MSI P4M900M2-L new hardware found after every switch off

I've just installed the MSI P4M900M2-L motherboard with a E4400 processor.
Everything installs fine (not ! in device manager) and everthing seems to work ok.
If I reboot the machine everything also works ok.
My problem starts if I switch the machine off. When I do this, every time windows boots (vista) the "new hardware found" icon pops up at the bottom and it installs the following:
- USB to PCI adaptor
- PCI to PCI adaptor
- High definition audio
- and also my tv tuner card
Once it's done a bit of searching all the devices become available, but how can I stop this happening. It's really annoying for Vista Media Center as I've to reconfigure the tuner every time after a reboot (about a 15 minute process).
Any help would be great, as it's driving me mad!

I think you haven't installed VIA's drivers? Have you?
check out one at http://www.viaarena.com

Similar Messages

IPod 160GB - New Hardware Found Keeps Popping Up

I've got a rather unusual problem with my 160GB iPod. I don't understand why, but it seems that at times if my iPod is being disconnected too many times, the "new hardware found" pops up, and then the add new hardware wizard. When that happens, because I don't know the exact location of the drivers that corresponds, I end up letting it search automatically, and in turn for some reason it tends to pick up and try to install my Nintendo Wifi Adaptor drivers, which I've had installed long before I even bought my iPod. I was wondering if someone could assist me, or if there were a possability to obtain drivers separately from iTunes. If anyone has any possible info please leave a reply back. Thanks!

Hi.
Have you seen this, or is it any good?
http://support.apple.com/kb/TS1538
Vic

HT1766 My Iphone 4s dont open up after i switched off it. when i open it it is stuck in the apple logo mode. I cannot switch it on again. is their any way to backup my photos since i cannot switch on my phone?

My iphone 4s dont open up after I switch off it. When I click the switch on button it blinks the apple logo in the black background. Is there anyway that i can backup my photos since I cannot open my phone?

Hello Ganewee,
Thank you for posting in the Apple Support Communities. It is certainly impossible to use your iPhone if it won't power on. I found some steps that can help with an issue like this:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If you get to step 6 where you have to restore your iPhone and your iPhone is recognized in iTunes, I would try backing it up before going through the restore. You can find steps to backup your iPhone here:
iOS: How to back up
http://support.apple.com/kb/HT1766
I hope this helps!
Best,
Sheila M.

I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
user guide

I lost all my notes after having switched off in icloud: how to recover them from a back up pls ?

I lost all my notes after having switched off in icloud: how to recover them from a back up pls ?

Just turn notes syncing back on again.

New Hardware found but not automatically installed.

Hi there, Could someone please help me I've just bought a 5th gen 80gb and my computer recognises it but doesn't automatically install the hardware. It takes me to the install new hardware wizard and can't automatically do it. So I can't do anything with it.
5th gen 80gb ipod Windows XP

Hi jenny,
Ive just tried what u say its not workin' plus I tried my 0404 in my friends computer too it says the same thing "not supported product" when i try 2 install from the cd...
Im using windows xp sp1 should I try sp2 or go for the technical service (but i was using this card with latest drivers in sp1 like 2 months)
ps: one interesting thing is when i boot my computer it says creative audigy etc found now, my friends computer says "multimedia audio controller"..
update (I tried with sp2 its not workin)
Message Edited by whatudid2me on 10-27-200604:44 PM

Bootcamp Issues: XP Frozen with New Hardware Found screen

I've installed bootcamp on an Imac with MacOS 10.6.4. This went fine. Then I installed XP. This went fine as well. Then I inserted a Mac OX X Snow Leopard 10.6.4 disk to install the Boot Camp Drivers for Windows. But XP is just frozen with the "Found New Hardware Wizard" screen. Nothing happens.
The Mac OS Snow Leopard 10.6.4 disk is not the one that came with the Imac. We don't have that disk. Could this be the problem?
If so, what can be done at this point?

Hi and welcome to Discussions,
RichScherl wrote:
I've installed bootcamp on an Imac with MacOS 10.6.4. This went fine. Then I installed XP. This went fine as well. Then I inserted a Mac OX X Snow Leopard 10.6.4 disk to install the Boot Camp Drivers for Windows. But XP is just frozen with the "Found New Hardware Wizard" screen. Nothing happens.
The Mac OS Snow Leopard 10.6.4 disk is not the one that came with the Imac. We don't have that disk. Could this be the problem?
That could indeed be the problem. What OSX disc are you using ? A retail bought one ? Or one that came with another Mac ?
If so, what can be done at this point?
Best would be to call Apple while having the serialnumber of your iMac at hand and ask for replacement OSX discs.
Usually Apple sends them to you for a relativlely small fee.
Since you also need the OSX disc for basic troubleshooting tasks it is vital to have one.
Regards
Stefan

IMovie files (v6) corrupted after computer switched off at power button

I had two iMovie files open when my computer froze. I had previously successfully dropped both of these files into the auto-play box in iDVD's Map View (so that I could avoid using "themes" in iDVD — a tip I read at this site). When the computer froze (with the screen appearing completely fragmented with multiple colours during a play back in DVD Player of a DVD I'd burned of this same project), I had to switch the computer off at the power button, and since this happened iDVD will not allow these same two iMovie files to be dropped into the auto-play box in iDVD map view. I then tried dropping older movies into the auto-play box, and I've also created a new smaller 'test' movie to drop into the auto-play box and all worked OK. So it appears that the iMovie files that were 'open' at the time the computer had to be switched off are now corrupted. I can play them and edit them, but can't get them into iDVD the way I could before.
Does anyone know if these files can be repaired (easily)?
Would appreciate any help, thanks.
Cheers,
Lehla

Hi,
This seems to be a hardware issue with the printer consider replacing printer
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Click wheel still clicks after iPod switches off!

Hi
is it normal that the Clickwheel still makes clicking noises (if touching) after i switched the iPod (5g) off.
I also own a Ipod nano, where this does not happen!

Does it do this after it has been off for 10 minutes?
Also, the iPod doesn't completely turn off for 36 hours.
btabz

C6 looses all photos after phone switch off

I never switch off my phone, but when I did first time (3 months after purchasing it) & swiitched it back ON, I had lost all the photos that I had clicked & saved in photos folder, these photos were saved by default in memory card, I then checked the other applications & songgs that I had saved on memory card, everything else is fine, only the photos are gone, to be double sure I clicked few photos again & switched off & on again, same problem. How do I fix this issue??

Please take your phone to local Care Center

My itunes will not detect any devices. When i do plug in a device it comes up with new hardware found then asks me to install it as a digital still camera. I have uninstalles and reinstalled itunes but that didnt help

Plaese help

too funny i wrote this and literally 1 minute later found a post that hrlped fix it. deleting the iTunes folder in the following location.
C:\Users\(usrname)\AppData\Roaming\Apple Computer

Connect to iTunes required after every power off of Ipad 64GB wifi

My Ipad 64GB wifi model continually prompts to "connect to iTunes" every time I power off and power back on. This is extremely frustrating and the Apple Customer Care has asked that I return my iPad. I would rather find a solution since I am working Iraq and my Ipad is my e-book reader (in place of a Kindle. Steps taken thus far:
Reset iPad (Erase All Content and Settings)
Reset Network settings
Reset All Settings (content not erased)
I've read that this problem sometimes occurs with some third-party applications installed (like Jailbird) . I do not have any of those applications installed. If anyone can offer a solution I would greatly appreciate it.
Danielle

Since you erased all content and reinstalled the OS and this still happens, sounds like a hardware failure. You need to take the iPad back to an Apple store for an exchange.

I move my videos from camera roll to a new folder. After i turn off & on my phone, the videos disappears. The videos are very important to me. Please please help. how can i retrieve?

i move my videos from camera roll to a new folder. after turn off & on again my phone, the videos disappears. the videos are very important to me. Is there any way i can retrieve it? please please help. thanks.

Photo Stream is not a backup.
Photo Stream has a limit so is temporary.
iTunes does not handle the import of photos/videos from any digital camera including from the iPhone's Camera Roll.
Photos/videos in the Camera Roll can be imported by your computer as with any other digital camera.

Why should I restart my PC after every switch OF+ON of PXI-1033+5102

Hi. I have NI PXI-1033 chassis + PXI-5102 digitizer PXI-8430 (RS232). When I start the PC (Win XP) everything works perfectly. However, when I switch OFF+ON the chassis - nothing works (see img below) till I restart the computer.
The question is how to do everythin work without restarting the PC?
Thanks a lot.

Dear Westves,
You need to reboot your computer each time you want to re-establish connection between your PXI chassis/controller with your PC.
I'm afraid there is no work around for this issue.
With Regards,
Sammy Z.

New Mac Pro (late 2013) switching off

Hi, I have the new style mac pro, cylinder late 2013 model 3.5ghz 6 core Intel Xeon E5 on 10.9.4 and have now had a few occasions where I have gone to the machine in the morning only to find it has turned itself off.
I have also had a few occasions where I have woke it from stand by and the fan has started running a lot faster and noisier than normal running conditions. The last time it happened, I powered off the machine and switched it back on and the fan was running silently as normal. This time I have left to see if the fan slows down but it has been 15 minutes now and it is still sounding a plane is warming its engines up ready for a take off.
I have to say that I have not been impressed with this machine since I have got it, it hasn't really felt any faster than my old mac pro in my experience. But thats another topic (I wanted to mention it in case I had a Friday job and its just not performing well)
I will phone Apple as it must still be under warranty but I wanted to ask advice first.
Regards,
Jason

lllaass,
sounds like there is a background application that runs it hot. Open activity monitor an check what applications are running and how much CPU they use.

MSI P4M900M2-L new hardware found after every switch off

Similar Messages

Maybe you are looking for