Msi p35 neo Front Audio Jacks Not Working

i have msi p35 mainboard and EZcool case in the front i have 2 usb,mic in and headphones jacks
the usb jacks are working and but mic and headphone jacks doesn't work
I instulled the driver and it Show me the jacks but the steel doesn't work
What should I do?
plz help me
now you can see my promplem in video

Deactivate the automatic front panel audio jack detection option in realtek hd audio manager.

Similar Messages

P965 Neo-F audio jacks not working.

I've been having serious issues with the audio jacks on the P965 Neo-F board. I have actually tried two boards, convinced the first board was defective since my speakers worked fine on other computers. On both the current board and the last board, I did a complete clean XP install, formatting my hard drives and installing the latest RealTek HD drivers (5.10.0.5404 dated 4/23/2007, from MSI). The first board never so much as peeped, while the board I have now has made some sounds, although I honestly don't know why. On this board, I had a set of Altic Lansing 2.1 speakers, but because the speakers would pop and make static noises every now and again, generally only if I bumped one of the small stereo speakers or wiggled the cords on the back of it, I thought perhaps the problem was the speakers being old.
On the current board, I tested a monitor that has speakers in it, and there was no sound. RealTek's sound manager, which I have installed, did not recognize that there was anything plugged into the jacks even though I had a line in, microphone, and line out plugged in. When it did recognize the lino out, it also recognized the microphone. However, it only recognized them for no more than a minute. The new speakers (also Altec Lansing 2.1) made one squeak for less than a second; other than that, there has been no sound at all.
I've tried several different RealTek HD drivers from MSI, Microsoft, and RealTek, but none have made any difference. I've enabled and disabled only to re-enable the audio device through BIOS with no success. I've checked the volume, DxDiag, and played music--Winamp and iTunes are both making sound, but no sound is coming out.
I'm pretty much out of ideas here. The only thing I can think to do is get a sound card, but I don't see why I should have to do that when I'm not an audiophile and the board jacks should suit me fine. I am quite at my wit's end with this, and would appreciate any help I can get.

Quote
It recognizes that I pluged something into the microphone jack but can't get the microne to work.
This problem usually has to do with the fact that the computer case used, or to be more precise: its front panel audio connectors are not fully Intel HD Audio compliant. Disable the Automatic Front Panel Jack Detection Function in the Realtek HD Audio Manager and retry.
If your mic still does not work as it should, browse through the Realtek Program Folder and look for an executeable file named "miccal.exe". Run it to calibrate your microphone. Also, enable "Microphone boost" in the Mixer-tab of the Realtek configuration program. The top half part of the mixer Tab ("Playback") can be scrolled to the left via <> buttons. Scroll left and localize the input jack your mic is plugged into (example: "Rear Pink In"). Click on the Options button and enable microphone boost.
Quote
When I go into the mixer settings I can't adjust adjust any of the inputs - cd, mic, line etc. Although it shows places for a sliding volume adjusters but doesn't show a slider to be able to adjust the volumes of the inputs.
That is totally normal and not a problem. It is basically a limitation of the Realtek HD Audio Driver in combination with Windows XP. It has nothing to do with the board. Here is an Asus-example:
There is nothing wrong here. If you scroll through that output devices/jacks in the Mixer tab of the Realtek HD Audio Manager, you will find that you can adjust the input/output volume for each audio jack individually. Doesn't make sense to adjust input volume in the output section? Well, ask Realtek which genius designed the interface and ask him personally.

P6N Diamond X-Fi Xtreme, back audio jack not working after windows reinstall

Hi everyone,
I've been having a problem with audio since reinstalling windows. Previously under windows xp sp3 i had no issues but after the most recent reinstall of windows xp, the rear jacks for the audio aren't working despite the front headphones jack working perfectly fine. Since this was only a short term measure, i didn't bother trying to sort it out until now, when I've now installed windows 7 on the computer and the issue still exists.
I'm using the latest driver available on the msi website http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1168 and I have also tried using the audio driver patch available on the same page.
The fact that there were no problems before a recent windows reinstall and that the issue is mentioned on the driver download page makes me think the problem is with the drivers and not with the hardware.
I searched through the forums and while a fair few people seem to be having the same issue or similar issues with audio jacks not functioning properly, i couldn't find a relevant solution for me.
Cheers,
Dave

Yep that sounds exactly like my problem. The issue lies with the on board soundcard and their vista drivers. Creatives' vista drivers are notoriously bad. This coupled with the fact their drivers won't even INSTALL on a p6n board because their drivers do not detect the onboard soundcard adds to the problem. As far as I see it there are two ways to solve this issue:
1.) Buy a front audio panel addition to your case.
I am not sure on your setup but here is one with HD audio support: http://www.newegg.com/Product/Product.asp?Item=N82E16813999356
And that will fix your back panel port, and give you the option to use the front as well.
2.) Buy a new soundcard.
This is what I did after learning that the onboard x-fi isn't even a real x-fi card. I opted to buy the X-Fi gamer (cheapest of the X-Fi cards) and so far the drivers have been acceptable in vista. My non-hd front ports work, as well as my back port.
Another alternative would be to wait for MSI to release an update to the creative drivers that they provide. No guarantee on that though.

Front audio port not working please help..

Hey guys,
My HP Pavilion DV2275ea front audio jack does not work, I have tried many different headsets as the mic jack works just fine. I have tried reinstalling audio drivers (Conexant High-Definition Audio Chip) and still nothing. I have look at the support advice posted to no avail. Is there anything else i could try?
A friend said it could be turned off in the bios but i am not able to get in as i don't know the password for the phoenix bios, could this be true?
Any help will be greatly appreciated

Well from looking at a jpeg of your board the front usb headers are laid out just like my board. Each set of headers support 2 usb ports each. That gives you the 4 in the rear and 4 for the front.
Now as to the pinouts, 1+3+5+7+9 is 1 set and 2+4+6+8+10 is the 2nd set, with pins 1 and 2 being the 5V power pins. Pins 7 and 8 are your grounds. 3 and 4 are the usbo- and usb1-. Pins 5 and 6 are usbo+ and usb1+. Pin 9 is the "key" pin and may actually be missing by intention. Key 10 is sometimes called the usboc pin and normally isn't used. On some boards you don't want anything connected to pin 10, even if you have to snip the wire going to it and terminate the end of the wire with insulating tape.
Your motherboard manual should show you the pin layout.

Front audio panel not working on K9N Neo V3

A new problem with MSI K9N Neo V3 MB...
I just found out that Front audio panel is not working (no mic, no line out). I checked the cable 3 times. Seems to be OK. Front panel was working on a previous ASUS motherboard.
- All drivers according to vista are working fine.
- Back panel sound (eveything) is working fine.
- Sound panel says that front panel mic & line-out are not plugged in.
Is there a switch to turn this on? Or maybe some special driver?
Or it is just useless, and working on MB package advertisment only?

Quote from: Richard on 13-January-08, 06:50:13
P.S. Just a thought, I could go get a Ouija Board or Dart Board if you prefer. Might yield some answers.
You sure are funny. No doubt about that.
I do appreciate a good laugh, but in this case laughter won't solve my problem.
This little analogy with a car and a tire is just ridiculous. You know, tire is flat or it is not. Or is it maybe flat only on BMW cars?
I see no purpose in describing cables here, but if this is what would make you happy... It happens that I have few spare mintues, so here we go.
chapter 1. - The Case
I do not know what brand is my case. It's a cheap case with expensive Corsair 550W PSU. Very well cooled. I also don't know what is its name, so let us just call it George.
Here is George roaring on my desk;
Chapter 2. - Jimmy & Gina
This is an unknown brand, no name Front panel cable so let's just call it One eyed Jimmy;
This is local one tooth missing whore called Gina;
Chapter 3. - Encounter 1
Jimmy fills Gina just right. It's very tight but just right;
Chapter 4. - Berta, Gertruda and Mike
Dirty Twins Berta and Gertruda are ready to recieve some massive waves;
Big Mike is ready to give:
Chapter 5. - Encounter 2
It fits right again:
Chapter 6. - Oh NO!!!
It's not working on MSI AGAIN:

Audio Jack not working on iPhone 6 plus

I have had my Iphone for about 4 days now and just the other day I found out that my audio jack does not work. I plugged my headphones in and instead of the music playing through the headphones it just continues to play through my speakers. I have tried several different headphones and I have even tried plugging an AUX cord into it while I was in my car and still nothing. Has anyone else encountered this same issue and if so have you found a way to fix it? Or is this something that I need to fix by taking it to my local apple store?

Given that it is practically out of the box, you should take it in and make it Apple's problem. They should fix it, replace it or refund you for a new one that works.

HP HDX 18t Audio jacks not working

Hello community,
the audio jacks aren't working on my HDX 18t 1200. headphoens don't work and neither does connecting speakers. What can i do?
Thank you,
Thomas

Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Shutdown the laptop.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
5-Try to install using the downloaded file.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

MSI P35 Realtek HD sound driver not working

I am unable to reinstall the driver nor uninstall it.. The nividia VGA GTS 8800 works great and the LAN works, except HD Audio not working.
Good thing I got creative sound card and 1 available PCI slot to install it..

O my P965 Plat I could not install a new version of the driver nor uninstall the old version. Never figured out why but I keep restoring images getting progressively older and found one I was able to uninstall the old driver and then install the new driver.

Headphone and other audio jacks not working on msi GT 70

I was wondering if anyone could tell me why the headphone jack isn't working properly on my new laptop. When I plug them in it only works in one ear and the onboard speakers still play. Also nothing pops up from realtek when I plug them in. I have already tried uninstalling and reinstalling the newest version of realtek.
I have been having a heck of a time with the graphics cards. It will not default to the Nvidia GTX 670MX when I am in a program such as adobe premiere pro or photoshop. I went into Nvidia and changed the certain programs that I wanted to run the Nvidia card - still wont run off of it. I changed the global setting to Nvidia - still nothing. Finally I just disabled the intel driver in the device manager. It works fine now except exported video is very glitchy on the players. It plays the videos fine when I enable the intel driver again.
I guess I can live with the graphics card problems, but can't live without the headphones working. Any help is greatly appreciated
Thanks

be sure everybody has same problem https://forum-en.msi.com/index.php?topic=180629.0 or https://forum-en.msi.com/index.php?topic=180690.0 I found a way if you had new nvidia driver delete nvidia sound driver after delete your msi sound driver after reboot , install your msi sound driver it will be normal but if not try first msi driver after nvidia with beta or new sound driver if still not use realtek new drivers but dont forget delete nvidia sound driver , but you should always repeat it , msi couldnt fix this problem just offer to use old driver and old nvidia driver

Rear Audio Jack not Working on New Mac Pro

Hello All,
Here's the deal. I just pursuaded my company to buy a brand new Mac Pro to run FCP Studio 2 as a test run to see if they perform well enough to eventually replace our remaining PC's. We've had the Mac Pro for less then two weeks and I'm running into an issue that I can't resolve, and I don't want to fall on my face. The rear Audio input jack keeps failing. Meaning sometimes it works and sometimes it doesn't when speakers are plugged into. The jack on the front works fine, but the rear jack doesn't appear to recognize the speakers after the computer is shut down then restarted. You have to restart the computer 2 or 3 times before the speakers start pumping out sound. Which in all honesty is extermely dissappointing to me. And if I have to bring this thing in to get serviced, my boss will not move forward with buying anymore Mac Pro's, which I'm working hard to make happen.
Please help me out.
Thank you all for your time

Try resetting the SMC: http://support.apple.com/kb/HT1806?viewlocale=en_US.
Also try resetting the PRAM: http://support.apple.com/kb/HT1379.

Built In Audio jack not working for Guitar

I'm using Garageband 6.0.2 with my new MacBook Pro. I have a guitar plugged into my amp, and from my amp into the audio input jack on the MBP. I have the settings set to use the Built-In Input, but it doesn't pick up any sound from my guitar when I play; it's using the built-in microphone instead. (and yes, I'm using the Electric Guitar Track). All my cables are good, my amp is good, I've tried multiple different settings to make sure I'm not overlooking anything, and everything's fine until I try to get some sort of signal from the Built-In Input. It just insists on using the microphone.
I've succesfully used Garageband plenty on my last MacBook Pro, but this one just doesn't seem to want to cooperate. Can anyone please help troubleshoot this?

I am using GarageBand 5.1, but this should work with newer versions.
I recently put together a simple Garageband electric guitar setup. Here are the steps that I took to use the audio input jack.
Required Materials:
Guitar
1/4" to 1/8" cable (Adapter acceptable)
Macbook
Headphones or External Speaker
First, plug in the headphones or external speakers. This will prevent any unwanted audio feedback, which could damage your macbook.
Next, open system preferences and navigate to the Sound preference pane. Command+Space "Sound" should get you there.
1.) Click the input tab and you should see two options: Internal Microphone and Line In. Click Line In.
2.) Plug your guitar into the audio line in jack on your Macbook. You should see the Input Level jump when you plug in your guitar. Strum normally and adjust the input level. I turned it all the way up for my acoustic-electric guitar, but if you have an electric guitar with good pickups, you may have to turn it down.
3.) Open GarageBand and select "New Project" subcategory "Electric Guitar".
This is the extent of the information that I was able to aquire through Apple GarageBand documentation. Everything that follows is either third-party or trial and error.
4.) Open GarageBand system preferences (Command+ , ). Open the second tab labeled "Audio/MIDI".
The first two settings are "Audio Output:" and "Audio Input:".
Changing both of these options manually to "Built-In Output" and "Built-In Input" guarantees that you will be able to record and modify audio from your guitar and hear it live. Clicking "Optimize for Minimum Delay" is useful if you want to hear your guitar with effects with minimum lag.
I have experimented with changing these settings with limited success. If you learn anything new please contact me on my profile.
An Apple a Day...
Doctah Wilson

Audio jack not working when cover closed and hdmi connected

Pavillion Sleekbook 14 (14-b017cl)
Windows 8
I have an external monitor connected via the hdmi port. My external monitor does not have built in speakers. I connect an external speaker via the headphone jack. I can play audio fine if the notebook cover is open. As soon as I close the notebook cover, the audio stops. How can I get the audio to still be sent to my external speakers with the cover closed?
I have my power settings set to "Do Nothing" when lid is closed. I don't know what else to try?
Thanks for your help.

What is the status of the TV when the lid is closed? Does the image remain as it should?
Try installing this audio driver as it was released after the launch of Windows 8.
What program is playing the audio? For example, a music player or movie program? Is there no audio in any program when this happens?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My Hp Laptop audio jack not working...!

Hi Frendz,
When ever i detach my head phones or ear phones in my laptop the audio got muted. I tried all my sound settings ...it working fine without head phones...but when i put header phones and i like to remove my head phones...the loptop got mute,....i am totally fedup ...kindly suggest any solution for the same....
thax....!

Hello Ashad,
What is your product number and operating system?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

P35 neo front sound issue

i have purchased a bundel p35 neo with a duel core e6750 .
did all the cabel and computer worked apart from no front sound or mic .rear panel works fine.
any ideas please as it doing me head in .even tryed the fixed driver fro msi site still no joy
o/s vista 32
4 gig ram
8800 gts 640mb

I'm having the same problem.Rear panel works fine but front panel does not.I tried disabling Jack Detection but ma front panel just not working...When i plug my head phone to rear panel it works fine.Problem is with the front panel.
Plz someone help me
Motherboard type and model (MSI P35 NEO)
-Bios type and revision (AMI rev 1.9)
-CPU type and model (Intel core 2 duo E6750. 2.6 GHZ)
-Video card name and model plus drivers and version (MSI GeForce 7300LE)
-Power Supply DeLUX ATX-450W p4
-Hard Drives:160GB Samsung Sata
-Optical Drives: Asus lightscribe DVD WRITER

Problem with my MSI P35 Neo MotherBoard [Cannot find harddrive]

Hi guys.
So, I've been trying to install Archlinux for a while now, and I've been trying to figure out what problem Is by myself, and I've been asking a bunch of people, but it seems that it's going to a dead end.
What we figured out, and what we "think" it is, is that the controller on my motherboard does not support the system, and my SATA disk that I am trying to install on.
What i have tried is that.. I've followed the "beginners guide" to install arch linux, and when i noticed that i got a big problem with my harddrive i asked some people for help, tough we cannot figure out what the problem is..
Firstly i boot up with my ArchLinux CD.. Then i write km, to change the keyboard layout. Then /arch/setup ofcourse . After that when i try to partitionate and set mountpoints for filsystem it does not show any kind of hardware at all. So i tried to partitionate with gparted and then boot up with Archlinux again to install all my packages etc etc. But it seems like it does not write the information to anything.
This is a big problem for me cause i really want my Arch distribution to work, so please guys.. Help me!
EDIT
Just in case you wanted to know.. My motherboard is a MSI P35 Neo
Last edited by rahanjam (2008-10-07 14:03:35)

pointone wrote:*snip*
I don't have this AHCI option. So i don't know what to do else. Do you know?
AD28 wrote:*snip*
Do you mean, that my mobo doesent support linux, and that i cannot have it?

Msi p35 neo Front Audio Jacks Not Working

Similar Messages

Maybe you are looking for