MSI P67-GD65 B3 Sound not working.

Hey guys, I don't know whats up but my sound is not working when I plug my speakers in the back.
When I plug the speakers in the front of the case they work fine. The Realtek HD Audio Manager even reads that I have plugged something in when I plug the speaker in the back. All the ports on the back are read by the Realtek Manager but no sound comes out when I try to test them. I even make them the default Device in the sound panel.
I am running Windows 7 64 Bit.
My monitor speakers also work fine, and my monitor is running on HDMI on the Geforce 560ti card.
Here are my Specs

Perhaps you can also try to deactivate (temporarely) all non-Realtek-Audio stuff in device manager (just to make sure that there is no interference).
As it looks, some short-circuit problem is either completely knocking out the back-panel audio ports (hence the suggestion to test the whole thing outside the case (barebone setup)) or the ports are defective (whether or not this has been so from the beginning or happened as a result of some short-circuit issue, is irrelevant at this point). 
In case the problem still occurs when the board is sitting outside the case, the next logical thing is to assume some sort of defect, which means that unless you want to live with this issue, an RMA procedure is probably in order.

Similar Messages

  • MSI K8N Neo 3 Sound Not Working

    Hello All
    I recently got MSI K8N Neo 3 but the problem is that I don't able to detect the sound card in Windows XP.
    The sound card don't detect in Windows XP Service Pack 2 Till November 9 Updates.
    My System Specs are
    MSI K8N Neo 3
    AMD Sempron 2500+ 64-bit
    Kingston Value RAM 512MB
    Nvidia Vanta 16MB
    HardDisk Sata 250GB Western Digital
    Power Supply 20 Pins (Not 24 Pins) 300 Watts (Atleast Written)
    I don't know the where the problem is  . The Audio is enabled in board. I have updated one motherboard bios before checking but the sound was not working so I got new one in replace. I don't upgrade the bios and install Windows XP Today but no sound.
    Looking Forward to solve this problem.
    Regards
    Faisal

    Yes, the PCI Sound card is not there. If the sound card is not detected, How I can move the sliders. The Sound icon is only show when the drivers are there and my sound card is not detected. Maybe some hardware conflict or some voltages problem. That I want to confirm. Which thing is creating problem?
    Thanks for your Reply...
    Further Suggestions Needed 

  • MSI-6529 On Board Sound Not Working

    Hi,there
    I have a PC MSI-6529 mobo,Windows 98,P4 1.5Ghz,savage 3d Video Card, 256MB PC133 RAM, realtek 8139 NIC.
    I tried to install the on board sound,but I'm having some problems.
    I downloaded ac97 audio drivers from MSI's website (Realtek AC97)and after reboot I get the following message: The NTKERN.VXD, MMDEVLDR.VXD device loader(s) for this device could not load the device driver. (code 2).
    How I solve this problem?
    thanks a lot
     

    If these are indicated in the bootlog as such:
    Initializing NTKERN.VXD : Failure
    Initializing MMDEVLDR.VXD : Failure
    I need to ask you if you've install the drivers in Windows with onboard sound enabled or disabled?
    All the Best... :D!!!

  • MSI Z87 GD65 Mechanical keyboard not working!!

    My computer is less than a month old and I've had this problem ever since every few days ill boot up and my mechanical keyboard will get the usb port has failed to reset error in windows, sometimes it will start working on its own but idk what to do about it please help!

    okay so its a max keyboard nighthawk x7 and it works perfectly fine on my laptop and my friends desktop/laptop, i use msi fastboot so i cant get into the bios with the keyboard, my logitech wireless mouse keyboard combo work fine but this keyboard doesnt its very frustrating

  • MSI P67 GD65 Boot Beep change after bios flash 1H & 1I

    Good evening.
    First of all my pc specs:
    - Msi P67 GD65 B3 Revision
    - i5 2500K
    - 2 * 4 gb DDR 3 G.Skill Ripjaws XF3 1600 mhz
    - Sapphire HD 4870
    - Ocz Vertex II 60 Gb (windows 7)
    - Western Digital Blue Caviar 1 tb (storage)
    Today I flashed the bios using a bootable pen drive.
    Previously I had the 1.9 version and all went perfectly fine. The booting sequence was : 1 short beep, short beeps counting my usb devices and 1 final short high tonality beep.
    Now I updated to version 1.I and the beep sequence changed completely: now I have 1 long low tonality beep, short beeps counting my usb devices and no final short high tonality beep . Also it takes some more seconds than version 1.9 before making the beeps!
    I tried also versione 1.H (which I have in this very moment) and I experienced the same faulty beep sequence
    I also tried to clear c-mos and load optimized defaults but I still have the same beep sequence in both cases.
    What shall I do?
    Please notice I never changed memory or cpu settings (no overclock at all)

    Quote
    They say do not care about the beeps if the PC could work normally.
    Same thing I already told you... 
    Forgot about those stupid beeps.  As long as the system starts & boots fine, they are not critical error signals to begin with but status signs, that tell you that some things are there.
    Quote
    What do they mean by "the new bios should fix some beep error" ? Which bios are the talking about? Maybe the upcoming 1 L version which is going to be released in future?
    What they are telling you is that the beep sequence is not something to worry about. That the beeps "lie" so to speak and that you are looking for a meaning that is not there.
    Quote
    What beep sequence do you have with 1.C version compared to the two videos I posted ?
    It does not matter.  You are getting hung up on beeps even though the system is obviously running just fine.  If the beeps are getting on your nerves, then unplug the speaker from the board and enjoy the silence.
    This is a non-issue.  Stop being paranoid. 

  • AUDIODG.EXE hogging 80-100% of CPU and sound not working in Vista . . .

    I posted this on a Microsoft Answers Forum but none of the techs or people reading have been able to help so far.  I'm dying to get to the bottom of this:
    Here is my computer:
    MSI K8N Neo4 Platinum
    AMD Athlon 64 3000+
    2GB RAM
    XFX GEFORCE 6600 GT 128MB DDR3 DUAL DVI & TV OUT (PCI-E)
    200GB WD SATA HDD
    500GB WD HDD in external enclosure via USB2
    NEC ND-3520A 16X DVD±RW Dual Layer DVD Burner
    LG CD Burner
    I've been using Vista Home Premium successfully for some time.  Recently, not too long after I did a clean wipe of my OS, my audio would stop working.  The way it would happen is that everything would work fine until I started iTunes or another audio application and when I would hit play, things would lock up.
    Upon inspection of my system resources, I'm noticing that the audio platform for Vista, via the audiodg.exe, is using close to 100% of my CPU resources, even when the computer is making no sound at all.
    I've had a Sound Blaster Live! card in my computer for some time but I was not using it; I use the Realtek AC'97 audio drivers that are on my motherboard instead.  I thought that the conflict may be the computer wanting to recognize my Sound Blaster, so I took it out of my computer but the problem seems to be worse.
    Are there any BIOS setting that need to be adjusted for my sound to start working again?
    I'm very reliant on the audio processing power of my computer (I'm in the radio industry, part-time) and this is a huge drag on my productivity.
    Any tips would be much appreciated.
    REPLY #1:
    Thank you for using Microsoft Answers forum.  I suggest going to the manufacture of your sound card and download the latest drivers and install them.
    MY RESPONSE:
    Good suggestion.  The problem is this:
    I am running on-board audio.  I have an MSI K8N Neo4 Platinum motherboard which runs "Realtek ALC Series AC97 Audio Driver" and there is no version for Vista. They have a version for Windows 2K/XP and one for Windows XP 64bit.
    Should I use on of those and if not, then what?
    UPDATE (from me):
    I took a chance and found a Realtek AC'97 driver for Vista.
    http://drivers.softpedia.com/progDownload/Realtek-AC-97-Audio-Codec-Driver-Vista-6183-Beta-Download-18114.html
    I went to install it and the install hung.  So, I closed one of the install windows and then the InstallShield app continued like it was working.  So, I hit "Restart my computer".  Well, the reboot hung too.  So, I reset the PC manually.
    When the computer came back up, the sound worked.  Hard to tell if this will fix it for good but it's promising.  Chaotic.  Unpredictable.  Annoying.
    REPLY #2:
    Before you tried updating drivers, did you try rebooting 1st?
    I'm just trying to determine if rebooting your system is what resolved the issue - thank you
    UPDATE II (from me):
    My computer is behaving the same way it was before.  AUDIODG.EXE taking up 80-100% of my CPU and the sound not working.
    Any other ideas?

    Small update: Despite my intelligence, good looks and vast experience I use Google sometimes. To my surprise this file turns out to be a Windows one. Here is someone who is much happier, and since it is some way in my line of thinking I'll quote it, but you might take my previous advice as well:
    http://forums.techarena.in/windows-vista-performance/1012315.htm
    "- Open up msconfig.exe > Manage startup programs.
    - Disable ALL Realtek entries
    - Close msconfig.exe
    - Right-click on the speaker icon > Audio devices > Speakers (properties)
    - Go to the enhancements tab
    - Check the box to disable all audio enhancements
    - Close the menu
    - Right-click on the speaker icon > Recording devices
    - Disable all your microphones (yeah..., the actual problem seems to come
    from voice inputs rendering..)
    - Close the menu
    - Restart your computer"

  • Why does sound not work on my Mac Air?

    Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.

    Open System Preferences > Sound > Output
    Make sure the coorect output devices is selected and the Mute button is not checked.

  • Sound not working Notebook Envy 15 TS windows 8 and windows 8.1 - problem continues

    Hello,
    My computer sound stopped again.
    I posted previously: 
    http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Sound-not-working-Notebook-Envy-15-TS-windo...
    After I`ve followed David`s  steps my computer`s sound started working again. But it didn`t last. The sound stopped working just one day after.
    I did the procedure again, and it worked. But just for a few hours.
    The second time I reinstalled the IDT codec I noticed at the device manager that there is no conflict at the IDT High Definition Audio CODEC.
    Instead, the conflict appear in another item of the sound, video and game controllers topic: high definition audio device.
    Is there another codec I should reinstall?
    Could anyone help me?
    Regards,
    Luiz

    As nobody asked me yet, I`m going to provide some additional information, hoping this can help getting me some help!
    The properties device shows the following log:
    This device cannot start. (Code 10)
    {Operation Failed}
    The requested operation was unsuccessful.
    Driver provider: Microsoft
    Driver date: 22/08/2013
    Druver versuib: 6.3.9600.16384
    Digital Signer: Microsoft Windows
    The Driver File Details shows the following driver files:
    C:\WINDOWS\system32\drivers\drmk.sys
    C:\WINDOWS\system32\drivers\HdAudio.sys
    C:\WINDOWS\system32\drivers\ksthunk.sys
    C:\WINDOWS\system32\drivers\portcls.sys
    C:\WINDOWS\system32\SysFxUl.dll
    C:\WINDOWS\system32\WMALFXGFXDSP.dll
    Beyond this files above listed, the driver details sogs these informations:
    Provider: Microsoft Corporation
    File Version: 6.3.9600.16384 (winblue_rtm.130821-1623)
    Copyright: (c) Microsoft Corporation
    Digital Signer: Microsoft Windows
    More information:
    If I ask to Ubdate Driver, with automatic serch engine, I get a message saying the best driver software for me is already installed and that mine driver software for the "High Definition Audio Device" is up to date.
    Can anyone help me now?
    Thanks,
    Luiz

  • I have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

    i have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

    Hi pystyke,
    Welcome to Apple Support Communities.
    You may find these links helpful with troubleshooting the audio issue you're experiencing:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Best,
    Jeremy

  • My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

    hhi guys
    my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

    Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

  • 5.1 sound not working

    I have a X-Fi fatalty titanium champion series sound card with logitech z5500 5. speakers running vista x64 sp. I cannot fully utilize the 5. speakers for some reason. I have updated to the latest drivers, selected 5. speakers from both windows and the creative console launcher but then i get some butchered sound from only the front left and right speakers. I know the other speakers work bc if i only use 2. then i get the sound but it lacks the entire 5. stereo effects. Please [email protected]

    Re: 5. sound not working?
    cedricganon wrote:
    Ive tried all those options but nothing. Device manager also says it is Creative SB X-fi. whats also suspicious is that if i use the sound card built into the motherboard, i get the same problem.
    When testing the speakers i only have sound from the front left and right speakers. the others are silent. thats through both the vista tester and Creative tester
    If that's the case I strongly suggest you test the speaker's connections out, probably on a separate PC if possible!
    Also check this [url="http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=9692">FAQ[/url] out for more details on connection and settings of the Z5500 speakers when used with a desktop PC.
    Message Edited by boon2 on 05--2009 09:44 PMMessage Edited by boon2 on 05--2009 09:5 [email protected]

  • Sound not working for text alert just vibrate

    Sound not working for text alert just vibrate and no sound on keyboard

    I'm having the same problem, it just started today (11/13/2012). 
    Settings > Sounds> Text Tone = Tri-tone
    Lock Sounds = On
    Keyboard Clicks = Off
    The mute button is also in the correct place (ring, not mute).

  • I have a problem with my Iphone 5 all sounds not working

    sounds not working at all with my iphone 5.

    Hi Ali147,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Hope this helps ....
    Judy

  • IPad sound not working

    iPad sound not working. Need help

    Is it working on any apps e.g. Music and Videos apps but not third-party apps or notification sounds ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • I have pavilion dv6 sound not working hp provide new update idt stil not working

    HI .
    i have pavilion dv6 sound  not working hp provide new update idt stil not working

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for