MSI P35 NEO2 FR Processor Support issue

Hi,
I am really in love with the P35 Neo2 FR and I really want to buy it, but I have a small doubt. I actually have an Intel P4 3E GHz Prescott (FSB 800,L2 Cache 1MB) which I am somehow forced to keep from my old system because I don't have enough money to buy a new one right now. I am changing all my components except the processor. I have checked the CPU Support chart and my processor is UNDER TESTING  . It's not a firm NO as for those with lower FSBs, so I guess there is something.
Should I buy this board to use it a few more months with my old CPU? Will it work properly? Please help me 
Thank you in advance,

I can't really advise on this as I do not have this combination, however, you can email MSI for more information.
>>How to contact MSI.<<

Similar Messages

  • MSI P35 Neo2-FR Internet Connect Issue

    I have a new setup with the items in my sig.  I am connected straight to the internet no firewall up or antivirus of any kind, and i am able to browse the web with my web browsers IE and Firefox, i can download anything and can view any site there is to view, however, i am unable to connect to anything else web related.   For example i cannot connect to AIM through the AIM client.  I cannot connect to any poker clients, Full Tilt, Pokerstars, none of them.  I was able to download and install the items just fine, even when i open the programs they connect to the servers to update the programs, but when i try to login to anything it denys me. Any help would be really appreciated.

    Quote from: duranzo on 19-March-08, 14:01:58
    Connected to TimeWarner cable through just regular Cable Modem and ethernet cable, no router. By date and time set correctly do you mean in Windows or in the BIOS
    In Windows.
    Instant messaging services usually use certificates that need the client and server times to be synchronized. Setting the time a year backwards, restarting, setting it back to the current date, and restarting once again usually solves the problem.

  • Need Help with ESATA on MSI P35 Neo2-FR

    I have the MSI P35 Neo2-FR motherboard http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=1261 and trying to get the eternal ESATA to work.  It works with one individual HD.  I'm using an external ESATA drive with 3 HD inside the external case with one cable running into the external ESATA in the back of the motherboard.  It's only recognizing 1 drive and the other 2 isn't showing up.  If I switch it to USB connection it will read all 3 drives.  I'm running windows 7 x64 but it recognize on my other 2 computers with a different motherboard. I have install it with the ACHI setup in Bios and I've also install the Matrix Storage Controller after installation.  I never install the Intel ICH9R SATA RAID driver where you have to press the F6 to install it.  Is that what I'm missing and is taht needed for the ESATA to work?    I'm getting this message "A storage device was connected. If this device is a port multiplier, only port 0 of the port multiplier will be active." Been googling all day and still can't figure out what I'm missing.
    Any help would greatly be appreciated.

    Quote
    For some reason this board is Bios only have IDE, RAID and ACHI and I don't see a SATA.
    IDE, RAID and AHCI are operating modes of the SATA Controller.  Everything okay here.
    Quote
    Seems to me it's either this board and it's driver don't let you use the port multiplier but it suppose to support port multiplier.
    It is neither the board, nor is it the driver.  It is a limitation of the Intel ICH9R Chipset.  You will have the same problem on all P35/ICH9R based mainboards.  Read here:
    http://xtreview.com/addcomment-id-788-view-intel-technology-matrix-RAID-and-port--multiplier.html
    Quote
    Unfortunately, used in the south bridges ICH9R the version of such technology provides access only to one hard disk at the specific moment of time. . The technology became more complex to realize , which implies to several access disks simultaneously, possesses higher cost and more higher central processor loads , therefore it can be rejected.
    Here is the same problem on a Gigabyte GA-P35-DQ6:
    http://forums.overclockers.co.uk/showthread.php?p=11892094
    Nothing you can do about it.

  • MSI P35 Neo2-Fr -- can't get onboard audio device to appear in XP

    I've just installed XP sp3 onto my new mobo (MSI P35 Neo2-Fr).
    Attached is Q6600 core2 quad processor, 2GB memory (DDR2), ATI HD4850 gfx card. I haven't changed the bios much at all or overclocked anything yet.
    All seems fine *except* that I can't windows XP to see that there's an onboard audio device.
    (It is enabled in the bios btw.) I've tried installing the high def audio driver on the CD from mobo box, and also downloaded the latest from the MSI site. I uninstall the driver and reboot before trying to reinstall it again btw.
    The audio driver installer used to say there was a problem installing the driver, but it doesn't any more. After installing it and rebooting, XP control panel -> Audio devices says there are no audio devices.
    Also, I notice that there should be an extra audio item in the XP control panel (according to mobo manual), but this hasn't appeared.
    In XP's system hardware list there are no sound devices under Sound, but there are two unknown PCI devices (with yellow question marks next to them).
    Any suggestions?
     

    Quote from: Del UK on 05-September-08, 05:13:05
    Had same issue with ATI card installed.
    Go to Microsoft update and choose custom
    You should see a list with hardware updates..........
    After that, all will be fine
    Hi there
    Thanks for your reply. I went to MS updates, didn't see any in custom about hardware (apart from updated ethernet driver). Installed all updates anyway. And the problem remains...

  • Installing MSI P35 Neo2-FR

    Hello
    I'm installing Q6600 on my MSI P35 Neo2-FR mainboard. In the user guide it says (2-3, 2-4):
    - "Make sure that you apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation"
    - "Remember to apply some thermal paste on it for better heat dispersion"
    - "Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion."
    I'm feeling less confident in installing my Q6600 now without this thermal paste, since it's explicitly *recommended* in the guide. What would happen if I did not apply the paste?

    Quote
    What would happen if I did not apply the paste?
    The heat the processor generates would not be properly dissipated to the heatsink.  In a worst case scenario your CPU could shutdown automatically because of overheating and/or be damaged.
    Have a look at your heatsink itself.  Often thermal paste or some sort of thermal pad is pre-applied for easier installation.
    If there is not such thing get some thermal paste before you install CPU+heatsink.

  • Msi p35 neo2 fr motherboard - system freezes

    Hello , I just bought a Msi p35 neo2 fr motherboard and I have this problem . My system randomly freezes ,no errors ,no blue
    screens  and I have to restart it . I tried each module of ram separately and I got the same problem .
    The video card worked fine on my old system and I don`t think this could be . Also the standby led (led 3 ) is always on and red
    Maybe I messed up the " wire up "  . I could use some tips about how to properly wire up and which settings should be done in BIos for my configuration ?
    Msi p35 neo2 fr
    PSU Sirtec HPC-430-P12S V2.2
    2x1 gb Geil pc6400 800 mhz
    video geforce 6200 128 mb
    hdd sata 120 gb

    from the User Manual:
    Quote
    Spread Spectrum
    When the motherboard’s clock generator pulses, the extreme values (spikes) of the
    pulses creates EMI (Electromagnetic Interference). The Spread Spectrum function
    reduces the EMI generated by modulating the pulses so that the spikes of the pulses
    are reduced to flatter curves. If you do not have any EMI problem, leave the setting at
    [Disabled] for optimal system stability and performance. But if you are plagued by EMI,
    select the desired range for EMI reduction. Remember to disable Spread Spectrum
    function if you are overclocking, because even a slight jitter can introduce a temporary
    boost in clock speed which may just cause your overclocked processor to lock
    up."

  • Have MSI P35 Neo2-FR mobo, want 8GB RAM (4x2GB), anybody knows compatible ram?

    I have MSI P35 Neo2-FR motherboard and want to buy 8GB ram, preferably 4x2GB(2x2GB + 2x2GB). Anybody has such a setup and can recomend some RAM?
    I dont want to buy some random ram, because the motherboards are very picky when youn install the maximum supported ram.

    Crucial tend to have quite compatible RAM across boards. On their site you can enter your motherboard model to find the RAM that is compatible. A gave it a run and the following is compatible:
    Part #: CT2KIT25664AA667 • DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64
    Part #: CT2KIT25664AA800 • DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64
    Part #: CT2KIT25664AA1067 • DDR2 PC2-8500 • CL=7 • Unbuffered • NON-ECC • DDR2-1066 • 1.8V • 256Meg x 64
    Part #: BL2KIT25664AA80A • DDR2 PC2-6400 • 4-4-4-12 • Unbuffered • NON-ECC • DDR2-800 • 2.0V • 256Meg x 64
    Part #: BL2KIT25664AL80A • DDR2 PC2-6400 • 4-4-4-12 • Unbuffered • NON-ECC • DDR2-800 • 2.0V • 256Meg x 64
    Part #: BL2KIT25664AR80A • DDR2 PC2-6400 • 4-4-4-12 • Unbuffered • NON-ECC • DDR2-800 • 2.0V • 256Meg x 64
    The above are all 4GB kits so obviously you'd need to buy two packs to get the 8GB.
    http://www.crucial.com/uk/store/listparts.aspx?model=P35%20Neo2-FR/FIR
    You do need a 64-bit OS to access the full 4GB or 8GB so also bear that in mind.

  • Msi p35 neo2-fr disable EIST in bios

    hello !
    My name is Adrian. My system spec.:
    msi p35 neo2-fr (bios ver.1.A),
    CPU core 2 duo E8400 C0
    mem. dual chanel kit 2x2GB geil pristine ddr2 800
    2x250 hdd western digital WD2500YS
    Video Gigabyte GV-NX88T512HP 8800GT 512 DDR3
    Sound Creative Sound Blaster Audigy SE
    PSU Chieftec 450W 2x12v: 36 amp., 5v: 25 amp.
    OS dual boot windows xp sp3 and windows vista sp2
    My problem is when i disable EIST in bios Vista gives me a blue screen (0x0000007F) on boot and XP restarts without any error.
    Any idea ? Thank you anticipated !

    Quote from: pristine on 11-August-09, 12:31:07
    I want to overclock and i want to change the multiplier to make some tests ! And i can`t do that without EIST DISABLED !
    OK, stay calm.  Getting frustrated is only going to make people not reply.
    I'm not sure why disabling EIST is giving you a BSOD.  I don't think anyone has any ideas since you have no real replies.
    A kernel trap is hardware failure usually.  Makes me think when you disable EIST, the machine becomes unstable.   Are you setting the default multiplier for your processor?  Hell, we don't even know what it is.  How about you list your rig specs?
    Just to add:  Overclocking with EIST enabled is pretty much the same.  You save power, so I don't know why you'd want to turn it off, in all honesty.

  • E8200 Retail with MSI P35 Neo2-FR :

    Thought of sharing with the guys here.
    Test Setup :
    E8200 w/Intel default cooler.
    Msi P35 Neo2-Fr Bios v1.1/1.81b
    Corsair 6400C4DHX 2GB
    Msi 8800GT 512Mb -OC Edition(Red Juliet)
    Hitachi 160Gb sata
    Acbel iGold 550w
    Neo2/platinum Users take note.
    If you are on any bios earlier than v1.6.
    Do not worry, it will still boot and run fine.
    You can always flash the bios later.
    Here are results for coolalar.com using E8400 with P35 Neo2-Fr :
    http://www.coolaler.com/forum/showthread.php?t=170745
    Here's ours, but E8200.
    Bios 1.1 works too.
    Here are some default results of the processor :
    We flashed to Bios v1.81b :
    3Dmark06 : Higher cpu score
    Cinebench r10 :

    Pumped up some video clocks and slightly higher fsb.
    511x8, 1.5v
    3Dmark06 :
    A final validation :
    http://valid.x86-secret.com/show_oc.php?id=297680
    The 6Mb is nice to have.
    But if you are already using an E6750, don't think you will see much difference.
    For low volts and operating temperatures,
    The 45nm is good.
    Ours is good at 3.6Ghz @ 1.25v(bios).
    Neo2 users with more results can share here.
    http://forums.hardwarezone.com/showthread.php?p=26181870
    Cheers! :D

  • MSI P35 Neo2-FR - Will this work??

    Hi,
    I am planning a new system, after my current one is a little dated. Here is an outline of what I am planning to build: -
    CPU - Intel Core2 Quad Q6600 2.4GHz SLACR G0
    M/B - MSI P35 Neo2-FR
    RAM - Ballistix DDR2 PC2-8500 5-5-5-15 Unbuffered NON-ECC (4x 1GB)
    G/C - INNO3D GeForce 7300GT 256MB DDR2 PCI-E
    I am not needing it for gaming, but more for production work (Graphic design, Illustration and video editing).
    I have a few questions if anyone can answer them for me?
    Is the RAID facility on board a hardware RAID or software RAID. Since its provided by the Northbridge I am pressuming its software.
    How many SATA ports can be used at any one time. For example, does using the 2x eSATA ports, reduce the amount of on board ports you can use? (Like some USB ports?).
    If I wanted to use a SATA DVDRW connected to the southbridge SATA port, would I be able to boot from it?
    I can see many people have had problems with installing Vista on this board, can anyone see any compatability issues with my proposed setup?
    Many thanks!!!
    Phil

    Quote from: Hans Gruber on 28-November-07, 19:07:02
    The only compatability issue would be with your 7300gt card. That's hardly enough power to run a game let alone graphics editing. You would be much better served with an 8800gt to perform video editing.
    Hi Hans, the 7300 is the same card used in the Mac G5's used in my place of employment for graphic design / video editing. Although some have the 8800GT as well, this is the card used in the majority of the machines. I am sure it will be ok but you reassured one of my existing concerns. I can always upgrade this if it doesnt cut the grain!
    Thankyou!!!
    Quote from: Maesus on 28-November-07, 19:33:33
    Please spend some time to read the moan guide if you haven't.
    Yeah not much on there with regards to my post. Cheers but I did read it before I posted.
    Quote from: Maesus on 28-November-07, 19:33:33
    0. All of your answers are here: http://global.msi.com.tw/index.php?func=proddesc&prod_no=1261&maincat_no=1&cat2_no=170 you just need to read line by line and you shouldn't miss the answers.
    was already a bookmark in my browser as I have been researching it for a while now. Just wanted clarification on a few things hence my post.
    Quote from: Maesus on 28-November-07, 19:33:33
    1. It's ICH9 RAID. It's southbridge, not northbridge. It's hardware RAID.
    ICH9 provides a RAID facility is software RAID using Intel Matrix Storage Manager. The CPU processes the parity for RAID 5.
    Quote from: Maesus on 28-November-07, 19:33:33
    2. you can max up the SATA ports. How many is on this board? 6 SATA ports? you can use them all.
    There are 2x eSATA ports (I am pressuming from the ICH9), and 4x SATA on the ICH9, and 1x SATA on the 88SE6111. What I was trying to ask is do the 2x eSATA ports render 2 of the ICH9 ports unavailable?
    Quote from: Maesus on 28-November-07, 19:33:33
    2a. USB ports does NOT reduce the total amount of USB ports to use, where did you get that info or having that impression??
    I worded this completely wrong. My bad..... I have had motherboards before where if you connect a usb back plane to the USB header on the main board, it simply stops you using some of the USB's on the rear panel. This is simply like a redirect to allow you to plug USB devices in to the front of your PC case instead of reaching around the back for it rather than allowing you to add additional ports. This is what I was trying to ask, If I am to use the 2x eSATA ports does that mean that it renders 2x of my onboard SATA ports obselete.
    Quote from: Maesus on 28-November-07, 19:33:33
    3. Yes
    Thankyou 
    Quote from: Maesus on 28-November-07, 19:33:33
    4. it's not really compatibility issue, but more of Vista's own issue, just that you need to do the right step to get Vista installed. Quad Core + 4GB, well, microsoft acknowledge the Vista installation issues with this config. You will need Vista 64-bit, but start installing with 1GB or 2GB. After completing installation, install microsoft quad core and 4GB patches, then only plug in the remaining 2GB.
    Thankyou 

  • Msi p35 neo2 fr problem

    Alright, I have been using this board for quite sometime and today it gives me problem.
    When i tried to boot up this morning, the board just keeps on restarting. This happened once b4 but the problem solved after I pressed on the reset button on the board.
    whereas for today, after resetting, the board did stop restarting itself, but it hangs when the LED is at (red, red, green, red)from top to bottom. I refered to the user guide and it shows that there is a problem during memory detection.
    Can anyone pls help?
    This is what I have
    Mobo: MSI P35 Neo2-FR
    CPU: Intel Core 2 Duo E6750 2.66 1333mhz/4mb
    RAM: Kingston Hyperx 2x2GB DDR2-800
    Video Card: Nvidia Geforce 8500GT
    HDD: 1xHitachi Deskstar 1TB SATA 3.0gb/s, 1 Samsung 160GB(SATA), 1 Seagate IDE 80GB(IDE)
    OS: Microsoft Windows Vista Ultimate SP2
    PSU: AcBell 400W DC Output (There are a few of them.. didnt know which one.. the highest is 28Amps)

    Okay.  About the memory issue:  I believe a BIOS Update to the latest version may fix the problem with your DDR2-800 modules.  BIOS v1.2, v1.3 and v1.4 had known problems with DDR2-800 modules. In case you decide to do that, please >>Use the MSI HQ Forum USB flasher<< and avoid MSI Live Update or any other Windows based flasher.
    About the video card:  I is not necessarely defective.  Your PSU is not only a low-end poor quality device but also rather weak in the first place.  Try a stronger one with your original video card and see if that changes anything.

  • MSI P35 Neo2-FR and GeForce 8800GT?

    Hello,
    I am interested in buying MSI P35 Neo2-FR motherboard, and also the latest GeForce 8800GT. But after doing some research I notice that many people have having problems installing their 8800GT card into motherboards with a PCI-E 1.0a slots, and the Neo2-FR has 1.0a slots! However there seem to be exceptions, some motherboards with 1.0a slots work with 8800GT!
    This is all very confusing 
    Can anyone verify that MSI P35 Neo2-FR motherboard and GeForce 8800GT (With PCI-E 2.0!) works in the 1.0a slot??
    Thank you.

    According to many sources, both personal and documentary, PCI-e 2.0 cards will work in PCI-e 1.X slots(Wikipedia is not exactly what I would consider a super source). Here's a more official source, PCI-SIG.
    http://www.pcisig.com/news_room/faqs/pcie2.0_faq/
    Quote from: PCI-SIG
    Q4: It sounds as if both speed grades are supported in the PCIe 2.0 specification?
    A4: The PCIe Base 2.0 specification supports both 2.5GT/s and 5GT/s signaling rates, in order to retain backward compatibility with existing PCIe 1.0 and 1.1 systems. Aside from the faster bit rate, there are a number of improvements in this new specification that allow greater flexibility and reliability in designing PCIe links. For example, the interconnect can be dynamically managed for platform power and performance considerations through software controls. Another significant RAS feature is the inclusion of new controls to allow a PCIe link to continue to function even when some lanes become non-operational.
    Q5: Then PCIe 2.0 must be backward compatible with PCIe 1.1 and 1.0?
    A5: Yes. The PCIe Base 2.0 specification supports both the 2.5GT/s and 5GT/s signaling technologies. A device designed to the PCIe Base 2.0 specification may support 2.5GT/s, 5GT/s or both. However, a device designed to operate specifically at 5GT/s must also support 2.5GT/s signaling. The PCIe Base specification covers chip-to-chip topologies on the system board. For I/O extensibility across PCIe connectors, the Card Electromechanical (CEM) and ExpressModule™ specifications will also need to be updated, but this work will not impact mechanical compatibility of the slots, cards or modules. Currently, the PCI-SIG is defining the PCIe CEM 2.0 specification which has been released to members for review at v0.5. There are currently no plans to adapt the PCIe Mini CEM specification for the faster bit rate as the market need has not yet materialized.
    Quote from: >>About PCI-SIG<<
    Formed in 1992, PCI-SIG (originally formed as the Peripheral Component Interconnect Special Interest Group) is the industry organization chartered with the development and management of the PCI bus specification, the industry standard for a high-performance I/O interconnect to transfer data between a CPU and its peripherals. As part of that charter, the organization aims to do the following:
    Support new requirements
    Preserve backward compatibility for all PCI revisions
    Maintain the specification as an easy-to-implement, stable technology
    Contribute to the technical longevity of PCI
    Support the establishment of PCI as an industry-wide standard

  • Msi p35 neo2 fr memory

    I want to buy a msi p35 neo2 fr and a e2180 processors and i saw that on msi's memory list for this mobo there isn't any DDR II 800 mentioned for processors with 800 Mhz FSB .This means that the mobo doesn't work with DDR II 800 and a processor with 800 MHz FSB ?

    it does work with DDR2 800 and 800mhz fsb.

  • Overclocking q9300 on MSI P35 Neo2-FR

    Hi there, 
    I'm after a bit of advice on overclocking my processor.
    I've got a Msi P35 Neo2-FR motherboard, Corsair 4GB (2x2GB) PC2-6400 XMS2 DHX (4-4-4-12) Memory, a 650w power supply and a Quad core Q9300.
    My aim is to overclock the q9300 to 3ghz. Could you please give me info on what settings you'd set the following to.
    cpu voltage,
    vtt fsb voltage,
    nb voltage,
    sb I/O power,
    sb core power,
    Thanks for any help. I'm just worried that I use the wrong setting resulting in a mini nuclear explosion. 

    Look here: http://global.msi.com.tw/index.php?func=techexpressdesc2&express_no=52&page=2

  • MSI P35 NEO2-FIR, Traces of fire...

    Hello,
    During dust cleanup of my PC. I noticed a burned part of my MSI P35 Neo2-FIR mobo, i wonder if it is still save to use now, maybe someone have any idea what does that 'chip?' is responsible for ?
    Photos:

     It looks like it's a resistor in the +5V power circuit to JUSB1. Must have been something plugged into it at one time or another that short circuited/overloaded it it and fried the resistor. What was plugged into the JUSB1 header? If all else is OK if you need to use any front panel USB device you can use JUSB2 or 3 instead. Get a volt meter and check the PSU for correct voltage of +5V to see if PSU is still OK as whatever caused that damage may have also damaged PSU.

Maybe you are looking for