MSI P35 NEO & dual core center problem

hi, i have a problem with my motherboard msi, Bios 1.2  and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen  and it dont let me to overclock my cpu    , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
any help?   
sys specs
msi p35 neo bios 1.2
core 2 quad q6600
2 gb value ram
psu duck

right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
 thanks for the reply

Similar Messages

  • MSI NEO4 Platinum + DUAL CORE detection problem after soft reboot

    I just build a new AMD dual core system (4800+) and it consistently fails to detect the second core after a soft reboot from windows Xp.  The MSI NEO4 Platinum came pre-flashed with the latest bios version 1.B.  If power off or use the reset button I can consistently get it to detect both processors.  Anyone else having this problem? Or know of a solution?
    Thanks.

    Hi, I did a upgrade from a 3200 venice to a Opty 165.[This is a different situation than your new build] I deleted the uniprocessor ACPI from the device manager before I removed the old cpu. It was a bit weird for me in that at first the bios saw it as a 165 dual core then the next time it would come up as single core. It went back and forth a few times between single and dual core in bios. I tinkered with a few things in the bios but not really sure if it helped but it eventualy stayed as dual core in bios and showes as dual core in windows. I have my MPS table version set to 1.4 in bios [ but it was this before change in cpu] also my IOAPIC is now greyed out [unable to change it, but it wasn't before] - both these are in Advanced bios features. In power management I have the ACPI standby state set to auto. Hope some of this might help you.

  • Msi p35 neo, i cant install

    Hello
    Recently i bought a new pc (mb: msi p35 neo; cpu: core 2 duo 6750). I tried to install but when the instalation search for packages, the system doesnt see the dvd drive (it is a LG GSA-H55N), so I cant install.
    Any answers will be well recived.
    Felipe Cordero.

    hello, My dvd drive has ide-atapi interface. FInally I can install Linuxmint 4.0, but I still want to get run archlinux, because I really like it.
    Here is the list of the modules loaded by linuxmint:
    Module                  Size  Used by
    af_packet              24840  2
    binfmt_misc            12936  1
    rfcomm                 42136  2
    l2cap                  26240  11 rfcomm
    bluetooth              57060  4 rfcomm,l2cap
    ppdev                  10244  0
    acpi_cpufreq           10568  0
    cpufreq_powersave       2688  0
    cpufreq_stats           7232  0
    cpufreq_userspace       5280  0
    cpufreq_ondemand        9612  2
    cpufreq_conservative     8072  0
    freq_table              5792  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
    video                  18060  0
    container               5504  0
    sbs                    19592  0
    button                  8976  0
    dock                   10656  0
    ac                      6148  0
    battery                11012  0
    parport_pc             37412  0
    lp                     12580  0
    parport                37448  3 ppdev,parport_pc,lp
    snd_hda_intel         263712  1
    snd_pcm_oss            44672  0
    snd_mixer_oss          17664  1 snd_pcm_oss
    snd_pcm                80388  2 snd_hda_intel,snd_pcm_oss
    snd_seq_dummy           4740  0
    snd_seq_oss            33152  0
    snd_seq_midi            9600  0
    snd_rawmidi            25728  1 snd_seq_midi
    snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi
    nvidia               6221648  34
    xpad                    9988  0
    sr_mod                 17828  0
    cdrom                  37536  1 sr_mod
    i2c_core               26112  1 nvidia
    pcspkr                  4224  0
    snd_seq                53232  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    snd_timer              24324  2 snd_pcm,snd_seq
    snd_seq_device          9228  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    intel_agp              25620  0
    psmouse                39952  0
    serio_raw               8068  0
    snd                    54660  11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    agpgart                35016  2 nvidia,intel_agp
    shpchp                 34580  0
    pci_hotplug            32704  1 shpchp
    soundcore               8800  1 snd
    snd_page_alloc         11400  2 snd_hda_intel,snd_pcm
    evdev                  11136  4
    joydev                 11328  0
    reiserfs              248704  1
    sg                     36764  0
    sd_mod                 30336  5
    usbhid                 29536  0
    hid                    28928  1 usbhid
    pata_marvell            8064  0
    ata_piix               17540  4
    r8169                  32260  0
    ata_generic             8452  0
    libata                125168  3 pata_marvell,ata_piix,ata_generic
    scsi_mod              147084  4 sr_mod,sg,sd_mod,libata
    uhci_hcd               26640  0
    ehci_hcd               36492  0
    usbcore               138632  5 xpad,usbhid,uhci_hcd,ehci_hcd
    thermal                14344  0
    processor              32072  2 acpi_cpufreq,thermal
    fan                     5764  0
    capability              5896  0
    commoncap               8320  1 capability
    fuse                   47124  7
    Are there any module for my ide-atapi dvdrom that arch doesnt load at boot??? If someone know about that I will be very happy

  • Problem with Dual Core Center and MSI 3870

    Hello again, my previous thread is this:
    https://forum-en.msi.com/index.php?topic=113164.0
    The VGA works well, the problem is that AFTER i installed it the Dual Core Center stoped to work!!
    Installed the dotnetfix again but no avail, still doesn't work.
    And i know that happened after installed the VGA, so i believe that must be part of the problem.
    Thanks!

    Try the latest version of Dual Core Center.
    You will find many alternatives for DCC here: https://forum-en.msi.com/index.php?topic=107133.0

  • Problems with msi p35 neo 2

    Default problems with msi p35 neo 2
        pc works fine when using windows and the net and emails
        only when using 3d mark or games do i ever get problems
        just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
        tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
        now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
        temps on the board (from msi dual core center temps cpu 33oc system 47oc)
        memory voltage 2.1
        any one know the settings for the ram
    more details you need
    System Details
    MotherboardEdit Value
        msi p35 neo2 fr
    Motherboard BIOSEdit Value
        latest
    CPUEdit Value
        core 2 quad 6600
    CPU Overclock SpeedEdit Value
        none
    CPU HeatsinkEdit Value
        standard intel that come with cpu
    CPU Idle TempEdit Value
        N/A
    CPU Load TempEdit Value
        N/A
    MemoryEdit Value
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
    Memory VoltageEdit Value
        N/A
    Video Card(s)Edit Value
        ati hd4870
    Video Card SpeedEdit Value
        N/A
    Sound CardEdit Value
        onboard
    PSUEdit Value
        g7 780 watt power extreme
    Hard Drive(s)Edit Value
        mator dimondmax 21
    Optical Drive(s)Edit Value
        N/A
    Other CoolingEdit Value
        3 80mm fans 1 frount 1 back 1 side
    ModsEdit Value
        N/A
    Operating SystemEdit Value
        windows 7

    Quote
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
       Quote
    memory voltage 2.1
    Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x).  Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800).  The voltage at these settings should not need to exceed 1.95V.  So please lower it accordingly.  In case the freezes still occure, please run memtest86+ to check your memory for errors.
    Quote
    msi dual core center
    Please get rid of that tool for all further tests.  Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

  • VCORE PROBLEMS WITH MSI P35 NEO F

    To see if I can help or at least explain what's happening, buy a MSI P35 NEO F for using a quad, the topic is as follows handling vcore is rare
    First thing I can not put less voltage that the cpu brings default, second what happens next if bios setting 1.3250 vcore for Quad, once in both windows everest, cpuz, like others programs tell me that this placed on 1.40 vcore which is excessive for the speed at which the quad, this is so in this mobo? Their story that was installed version 1.20 bios which handled vcore%, the upgrade to version 1.40 and is now handled in decimals (numbers) vcore, but still the problem
    You pull more vcore which setting in bios and if you want to download the vcore eg put 1.26 vcore not let you because it takes the vcore default of cpu minimum.
    i'm  not crashing or problems with the temperatures, but nobody likes to have more vcore's necessary.
    Wonder because being rookie of this mobo, maybe there's some bios version that fixes this bug or someone knows something else, thank you guys
    C2Q Q6600
    2 X 1GB G.SKILL 6400
    PSU 550 MODULAR TOPOWER
    -- SORRY FOR MY ENGLISH --

    You can slap 1.6v in that CPU and temps won't rise that much.
    Core 2 Duo/Quad operates @ 1.250-1.425, anywhere in between those values is perfectly stable for Intel stock cooler and frequency.
    Absolutely nothing to worry about. But if you want to complain about >1c I really can't see the sense in that.

  • P6N SLI V2 problem with "dual core center"

    I have the P6N SLI  V2 with E4400 and 7600gt running XP pro sp 2.
    after installing and running MSI's "dual core center" (including .Net framework) I only have the "VGA" option enabled, the "MB" option is disabled as well as the D.O.T option. I tried uninstalling and reinstalling as well as downloading the latest version, but I have the same problem. I get no MB options at all (like no cpu temp, fan speed, core speed etc.). I didn't make any changes to the BIOS yet (other than changing the boot sequence), and ideas?

    Quote from: nautica on 15-July-07, 13:19:02
    and ideas?
    A great one.
    Don't use MSI's utilities. Anyone here will tell you that.

  • MSI P35 Neo & Core2Duo E6550, Windows & CPU-Z finds ONLY 1 core...?

    Windows device maneger shows only one core for my system. Is this normal bahaviour?
    Also CPU-Z indicates one core. Is there something I can do to solve this issue?
    Not really nice feature when using Core2Duo!
    MSI P35 Neo, BIOS v.1.30
    Intel Core2Duo E6550
    2Gt Green DDR2 800MHz, Dual Channel
    MSI 2600XT 512Mt, Silent

    Quote from: Jack the Newbie on 13-October-07, 20:23:16
    Note: If one or both of the first two Options is disabled at the moment and you have to enable them, Windows may not boot anymore.  You will have to Re-install the OS or try a repair installation.  Windows XP is not able to automatically adjust to the changes automatically.
    There is a fastest way without bother to repair or reinstall OS..
    We can force desired HAL by this way, the method used is very usefull and can be applied even when OS doesn't provide choice for manual HAL update.
    (etc: desired HAL is not listed as choice... Windows often becomes rather stupid...):
    Advanced Configuration and Power Interface (ACPI) PC  & ACPI Uniprocessor PC  use the same kernels, etc: only specify hal is enough:
    in boot.ini ---> /hal=halacpi.dll (for Advanced Configuration and Power Interface (ACPI) PC) and /hal=halaacpi.dll (for ACPI Uniprocessor PC)
    NOTE: files should already exist into system32 folder. file version should match with currently version installed. if you got SP2 get files from here:
    "C:\WINDOWS\Driver Cache\i386\sp2.cab", open with winzip and get correct hal which you need:
    Advanced Configuration and Power Interface (ACPI) PC  ----> halacpi.dll
    ACPI Uniprocessor PC ------->  halaacpi.dll
    ACPI Multiprocessor PC -------> halmacpi.dll
    or use microsoft expand if you don't have winzip:
    cmd, go to C:\WINDOWS\Driver Cache\i386\
    type from there:
    expand sp2.cab -F:myhal.dll c:\windows\system32
    where myhal.dll= your chosen hal (halacpi.dll, halaacpi.dll or halmacpi.dll)
    for XP without SP2, same procedure but look for HAL files into "\I386" XP installation folder(and those syntax from there:)
    expand HALACPI.DL_ %systemroot%\system32\HALACPI.DLL
    or expand HALMACPI.DL_ %systemroot%\system32\HALMACPI.DLL
    or expand HALAACPI.DL_ %systemroot%\system32\HALAACPI.DLL
    or to force directly to default hal:
    booting from recovery console command prompt, or from other location and load NTFS mounter with read&write NTFS support:
    navigate to root OS drive and go to OS root directory(%windir%) into system32 folder:
    example: (where C is OS root drive, and "windows" is OS root folder)
    C:
    cd windows\system32
    ren hal.dll hal.old
    cd "c:\windows\driver cache\i386"
    expand sp2.cab -F:myhal.dll c:\windows\system32    /* where myhal.dll should be replaced with one of chosen hal: halacpi.dll, halaacpi.dll or halmacpi.dll */
    cd "c:\windows\driver cache\i386"
    ren myhal.dll hal.dll  /* where myhal.dll should be replaced with one of chosen hal: halacpi.dll, halaacpi.dll or halmacpi.dll */
    for ACPI Multiprocessor PC we need to update kernels too, go to c:\windows\system32 and make backup 1st: (under pure DOS, or different OS)
    force ACPI Multiprocessor PC:
    cd c:\windows\system32
    ren ntkrnlpa.exe ntkrnlpa.old
    ren ntoskrnl.exe ntoskrnl.old
    ren hal.dll hal.old                                 /* backup hal too, gona replace it also */
    cd "c:\windows\driver cache\i386"
    expand sp2.cab -F:halmacpi.dll c:\windows\system32
    expand sp2.cab -F:ntkrpamp.exe c:\windows\system32
    expand sp2.cab -F:ntkrnlmp.exe c:\windows\system32
    cd c:\windows\system32
    ren halmacpi.dll hal.dll
    ren ntkrpamp.exe ntkrnlpa.exe
    ren ntkrnlmp.exe ntoskrnl.exe
    reboot PC you have done, no modification into boot.ini is required. at XP startup will detect new hal installed and will be asked for reboot. you have switched to ACPI Multiprocessor PC.
    You can review default HAL files and restore it if you don't have backup(if you skip or forgot to make backup) from looking here: \Windows\Repair\Setup.log search for "HAL" inside will find original file name locations.
    also HAL query can be obtained from this registry key: HKLM\SYSTEM\CurrentControlSet\Enum\Root\ACPI_HAL\0000\HardwareID
    The thing that need to take attention is that:
    Make sure that HAL along with both kernels will be from same SP, etc: if you currently use SP2 dig for HAL file & kernels in:
    C:\WINDOWS\Driver Cache\i386\sp2.cab
    respective if you are using SP3:
    C:\WINDOWS\Driver Cache\i386\sp3.cab
    If no there is no SP installed look for them in I386 folder in XP installation disk.
    Takes less than 2 minutes, and switch to desired HAL without troubles.

  • Problem with my MSI P35 Neo MotherBoard [Cannot find harddrive]

    Hi guys.
    So, I've been trying to install Archlinux for a while now, and I've been trying to figure out what problem Is by myself, and I've been asking a bunch of people, but it seems that it's going to a dead end.
    What we figured out, and what we "think" it is, is that the controller on my motherboard does not support the system, and my SATA disk that I am trying to install on.
    What i have tried is that.. I've followed the "beginners guide" to install arch linux, and when i noticed that i got a big problem with my harddrive i asked some people for help, tough we cannot figure out what the problem is..
    Firstly i boot up with my ArchLinux CD.. Then i write km, to change the keyboard layout. Then /arch/setup ofcourse . After that when i try to partitionate and set mountpoints for filsystem it does not show any kind of hardware at all. So i tried to partitionate with gparted and then boot up with Archlinux again to install all my packages etc etc. But it seems like it does not write the information to anything.
    This is a big problem for me cause i really want my Arch distribution to work, so please guys.. Help me!
    EDIT
    Just in case you wanted to know.. My motherboard is a MSI P35 Neo
    Last edited by rahanjam (2008-10-07 14:03:35)

    pointone wrote:*snip*
    I don't have this AHCI option. So i don't know what to do else. Do you know?
    AD28 wrote:*snip*
    Do you mean, that my mobo doesent support linux, and that i cannot have it?

  • DKA790GX Platinum, have problem with changing FSB in Dual Core Center

    Hello guys, freshblood is here,
    I change fsb in Dual core center, but unfort.  core temp and CPUZ don't reflect any changes.

    I agree.  The BIOS gives you better control with better options.
    Quote from: Jack the Newbie on 26-January-09, 02:14:05
    Dumb MSI Dual Core Center.  It is not the best tool ever developed.  Use the BIOS for overclocking your system.

  • P965Neo-F V2 MSI Dual Core Center Support

    Hi.
    I brought MSI P965Neo-F v2 MB and MSI 7600 GT graphic card, now i installed Dual Core Center and it shows only Graphic card info, is it some bug? i tryd core center and it showd me alot wrong info, like no cpu fan, sys fan 5k rpm and +12v was 24v. Anyone else having trouble whit DualCoreCenter utility?

    all other utilitys lie, 12v shows 24v, 3v shows 0,12, cant be real, and no fans at all:D

  • Help...MSI 975x Platinum PUE + Dual Core Center + MSI 7900 GTX

    I have an MSI 7900GTX on my MSI975x MB.  I've read the dual core center manual and it states that Dual Core Center can also monitor VGA temps and whatnot as long as it's an MSI Graphics card.  Currently I am unable to monitor VGA stats on Dual Core Center due to the fact that it is greyed out.  Can anyone tell me how to activate this feature?

    To know you GPU temps, you can access it via Display Properties for nVidia cards and for ATi cards, you can view via the ATI Control Panel.

  • Dual Core Center- MSI 8800 GTS and MSI P6N SLI Platinum.

    I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything.  ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card?
    Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
    {I put this in the MOBO forum too as it hits both areas...}

    Found that AtiTool (latest beta) works on the 8800's. The "find max core" and "find max memory" don't work perfectly though, as they start the overclock and then are supposed to check for errors; they are supposed to stop the adjustment upward when they encounter erros and come back down......    AtiTool just kept cranking it up, although you could visibly see the little 3D screen artifact all over the place. But It gave a good starting place to do the OC manually and then go run the scan for artifacts and errors manually.  AtiTool listed the stock core at 513 and stock memory at 792. I was able to take the core up to ~644 and the memory up to ~877. I backed these off some (as you can't run both at max!) and it looked stable at 630 core, 860 memory.  Ran through both 3DMark 05 and 3DMark06 without a hitch. Need to check it out with some extended gameplay now.

  • Dual Core Center- MSI P6N SLI Platinum and MSI 8800 GTS 640

    I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything.  ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card.
    Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
    {I'll put this in the graphics forum too as it hits both areas...}

    Running a P6N SLI Platinum and a MSI 7900GTO with Dualcorecenter 2004 and everything is ok.
    Never installed any driver from the MSI CD which comes with the board or graphics card. All drivers are downloaded
    from Nvidia.
    Maybe the 8800 series is not supported yet.

  • MSI P6N SLI Platinum, Dual Core Center and Mem Voltage

    I set my memory voltage for my Corsair sticks to 2.0 just as TheRamGuy at Corsair's House of Help forum had suggested. However, in Dual Core Center, it reports that the Memory voltage is at 2.7!!!!.
    I seem to vaguely remember some threads somewhere in one of the forums about the MSI boards frying higher voltage memory, and so am concerned to say the least.   
    Or is there a better program that can display the Memory voltage??   Or do I believe the Dual Core Center readings?

    Quote from: NovJoe on 13-April-07, 16:01:41
    CPUID would let you know if your RAMs are running at the correct timings.
    You can try SisoftSandra or Everest to check on the detected voltage in Windows.
    OK, I've downloaded both SiSoftSandra and Everest. I don't see anywhere where these programs report/measure a memory voltage. One one screen, it will report on the SPD settings for the memory and lists the rated RAM voltage "setting", but not the actual juice going to it.
    Oh, well. Must just mark it off as one less thing to worry about

Maybe you are looking for