MSI NX7600GS-TD512Z and AsRock P4i45d+

Is VGA card MSI NX7600GS-TD512Z compatible with mother board AsRock P4i45d+?

Quote from: mctomas on 08-January-07, 19:00:33
Hi, BOSSKILLER
And thanks for reply.
OK I'll try to ask AsRock. One more question - power supply of my PC is 300 W, so I should also install new one or this can work with NX7600GS-TD512Z card?
think need to be replaced with decent one. single rail if possible with over 20A on +12V.
you can have a read here: https://forum-en.msi.com/index.php?topic=77071.0
good PSU suggestion: https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
Cheap, but good:
https://forum-en.msi.com/index.php?topic=103754.msg762155#msg762155

Similar Messages

MSI NX7600GS-TD512Z To a HDTV (Total noob)

OK let me explain what i know and don't know
I am totally new to this HDTV stuff but my tv died so i am been forced to buy a cheap HDTV( has to cheap to replace it fast for my son). It's a basic 32" with a single HDMI and no PC port and i would assume its a 720p as a minimum.
After reading the forum and the help pages i know i have a yellow DVI port on the GFX card so its got HDTV out support.
My confusion arises as the card says it it HDTV ready. So i have some question i would like to ask so i don't blow up the PC or the TV
1: If its got the yellow port, why is the card HDTV ready?
2: If i am mistake (i am Dyslexic) how do i connect it to the TV?
3: If the card does not do direct HDTV out form the yellow DVI port is there any other way i can safely connect this GFX card to my TV's HDMI port with some third part hardware?
I do hope you can take the time to help out and to explain a little more about how this all works as i am new to this and don't want destroy what i all have. I am buying a 8800 card when i rebuild my pc later in the year but i was hoping i could connect it to my HDTV as i intended to use this pc a complete media center once my new system is built but i didnt really want to use the SVCD to scart and not use the HDTV
Thank you for you time

Thank you forget replying.
In reply to your audio comment this is solved by me using the sound card in the PC is linked up to my Hi-Fi so audio not a problem.
The TV i have order is a Samsung 32" LE32M87BDX/XEU HD
# LCD 100 Hz picture
# Screen resolution 1366 x 768
# 3 x HDMI connections (2 rear and 1 side)
# HDMI version 1.2
# HDMI CEC Technology
# SVideo input
# RF in
# Component in
# 2 x scart connections
# PC in DSub
as i would idealy like to DV-I to HDMI would i still be able to stream through the pc connector or even the svhs in HD
I have also found this link - http://www.highdefforum.com/showthread.php?t=1703 but with the TV having a PC connector i would asume it shouldnt be to hard to get playback
The PC will be playing the HD Content as its a Media Center i just want to get the HD feed playing on the TV in HD

NX7600GS-TD512z - Screen blanking issues at post boot

NX7600GS-TD512z AGP 8x
I just bought the AGP version of MSI NX7600GT-TD512Z (heat pipe cooling) yesterday and installed it into my system. All was well until I loaded the 9.3 drivers from the CD. After the next boot the display came up, loaded windows and just before my login prompt the screen went blank!
I could tell the system was continuing to load so I presumed it was a driver issue and downloaded and installed the 91.47 driver.
Unfortunately I have exactly the same problem with that version
I’m an old hat at hardware but I’ve never seen a display card that needed an extra direct PSU input, and I’m concerned that my current 350w PSU just haven’t got the punch to drive it.
Is this likely to be the case or should I be looking at some other cause?

Green-Tictac,
Moan Guide
Richard

MSI 915GM4 Motherboard and a P4 s775 2.66/1M/533 Processor - Dont Work

Hello Everyone,
I bought an MSI 915GM4 Motherboard and a P4 s775 2.66/1M/533 Processor yesterday and
assembled it by myself.But when I power it on, it won't display anything nor you can any hear beeping sounds.
So I tried to pull it out from the case to test only the Processor, Motherboard, PowerSupply, Memory and Monitor, but still It won't display nor you can hear beeping sounds that would indicate the cause of the problem.
Later then, I contacted a friend of mine who has a Celeron D s775 Processor and tried it on my MSI Motherboard. Its only the processor that was swapped and nothing else. Guess what? It displays and even loads to windows. So I was started thinking that my own processor might be the problem. But I did not conclude right away that the
processor is the problem and so what I did is I borrowed an Asrock Motherboard (s775)
from the same friend. Now, if this will not work then its confirm that my processor
might be the problem. But I was surprised when it work and still boot up to windows.
Confusion wraps my mind, the next time I started thinking about compatibility issues
and so I visited MSI site looking for CPU Support of my Motherboard and found out that
it should support. Well, to try to resolve this issues I tried flashing the bios for
the motherboard of its latest version updates, but sitll no luck..
Hmmmm.... what could be it? Did I miss something?
Well guys if you could help me on this I really appreciate it.. I don't really know now what move to take.
If anyone has an idea please email me at [email protected]
Thanks in advance...

start here https://forum-en.msi.com/index.php?topic=25959.0
list your power supply specs and name brand.
clear the cmos and retry!

Driver for MSI NX7600GS-TD256X AGP

Hi!
Sorry for the mistakes, I'm french.
I have a MSI NX7600GS-TD256X AGP as graphic card but any drivers is ok with this card. In the list of products nvidia and msi, it doesn't exist. So i don't know what i can do because i can't play at any game without this driver.
Thaks for your tip,
mmoussouni.

Just drop the X and you have your card here:
http://eu.msi.com/index.php?func=proddesc&maincat_no=130&prod_no=839
http://eu.msi.com/index.php?func=searchresult&keywords=7600GS
There simply is not "X" card. Google it. No hits at all (besides this thread and some thread you opened in a french forum. You are the only person on the planet who calls this card NX7600GS-TD256X
There is a "Z"-Card: NX7600GS-TD256Z: http://eu.msi.com/index.php?func=proddesc&maincat_no=130&prod_no=1142 ... but no "X" card.
It doesn't really matter anyway because there is no "specific" driver anyway, just the usual GeForce Driver Packet which covers a wide range of different video cards, including whatever card you have.
Quote
In the list of products nvidia
When you check the NVIDIA Driver Download Site there definately is a 7600GS in the list.

MSI NX7600GS AGP voltage

Hey i
have MSI NX7600GS 256mb heatpipe (AGP8x) i going to instal it to
Asrock K8Upgrade-NF3
motherboard specks: AGP8X slot (1.5V only ) , 1x AGP8X.
i think that NX7600GS voltages apg8x should be 0,8V but mobo has 1,5V ?
is it possible that i broke both of them. help needed.
thanks

It will works fine

MSI GTX 580 Lightning + Asrock Z68 Pro 3 Issue

Hi!
I just bought a new computer with gtx 580 lightning and asrock z68 pro 3 motherboard. I am having issues with the pci-e slot and the graphics card. My motherboard doesnt recognize the card. I have updated my MB bios to newest one but it didn't help. I also tried the lightning in my old gaming rig and it worked fine there. Also tried my old graphics card in my new rig and worked just fine. Power wise I should be fine because my old rig has 600w power supply and it worked, new rig has 50 wats more and is more quality PSU.
Also the red and green leds on the gtx 580 lightning are on and fans are spinning but when I try to attach the monitor it just doesnt give anything out.
I am really running out of options here and dunno what to do. I have the intel i5 2500k processor so I can use the onboard graphics to prowse the web. Also managed to install win7 64bit and MB drivers.
Anyone having this same issue ? Or any solutions to my problem? Would be nice to get my rig up and running fully.
Thanks!

Quote from: Bas on 07-September-11, 04:33:45
AsRock already tested the combination and it works:
http://forums.tweaktown.com/asrock/45683-asrock-z68-pro-3-msi-gtx-580-lightning-issue.html
Maybe the motherboard has broken PCI-e slots, as Asrock suggested, goto a dealer and check it out with them.
The combination is not a problem, but if a PCI-e slot is broken it can explain all of this.
As the card works in other systems, it's hardly possible it's the card, else it would fail too.
And yes, because an ATI card works it doesn't mean the PCI-e slot is good, have seen such before.
He replaced the board with new one Asus P8P67 Pro and still doesn't works on-board led shows VGA init error.
So 2 different brand new boards with broken slots is very unlikely. [both of them worked fine with different video cards]
The MSI's GTX 580 Lightning worked fine in meantime with the same PSU [he also tested with different one and it works fine with both PSU's on 3th board] on 3th different mainboard.
It's some kind of compatibility issue [based on all facts]
Quote
AsRock already tested the combination and it works:
http://forums.tweaktown.com/asrock/45683-asrock-z68-pro-3-msi-gtx-580-lightning-issue.html
They test it but not with the same card Lightning card, they used reference card instead [MSI N580GTX-M2D15D5].
The VBIOS structure of the non reference design used on Lightning cards are very different compared to regular versions,
as well the card itself compared to reference one.

The Crew –Racing with Your Coolest MSI Gaming Motherboard and Graphics Card

Most gaming fans are crazy about racing games, and there is a new game title just launched to fulfill gamers’ dream. We want to share with you the experience from Taiwan user who assembles a rig with a brand new MSI Z97 Gaming 5 motherboard and 960 graphics card, along with a hardware and game (The Crew) benchmarks. You may find the original article from:
https://forum-tc.msi.com/index.php?topic=113352.0
The Crew - Launch Trailer
PC configuration:
CPU: Intel i5-4670K
RAM: Avexir DDR3-1600 8G*2
VGA: MSI GTX960 GAMING 2G
SSD: Kingston HyberX 3K SSD 240G
CPU Cooler: SilverStone AR01
The MSI Z97 Gaming 5 motherboard box
Overview of the motherboard: Black and Red color scheme, it’s also the favorite color combination from MSI’s user reservation.
The PCI-E slots and bandwidth are enough for a two-way SLI setting.
Killer Ethernet, outstanding performance on internet access, especially reduce the lag issue.
The new arrival MSI GTX960 GAMING 2G graphics card
New cooling design: ZeroFrozr
The dragon symbol on LED panel
With MSI Gaming series motherboard plus graphics card, you can enable a Gaming App to overclock CPU and GPU. There are 3 modes to choose.
6-month free trail of the XSplit game caster software, free bundled with MSI gaming motherboard and graphics card
Done with assembling, quiet nice color combination and clean cable arrangement.
An overview of the very gaming look system.
Some benchmark results before racing with The Crew.
CPU and GPU info on CPU-Z and GPU-Z applications:
3DMark Fire Strike score: 6441
3DMark Fire Strike Extreme score: 3384
3DMark Fire Strike Ultra score:1262
The excel performance proof the brand new 960 graphics card comes with good a high Cost/Performance Value.
Now, check out this test benchmark score of the renowned game “The Crew”.
The game presents an ultra-quality display, 60 Frames Per Second (FPS)
FPS: Average frames is at:
Frames: 3859 - Time: 76828ms - Avg: 50.229 - Min: 43 - Max: 56
The comments of the game for your reference:
There are many types of missions that can be chosen from the America’s map.
Street racing, high-speed collision, breakaway from police, sky jumps, zigzagging, etc… make the game quite dynamic.
Now, when it comes to multi-player matches, the performance has exceeded expectations. Perhaps, it is the killer Ethernet that’s working the magic. Thus, this game is highly recommended if you have the right rig.
The downside is that the display intricacy is not as refined as GTA V and in addition, the game FPS is limited at 60 FPS. However, the overall gaming flow and performance is better than good.
The user's comment for using MSI Gaming 5 motherboard and 960 graphics card:
(The following commends are translated from user’s article, does not represent the viewpoint of MSI) ^^
Recently, MSI GTX 960 just launched so the initial price tag is still adjustable.
According to the current product line, it seems like this GPU is going to replace 750Ti. So once all the stocks (750Ti) at the store empties, we are most likely to see a price drop on GTX960.
Once the price hits the sweet spot, it’s time to try out GTX960 SLI’s performance.
The CP value on MSI GTX960 and GAMING 5 MB is pretty high. But the XSplit software that comes with the product is a bit annoying since the authentication steps are divided into 2 parts to go through for using it.
Enough said, anyways, GAME ON!

NVIDIA 960 card + GAMING 5 motherboard = best bundle for budget gaming!
it would be nice to see more testing of hardware-demanding games!

MSI x48c PLatinum and Intel E8600 Problem

Hello, I'm from Greece
My computer Setup is:
Mobo: MSI X48C Platinum (bios version 7.0)
CPU: INTEL CORE 2 DUO E8600
PSU: HEROLCHI 525 Watt
RAM: OCZ OCZ3SOE10664GK DDR3 4GB (2x2GB)
VGA: Albatron 8800 GTS
HDD: WD 300GB SATA
The problem is:
I bought them yesterday because i want to upgrade my system.
I connect them all properly in my case and after i turn the PC on it freeze in the MSI logo screen and cant even enter BIOS Setup.
The first time i turned the power on a message like: "Your previous overclockinn atempt was not succssefull. Press a button except del to load defaults and continue." i do what it said and freeze after that message.
This just the first time, the other times it just freeze on the logo screen. Some times it beeps one time and reset by his own and sometimes beeps four times and then reset. The most of the times it just freezes in the logo screen.
I took everything off and reinstall them. Nothing Happen.
I tried with one dimm of RAM each time in deferent positions. Nothing Happen.
I did o clear CMOS from the back button. Nothing Happen.
I perform a clear CMOS with the old method (unplug power, remove battery, wait for a couple o minutes). Nothing Happens.
I believe the problem is with the bios version i have and the CPU compatibility. I look at www.msi.com.tw and it said that this board its compatible with the INTEL E8600 but only at the 7.2 version.
How will i update my bios if my computer doesnt even enter bios setup?
Please help me. any suggestion. I'm losing my mind here!
Thanks you in advance.

Quote from: triangle on 28-August-08, 17:00:43
the only thing i can suggest is to drop in a 7.0 compatible CPU (if you can) and flash the BIOS to 7.2 that way then switch back in your new CPU. A painful process, I know ... Alternatively, if your retailer is friendly they might set it up on a test bench for you and flash it.
Andrew
Like Andrew mentioned, this is the only way out though it is a long painful process.
The other is to get a board that is compatible to the E8600 right out of the box.

MSI 785GM-E51 and memory modules problems

Could anyone help me with one problem. I have motherboard MSI 785GM-E51 and 4 memory modules GOODRAM GR 1333D364L9/2G. But when I'm inserting ALL modules my system not starting (even POST procedure). So working variants - when I'm inserting:
- one module in first (boot) slot
or
- they inserted in first and third memory slots
Any ideas?

It is not motherboard problem, but processor itself - I have AMD Phenom II X4 965 Black Edition 3,4 Ghz Core Revision C2 and this revision (according to the article: http://www.fcenter.ru/online.shtml?articles/hardware/processors/27650#02) has problems with support memory modules DDR3-1333 Mhz more than 2 modules. Conclusion - either adjust BIOS settings concerning memory timings and memory controller voltage or replace this kind of processor with the same type but with core revision C3

MSI gaming app and GTX760

After latest update for my MSI twin frozr gtx760, when i start MSI gaming app and turn gaming mode i get blue screen. I rly don't know what to do. Anyone else got some bad experience with it?

I have the latest version of the Gaming App. I am using the current driver for this card from the MSI download section for this card. So Nvidia prohibited putting more than 3Gb on a 780? That is depressing and frustrating. I got this card because I enjoy PC gaming on big monitors with high resolutions (not 1080P TV's) and I figured the high VRAM would help run games at high settings on the kinds of monitors I prefer. I was gaming on a 30" Samsung monitor @2560x1600 and now I am using a 34" 21:9 LG monitor @3440x1440. I'm starting to get a bit of a feeling like I wasted my money buying this card. I mean Nvidia is going to poopoo all over having extra VRAM on a 780, the MSI Gaming App won't work for an MSI card and even MSI Afterburner won't read the VRAM correctly on this MSI card.
Oh well, it's the card's fault and the card seems to run alright, but it doesn't seem to be running much better than the 3Gb EVGA 780 that the 6Gb card replaced. I am starting to wonder if I am not getting the best performance out of the card that I should.

MSI P67 GD65 and 1600mhz RAM

Picked up a MSI P67a-GD65 to replace my faulty (and by faulty, not SATA port faulty)Gigabyte UD3P. Anyways. I had a stable overclock of 4.7ghz on that board so I assumed w/ close voltages Id hit that on this board. Ive spent the last 2 days trying to get it stable to no avail. Dropped the speed to 4.5ghz even w/ same voltages and nothing.
Finally I dropped my RAM speed from 1600mhz c8 to 1333 c9. System is stable at 4.7 no problem now. The ram has been used for awhile without any issues on 2 other boards (P55a-UD3 and P67a-UD3P) and memtest checks out. Is there a problem w/ the 1600mhz strap on this board? Ive read other people have issues with certain RAM speeds as well (although it varys). Specs below!
MSI P67a-GD65
Intel 2600k cooled by H50 w/ push/pull 38mm deltas
Corsair DDR3 1600mhz C8 (2x2gb)
XFX 6970
Corsair HX750
Agility 2 240gb, (2) 1tb WD Black

Quote from: iamcyclopseatme on 12-March-11, 05:44:02
Screw you ELvis This is doz from OCF, was hoping to find someone from MSI chime in on the problem! Getting frustrated. I have some new GSkill 1600mhz c8 2x4gb on the way as my wife eats up the RAM editing pictures in photoshop and bridge at the same time. Maybe its the RAM, but it hasnt given me an ounce of problems yet! Maybe Ill try some 2000mhz C9 that I have laying around at 1866mhz and see if it likes that.
Any more of that and you will have problems you didn't expect.
This is a forum with users helping each other and that includes us moderators and the administrator, we do not work for nor are we paid by MSI.
If you expect to get direct technical support from MSI then contact MSI here:
>> How to contact MSI <<
>> Please read and comply with the Forum Rules <<

MOVED: [Athlon64] MSI Diamond-D and OCZ memory compatibility

This topic has been moved to Overclockers & Modding Corner.
[Athlon64] MSI Diamond-D and OCZ memory compatibility

More imortant than the brand are the types of chips used.
Winbond Bh6 and -Ch5 overclock poor on a AMD64 system, or u need to set the vMem redicoulisly high.
With Samnsung and Micron chips u can get the same timings @normal voltages (2,7v).
Here is a list of chips, icw brands:
http://www.techpowerup.com/memdb/
Make sure u get Micron 5B G or Samsung TCCD chips !
Agree with Stick about the amount of memory. First of all: Windows XP (32bit) cannot adress more then 3 GB, furthermore, no way in the world u are gonna use that memory. Stick to 2GB which is more then enough, heck, 1GB is allready more then enough 99,9999% of the time.

MSI Vox II and Vista

I bought MSI Vox II and I download from MSI site drivers for vista. But I have problem. When I start application it stops and send me error that I have to close it. Does anyone know if this driver is working with vista http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=1043 ?

I have Vista 32b and it is working on MSI notebook EX610. I have everything that I need with my hardware. Here I send problem detail that I have.
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   VOX-II.exe
Application Version:   1.4.3.748
Application Timestamp:   464aacaf
Fault Module Name:   KSTuner.dll
Fault Module Version:   1.0.0.2
Fault Module Timestamp:   464aabbc
Exception Code:   c0000005
Exception Offset:   00005095
OS Version:   6.0.6000.2.0.0.768.3
Locale ID:   1033
Additional Information 1:   f82b
Additional Information 2:   7ff53eccd7c2ad6cb4706eb175a96cd4
Additional Information 3:   f4f5
Additional Information 4:   cab9597762d550f21f03886fb9cb7bbb
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

ID a MSI wifi card - and manual!

Hi
I've just bought a PC from http://www.tiny.com which comes with a wifi card and antenna. Sadly Tiny don't provide any literature whatsoever, so I'm struggling to work out exactly what the various options are. Any ideas as to what the card will be?

TYPICAL I HAVE SPENT OVER A WEEK TRYING TO GET THE INFO I NEEDED, POSTED A HELP MESSAGE AND THEN FOUND THE INFO I NEED.
MS 6834 IS ACTUALLY PC54G2 ENTER IT IN THE SEARCH BOX AT http://WWW.MSI.COM/TW AND YOU CAN DOWNLOAD MANUALS AND SOFTWARE.
IF YOUR CARDREADER IS THE SAME AS MINE THE CR I530 (10 in 1)
THEN GO TO http://WWW.IN-WIN.COM/TW AND ENTER CR I530 IN SEARCH BOX

MSI NX7600GS-TD512Z and AsRock P4i45d+

Similar Messages

Maybe you are looking for