MSI P35 NEO - USB ports stop working when Windows starts loading

I've just replaced the MB, CPU, RAM sticks, video card and PSU after the previous MB died on me last week. The problem I've been having is that my mouse and keyboard (they're both USB) stop working as soon as Windows starts loading. They're both functioning during the boot sequence. USB controllers and USB Legacy Support are both enabled in BIOS. I've tried plugging in my old ps/2 keyboard but that one won't work either once Windows has started loading (although it just struck me that it's possible I accidentally plugged it into the mouse port). Any advice on how to resolve this issue would be greatly appreciated.

Quote from: Nidhogg on 28-February-08, 03:29:28
I've just replaced the MB, CPU, RAM sticks, video card and PSU after the previous MB died on me last week. The problem I've been having is that my mouse and keyboard (they're both USB) stop working as soon as Windows starts loading. They're both functioning during the boot sequence. USB controllers and USB Legacy Support are both enabled in BIOS. I've tried plugging in my old ps/2 keyboard but that one won't work either once Windows has started loading (although it just struck me that it's possible I accidentally plugged it into the mouse port). Any advice on how to resolve this issue would be greatly appreciated.
Was old mainboard that "died" on you same as the new mainboard?

Similar Messages

USB ports stop working after windows 7 installation via USB Boot camp

topend macbook pro retina 15 model purchased in Jan 2014 ,upto date.OS X 10.9.1
tried installing windows 7 ultimate through boot camp using USB. the installation is fine and smooth. windows 7 ultimate is properly installed but the point where you install the support software through USB all the USB ports die out just before logging in into windows. Also a red light on the headphone jack goes on. NO USB flash drive orUSB device is operational or in other words detected by the mac. Hence neither can I finish the support software installation which has all the necessary drivers nor connect to the internet . tried the SMC/NVRAM reset as instructed by the apple support but no change in the situation.
USB ports fully operational when boot in MAC os .
Another problem I face is when I try connect my iphone 4S to macbook pro via USB it keeps connecting and disconnecting and makes the charging sound repeatedly . The same iphone can connect to other laptops flawlessly.
please help .
Thanks

Since you just bought it, you may want to make a Genius Bar appointment and let them diagnose the issue. Use your warranty. Bring your phone and cable along too.

USB ports stopped working on Windows 7

I have a Pavilion dv6-6c57nr and recently the usb ports on the left side of the machine stopped working. Looking at device manager, it says the Fresco Logic USB hub does not have a driver loaded. When I try to use the troubleshooter, the program says that the driver did not install correctly. What am I doing wrong?

Hi:
Try uninstalling the device in the device manager, check the uninstall driver box, reboot and reinstall the driver from your notebook's support and driver page.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102204-2&cc=us&dlc=en&lc=en...

Usb ports stopped working after windows 7 install - pavilion g6-1001sa

After reinstalling windows - My usb ports have completely stopped working - not recognised at all - These happened previously and I was able to download and install a driver which worked - I have been unable to find it this time
thanks
JO
Please help

teethinnit wrote:
I had tried here - the correct driver was not here - it is the USB controller that I am looking for
Ok go to your search bar and type "Change Device installation settings"
and look at my screen shot and this change should make it look for the latest driver.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. WHen we plugged it into the port on the keyboard, the device works. Why?

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. When we plugged it into the port on the keyboard, the device works. Why? Obviously the device is operational. Could the USB port have burned out from having too much power drawn? If so, is it reparable?

It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

One usb port stopped working today

One of my USB ports stopped working today. I think it may be related to Itunes update today. Has anyone else seen this recently? I restarted my computer - but that didn't help. I have a MacBook Pro - running Lion 10.7.5
Any suggestions? I saw one USB Hub when I went to Apple --> About this Mac, but couldn't tell if both were there.

http://www.ehow.com/how_7351075_reset-usb-ports-mac-laptops.html

Left USB port only works when entering BIOS

Hi all -- I have a Toshiba Satellite C855D-S5106, the LEFT USB port only works when I enter the BIOS at boot-time. If I disconnect the drive, i.e. eject it and then remove it, the port stops working. The other two ports at the right work fine. I've tested this with known good flash drives and Kensington USB trackball that work fine on four other computers, and the other two USB ports. I'm thinking its software/BIOS because hardware would fail intermittently, I could not get the port to work if there was a failing connection. As stated, this work-around succeeds EVERY time. I have not upgraded the bios. Has anyone had this problem?

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

USB Ports stopped working - Vista Home Premium (32bit)

I reloaded Windows Mobile Device Center yesterday. When I got home and booted my computer, all 3 USB Ports and the card reader do not work. There is power, but no use of the device. I have read several help posts on this and I have attempted to fix without success. The one thing I keep reading is the USB Root Hub. I do not have this in my device manager. I have uninstalled all of the Universal USB Controllers in attempt to allow Windows to install the drivers. I am getting a Code 39 error and it says the system cannot locate the preconfigured driver folders. I cannot use a mouse, printer, or sync my phone without the use of my USB Ports. Can anyone please help me?
Terah

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

HP Pavilion dv6 All 4 USB ports stopped working

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
Could anyone offer a solution or suggestion, please?

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

1 of 2 USB ports stopped working after 10.7.2 upgrade

I have the newest Macbook Pro. I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working.   Thought it may be the cable, so I switched cables. Tried plugging in my iPhone, my portable drive and nothing.   Both work on the other port though.   Both ports worked fine before the update.
I've rebooted 4x.
Suggestions?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Brand new Macbook pro one USB port stopped working

Brand new Macbook Pro 15 with Retina display. One of the USB ports stopped working after 24hours.

Serial Port Configuration and Port definition is reset by
NVRAM http://support.apple.com/kb/ht1379
If no good I would return the machine ASAP:
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

HT1379 MacBook Pro USB port stopped working

USB port stopped working....
How can I diagnose my USB port to test for hardware or software problem

Try Resetting the System Management Controller (SMC)

USB ports stopped working in my Macbook Pro

USB ports stopped working in my Macbook Pro

I do not know anything about audio consoles nor do I have an iPhone.
My iPod also does not show on the desktop but it is recognized in iTunes, Check if that is the case for your MBP.
Do you have the appropriate boxes checked in Finder Preferences?
See if this support article is of any assistance:
http://support.apple.com/kb/TS1410
If you have an external HDD, connect it to your MBP and see if it is recognized. If it does not show on the desktop, check Disk Utility.
Have you tried all USB ports? It could be that the problem lies in your MBP.
Ciao.

My USB ports stopped working. So did my dvd drive. I have a Pavillion Laptop. Model 1245dx.

My USB ports stopped working. Do did my DVD drive. I did do a Windows update yesterday. Any ideas out there? I can't use my mouse or printer. Help!

Try a windows system restore, pick a date before the windows updates were installed.

I have a Pavillion dvd Model 1245dx. USB ports stopped working. How can I fix this?

My USB ports stopped working. So did my DVD drive. Any ideas how to fix this?

Back up all data before proceeding.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time ▹ Time Zone
Check the box marked
          Set time zone automatically using current location
if it's not already checked. If the box is checked, uncheck it and then check it again. Test.
If the correct location and time zone aren't shown in the preference pane, then either Wi-Fi is turned off, or you're not within range of a network in the Location Services database. Under those conditions, the computer can't determine your location.
Credit for this idea to ASC member Easyas314.
Step 2
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.Maps
Right-click or control-click the line and select
         Services ▹ Reveal in Finder
from the contextual menu.* A Finder window should open with a folder named "com.apple.Maps" selected. Quit the application if it's running. Move the folder to the Desktop, leaving the window open. Relaunch the application and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the folder you moved. The list of recent places displayed in Maps will be lost.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

MSI P35 NEO - USB ports stop working when Windows starts loading

Similar Messages

Maybe you are looking for