MSI P45 Neo3-FR - Intel P45 still restarting. Again and again
Hi, i build new PC:
MSI P45 Neo3-FR - Intel P45 PCB 1.0
Core2 duo E7400
Corsair TWIN2X2048-6400C5 DHX - DDR2 800MHz 2GB
KME 400W ATX PZD-400 PFC High Quality
MSI N9800GT-MD512
HDD Barracuda 7200.12 ST3160318AS
After turn on is about 10s everything running and than restart and again and again restarting. I can not even get into the BIOS. The computer is simply not on.
Can someone help me?
Quote from: Jack t.N. on 04-August-09, 00:51:38
Test the mainboard outside the case on a non-conducting surface in barebone configuration (one stick of RAM, CPU, video card, power connectors, keyboard). Make sure all power connectors are properly connected: 24-Pin ATX, 4/8-Pin +12V CPU, 6-Pin +12V PCI-Express (video card))
If nothing changes, please try a better PSU.
outside the case with one stick of RAM is working. if i put second ram computer restarting again. It means that problem is in RAM?
Similar Messages
-
Problem with MSI P45 Platinum DDR2 mainboard and Corsair Dominator PC8500C5D Ram
Hi, I have encountered with a problem.
First I had
MSI p45 platinum ddr2 bios ver. 1,4
Intel E8400
Corsair Dominator PC8500C5D 2x1Gb
2 Asus ATI EAH 3870 Crossfire
and it was running with windows XP without any problems.
Problems began when I decided to upgrade to 6Gb of ram and to install Vista 64. Ram modules witch I bought are the same Corsair Dominator PC8500C5D, but 2x2GB.
When i put them together adjust voltage 2.1v and timing 5-5-5-15 they fail mem test with huge amount of errors.
when I test only 2x2gb modules memtest sometimes doesn't open at all, sometimes just stops working on 8 minutes of test. couple of times they completed memtest without any errors.
Can someone advice what should I do and what could the problem?
Thank you for your answers.Quote from: obsessed on 15-October-08, 18:20:44
Corsair Dominator PC8500C5D 2x1Gb
Problems began when I decided to upgrade to 6Gb of ram and to install Vista 64. Ram modules witch I bought are the same Corsair Dominator PC8500C5D, but 2x2GB.
1) the modules are not the same (the DDR2 chips are different)
2) as general rule, mixing 2x1GB with 2x2GB is a bad idea.
cheers -
P43 Neo3-FR + Intel Core 2 Quad Q9400 freezing
Hi guys, I'm building a new comp
The specs are:
MSI P43 Neo3-FR
Intel Core 2 Quad Q9400
4 x 2Gb Kingston KVR 800Mz HyperX DDR2
Coolermaster 550w PSU
Samsung Spinpoint 500Gb Hard Drive
LG DVD drive
Asus 8800GS graphics card
Windows 7 Home premium
The problem is it keeps freezing, when I try to reload the programme, when it loads to the desktop, at totally random times!!
It'll go on the internet fine then it'll freeze!
Any help will be greatly appreciated!
I've probably missed looods outYes I've done that and it was no different.
So I had a bit of a play with the RAM/Northbridge voltage settings, basically upping them a bit, it got a bit better i.e- it stayed on for longer 2 hours managed to download Mozilla, Avast and MSI Live update. Ran the MSI Live which said the BIOS was v1.3 and the online BIOS was v1.A0??
So closed it down last night with no probs, then tried it this morning and it froze. So I upped the aformentioned voltages and it eouldn't even boot. I tried various voltages with no joy, so I went back to what worked last night and, again, it was fine, until I tried to rate the computer in System properties. A box comes up with Running the Direct3D 9 Aero Assesment, at which point it gets about 1/20th along the bar and freezes. Re-boot it and it seems fine but try that and it goes.
These are the current figures:
MULTISPEED OC BOOSTER - DISABLED
D.O.T. CONTROL - DISABLED
INTEL C-STATE - DISABLED
ADJUST CPU FSB FREQUENCY - 200
ADJUSTED CPU Ratio - 9
ADJUSTED CPU FREQUENCY - 1800
FSB/DRAM Ratio - AUTO
CPU Voltage - Auto
DRAM Voltage - 1.848
VTT FSB Voltage - Auto
CAS -AUTO
tRCD - AUTO
tRD - AUTO
tRAS - AUTO
I downloade CPU-Z which gave me these figures for the RAM :
CAS LATENCY (CL)- 6 CLOCKS
tRCD - 6 CLOCKS
tRD - 6 CLOCKS
tRAS - 18 CLOCKS
tRFC - 52 CLOCKS
COMMAND RATIO 2T
So I take it when I was told to put the RAM timings to 6-6-6-18 its CL-tRCD-tRD-tRAS??????? -
Is the MSI NX6600LE TD256E incompatible with MSI K8N Neo3 mainboard ?
Hello people,
I have a very ugly problem here. I have an MSI K8N Neo3 mainboard here, that with PCI Express and AGP slots.
It was working fine for a while, so I dont think the mainboard itself is bad.
Originally, an Inno3D Geforce 6200 with Turbo Cache, was installed on that computer. However, in the past week the owner buyed a copy of Battlefield 2 to have some fun, he also buyed an MSI NX6600LE TD256E PCI Express graphic card to replace the Inno3D Geforce 6200 with Turbo Cache.
I got that PC here today, in order to install the new MSI Graphic card, and also install the game. Now comes the ugly part: I cannot get that card to work in that computer, and I don't know why.
At first I thought that the card was defective, so I took it out of that PC and installed it on my own PC, and the card works in my PC (see signature), and my PC's graphics card works fine on the other PC (the K8N Neo3). Even the old Inno3D card works fine.
Since the card works fine in my PC (I've used it while writing this post), and my PC's graphic card works fine in the other PC, as well as the old Inno3D card, the only thing left for me to think is that the NX6600LE TD256E card is not compatible with the K8N Neo3 board, but that seems too strange for me.
Can any one here tell me if there's some kind of compatibility problems between the MSI K8N Neo3 mainboard and the MSI NX6600LE TD256 Graphic card ?
Any help is welcome,Update:
The card is compatible with the board. What was incompatible with the card, was a little chip in the board (fried) which I didn't noticed during the first inspection of the board.
Curious thing is that it accepted other cards and not the NX6600LE, but in the end, not even my own NX6600 card, or any other PCIe card worked at all. I guess the little chip suffered some kind of damage due to power problems in the place where the computer was. With this in mind, an electrical technician will be sent to the place to verify the electrical installations for problems of any kind, so we can correct them and prevent future problems.
Back to the board thing, a new K8N Neo4-F board has taken the place of the semi-toasted K8N Neo3 board. Also, and thanks to the hibrid design of the K8N Neo3, we will still be able to use it. The PCIe slot is dead for sure, but the AGR Slot still works well, so we'll use it for traditional desktop aplications, such as word processors, internet surfing, e-mail, document scanning and printing, etc, etc, etc...
Well, that's all. I just wanted you guys to know; so no one keeps looking for an an answer to this (now solved) mystery. For me this case is now closed, so if no one is interested into it, Admins... feel free to delete the entire thread
Be well you all,
Edwin -
MSI P45 Neo3 FR - E7400 - reoccuring restart issue
I just received new parts to rebuild my PC. It were:
MSI P45 NEO3 FR
Intel E7400
2x2GB A-Data (800) memory
and BQ Dark Power 450W PSU
Unfortunately I have an issue:
After building this (with addition of my old GPU Geforce 7950) I wanted to test it... I run this set into BIOS it worked till CPU temp. reaches around 40C then it gets into restarting loop. It happened each time I made a test. Of course I've tried also with my HD attached to the set with the same result. I've checked the RAM and PSU on my friends PC and it works fine so the next 'suspect' is mobo..
What might be wrong?
My best guess is BIOS - I have A7514 IMS V.1.3
It is old but how to upgrade it when there is such a big risk in restart during process...Quote
I did not installed new Window, at present I don't think it would be possible with hardware going into restart after few minutes at best... But when I attached my harddrive with Win XP on it it runned just more or less for the same amount of time (like in plain bios) before it gets restarted.
Nah you can't just plug in a hd that contain window and other drivers which is mean for another mobo and hope miracle work though some does but in the long run you're bound to run into issue. Not forgetting different mobo are having different chipset, unless you get back the same mobo.
If you doesn't believe me, give it a try and reinstall window from fresh with the mobo driver cd. If you don't have window or are facing licence key issue. Install linux as in ubuntu instead -
MSI NEO3-FR 1.0
ATI Radeon HD 4890
4x 1GB A-DATA Vitesta Extreme Edition DDR2-800 4-4-4-12
INTEL CORE 2 QUAD Q9400 2.66ghz 6mb cache
Thermaltake Purepower W0100RU 500W
Bios Version: 1.A (Latest)
I'm really stuck on this one.
Basically the computer boots up fine when I have memory in Dimms 1 & 2, but it won't boot and keeps restarting over and over if I have memory in Dimms 3 & 4
What works:
1gb in Dimm 1
1gb in Dimm 2
1gb in Dimm 1 & 1gb in Dimm 2
What doesn't work
1gb in Dimm 3
1gb in Dimm 4
1gb in Dimm 1 & 1gb in Dimm 3
1gb in Dimm 2 & 1gb in Dimm 4
1gb in Dimm 3 & 1gb in Dimm 4
1gb in Dimm 1 & 1gb in Dimm 2 & 1gb in Dimm 3
1gb in Dimm 1 & 1gb in Dimm 2 & 1gb in Dimm 4
1gb in Dimm 1 & 1gb in Dimm 2 & 1gb in Dimm 3 & 1gb in Dimm 4
Pretty much if I put anything in Dimms 3 or 4 ... it doesn't post and will keep restarting till no end...
So the most I can have right now for it to post is 2gb of ram and they need to be in Dimms 1 & 2 which means they aren't even in dual channel.
All 4 sticks of ram are tested and works fine in another system.
I've also tried various bios settings (disabling Spead Spectrum, Disabling enhanced memory, Various Cas settings, speed settings, and voltage settings) and same problem persists.
Halp Please!
Edit: I tried putting in some new memory - Gskill DDR2-800 4-4-4-12 - 2GB stick and same problem.
Seems like my memory slots 3 & 4 are bad?Thanks for the suggestions guys.
I did get it to post in the end. Thank God.
The fix for me was to go into memory settings, then under advance memory settings change that from auto to manual. I did not change anything when all the extra settings came up, but either way it posted and I'm happy now to be able to have dual channel memory. -
Need help with MSI P45 Neo3-FR
I haven't been here in a long time. My old board (just replacing it) worked perfectly for almost 4 years after I ironed out the kinks (MSI 865p Neo2-FISR) but I finally decided to upgrade my rig, but here comes the headaches...
I bought the following for my new setup:
MSI P45 Neo3-FR (came with BIOS 1.3 installed)
2GB (2x1) Corsair Dominator 6400C4D
MSI Radeon HD 4850
Intel Pentium Dual Core E2180 (I want to overclock it hehe)
Lite-On SATA CD/DVD-RW
Old Hardware being used:
Antec TruPower 550W EPS12 (single rail 36amps on +12)
Cooler Master Centurion (forgot what model) Case
Logitech USB Keyboard
Logitech MX518 USB Mouse
2x120mm fans
2xMaxtor SATA 80GB HDDs (note: NOT SATA II, and I want to run these in RAID 0 off the ICH10R, this is specifically why I bought this board I was going to go with the P43-Neo3 over this, but the inclusion of RAID sold me on it)
1xMaxtor SATA 160GB HDD (note: NOT SATA II)
Aside some trouble I had with the Intel HSF installation was a breeze. Everything is in. I wanted to run everything stock first. Jumped into the BIOS and set the following:
SATA Controller - RAID
DRAM Voltage - 2.1v
Drive Layout:
SATA1 - 80GB Maxtor
SATA2- 80GB Maxtor
SATA7 - Optical Drive
SATA8 - 160GB Maxtor
First power on to get into the BIOS was quick. After setting SATA to RAID, POST will hang at Auto-Detecting ACHI Port 1....then find HDD after about 20-30 seconds. And it will repeat itself for Port 2. So its taking me close to a minute (I might be exagerrating but it sure isn't quick and long enough to irritate me having to keep booting) just to POST and even access the BIOS.
Tried to use my current Windows XP install, got to the Windows XP Splash screen and it rebooted. Tried again, with super long ass POST, again rebooted at the splash screen. Said, fine I'll reinstall XP.
While browsing here I forgot where I read about the SATA and long posts, so I changed my 2x80GBs to SATA3 and SATA4, it no longer takes a minute to POST, goes quick as normal.
Set Optical to boot, go into the Windows XP Install screen, F6 for custom drivers, made a RAID disc using three sources (1. RAID drivers from MSI Website, 2. RAID drivers from MSI CD included with Motherboard, 3. RAID Drivers from Intel website) and each time at a certain point I'd get a BSOD.
Tried again by moving my last HDD/Optical to the ICH10 and disabled the Jmicron. Same, BSOD.
Switched off RAID in the BIOS and set it to IDE. AGain BSOD at XP Install.
Started to think it was a Memory issue, ran Memtest both sticks passed.
One thing I noticed in the BIOS, it has my RAM clocked at 1066. Everything is on auto minus the voltage, but I didn't think it would affect it. So I changed the Ratio from auto to 1:2 (800mhz CPU:800mhz DRAM) but still BSOD everytime I try to install Windows.
This is getting frustrating. I've run out of ideas. Any help would be greatly appreciated.Quote from: BOSSKILLER on 02-August-08, 22:07:06
Read here how to do it:
>>> Slipstreaming Windows XP Service Pack 2 and Create Bootable CD<<<
>>> Slipstreamed Windows XP CD Using SP2<<<
Other option is borrow such installation disk from friends.
I moved away from my "friends" and none PC literate, so I'd be better off driving to the store and buying Vista at this point. Haha.
Okay, going to try this...sounds like that project I started a whiles back but got lazy.
Thanks guys, I'll report any results. -
hello everyone...i've bought two weeks ago a Msi P45 Neo3 Motherboard...i have a intel dual core 2 duo 6420 @ 2.13 ghz...Ati radeon hd 3850 512/256...so far so good...the ram memory is a dual channel kit Kingston KVR1066D2N7K2/2G DDR2 and i think those are the problems!With one module it starts very well...it doesn't crashes , doesn't give BSOD,nothing...but when i put both modules in DUal Channel, windows just don;t want to boot...it gives errors,BSOD,i need to give ten restarts to boot and when i'm in explorer it crashes and restarts by himself!i tried to change the ram module and both works fine but singular not both same time!why i don't know...everyone told me to flash the bios with a recent update!if you tell me how to do and what version of bios to download i would be gratefull!My MB is Ver.1.0!please help me!
PS:Sorry for my english language!:DQuote from: Svet on 14-February-11, 22:50:08
looks like there is a conflict with your system.. or the tool unable to detect it as msi board.
paste mainboard serial number
Elementul Valoare
Atribute placa de baza
ID placa de baza 64-0100-009999-00101111-041509-Eaglelake$A7514200_A7514IMS V1.8 041509
Numele placii de baza MSI P45 Neo3 v1.0 (MS-7514)
Atribute Front Side Bus
Tip bus Intel AGTL+
Latime Bus 64 bit
Ceas real 267 MHz (QDR)
Ceas efectiv 1066 MHz
Largimea de banda 8532 MB/s
Caracteristici bus memorie
Tip bus Dual DDR2 SDRAM
Latime Bus 128 bit
DRAM:rata FSB 16:8
Ceas real 533 MHz (DDR)
Ceas efectiv 1066 MHz
Largimea de banda 17064 MB/s
Caracteristici bus chipset
Tip bus Intel Direct Media Interface
Informatii fizice placa de baza
Slot/socket procesor 1 LGA775
Sloturi extinse 4 PCI, 1 PCI-E x1, 1 PCI-E x16
Sloturi RAM 4 DDR2 DIMM
Dispozitive integrate Audio, Gigabit LAN
Form Factor ATX
Dimensiunea placii de baza 240 mm x 300 mm
Chipsetul placii de baza P45
Caracteristici suplimentare Dual CoreCell
Producator placa de baza
Nume firma Micro-Star Int'l Co.,Ltd.
Informatii despre produs http://www.msi.com/product/mb
Download BIOS http://www.msi.com/service/download
Actualizare driver http://www.aida64.com/driver-updates
Actualizari BIOS http://www.aida64.com/bios-updates
AIDA Extrem edition showes to me those...i've tried to get bios from the site but did not managed:(...! -
MSI P45 Neo3-FR..Overclocking help please !
Hi i have a MSI P45 Neo3-FR [v1.0] and have managed to update bios to latest version 1.5 i am having trouble finding my way around the bios in order to overclock. Previously i have owned asus boards and it was pretty straightforward but with this board i cannot seem to have full control over all adjustments i think i could adjust fsb and possibly memory ratio and timings but not Vcore and memory voltages as they are greyed out. On the asus boards you got a dropdown list 1.1v~1.8v etc but i cannot get this option with this board.
My memory is corsair [6400] with cpu-z it seems to have timings correct but voltage should be 1.9 my cpu is a E8200 core speed 2673x8 vcore 1.192v i have disabled speedstep [f4] and spread spectrum and the jumpers are set to 266mhz~333mhz.
Any advice on this much appreciated i don't know if there is a tutorial specific to the msi bios advanced settings and how to enable it or a discription of what msi call the voltages adjustments doesn't seem to be v.core...confused!
King regards allThanks for help people i have got a good overclock..well for me I got FSB to 400mhz so my processor was 3.2ghz and memory running at 800mhz with 1:1 ratio and voltage at 1.9.
I did try to go heigher but pc just re-booted 3 times then re-set to optimum i tried a bit more voltage for cpu but it still refused. Funny thing is when i re-did FSB to 400mhz again it booted and ran no bother i checked speed and cpu was again 3.2ghz but ram was 960mhz ... i forgot to re-set ratio back to 1:1 so my ram is running at 1920mhz instead of 1600 testing with prime but i would have thought if its stable i could push cpu further possibly as i know ram can handle a lot more than 800mhz. Is this correct ? -
MSI P45 NEO3 + Q8200: Enabling Virtualization?
My system is:
MSI P45 NEO3 (BIOS AMI 2.61)
Intel Q8200
I have tried for the last hour to download a newer BIOS version but the website is down.
I am running ESXi 4.0 and when I try to create a 64 server 2003 virtual machine it tells me that my host does not support 64 bit, please enable VT
The processor supports it, please tell me how it has been solved since it seems to have been in PM's.
Many thanksQuote
The processor supports it
No, it doesn't. The Intel Q8200 Quad Core Processor does not support Virtualization Technology:
http://www.intel.com/products/processor/core2quad/specifications.htm
http://ark.intel.com/Product.aspx?id=36547
As long as you use a Q8200 you will be unable to take advantage of VT (no matter what board or BIOS you use). The only way to solve this is to install a processor that supports VT.
One more thing:
Quote
MSI P45 NEO3 (BIOS AMI 2.61)
That is not your BIOS Version. To check your current BIOS Version, please look under Standard CMOS Features -> System Information in the BIOS Setup.
Quote
I have tried for the last hour to download a newer BIOS version but the website is down.
No BIOS Update will make your Q8200 support VT. The CPU simply does not support this feature.
Quote
please enable VT
Impossible. -
MSI P45 Neo3 DPC Latency issues
Hi guys. I'm on a MSI P45 Neo3 and so far everything's good. The only thing wrong is the high memory latencies I'm seeing in the DPC latency program + programs sometimes taking too long to load or start up etc.
My motherboard is MSI P45 Neo3 - MS-7514 V1.0
Is there any beta BIOS I can try to fix this problem for my motherboard?My configuration:
Antec Midi Tower Sonata III Life Style ATX 500W
Arctic Processor cooler F7-PRO
Asus PCI-e Radeon HD3450 256MB Silent DVI/HDCP videocard
Intel Core 2 Duo E8400 3.00GHz 1333 6MB Boxed (C0 I think)
LG DVD-/+/RAM GH20NS10 20x/20x/12x Bulk
Logitech MX518 Optical Mouse (connected via PS/2)
Microsoft Digital Media Pro Keyboard (connected via PS/2)
MSI P45 NEO3-FR iP45 (PCB 1.0)
NEC Floppydrive 1,44MB 3,5"
OCZ 2x2GB DDR2 SDRAM PC6400 CL5.0 Platinum (in dual channel mode)
Samsung 640GB SATA300 16MB, HD642JJ (in RAID "prepared" mode)
Sweex Card Reader CR005V2 All-in-1 Intern 3,5" USB2.0
All running their latest firmware/BIOS and drivers as far as I know.
The system uses default BIOS (v1.6) settings, no overclocking at all.
Where should I start my investigation?
Disable software, drivers, or hardware?
Any suggestions on which particular item? -
Motherboard MSI P45 neo3-fr do not start up issue
Hi people, I just bought a new motherboard "MSI P45 neo3-fr". After installing the cpu E5200, videocard,dvd rom and hardisk, I switch it on only the cpu fan, videocard fan are running and the 4 blue led lit up. Even when i press the dvd button to open, it doesn't. Tried checking the harddisk n videocard with another computer and they are working. Ohh, I forgot to mention that I've inserted a 2GB kingston DDR2-667 ram already. Strange thing is, when I unplug the IDE cable from the dvd rom, and press the open button, the dvd rom open.
Is there something wrong with the motherboard or there's a mistake on the installation that I did. I'm really confused!!!Okay, the specs are:
CPU - Intel pentium dual-core E5200 2.5 GHz, fsb 800MHz, cache 2mb
Motherboard - MSI P45 Neo3-FR
Memory - 1x2GB kingston ddr2 - 667
Video card - Inno3D 256mb ddr2 PCI-E
Harddisk - Samsung 160GB/7200rpm/8M
Power supply unit - Aido ATX 450W
+12V 25A
+5V 40A
+3.3V 28A
-5V 0.5A
-12V 0.8A
+5V/SB 2.0A -
Hi,
Just recently got OCZ 2 X 2 GB RAM "OCZ2T800C42G" sticks, when set on Auto they get set at 1067, but on trying to check the EPP Support Information in the BIOS it hangs, any ideas ?
My Rig
=====
MSI P45 Neo3 FR 1.0 1.9
Intel Q9550 E0
2 X 2 GB OCZ2T800C42G XTC
Corsair VX450
ThanksI have Transcend 2 GB X 4 DDR2 667 modules which work without any problems, the problem with OCZ is only when trying to see the EPP Support Information, the Transcend have no such information on them
Your prompt response is appreciated, I would be heading over to the OCZ section
Thanks -
MSI P45 neo3 FR do not start, black screen
Hello,
My MSI P45 neo3 FR motherboard don't start, i have just a black screen with cpu fan working.
System:
Motherboard : MSI p45 neo3-fr
CPU : tryed with :
-Intel Celeron Dual-Core 2,00Gz/512K/800
-Intel Pentium Dual-Core 2,00Gz/1M/800
Memory :tryed with :
-Kingston kur800d2nsk2 DDR2 800 2Gb
-HYS64T64000HU-3.7-A - 240-Pin Unbuffered DDR2 SDRAM Modules - Qimonda
-HYS64T128020EU-2.5-B2 - 240-Pin unbuffered DDR2 SDRAM Modules - Qimonda
Grafic Card :tryed with :
- MSI NX8600
- Asus ?
Power Supply Unit: NorthQ NQ-4001at Standard ATX 400Watt PSU
I tryed many cmos resets and FSB jumpers changing, but nothing work !
Can I try something more ? Thanks.Please have a look at your PSU. A label on the side should give you the max amps for the 12V rail.
Try with another PSU with sufficient power. Check all your power connections once again.
Try with only one mem stick and in "barebone"config, i.e. mb outside the case on a non conductive surface, i.e. wooden table. -
MSI P45 Neo3-FR and MSI HD4850 signal loss
My computer:
MSI P45 Neo3-FR
MSI HD4850
E8400 E0
2x2Gb DDR2 800MHz (MDT)
Samsung F1 320Gb
Toughpower Qfan 500W PSU
Vista 64-bit
The problem:
The motherboard came with BIOS version 1.0 which didn't support the E8400 E0. To fix that I had to update to version 1.3, which solved the processor issue but now the graphics card loses the signal at random while playing just about any game and after restarting the computer sometimes keeps on rebooting a couple of times. I read at the german tomshardware forum of someone with a similar problem that solved the problem by using BIOS version 1.2 but that isn't really an option for me since it doesn't support my processor. So any ideas?Quote from: Frankenputer on 20-August-08, 21:52:14
Your PSU is only capable of 18A on 12V1 and 12V2, and only 16A on 12V3. But, that doesn't mean that the rails can deliver all those amps at the same time, it's just the max. Try to borrow a better PSU, preferably a powerful single +12V rail one, or get one as yours is not that great.
A good one to get would be the Corsair VX 550 or the TX 650 Corsair. Both are quiet and have powerful single +12V lines.
According to the ati webpage the Toughpower Qfan 500W is on the supported list for HD4850/70 though. One strange thing I just noticed is that 3dmark06 and furmark seem to run stable but gaming causes random signal losses. Of course it might also be a driver issue or something else(using catalyst 8.7 with Catalyst Control Center).
edit: Just noticed there is a new bios v1.4 available so I'll try that out and report back.
edit2: Ok, 1.4 was a disaster and wouldn't even let me reinstall Vista without bluescreens so now I'm trying out 1.2 and it seems to be working ok so far although it doesn't officially support my cpu.
Maybe you are looking for
-
Create PDF's in an older Version
Dear Sir or Madam, our company works with an interface for PDF forms. The fields of a form are automatically recognized. For option fields are the possible element values selectable. That works fine with forms made with the Distiller 7.0. Newly we bo
-
CS5 Crashing when saving or opening files
Mac OS X 10.7.5 It started after installing trial version of Astute VectorScribe 2. I deleted the plugin, per Astute YouTube instructions. I have also done the following. Quit Illustrator. Went to User/username/Library/Preferences/ Adobe illustrator
-
Call form in EBS with form personalization
Hi all guru, i try to call a form (function in EBS) with the form personalization and pass it one parameter (P_PO_HEADER_ID) in new SPECIAL41 menu: 1) create new sequenze with condition "TRIGGER: special41" 2) create action Built-in, type "Launch a f
-
I downloaded Montain Lion several times. I could not install. It said `could not be verified or corrupted'. How to solve this? Can I get a refund?
-
Always loading in safe mode.
Hi, It is really problem. I have gave to drink my MacBook coffee. Go to unofficial service and they try to repair and no success. Keyboard works incorrectly. But I will use usb keyboard. The problem is: when I start computer it loading in SAFE MODE.