Msi Nx6800 Td128

hi i was going to buye this card but as i hav had problems with the xfx geforce fx5900xt i just wont to make sure it will work in my sytem the system is Abit AN7 Guru nForce2 Ultra 400FSB USB2 A133 SATA Raid 8xAGP DDR400 Dual.AMD Athlon XP3200+ 400FSB 512Cache Barton.512 DDR400 PC3200 ram.500w Psu thank u for eney help or info

Hi Kilner
Quote
I'd also suspect it's going to be at the top of the list for causing you much aggro
For a 500W PSU, it is very low in the 12v. Better spending a bit more of the folding stuff and investing in a better one.
Cheers

Similar Messages

MSI NX6800 TD128 and Garbage Characters

Purchased an NX6800 TD128 on Saturday. Put it in the machine last night and all I get is garbage characters flashing on the screen
The Windows XP logo appears after a few seconds, this time with flashing green lines down the screen. The machine then either hangs with white flashing characters onscreen, or it reboots. If it reboots, same happens again. The spec is ...
Athlon XP2600
1Gb RAM
1 x DVD writer
1 x DVD ROM
2 x 160Gb Western Digital HDD
480w Tangen power supply
I put the old GeForce FX 5200 back in and it all works fine. Any ideas folks? Looks like it's a dead one to me

Hi retro-squirrel
One thing you should know before you post a problem is to give a more precise signature . If you don't give the max amps of your PSU (3.3v/5v/12v), make and type of ram (preferably with lat & cas), most of the moderators won't bother answering. I would imagine they are sick of telling people to make more informative signatures . Here is a link to give you a hand...
Suggestions on posting and getting better answers
This is from GlennVidia who is one of the mods from this area, if you fix up your sig he may be able to steer you in the right direction. He is very knowledgable and extremely helpful . I'll pop back later to see how you are going. Hopefully you don't have to RMA that card of yours.

MSI NX6800-TD128 Vs MSI K7N420Pro

I got myself a new graphics card today.
Unfortunately everything has not gone that well. Once I installed the new graphics card I noticed a distorted image on the BIOS boot up screens:
Some of the characters would blink.
Strange flickering lines (always on the same areas)
Once I booted up Windows I had similar problems with flickering lines and flickering lines of blocks.
I tried installing the drivers but I the computer would black screen and stay there.
Does anyone have any ideas? Incompatibility with the motherboard? Faulty graphics card? Power supply?
Thank you.

Hi guys.
The NX6800-TD128 does not have a particularly big cooler so it fits in perfectly.
There is no cap immediately in contact with the card but I guess they are within ~4mm.
The power cable is inserted into the card.
The monitor cable is fully inserted and I've also tried using the DVI socket with the converter but that gives me the same problem.
I was previously using the onboard video.
I did remove the drivers and run DriverCleaner to remove all traces of the drivers. I don't think it's a driver issue as the problem also occurs on the screens prier to Windows loading. I did read somewhere that the drivers can tell you if your card is not getting enough power so I tried to install the latest WHQL drivers from nVidia's site but unfortunately Windows would black screen and stay there.
I did not add (or remove) anything, including RAM, when I first inserted the card.
I've since removed every PCI card and every drive to limit the power use/conflicts but that has not helped.
Now for the bad news (for me) (I'm worried you guys are going to say that this is the problem and that I'm going to have to go out and spend £50 on a high end PSU):
I've tried two PSUs (they produce slightly different distortions but they both produce them).
Q-Tec
"550W PSU"
+3.3V@20A (Max, (Peak=30A)
+5V@35A (Max, (Peak=40A)
+12V@14A (Max, (Peak=20A)
AOpen
300W PSU
+3.3V@28A
+5V@30A
+12V@15A
(+3.3V&+5V=180W Max)
(+3.3V&+5V&+12v=280W Max)
Best regards guys.

NX6800-TD128 DVI-D problem

Hi !
I am a happy owner of ay MSI NX6800-TD128, which I have a problem with. When I connect it through the normal D-SUB cable (normal vga cable, everything is fine).
BUT when I am trying to connect it with the DVI-D cable, which is the purpose why I had bought it along with the 23 col BENQ LCD, there is no signal.
I had tried to manually change the Input source as well,but no luck.
The solution should be siple, could somebosy help me out please ?
HOW CAN I TURN ON THE THE DVI SIGNAL ?
Many thanks,
Moore

Test 1: Get another LCD monitor with DVI connection and test it on this graphic card.
Test 2: Also, test the card on another monitor with DVI connection that known to work.
If test 1 fails, return the graphic card.
If test 2 fails, return the LCD.

NX6800 TD128 problem

I bought a NX6800 TD128 about 3 weeks ago.
As soon as i had installed it I put doom 3 staight onto my machine, so that I could test how fast it was. But It wasnt great at all first thing what happened, As soon as i had started the game, was that the whole screen divided Up into small black triangles and flickered like mad . this only happenes If I am moving thou. If I don't move my charecter in doom 3 everything is great but If I start to move the whole monitor flickers. This doesn't only happen with Doom 3 but with XIII or Prince of Persia the Sands of Time. But with the latter two games It isn't so bad with PoP It hardly ever happenes (the flimmering) and with XIII It only happenes In outdoor leveles. But doom 3 Is horrible. I have already installed all the newest drivers for the VGA card (forceware61.77) and I've also got the newest ones for my motherboard (asus A7N8X) And I#ve got SP2. I'm not quite sure if my powersupply is good enough thou. It says It has 500watts butt in real life it only has 5v 30A 3,3 28 A an 15v A with 12v But that should do. I can't think thats the problem because I've already tested the Pc with all the extra bits like Cd drives and PCI cards unplugged and the flickering didn't change. what can I do ? Is my VGA card faulty or something ?
please help me
with regards x7aa1186

Quote
Originally posted by x7aa1186
If I would return it do you know if I can send it straight to msi, because I bought the VGA card in the UK and I live in Austria so it's a bit of a strain sending it back to the retailer.
Speak to MSI and ask them the best way to solve this problem.

NX6600GT Vs. NX6800 TD128 AGP 3Dmark05 results

Hi to all,
Can you please help me compare these two cards? How much difference is there between these two:
NX6600GT TD128 and NX6800 TD128 AGP in 3Dmark05?
Anyone tried them in 3ds Max?

I got a 3dmark05 score of 5499
Neo4 Plat
Venice 3000+ @ 2411Mhz (9 x 268)
MSI 6800GTO @ 410 core, 1050 mem
2 x Corsair CMX512 3200XL, dual-channel @ 200Mhz 2,2,2,5 1T

MSI NX6800 PCI-e

I am running a single NX6800 PCI-e SLI card with the below specs on my system. It is woking great and fast and i can get good results on the benchmarks. I am having issues which i suspect are hardware related but may be caused by my drivers when playing any games. All output freezes (video, sound) except network traffic an all input stops respoding. After 20 - 30 seconds of nothing it will resume and quickly catch up to where it should have been after the elapsed time. The occurence of thisis sparatic sometimes once every 30 minutes to and hour sometimes not for 8 hours at a time. I was wondering if anyone had any hints or ideas of what i might do.
Thanks
ITEM SUMMARY:
Asus TV FM Card (NTSC)
Western Digital 250GB Hard Drive JB
Kingston Hyper X DDR 1G Dual Channel Kits (PC3200)
AMD Athlon 64 3200+ 939 Pin
MSI NX6800-TD256E
ANTEC SONATA --- upgraded power supply to 420 watts(wil post brand and spes)
ASUS A8N-SLI Deluxe
SOHW-1633S Black --- Lite On SOHW-1633S 16x

I just installed the new NVIDIA drivers and that seems to only make thiings worse instead of freezing and resuming it is now freezing and beeping once then restarting. I really need to nail whats rong here. Please help
xowainx

Trying to clock MSI FX5900 TD128

First of all: HI! (This is my first post here ) )
I recently got muself a MSI FX5900 TD128. I installed the msi drivers and I saw it is possible to adjust the clock there. It is one (2D) that says 300mhz and one (3D) that says 400mhz. I've tried to adjust the 3D-clock to 450mhz (ultra settings) but when I reboot the pc it is back at 400mhz.
I don't know if I am doing this right and what the difference on 2d and 3d-clock is. Does anybody know?

Hi Metaman,
You are having the same problem that I had with my FX5200 that the settings were not being saved. I do not know why this is.
I downloaded the Geforce tweak utility from http://download.guru3d.com/gtu/ this allows you to change clock settings.
P.S the 300Mhz is memory speed
the 400Mhz is the GPU speed
kind regards

Help Msi FX5600-TD128, CPU 64bit or128bit?

Help for Msi FX5600-TD128,
=====================
CPU 64bit or128bit?
=====================
Products:
Msi FX5600-TD128
p/n 8911-340
Label: 602-8911-340

you seem to have the same model as I do. mine's 64 bit. just count the rams on the board, if the board's all green and it has only 4 rams on it then it's almost certain that it's 64bit. sorry. If you could post what's written in your rams and how many of 'em are in your board maybe I could help you a little more. read your mail :D

MSI - NX6800 GT driver installation problem

Hello,
I've got a tricky problem, i'll try to give as much details as possible, so if i forget something, just ask =)
My Configuration :
Motherboard : Asus A7n8X Deluxe (first version)
CPU : Athlon XP 2400+
RAM : 1.5Gb (DDR Ram)
Graphic Card : MSI - NX6800 GT (256 Mb)
Hard Drives : 80GB(Western Digital) and 250Gb(Hitachi)
Ok, i haven't put too many hardware informations because apparently the problem isnt coming from the hardware side.
First, i've been running with this configuration (just without the second hard drive), for a year and a half, on Windows 2000, and it's been working fairly fine. No problems detected.
i've acquired a second Hard Drive a few weeks ago (the 256 Gb one), so i've decided to put a fresh install of XP on it.
Installed XP without any problems, but it's while installing the drivers that the problem popped up.
I've installed Windows XP Professional on my newly acquired Hard Drive (the 250Gb one), and then tried to reinstall the latest NVidia Drivers for the Geforce.
I've first installed the drivers of the motherboard (1.16 from Asus), then i installed Direct X 9.0c, and i finally installed the latest Nvidia drivers for GFX Cards (91.31).
Unfortunately, right in the middle of the installation of these drivers, the screen switched to black, then went to sleep mode (like if there was no video output). Finally the computer reboots, and i have to use the latest working configuration to be able to go back to Windows XP again.
I've tried with different versions of the drivers for the motherboard and for the Geforce 6800 GT, but still the same problem.
So for now i'm still using only my first Hard Drive with Windows 2000 on it, till we find what to do to solve the problem. (and since it works on Windows 2000, the problem can only be a software one).
Thank you in advance for your help!
PS : Here is the detail of the 1.16 drivers from Asus :
This nForce WinXP driver package contains the below components:
Audio driver 3.14 (WHQL'd)
Audio utilities 3.07
Network driver 2.81 (WHQL'd)
GART driver 2.78 (WHQL'd)
SMBus driver 2.75 (WHQL'd)
Memory controller driver 2.75 (WHQL'd)
IDE driver 2.70 In The Box (WHQL'd)
IDE driver 3.07 Full Driver
Installer 3.11

I've already tried the Vid Card on another comp, and it works without any problems there.
I've been making an hypothesis, though the chance that its coming from that is very slim i think.
A bit more than a year ago, there was a storm(pretty violent and really near my house), and my comp was plugged on (though it was shut down). After that incident, 2 USB slots of my mobo were dead, along with one network card on it. But the rest was working fine. So i've been working if it couldnt have affected a bit the rest. I have no idea how it works whn installing new drivers, about the tests it does with the system and hte hardware. But if it tries to take full power on the vid card, it might be that. I dont know how i could verify that though.

Mega 180 and MSI FX5200-TD128

Hi all and thanks in advance for any help.
I just bought MEGA 180 a some more things, here is my current config:
Box - Mega 180
CPU - Barton 2500+
Memory - 2x256 - 400Mhz from Phoenix Technologies
Disk - 120 Gigs HD - Seagate Ultraquiet
DVD Rom - Leadtek Silent
PVR PCI Card - PVR 350 from Hauppage
Everything works fine.
Now I have an MSI FX5200-TD128 Graphics Card and decided to try it out.
With some difficulty I managed to put it in but now .... the computer simply does not start .. well sort off.
Once I hit the power on button three things can happen:
* Computer starts but the display is not on, and eventually it locks.
* Computer starts with some gittery on the screen and it locks
* Computer starts, I hit the del key but I can't even get into the BIOS.
In either case the OS never boots.
My question is,
* Do I need to set something on the BIOS before I install the card such as, increase the AGP voltage or something like that?
* Can it be that my memory is just BAD for it?
* Can it be that my AGP slot is just BAD?
* Do I need to setup the BIOS prior to the operation?
* Is this just that my MSI card is too power hungry, which I think it strange as it is from MSI, its the latest model of its type?
Please help me, and again thanks in advance.
Nuno
PS: By the way, my BIOS is V3.30 downloaded two days ago from Live Update

Hi,
Managed to get it working. Here is what I did in case anyone has the same problem as mine.
1) Take a memory DIMM out, a let one just stay there. This will get you a memory total of 256 Mgs and your system will now boot.
2) Get to the BIOS settings.
3) Choose the option concerning DIMM's and performance (third option I think).
4) In the third option select Manual. This will allow you to set specific options for the memory.
5) Select Auto in the option concerning CPU / DIMM transfer rating.
6) Select High Performance in the 7th or 8th option concerning your DIMM settings.
7) Save the BIOS
8) Put the DIMM back in
9) Start your system and voila it works.
Best regards,
Nuno

Msi fx5700-td128 vs td128q

Hi!
Whats the diference between a Msi FX5700-TD128 and a Msi FX 5700-TD128q?
Why there's no q-less version in the main products page from Msi but yes in
other like msimiami that is from where i would be getting mine?
Thanks.

Is your card a OEM i.e. the cheaper, no box and/or no software bundle version?

Big MSI RX9800Pro-TD128 problem

Hi everyone!
I am a proud owner of a Radeon 9800Pro (MSI RX9800Pro-TD128) and I've got an issue that looks very much (or exactly) like this:
http://img.photobucket.com/albums/v302/IvanV/shot0000.jpg
If you failed do recognize it, this is a screenshot from 3DMark03 GT4. It happens with all driver versions I tried (from MSI and from ATI). It used to happen only in GT4, so I wasn't to concerned, but now it also happens in HL2 when AA and AF are turned on (which is also strange, because I didn't use 3D Mark with AA and AF). The card is not overheating and works fine in other situations. My system:
CPU: AMD Athlon64 3000+
MB: MSI K8T Neo (VIA K8T800 chipset)
RAM: 512MB DDR 400MHz Kingston ValueRAM etc...
Windows 2000 Professional with SP4, DX 9.0c

Today, after months of having this issue, I solved the problem. Still, I don't understand why this worked, so please someone explain it to me. I found two solutions:
1) Change AGP aperture size to 256MB. Since I have only 512MB of RAM, things got a bit less smooth, so I was thinking, since things did work from time to time, and guided partly by memory and partly by instinct I
2) returned AGP aperture size to 128MB, and removed desktop wallpaper, screensaver, custom Windows appereance in Display Properties and it also worked.
I retested all variations several times to make sure, and right now I have little doubt that this is a permanent solution. I only don't know why, so if anyone could tell me, I'd really appreciate it.

Arctic Cooling NV Silencer 5 on NX6800-TD128?

Will it fit or will i face any problems if i buy that cooler? Any tryed?
If any here got that card and that cooler:
-A lot more quite(probable spelled wrong, but less noise)?
-Got any cooler?
NX6800-TD128
Artcic Cooler NV Silencer 5

this cooler is for NVIDIA Geforce 6800 series, which mean it will fit with NX6800-TD128 without any problem.

Please Help Bios MSI RX9550 TD128

I need the original bios of MSI RX9550 TD128. I found in one page a vga bios for video cards with chipset Ati, but with that bios (RX9550 TD128) windows detect now like a MSI RX9550SE and works like a SE, very very slow =(
Anybody can help me? PLEASEEEEE!!!!!

Bad flash with out backup

Msi Nx6800 Td128

Similar Messages

Maybe you are looking for