MSI P67A-G43 (B3) LGA 1155 Intel P67 wont BOOT!

My pc
PSU:Ultra 650w
CPU: Intel Core i7 2600k
MOBO:MSI P67A-G43 (B3) LGA 1155 Intel P67
Video Card:ATI 6950 GIGABYTE 2GB.
HDD:SEAGATE 1TB
RAM: G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL
Explanation
I recently changed my motherboard from gigabyte+amd 955(worked flawlessly) to an intel core i7 2600k and the current mobo, i kept all the previous components and now i am having trouble booting up my pc. It starts and all the comps seem to work no beep but the monitor LED turns off and on and there is not even a "no signal" notice therefore i dont think its my video card causing the issue.
What could it be? I heard that CPU is the least faulty component.
Is the memory compatible or should i switch? worked fine on previous build.
Or is it the mobo?

Thanks for the help it happens that it was my dumb monitor not working in hdmi or dvi controller. Funny cause the component works fine on my ps3.....
So no problem whatsoever just my monitor worned out and needs to rma because its been only 1 year.
But before you leave i had to remove the cpu to check if i put it right... and maybe some thermal contact worn off a little bit because the motherboard bios in the OC section is displaying 55 degrees celcious is that normal(the bar reaches red section)? Room temp 74 degrees. also hardware monitor displays 40 degrees celcious each core Which one should i believe.

Similar Messages

Fan Header for MSI P67A-GD53-B3 Motherboard LGA1155 Intel P67

Hello,
I have a MSI P67A-GD53-B3 Motherboard LGA1155 Intel P67 ATX RAID.
My CPU heatsink (Corsair H50 - requires pump control and fan control headers) fan has a four pin header (incl control). I cannot find on the board this 4 pin header for the CPU heatsink fan. Am I missing something?
Nevica

Have another look:
Point your eyes to the memory slots and look above the top slot on the right ("DDR3 Dual Channel Memory Optimizer Technology >[....]<-- CPU FAN HEADER.

MSI Z77A-G43 GAMING LGA 1155 MOTHERBOARD

Does anyone know where I can get one of these in the UK, everywhere I look it says out of stock/discontinued..... I mean everywhere
I have no choice to get a z77 version of the motherboard as im running an i5 3350p ivy bridge which is a 1155 socket.
any help or location of this product would help.... I wish MSI would just sell their stuff too.

Quote from: badboy2k on 07-March-14, 08:49:26
http://www.amazon.co.uk/MSI-Z77A-G43-Motherboard-Pentium-Celeron/dp/B007JRGV14/ref=sr_1_1?ie=UTF8&qid=1394153251&sr=8-1&keywords=Z77A-G43
was easy as just typing it in on amazon enjoy!!!!
Thanks for the reply I did see that one but I was looking for the red and black dragon emblem one, its seem everyone of these I find is somehow discontinued.
prefer the red and black as its goes with the colours scheme I have also matches the 2 msi GPU's I have, just wondered if anyone knows of a UK retailers of this version
As a side note the blue and black doesnt look as impressive XD

MSI P67A-G45 (B3) LGA 1155, High temperature of a chipset mainboard

Hi!
Under "serious" appendices, the chipset is heated to 90-95 degrees
In tests for site MSI in peak loads 71 degree is designated
And specifications it is possible to look at tests under the reference:
http://ru.msi.com/product/mb/P67A-G45--B3-.html#?div=TestReport
(Military Sertificate)
Hardware Monitor:
http://imglink.ru/show-image.php?id=829b56fea93fa7408384b57b37fa98f2
And why in a strain "Aux" as shows problems?

The 48C sounds more acceptable.
If you ever flash the BIOS again, then use the forum flasher. With Live update you have a good chance of bricking the board. >>Use the MSI HQ Forum USB flasher<<
Suggest you do a CMOS clear if you haven't done it after your BIOS flash. >>Clear CMOS Guide<<
Downlaod the latest version of the applets that you use to monitor your temps with.

MSI P67A-G43 (B3) No Video

No video, no keyboard lights. New build.
New GeForce GTS 450, top PCI-e slot, moved to lower. Switched to working PCI-e card. No video. GPU fans work.
4 lights, no beeps. Starts and then stops once or twice. Then 3rd time stays on.
No keyboard lights (not USB).
Tried one stick of RAM left blue slot, then tried black.
Front power button turns on but not off, likely my wiring fault.
Monitor working condition, power light on.
Intel Core i5-2400 Sandy Bridge 3.1GHz
MSI P67A-G43 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
G.SKILL Ripjaws X Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
WD SATA hard drive
ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner
EVGA 01G-P3-1450-TR GeForce GTS 450 (Fermi) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
COOLER MASTER Elite 460 RS-460-PSAR-J3 460W ATX12V V2.31 Power Supply

If it definitely is the power supply and definitely not the motherboard can you suggest something not too expensive? From NewEgg I can't figure out what to get in the Corsair +12 volt and 30-35 amps range.
$90
CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139005
$90
CORSAIR Enthusiast Series TX650 V2 650W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139020
...Or something else from Corsair here:
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007657%2050001459&IsNodeId=1&name=Corsair#
Thanks. I've had this build on hold for over two weeks now and need to get it up and running.

MSI Z77MA-G45 LGA 1155 Intel Motherboard z77 please help me

So i just got my MSI Z77MA-G45 LGA 1155 Intel Motherboard z77 slotted it all together all seemed fine untill it wouldn't recognize my hard drive. I currently dont have a dvd drive at the moment so i put all the files of the win7 and msi drivers on the same 8gb stick. When i search for storage intel and see compatible drivers it sees one in RAID which i install but nothing else seems to happen. Ive been in bios and switched it from ahci raid and ide, that ahci etc one and Raid appear to be the same out come ie no harddrive visable. IDE doesnt even load it gets to starting windows logo then black screen and yes a i checked the harddrive is on the bottom sata1. Is my motherboard just defective or is there anything else to try. Sorry i have no other computer to use other than my laptop hopefully get a dvd drive soon (in the post) and hopefully a ssd to see if its the harddrive but i dont think that will make much difference. Cheers for any advise

So now everything seems to be working fine, but when you are in windows, if you leave the computer at idle it crashes?
For now, go into uefi bios and hit f6 for optimized defaults.
Hit f10 save and exit.
Once you have entered the os, open cpuz and post screen shots of the spd tabs of each memory stick installed and the memory tab. (You can open multiple instances of cpuz and take 1 screen shot.)
*When you do this the bios will default to achi mode remember.

First PC Build: MSI P67A-G43 - Can't Boot From Windows 7 DVD

MB: MSI P67A-G43
HD: Seagate 1TB
DVD: HP 1260
CPU: Intel i5 2500K
I just built my first PC. In the BIOS I had it set to boot first from my DVD drive that has a 64-bit version of Windows 7 loaded. No matter what I tried, I received the message: "Reboot and Select Proper Boot Device"
So I have been on the phone with technical support, and they suggested I download a driver update, which I found HERE.
I have tried installing both the driver and the BIOS updates, but every time it says that the boot from the pen drive failed and to check the USB drive and ROM.
I've looked for answers all over the web, but the only ones I find assume that you've previously had Windows installed. This is a first boot though, and I really don't know what to do next. Can anyone help with this?
thanks!

If anyone would like to take a look at these OC settings that are default with my board as to a reason why it wouldn't be booting from the DVD drive or accepting the RAM, I would appreciate it.
urrent CPU Frequency: 100.00 x 33 MHz
Current DRAM Frequency: 1600 MHz
CPU Base Frequency [10kHz]: 10000
Adjust CPU Ratio: [33]
Adjusted CPU Frequency: 3300 MHz
Adjust CPU Ratio in OS: Disabled
Internal PLL Overvoltage: Auto
EIST: Enabled
Intel Turbo Boost: Enabled
OC Genie Button Operation: Disabled
DRAM Frequency: Auto
X.M.P. Disabled
Adjusted DRAM Frequency: 1600 MHz
DRAM Timing Mode: Auto
Spread Spectrum: Enabled
VDroop Control: Auto
CPU Core Voltage: Auto
DRAM Voltage: Auto
PCH 1.05 Auto
Then under CPU Features:
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Tech: Disabled
Intel VT-D Tech: Disabled
Power Technology: Custom
C1E Support: Disabled
Overspeed Protection: Enabled
Intel C-State: Enabled
Package C State Limit: Auto
Long duration power limit (w): 95
Long duration maintained (ms): 1000
Short duration power limit (w): 0
1-core ratio limit: 37
2-core ratio limit: 36
3-core ratio limit: 35
4-core ratio limit: 34

MSI P67A-G43 (B3) Won't Finish Boot after KK1 VBIOS!!!!! Win 7 x64

I recently installed the bios updates using the MSI Update and now the computer won't fully boot!!!! I tried clearing CMOS like 3 times and nothing! It makes it to the starting windows screen with the spinning dots but only the first red dot shows up and it freezes, even the repair windows freezes at the black screen.. The Bios live update also freezes at the black screen. PLEASE HELP!!!

Quote from: jellyman223 on 16-May-11, 11:37:22
The boot freezes exactly at 0:21
and what's the issue? its boot fine as i can see
Quote from: jellyman223 on 17-May-11, 02:50:11
# CPU brand, model and speed Intel Core i5-2500K Sandy Bridge 3.3GHz
# Motherboard model MSI P67A-G43 (B3) (NVIDIA VGA BIOS KK1) USING MSI Live Update for VGA
# Memory brand, type/speed, size, number of sticks Patriot Gamer 2 Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
# Video card brand, chipset type, memory size MSI N570GTX-M2D12D5/OC GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5
# Hard drive(s) brand, size, type, speed SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
# Operating system and version (including if 32 or 64bit!) Window 7 Professional x64
# Power Supply Unit brand and output in watts COOLER MASTER GX Series RS750-ACAAE3-US 750W http://www.newegg.com/Product/Product.aspx?Item=N82E16817171053
Quote
# Motherboard model MSI P67A-G43 (B3) (NVIDIA VGA BIOS KK1) USING MSI Live Update for VGA
this is KK1 is VBIOS for your MSI N570GTX-M2D12D5 card, has nothing to do with board.
what's the mainboard bios version?

MSI P67A-G43 and Call of Duty 2

I recently buyed one of this mother boards and i cant play the COD 2 multiplayer mode, an error message occurs in codmp_s.exe... XP, Vista and 7 always the same problem...

Quote from: Bernhard on 24-April-11, 16:09:30
Please provide your full system configuration. >>Posting Guide<<
You can play COD2 in single player mode? If so, then I would think that you have a game set-up problem with the mutli player mode.
Just do a search on the net for that error message and you will see you are not alone. Go to the game manufacturers site and check for game updates. It could also be related to direct X installation.
Hi, i think could be a drivers problem, i just replaced my motherboard and processor only and i never had any problem before...
Cod 2 should run perfectly on Windows XP but i have the same crash problem...
Core i5 2500k @3600 mhz
MSI P67A-G43 (B3) Bios 1A (latest drivers)
Mushkin radioactive DDR3 12800 2x2gb 7-9-7-24 @1600 mhz
GeForce 460 GTX 1 GB
RAID 0 2x WD caviar blue 750 GB
Windows XP (x86) and 7 (x86 & x64)

MSI P67A-G43 (B3) - Need help identifying this postcode

Need help identifying this postcode:
CPU:i7-2600k
Mobo:MSI P67A-G43 (B3)
PSU: Corsair 750w
GPU isn't the problem since I replaced it and still get this postcode. RAM isn't the problem since I've tried four different sticks one at a time in each slot and still get the postcode. Getting no live video from the GTX580 and no onboard video. I think either the mobo or the CPU is the problem, don't want to have to send both in for RMA so if anyone can help me identify the postcode that'd be great.

Hey Ctrl
Well I happen to have the same beep code on my motherboard (P67A-C43 B3), after trying different suggestions from the MSI forum users and MSI technical support I ended up RMA(ing) my motherboard.
You can try resetting the CMOS, by flipping the battery and leaving it like that for 5 minutes and putting it back to its original side. I highly doubt it is your cpu. Like anybody in the forum might suggest, try different components which appears you already did. I doubt your corsair is faulty. CPU and motherboard are your best bet that are faulty, and i highly doubt that it is the CPU because for there to find another person (you) that had the same problem as me since last friday (RMA board yesterday, wednesday) I find it highly unlikely.

MSI P67A-G43 (B3) Boot Password - How to reset?

I am currently locked out of my MSI P67A-G43 (B3) machine, due to a bootup password. Recovering the password is not an option, I want to reset it.
I have already attempted clearing the CMOS (both with the jumper pad and with the button), and neither appears to have worked. The password has persisted through the reset. The ClickBIOS has not been updated since the board was purchased, which was one year ago.
Any help?

Other than advice already given we do not assist in attempts at bypassing or hacking BIOS/system passwords. Reason being we have no way of knowing if parts are stolen or not or whatever reason you can't use the original p'word that was entered.
If you want to you can ask MSI for further assistance but this forum can't help with that.
>> How to contact MSI <<

MSI P67A-GD65 and other 1155's whine

Hello MSI and community.
Recently I decided to build a PC especally for minimun noise.
I waited a long time for the B3 boards so I wouldn't have to go through the trouble of returns. Sadly this didn't work out.
First of all I ordered the cheapest and first mobo(gigabyte ph67-ud-b3) that was relesed. Soon as I plugged it in and Windows 7 got to boot screen (from the DVD) it started giving off a high pitched whine.
After alot of research I RMA it and ordered a Asus P8H67-M LX. Loaded it up and thought woohoo no whine, then as soon as windows finishes installing the drivers (first time on windows) of goes the whine again.
I RMA that 1 too and bought the MSI P67A-GD65 advertized as "whistle free" as well as people on another forum saying they didn't hear anything from theirs. This one does the same but I can't keep sending back boards for RMA and want to keep this one so I'm here hoping to try and resolve the issue with MSI.
I have tested these boards with Casecom 500w, ozc gamextream 700w, antec true power 650w and coolermaster pro m 600w with them behind a door to eliminate any fan noise.
MSI GPUS: 8800GS, 8800GTX and 560TI as well as onboard from the h67 board.
I've tried many differant BIOS settings, nothing but disabling C-STATE (fully disabled) effected it. (I havn't manually played with volts)
On the other 2 boards I noticed it seemed to dim when I unplugged all USB devices and in their BIOS it was c3/c6 I had to disable, MSI board doesn't whine as loud as the other 2 but it's more constant but with a morse code type theme to it which seems to be coming from CPU socket whenever the PC is idle, it's equally noisy from either side of the board. It's very annoying and accually gives me a headache as maxium distance.
Alot of people have said their 1155 board don't make a sound but 3/3 for me have so I'm not sure what to think.
I'm currently running with c-state disabled but Turbobooster only seems to go to 25% and slower clock speed on my i5-2500k and I assume for power usage, all things I don't want.
Can you give any information at all? Might it be possible to correct with a BIOS update? I'm open to any suggestions and will keep checking back here.
Hope you will be able to work with me on this issue.
Thank you in advance, I've prefered to go with MSI all my computering life.
Paul

Quote from: HU16E on 22-March-11, 04:18:14
Used the same CPU cooler on all three? That would be my wild guess.
I test it fanless of course but no I have used mutiple heat sinks aswell.
Quote
What's wrong with throttling down at idle or low usage? Who sits at a stop light with the engine at full throttle?
I'm not too sure what disabling C-state accually does but when running Orthos I saw speed was at 3.6ghz instead of the 3.3 while disabled.
Quote
Contact MSI Tech Support by opening a ticket & ask them. This is a user to user forum, being as such, MSI will most likely never read your thread.
Thanks, I didn't realize that.

MSI P67A-G43 b3 Fan Control ?

http://www.msi.com/product/mb/P67A-G43--B3-.html#/?div=Detail
my board has - CPU x 1 / System x 4 FAN connectors
I have a CPU fan and 3 system fans connected. CPU fan is plugged into the CPU fan I/O
the 3 system, fans are plugged into #1, #2 and #3 fan ports.
so here is my dilemma. For some reason only my CPU fan and fan 1 and fan 2 or recognized. I can adjust their fan speed as i need to with no problems.
But anything i plug into port #3 or #4 is not recognized for fan control. I have swapped out which fans are plugged into all 4 system fan ports but they dont show up as even being installed when i plug them into #3 or #4. any fan i plug into the 1 or 2 spot is seen and can have speed adjusted.
Anyone know what may be causing this?

There is no monitoring or control for those fan headers, its just a power header. Most MBs only allow control for CPU and Sys #1 and # 2 at most.
If you wish to control more fans, you will need an aftermarket fan controller.

MSI H61M-E33 (B3) LGA 1155 Question

First time poster here. I made a computer just last November and have had no qualms or difficulties with it. Last night after returning home from my spring vacation I sat down to do some internet browsing. Half way through watching a video my computer shut down suddenly and didn't turn back on. After trying to press the on button and getting no signal to my monitor and no beep from the motherboard, I got the feeling that this board had died. My build looks like:
2x G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
COOLER MASTER GX Series RS650-ACAAE3-US 650W ATX12V v2.31
Intel Core i3-2100 Sandy Bridge 3.1GHz LGA 1155 65W Dual-Core processor
XFX HD-677X-ZNLC Radeon HD 6770 1GB 128-bit GDDR5 PCI Express 2.1 x16 video card
and the board that I mentioned in the title...
I guess my question is, before I order another board to replace this one, is there something that I should test to make sure this board is actually dead. Just some notes about what I'm seeing include:
No start up POST beep from the motherboard
The fans and graphics card fan run perfectly fine
Startup sounds like usual besides missing beep
All USB connected to the mobo do not power up
Keyboard connected to mobo doesn't power up
Monitor says "No Connection" when it is plugged into both the Mobo and Video Card
I have tried resetting the power supply and the wall switch, along with trying to startup the computer without one or both sticks of RAM. I have tried taking out the video card and starting all to no avail. My monitor acts like it has a connection when I plug it into the mother board/video card but then just pops up with "No connection." Is there any other diagnostics I should try, or should I just start looking into another board? Also, is there something wrong with my build that would cause the motherboard to break down like this? Any and all help would be greatly be appreciated.

that happened to me once! went away an came home and computer refused to boot. i wouldnt think imediatly that the computer is damaged as your PSU may have OCP (over current protection) on it, my psu did and the breaker had engaged blocking power flow into my system, took 3 days of power off to discharge its caps fully to disengage then it worked again!
give it a few days of idling without trying powering up for the capacitors to dump the surge they more then likely encountered and it may resolve once it has got rid of the unusable stored voltage/ampage it has!
i thought my computer was dead and was going to take it to a shop for repair (wasnt nesicarry as it resolved itself) but its sometimes just a protection mechanism causing an issue after a surge (depends on how agressive the manufacturer made it my one was very agressive)!
try in 2 days if its still dead then your very unlucky and need to hunt down the problem!

MSI P7N SLI-FI LGA 775 nForce 750i startup booting problems

Hi there!
My PC is about 1.5 years old.
Now last 3 weeks I'm having some frustrating problem when starting my PC.
Issue: my computer starts now only when there is 2 Gb total memory on motherboard.
If there´s 3 Gb or 4 Gb memory on motherboard, then I won´t even get a Bios startup screen.
(but i can see and heard that PSU and CPU fans are working)
I tried all memory modules on, separately using only one memory module. All memory modules and every slot seems to be ok.
I also try Memtest86 (with one memory module Separately) no errors found.
Motherboard PCI-E slots and graphics card are also ok.
(because my PC works like a charm when there´s only total 2 Gb memory on motherboard)
Why my PC only starts when there´s 2 Gb memory on motherboard?
Any help will be appreciated deeply!
MSI P7N SLI-FI LGA 775 NVIDIA nForce 750i SLI ATX
Bios version: V2.2
Intel Core 2 Duo E7400 2.8GHz 1066 Bus
Zalman ZM600-HP Silent 600 Watt ATX Power Supply
Transcend JetRam 2GB Dual Channel Kit (4 x 1GB) DDR2 800MHz DIMM

I know the 7600GS doesn't recommend a PSU with a lot of power(15 - 17 A), but you're running two of them in SLI. Your PSU only has 18A on the +12V rail. This could very well be your issue. Below are some good single +12V rail PSUs, Corsairs and PC Power & Cooling. You can also look for Silverstone single rail PSUs, but they tend to be pricier. If you can't get anything other than split-rail, post back and we'll try to make some recommendations.
For what you have now:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817703015 <----Free Shipping
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139008
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139003
Some future proofing:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139004 <-----Free Shipping
For Future proofing:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817341011 <----Free shipping
http://www.newegg.com/Product/Product.aspx?Item=N82E16817703005 <----Free shipping
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139005 <----Free shipping
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139006 <----Free shipping

MSI P67A-G43 (B3) LGA 1155 Intel P67 wont BOOT!

Similar Messages

Maybe you are looking for