe returning back to the dealer and activate the warranty?
System:
Aopen Big Tower ATX/Aopen PSU 300W
Abit VP6+2xPIII 933MHZ@133 MHZ
512 MB SDRAM CL3 OEM
MSI FX 5600 VTDR 128
Maxtor Diamond Max 9 80 GB HD
Ibm Deskstar 60 GXP 40 GB HD
DVD-ROM Pioneer 16X
CD-RW HP 10X/4X/32X
Hercules Game Theater XP 5.1 Sound Card
LAN Adapter Dlink DFE 530-TX 10/100 Mb/S
Modem Diamond/Supra 56k Pro
Win XP Pro SP1 -
hello i've problem with instaling usb controler on my msi k7t turbo limited edition and win Xp .
system recognize usb controler but there is a message -- " There is a failure during instaling usb controler , abnormal data "
what should I do ?Hi,
I have not seen this problem before....
Did you install extra USB controllers or are we talking about the on-board controllers??? -
MSI K7T Turbo Limited Ed. + XP1700+
Hi
I would like to know if my mainboard (MSI K7T Turbo Limited Edition on KT133A) supports XP1700+ 0,13 processor?
I've already read on this site that it doesn't :( but from the other hand I've heard that some people have those Xp1700+ on the same boards and everythings works fine (with bios ver. 3.6).
So...will it work or not? XP1700+ 0,18 works perfect.
RegardsHi, it may work but there is no official support for it.
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=25&NAME=MS-6330%20Ver3.0 -
Hi, i got this laptop and i have it for one month now, i i do not really know how the turbo button works.
When does it put on (blue)?
Why does it put on?
Can i put it on manually, can i put it off manually?
Really what is its job?
thanks!The MSI GE60 Turbo button has only one function: to open a favorite program chosen by you. You will need to have SCM or S-Bar installed to be able to use this.
The MSI GE60 Turbo button light has a different function. If it illuminates, it will indicate that the GTX660M, this is the powerful discrete graphics card, has taken over for an application or game. -
Calling All NX6600GT-VTD128 AGP Users -- Post your temperature readings
Hi to all MSI NX6600GT-VTD128 AGP Users,
I've recently purchased a NX6600GT-VTD128 AGP card and have done some testing for a few days now. I read about the BIOS temperature modification and got it done with my card. To my surprise, the temperature reading is way above most of the temperature reading i see from you guys here. Here is my temperature reading :
Idle : ~70C
Load : ~90C
so far, i've only seen 1 or 2 users with the same overheating problem and i couldn't figure out what is wrong with my card. i can run 3dmark, games and everything else i throw at it without any system instability, but the temperature reading is making me nervous. 90C at full load is way too high and not acceptable. i've changed the thermal compound to ArticSilver Ceramique, tighten the screws to make sure the GPU Core and the HSF are making good contact. In fact, i did all that twice to make sure i get everything right. Other components on the board, including the PCB are equaly hot during full load. In fact, during full load, the heat is so intense that i couldn't put my fingers on the PCB or the HSF for more than 1 sec without getting my fingers burnt.
Problems i've given thoughts about are
1. bad contact between the GPU core and the HSF
2. faulty built-in temperature
As for problem 1, like i've mentioned above, i've double checked and reapply ArticSilver on the GPU and RAM chips. Just to be sure, the HSF itself is really hot during full load and quite warm during idle (tested using my fingers . so that means the heat is being transfered to the HSF correctly. (correct me if i'm wrong). As for problem 2, i couldnt tell because i don't have any reference tempearture monitoring device to compare the readings.
Im new to this card so i'm really hoping that more experience users will post something here, including your temperature reading for this card, to help me address this issue. If possible, I don't wish to change the onboard HSF. I'm using a 450Watt power supply. Please advice. thanks in advance.I have two AGP MSI 6600GT's.
1) Idles 46, load around 62
2) Idles 52, load around 68
Both heatsinks were removed and Arctic Silver Ceramique added. Number 2 above is actually in a colder section of the house, yet has higher idle and load temp. I think the sensors are fairly accurate, but not if you have a faulty one which might be the case.
I suggest you get one of these which I use with one of my 6600GT's. http://www.bestbyteinc.com/prodinfo.asp?number=SEN-CNU-001
It's accurate to within 1C. It is being used with card #1 above, at 46C idle the display is showing around 36 which makes perfect sense because the internal temperature can be higher by around 10-15C or even more.
If you suspect bad contact with the heatsink. Turn the lights down low, and shine a flashlight at the edge of the card. Look at the space between the heatsink and the GPU from the opposite side of the flashlight. If it's not making good contact you should see light between the heatsink and GPU. Another thing you can try is take the heatsink off and clean off all the compound. Put a piece of newspaper between the GPU and heatsink with no thermal compound. See if you can pull out the newspaper with no resistance. If you can't it's making contact. Make sure to re-apply thermal compound before using the card. -
[GeForce 6] Big Problems with NX6600GT VTD128 AGP and Video Overlay
Got trouble to Install the NX6600GT VTD128 AGP VGA-Adapter right.
I already tried out with latest Drivers from MSI 71.22 and the ForceWare 66.93 NVidiadrivers, but no Overlay at all in my Grabbing Software.
It's a DV-Storm of Canopus with Storm Edit installed. With my Ti4200 (also MSI VGA-Card) never had those Problems.
In the Canopus Storm-Edit Software is an Preview-Window to check the grabbing Process. Now, with the new 6600GT Card it's a black screen.
When I press any key, shortly I see a TV Picture. It's an Overlay Problem of the 6600GT.
How do I have to install/configure the 6600GT VGA that Overlay is working fine.
The System:
Intel P4 HT 3,2 GHz
ASUS P4P800 with AGP 8x
DV-Storm in PCI Slot 2
IDE Raid Promise Fasttrack 100
1024 MB DDR400 Corsair CL2
Latency Timer on 128 (doesn't work with PCI Latency Timer = 64 too)
DirectX 9.0c, XP with SP2 and latest Patches, MSI-Driver Version 71.22 (or Reference Driver 66.93 NVidia)
This Configuration is working fine (Overlay = OK) when re-install the GeForce4 Ti4200 of MSI
>>>Problem solved<<<
.....a wonderful Canopus Patch to "clean" the ForceWare Drivers like a big LIGHT in the Nvidia-DARKNESS gives hope and wellness to my PCI found the solution while I cruised in the forum, I used Driver Cleaner to erase the driver file on my HD, and the installation worked perfectly... Sorry about my useless post
If it can help another one... -
Where is the program 3D Turbo Experience?
sorry for my english, i don't speak much
i have the msi fx5600VTDR128 and i saw in a page that in one of the cds comes a software hardware monitor for the temperature and voltages but i dont found it and how iis it name
thak uThe little proggy he is asking about is 3D Turbo
Heres a link to the main page for all the utilities http://www.msi.com.tw/program/support/software/swr/spt_swr_list.php?kind=2
Here is the mirror to the utility: 3D Turbo Experience *Click on the blue underlined link to begin the download*
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
background=/images/page/download/mb/mb_utilitydetail_topicbg.gif
bgColor=#ececec height=25> src="http://www.msi.com.tw/images/page/download/mb/mb_utilitydetail_topic.gif"
width=29 align=absMiddle> href="http://www.msi.com.tw/program/support/software/swr/spt_swr_list.php?kind=2#"> face="Arial, Helvetica, sans-serif" color=#333333 size=2> href="http://download.msi.com.tw/support/swr_exe/3D50.exe">3D! Turbo
Experience
background=/images/page/download/mb/mb_utilitydetail_topicbg.gif
bgColor=#ececec>ReleaseDate:
background=/images/page/download/mb/mb_utilitydetail_topicbg.gif
bgColor=#ececec>2003-11-13
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
height=13
src="http://www.msi.com.tw/images/page/download/mb/download_mb_biosdetail_t.gif"
width=7 align=absMiddle> Version
2.15
src="http://www.msi.com.tw/images/page/download/mb/download_mb_biosdetail_t.gif"
width=7 align=absMiddle> Support OS
Windows 98SE/ME/2000/XP
src="http://www.msi.com.tw/images/page/download/mb/download_mb_biosdetail_t.gif"
width=7 align=absMiddle> File size
15.701MB
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
src="http://www.msi.com.tw/images/page/products/mainboard/product_dot1.gif"
width=1>
• New support FX5700
Ultra/FX5700/FX5950 Ultra chipset
• Version:
2.17
Maybe you are looking for
-
No data return from BI7 via MDX drvier in Crystal report
I have: Windows 2000 SP4 SAP BI7 patch level 16 SAP GUI 710 patch level 7 (BW3.5 addon patch 3, BI 710 patch 5) Crystal report XI R2 SP4 SAP_Integration_Kit_XI R2-SP4 and the BW tranports already imported in BI7. I can create a report over a Bex quer
-
Hi, I asked this question several days ago and see that it got about 90 views, but no responses. I don't know if I asked the question improperly, or whether it can't be done, or nobody has a solution. I've asked it again below with a bit more detail.
-
Hi, I have a friend who has lost his iCloud password. We cannot remember the answers to the security questions and we can therefore not retireve an important pages document that is backed up to iCloud. Is there any way to retrieve the password based
-
Setting filename sending output to Excel form servlet
Hi All I am successfully sending my tab separated output to Excel from the servlet using the following: response.setContentType("application/vnd.ms-excel"); response.setHeader("Content-Disposition","inline;filename=statistics.txt"); The output is aut
-
*.eml Time Stamp - Select File in Windows Explorer Changes the Modified Date
The Windows Live Mail *.eml files time stamp is getting changed to the current date when the file is selected in the Windows Explorer! I save backup copies of important E-mails to folders on the Hard Drive and then synchronize them with the same fold