MSI NX7600GS-TD512Z To a HDTV (Total noob)

OK let me explain what i know and don't know
I am totally new to this HDTV stuff but my tv died so i am been forced to buy a cheap HDTV( has to cheap to replace it fast for my son). It's a basic 32" with a single HDMI and no PC port and i would assume its a 720p as a minimum.
After reading the forum and the help pages i know i have a yellow DVI port on the GFX card so its got HDTV out support.
My confusion arises as the card says it it HDTV ready. So i have some question i would like to ask so i don't blow up the PC or the TV
1: If its got the yellow port, why is the card HDTV ready?
2: If i am mistake (i am Dyslexic) how do i connect it to the TV?
3: If the card does not do direct HDTV out form the yellow DVI port is there any other way i can safely connect this GFX card to my TV's HDMI port with some third part hardware?
I do hope you can take the time to help out and to explain a little more about how this all works as i am new to this and don't want destroy what i all have. I am buying a 8800 card when i rebuild my pc later in the year but i was hoping i could connect it to my HDTV as i intended to use this pc a complete media center once my new system is built but i didnt really want to use the SVCD to scart and not use the HDTV
Thank you for you time

Thank you forget replying.
In reply to your audio comment this is solved by me using the sound card in the PC is linked up to my Hi-Fi so audio not a problem.
The TV i have order is a Samsung 32" LE32M87BDX/XEU HD
# LCD 100 Hz picture
# Screen resolution 1366 x 768
# 3 x HDMI connections (2 rear and 1 side)
# HDMI version 1.2
# HDMI CEC Technology
# SVideo input
# RF in
# Component in
# 2 x scart connections
# PC in DSub
as i would idealy like to DV-I to HDMI would i still be able to stream through the pc connector or even the svhs in HD
I have also found this link - http://www.highdefforum.com/showthread.php?t=1703 but with the TV having a PC connector i would asume it shouldnt be to hard to get playback
The PC will be playing the HD Content as its a Media Center i just want to get the HD feed playing on the TV in HD

Similar Messages

MSI NX7600GS-TD512Z and AsRock P4i45d+

Is VGA card MSI NX7600GS-TD512Z compatible with mother board AsRock P4i45d+?

Quote from: mctomas on 08-January-07, 19:00:33
Hi, BOSSKILLER
And thanks for reply.
OK I'll try to ask AsRock. One more question - power supply of my PC is 300 W, so I should also install new one or this can work with NX7600GS-TD512Z card?
think need to be replaced with decent one. single rail if possible with over 20A on +12V.
you can have a read here: https://forum-en.msi.com/index.php?topic=77071.0
good PSU suggestion: https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
Cheap, but good:
https://forum-en.msi.com/index.php?topic=103754.msg762155#msg762155

NX7600GS-TD512z - Screen blanking issues at post boot

NX7600GS-TD512z AGP 8x
I just bought the AGP version of MSI NX7600GT-TD512Z (heat pipe cooling) yesterday and installed it into my system. All was well until I loaded the 9.3 drivers from the CD. After the next boot the display came up, loaded windows and just before my login prompt the screen went blank!
I could tell the system was continuing to load so I presumed it was a driver issue and downloaded and installed the 91.47 driver.
Unfortunately I have exactly the same problem with that version
I’m an old hat at hardware but I’ve never seen a display card that needed an extra direct PSU input, and I’m concerned that my current 350w PSU just haven’t got the punch to drive it.
Is this likely to be the case or should I be looking at some other cause?

Green-Tictac,
Moan Guide
Richard

Total noob Q: Can I run virtual machines on a MacBook Pro ?

My apologies for entering totally green, folks. My last Apple was the first Mac I bought in university, sold quickly, and preceded by a bunch of ]['s. Sadly, I have been living under a rock for 20 years, and just this year spent $200k at IBM for servers etc in a pro capacity ...
My problem is that I am not gonna buy one more piece of lame Lenovo garbage ever again, and I need a new notebook.
The time has come where I am considering the change. I'd enjoy it really, to crawl out of this shell.
Because I am a total noob, the answer to my question is probably so easy for you folks ...
I need to keep Windows for now. I need to run Linux. I need to VM a few Novell 6.5 servers as I transition them to SUSE, and I have precisely zero MacOS apps at the moment.
With this said, does it make sense to consider a fully optioned MacBook Pro to take the place of a highest-end Thinkpad, to do the above (and more), using a Virtual Machine technology ?
My first months with a Mac would probably be spent in virtual machines as I get with the program, but I really do want to get out of this situation that nobody makes a good PC anymore and the best Wintel box seems to a Mac.
I want to believe. Please help me.

check
http://www.kju-app.org/kju/
Q is a free virtual machine, and can run windows and linux. You can also install win and linux and have triple boot. For information:
http://wiki.onmac.net/index.php/TripleBoot_viaBootCamp
MacBook Pro 2.16,ibook g4 1.33 Mac OS X (10.4.8) wireless mighty mouse and 1/2 ipod nano black

Driver for MSI NX7600GS-TD256X AGP

Hi!
Sorry for the mistakes, I'm french.
I have a MSI NX7600GS-TD256X AGP as graphic card but any drivers is ok with this card. In the list of products nvidia and msi, it doesn't exist. So i don't know what i can do because i can't play at any game without this driver.
Thaks for your tip,
mmoussouni.

Just drop the X and you have your card here:
http://eu.msi.com/index.php?func=proddesc&maincat_no=130&prod_no=839
http://eu.msi.com/index.php?func=searchresult&keywords=7600GS
There simply is not "X" card. Google it. No hits at all (besides this thread and some thread you opened in a french forum. You are the only person on the planet who calls this card NX7600GS-TD256X
There is a "Z"-Card: NX7600GS-TD256Z: http://eu.msi.com/index.php?func=proddesc&maincat_no=130&prod_no=1142 ... but no "X" card.
It doesn't really matter anyway because there is no "specific" driver anyway, just the usual GeForce Driver Packet which covers a wide range of different video cards, including whatever card you have.
Quote
In the list of products nvidia
When you check the NVIDIA Driver Download Site there definately is a 7600GS in the list.

MSI NX7600GS AGP voltage

Hey i
have MSI NX7600GS 256mb heatpipe (AGP8x) i going to instal it to
Asrock K8Upgrade-NF3
motherboard specks: AGP8X slot (1.5V only ) , 1x AGP8X.
i think that NX7600GS voltages apg8x should be 0,8V but mobo has 1,5V ?
is it possible that i broke both of them. help needed.
thanks

It will works fine

Total Noob - Need Advice

Hey there, I'm a total noob about Macs and I would like to know information on certain iMacs. I'm interested in getting one.
http://www.argos.co.uk/static/Product/partNumber/5082834/Trail/searchtext%3EIMAC .htm
Was looking at that, Is it a good version? And will it run high end games no problem.
Also any other information about macs, ie the Operating Software and what to expect is also welcome, always used windows, and once I get my paycheck on the 26th I'll be getting it
Thanks for ANY help.
~Jack

If you want to save few £. Visit Comet website
http://www.comet.co.uk/shopcomet/product/602450/APPLE-iMac-MB950BA?cm_mmc
On the checkout enter discount code " 6OFF " to safe extra 6%. And u can get this model for £845.06.
Remember that if you are in Uni. Or anyone u know is a student u can safe 15% on macs.
http://store.apple.com/uk/browse/home/education_routing?mco=OTY2ODQzMg
Also visit
http://www.apple.com/uk/why-mac/

Array methods for a total noob-

Well, not exactly a total noob, I’ve got an old project
in lingo/shockwave (where I have over 10 years experience) that I
need to convert to Flash/AS3 (where I have about a week’s
experience). I’ve got the basic navigation and interface
elements working but I’m getting stuck trying to extract data
out of my primary data structure, a two dimensional array. An
example of the first few lines of the array are attached.
My first task is to write a function that can return a new
one dimensional array, brandList, that contains a unique list of
manufacturers (second element of the sub-array, or tireData[j][2])
keeping in mind that tireData is not sorted and will contain
duplicate entries for manufacturers. It seems the filter method
will be part of my solution but so far I haven’t gotten
anything to work. Anyone know of a good tutorial on the subject?

If you want the second element of the array, it is index 1,
not 2. If you want to sort the results, you can use the
Array.sort() method. If you want some code that does the
extraction, study the following, it's one possible approach:

Help installing a MSI NX7600GS-TD256 GeForce 7600GS 256MB

Hello,
I was recently given this video card by a friend... MSI NX7600GS-TD256 GeForce 7600GS 256MB 128-bit GDDR2 AGP 4X/8X Video Card. The problem is that it didn't come with any installation instructions. I'm putting it in this motherboard http://www.foxconnchannel.com/product/Motherboards/detail_spec.aspx?ID=en-us0000114.
I know the graphics card is compatible with the motherboard. My question is do I have to connect the graphics card to the power supply in my computer.

gallienus,
Also next time please list your specs so we can get the full picture of what is in your rig.
This will also give us a chance to point out any issues which might be a problem for you.
Take Care,
Richard

MSI TV tuner card and HDTV

I decided for grins to connect my Pioneer Voyager HDTV box from Timewarner Cable TV (AOL) into my MSI TV tuner card to see what kinda picture I would recieve. Well, first I should say I am only allowed to use S-video and not the HDTV component cables (3), but it works. Timewarner at this time only offers 10 HDTV channels and rest or either digital (DVD quality) or analog. Some of the HDTV channels do not completely fill the screen and I have to adjust my screen to fit, but this is not to much effort. Some HDTV channels fit the screen but are in wide screen only and not full screen, but this was still pretty cool. I watched some of the wimbleton tennis in HDTV on my computer (awesome picture quality)
I am guessing that when HDTV becomes more popular and prices drop, that perhaps MSI might consider building a TV tuner card with HDTV outputs??

I have been seeing some amazing video using my msi TV-Tuner card (older card) and HDTV S-video inputs from my digital HDTV cable box. I understand what SteveK is saying about how S-video is not capable of displaying 1080i, but dang it looks awesome using dscaler. I did some searching and this guys says:
A better solution is S-video. Almost all players have s-video output. S-video looks much better than composite video, and only slightly inferior to component video. Hook an s-video cable from the player to the display (or to an A/V receiver that can switch s-video). The round, 4-pin connectors may be labelled Y/C, s-video, or S-VHS.
Link found here: http://www.home-theater-faq.com/whats_the_difference_between_composite_s-video_component_and_rgb_video.htm
Anyway I found some similar links that said about the same. In any case, if anyone wants to play with the HDTV viewing using dscaler and an HDTV s-video connection, it might be of interest.

MSI NX7600GS AGP direct3d problem

hallo,
recently i replaced my MSI GF4ti4200 (128MB) with the NX7600GS
i did a lot of testing already so i've tried to make an overview
(i've tested OpenGL with Doom3 and Direct3D with 3Dmark2001,2003,2005)
in al my test situations, 2D works perfect
i have an older motherboard (VIA KT133)
AGP4x mode with Fast Writes
- OpenGL = crash when entering 3D mode
- Direct3D = crash when entering 3D mode
AGP4x mode without Fast Writes
- OpenGL = crash when entering 3D mode
- Direct3D = works, but heavy graphic corruption (clipping errors, texture errors)
AGP2x mode with/without Fast Writes
- OpenGL = works perfect
- Direct3D = works, but very heavy graphic corruption (clipping errors, texture errors)
so i guess my motherboards AGP port isn't that good (although the GF4 always ran very stable at AGP4x with FW)
because it doesn't make lots of difference i do not care about AGP2x or 4x, but i get the feeling Direct3D seems to do better in AGP4x mode
i already tested the VIA drivers for my motherboard (old and new ones) and various nVidia drivers (there were a lot on the MSI install cd, but few of them work with a 7600)
the card is OK cause i got it to run perfect in Windows2000 in AGP4x mode, but then i installed WindowsXP...
(i already reinstalled Windows2000, but i did not get to run anymore cause for some reason)
Some cards change frequency's when entering 3Dmode, does this card do that too? and how can is disable this (some people say this causes problems on older motherboards)
any suggestion is welcome

Quote from: ivangelion on 09-October-06, 22:52:15
not all agp4x mobos can handle agp8x vga... i had experienced that.
i didn't know if that vga has extra power conector, if not maybe the mobo cant give enough power to the vga.
if there is an extra power connector then must be attached, and the psu is important, not only the wattage, but the amp on each rail. so post detailed specs of your psu. good look
yep catfishjvl folow ivangelion advice and paste PSU details which i has been asked before.
agreed, there is 3-4 simular cases with old VIA chipset board and simular problem. all is unresolved for now.
catfishjvl you can try to push AGP voltage to 1.6V may help. and retest. but dont go more than 1.6V

Crew I am a total Noob here please help!

Crew,
First let me say I am a Noob at Flash. I recently purchased
Studio 8 and CS2 Photoshop. I created a basic button in flash using
the default Up,Over,Down and hit routine. I have the frames working
and can save (publish) the file ie: Button.swf.
Once I am in Dreamweaver 8, I can import the Button.swf using
Insert>Media>Flash option. The button appears in the website
and the graphic animations interact with Up,Over,Down.
Here is where I exhibit to you pros out there that I am a
complete idiot!. I can not find a way to link or target with the
button. I am use to simply providing a link to the web object
inside of Dreamweaver. Much like the provided style flash buttons
do in Dreamweaver. Is there a way to create a flash button and have
it act like the style buttons ie: with the options to link and
such?
I feel I am missing the code needed for Dreamweaver to talk
to the Flash button? And if so, I take it needs to be included
prior to publishing of the Flash Button? Any help would be great
guys!... Otherwise I’m looking for a book “Making a
Flash Button and using it in Dreamweaver8 – For Complete
Idiots “
Stephen

Hi,
If you are using Flash 8, this would be very easy for you.
All you have to do to add video to your file is to import your
video and Flash will open the video importer wizard for you. move
through the steps. Do not choose embedded video if you want your
video to play externally. Then choose your player skin.
Flash will generate the FLV file for your video and add
controllars to your video in the stage. This is the easiest way as
you do not have to add any code my hand for the controllars.
If you like to just export video to FLV, use the Flash FLV
exporter that come with Flash mx 2004 and Flash 8

Total noob forgive me

Ok so i'm using what I believe to be the newest version of adobe premiere pro and the media encoder. just downloaded the software 4-5 days ago.
My source video is 1920x1080 60fps .mts files from my canon vixia hfm31 camcorder. My video its about 3.5 minutes with an mp3 song.
When I go to export it to the encoder, i click the box that says match source sequence and then go to the encoder. It shows the source type as "mpeg preview". But whenever I try and click the green play button to encode it tries to run for a few seconds and then I get an message saying can't encode "disk full". The source is the desktop of my C: drive and I have about 80 gig left so I know that can't be true.
If I use the presets like youtube for example it will encode. But I noticed youtube encodes at 29.97 fps. I was hoping to get a 60 fps vid.
Anyway, anyone have a clue why I'm getting this message? or what i'm neglecting to mention in my question??
Also is there a tutorial on the basics of using this software/encoder. I love it but it looks like there is so much to it and I'm a noob at video production/editing. I'd love to learn all I can about it. Any good directions that I can be pointed in I'd really appreciate it.
Thanks guys

Best practice is to keep video assets on a drive that is NOT the C: drive, if possible. On that same note,
avoid overly long file names, as I see with your "My Documents" string. Create your own folder for this stuff.
Next, I see that "Target" and "MAX" are both set the same. Normally, the Target is somewhat less than
Max...since "Target" really means AVERAGE bit rate.
For YouTube encodes, TURN OFF "Match Sequence Settings", and choose the H.264 format and then pick the "YouTube widescreen HD" preset. This will encode 720p video. Set frame rate to 29.97, and choose "Use Maximum Render Quality" box at the bottom of AME window. This should provide good results for YouTube viewing.
Jeff Pulera
Safe Harbor Computers

Total Noob wanting some help

Hi guys I just got new job and they use CF over here. My
first small project is thowing me for a loop just because I've
never really worked databases before. I'm looking for some starting
help. We have this intranet site that everyone here uses to place
orders and stuff, they all use bunches of databases. And what my
boss is wanting me to do is find a way to put a count of all the
items in a database that match a certian criteria on the main page.
So what I need is a way to count database items. Help would be
helpful. Like I said I'm a total n00b and forgive me if you can't
make heads or tails of this. I'd be glad to explain more in depth
for help. Thanks guys
Kevin

Well, let says that you want to get a count of everything in
your ITEMS table that has a QUANTITY of at least 3 and a PRICE of
greater than $5.00 (assuming that QUANTITY and PRICE and columns
within the ITEM table)
A real simple way of handling this app would be to first do
the query and then out put the result. Your entire application
would be:
<cfquery name="qGetItemCount"
datasource="datasourceName">
SELECT Count(*) AS itemCount
FROM items
WHERE quantity >= 3
AND price > 5
</cfquery>
<cfoutput>#qGetItemCount.itemCount#</cfoutput>
And that is it. It only gets more complicated from there, and
you need to strongly consider some learning resources if you want
to excel at ColdFusion. It is an easy language to learn and use,
but, like any other language, it should not be fuddled through.
Note: You'll need to get your datasourceName from your
administrator.

Total noob help requi

i cant believe that i need to ask this, but someone must help, the frustation is growing, and my pride cant stop me now.
i just bought a zen xtra 60 gig, HOW THE HELL DO YOU TRANSFER MUSIC TO THE PLAYER!!?!
im not that much of a pc novice, i can normally sort these things out, but this has confused the hell out of me and the help section hasnt helped. although im sure it is simple
i've ripped a cd, which just seems to have to my pc, what do i do know, i cant find a transfer to player button.
please help,
im sorry for asking such a noob question
ste

Whoops yes, "Get Info". There's a bug that seems to happen with the MediaSource installer where the CDDB files don't get registered which might be the issue. Try following the guide here on reregistering the files.

MSI NX7600GS-TD512Z To a HDTV (Total noob)

Similar Messages

Maybe you are looking for