MSI P67A-G43 (B3) Won't Finish Boot after KK1 VBIOS!!!!! Win 7 x64

I recently installed the bios updates using the MSI Update and now the computer won't fully boot!!!! I tried clearing CMOS like 3 times and nothing! It makes it to the starting windows screen with the spinning dots but only the first red dot shows up and it freezes, even the repair windows freezes at the black screen.. The Bios live update also freezes at the black screen. PLEASE HELP!!!

Quote from: jellyman223 on 16-May-11, 11:37:22
The boot freezes exactly at 0:21
and what's the issue? its boot fine as i can see
Quote from: jellyman223 on 17-May-11, 02:50:11
# CPU brand, model and speed Intel Core i5-2500K Sandy Bridge 3.3GHz
# Motherboard model MSI P67A-G43 (B3) (NVIDIA VGA BIOS KK1) USING MSI Live Update for VGA
# Memory brand, type/speed, size, number of sticks Patriot Gamer 2 Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
# Video card brand, chipset type, memory size MSI N570GTX-M2D12D5/OC GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5
# Hard drive(s) brand, size, type, speed SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
# Operating system and version (including if 32 or 64bit!) Window 7 Professional x64
# Power Supply Unit brand and output in watts COOLER MASTER GX Series RS750-ACAAE3-US 750W http://www.newegg.com/Product/Product.aspx?Item=N82E16817171053
Quote
# Motherboard model MSI P67A-G43 (B3) (NVIDIA VGA BIOS KK1) USING MSI Live Update for VGA
this is KK1 is VBIOS for your MSI N570GTX-M2D12D5 card, has nothing to do with board.
what's the mainboard bios version?

Similar Messages

First PC Build: MSI P67A-G43 - Can't Boot From Windows 7 DVD

MB: MSI P67A-G43
HD: Seagate 1TB
DVD: HP 1260
CPU: Intel i5 2500K
I just built my first PC. In the BIOS I had it set to boot first from my DVD drive that has a 64-bit version of Windows 7 loaded. No matter what I tried, I received the message: "Reboot and Select Proper Boot Device"
So I have been on the phone with technical support, and they suggested I download a driver update, which I found HERE.
I have tried installing both the driver and the BIOS updates, but every time it says that the boot from the pen drive failed and to check the USB drive and ROM.
I've looked for answers all over the web, but the only ones I find assume that you've previously had Windows installed. This is a first boot though, and I really don't know what to do next. Can anyone help with this?
thanks!

If anyone would like to take a look at these OC settings that are default with my board as to a reason why it wouldn't be booting from the DVD drive or accepting the RAM, I would appreciate it.
urrent CPU Frequency: 100.00 x 33 MHz
Current DRAM Frequency: 1600 MHz
CPU Base Frequency [10kHz]: 10000
Adjust CPU Ratio: [33]
Adjusted CPU Frequency: 3300 MHz
Adjust CPU Ratio in OS: Disabled
Internal PLL Overvoltage: Auto
EIST: Enabled
Intel Turbo Boost: Enabled
OC Genie Button Operation: Disabled
DRAM Frequency: Auto
X.M.P. Disabled
Adjusted DRAM Frequency: 1600 MHz
DRAM Timing Mode: Auto
Spread Spectrum: Enabled
VDroop Control: Auto
CPU Core Voltage: Auto
DRAM Voltage: Auto
PCH 1.05 Auto
Then under CPU Features:
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Tech: Disabled
Intel VT-D Tech: Disabled
Power Technology: Custom
C1E Support: Disabled
Overspeed Protection: Enabled
Intel C-State: Enabled
Package C State Limit: Auto
Long duration power limit (w): 95
Long duration maintained (ms): 1000
Short duration power limit (w): 0
1-core ratio limit: 37
2-core ratio limit: 36
3-core ratio limit: 35
4-core ratio limit: 34

MSI P67A-G43 (B3) LGA 1155 Intel P67 wont BOOT!

My pc
PSU:Ultra 650w
CPU: Intel Core i7 2600k
MOBO:MSI P67A-G43 (B3) LGA 1155 Intel P67
Video Card:ATI 6950 GIGABYTE 2GB.
HDD:SEAGATE 1TB
RAM: G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL
Explanation
I recently changed my motherboard from gigabyte+amd 955(worked flawlessly) to an intel core i7 2600k and the current mobo, i kept all the previous components and now i am having trouble booting up my pc. It starts and all the comps seem to work no beep but the monitor LED turns off and on and there is not even a "no signal" notice therefore i dont think its my video card causing the issue.
What could it be? I heard that CPU is the least faulty component.
Is the memory compatible or should i switch? worked fine on previous build.
Or is it the mobo?

Thanks for the help it happens that it was my dumb monitor not working in hdmi or dvi controller. Funny cause the component works fine on my ps3.....
So no problem whatsoever just my monitor worned out and needs to rma because its been only 1 year.
But before you leave i had to remove the cpu to check if i put it right... and maybe some thermal contact worn off a little bit because the motherboard bios in the OC section is displaying 55 degrees celcious is that normal(the bar reaches red section)? Room temp 74 degrees. also hardware monitor displays 40 degrees celcious each core Which one should i believe.

MSI P67A-G43 (B3) Boot Password - How to reset?

I am currently locked out of my MSI P67A-G43 (B3) machine, due to a bootup password. Recovering the password is not an option, I want to reset it.
I have already attempted clearing the CMOS (both with the jumper pad and with the button), and neither appears to have worked. The password has persisted through the reset. The ClickBIOS has not been updated since the board was purchased, which was one year ago.
Any help?

Other than advice already given we do not assist in attempts at bypassing or hacking BIOS/system passwords. Reason being we have no way of knowing if parts are stolen or not or whatever reason you can't use the original p'word that was entered.
If you want to you can ask MSI for further assistance but this forum can't help with that.
>> How to contact MSI <<

MSI P67A-G43 and Call of Duty 2

I recently buyed one of this mother boards and i cant play the COD 2 multiplayer mode, an error message occurs in codmp_s.exe... XP, Vista and 7 always the same problem...

Quote from: Bernhard on 24-April-11, 16:09:30
Please provide your full system configuration. >>Posting Guide<<
You can play COD2 in single player mode? If so, then I would think that you have a game set-up problem with the mutli player mode.
Just do a search on the net for that error message and you will see you are not alone. Go to the game manufacturers site and check for game updates. It could also be related to direct X installation.
Hi, i think could be a drivers problem, i just replaced my motherboard and processor only and i never had any problem before...
Cod 2 should run perfectly on Windows XP but i have the same crash problem...
Core i5 2500k @3600 mhz
MSI P67A-G43 (B3) Bios 1A (latest drivers)
Mushkin radioactive DDR3 12800 2x2gb 7-9-7-24 @1600 mhz
GeForce 460 GTX 1 GB
RAID 0 2x WD caviar blue 750 GB
Windows XP (x86) and 7 (x86 & x64)

Mac Pro gets stuck on the grey screen and won't finish booting

I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit. I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot (everything works o.k. there) or starting up from the software disk to perform the repairs. I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit. This happens every time I try it. I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart. Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out. Could it be a graphics card issue? I did notice some funky visual glitches occurring prior to the breakdown. Any other ideas?

I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
And off load all your data to other drives.

MSI P67A-G43 (B3) No Video

No video, no keyboard lights. New build.
New GeForce GTS 450, top PCI-e slot, moved to lower. Switched to working PCI-e card. No video. GPU fans work.
4 lights, no beeps. Starts and then stops once or twice. Then 3rd time stays on.
No keyboard lights (not USB).
Tried one stick of RAM left blue slot, then tried black.
Front power button turns on but not off, likely my wiring fault.
Monitor working condition, power light on.
Intel Core i5-2400 Sandy Bridge 3.1GHz
MSI P67A-G43 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
G.SKILL Ripjaws X Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
WD SATA hard drive
ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner
EVGA 01G-P3-1450-TR GeForce GTS 450 (Fermi) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
COOLER MASTER Elite 460 RS-460-PSAR-J3 460W ATX12V V2.31 Power Supply

If it definitely is the power supply and definitely not the motherboard can you suggest something not too expensive? From NewEgg I can't figure out what to get in the Corsair +12 volt and 30-35 amps range.
$90
CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139005
$90
CORSAIR Enthusiast Series TX650 V2 650W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139020
...Or something else from Corsair here:
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007657%2050001459&IsNodeId=1&name=Corsair#
Thanks. I've had this build on hold for over two weeks now and need to get it up and running.

My powerbook won't finish booting up

I installed some really general updates today- itunes, security, microsoft, and after it shut down I tried to start it up but it won't finish booting up. I get the chime, gray screen, apple logo, and spinning gear but it won't do anything else. I reset the PRAM but I'm afraid to do anything else due to my lack of computer knowledge. I recently upgraded to 10.4.1 and have run several software updates since and this is the first time I've ever had a problem.
Please help!!
Thanks so much :0)

Well I ran the OS X installation disk and repaired the disk and it came back "appears to be ok" but it still will not boot up- just gray screen, apple logo, and spinning gear. I also ran the hardware check disk and it came back "ok," too.
Please can anyone help? I'm desperate. I live over 4 hours away from the nearest mac store and I really need my powerbook for school.
Please, please, please any advice is helpful- I'm stumped.
Thanks :0)

MSI P67A-G43 (B3) - Need help identifying this postcode

Need help identifying this postcode:
CPU:i7-2600k
Mobo:MSI P67A-G43 (B3)
PSU: Corsair 750w
GPU isn't the problem since I replaced it and still get this postcode. RAM isn't the problem since I've tried four different sticks one at a time in each slot and still get the postcode. Getting no live video from the GTX580 and no onboard video. I think either the mobo or the CPU is the problem, don't want to have to send both in for RMA so if anyone can help me identify the postcode that'd be great.

Hey Ctrl
Well I happen to have the same beep code on my motherboard (P67A-C43 B3), after trying different suggestions from the MSI forum users and MSI technical support I ended up RMA(ing) my motherboard.
You can try resetting the CMOS, by flipping the battery and leaving it like that for 5 minutes and putting it back to its original side. I highly doubt it is your cpu. Like anybody in the forum might suggest, try different components which appears you already did. I doubt your corsair is faulty. CPU and motherboard are your best bet that are faulty, and i highly doubt that it is the CPU because for there to find another person (you) that had the same problem as me since last friday (RMA board yesterday, wednesday) I find it highly unlikely.

MSI P67A-C43 B3 won't POST with Full RAM Installed

Hello all,
I recently purchased the MSI P67A-C43 B3 mainboard as a custom build
and have been having trouble with it. I have 16GB of ram for this board
(4x 4GB) and when I have 8GB installed (slots 1 and 3 filled), it POSTS fine.
When I fill ALL the slots for 16GB total, the board won't POST and just
power cycles ON and OFF and ON and OFF, etc...
I have replaced the memory and the PSU and am about to replace the
mainboard, but wanted to ask if anyone might have a suggestion for
troubleshooting before I do that.
Here's what I'm running on the system:
mainboard: MSI P67A-C43 B3
proc: Intel Core i7-2600K 3.4Ghz Unlocked
proc cooler: Corsair Hydro H80 CPU Liquid Cooler
ram: Corsair High Perform Vengeance 4GB DDR3 1600Mhz2x4 (4 of these)
HDD: OCZ TECHNOLOGY 120GB VERTEX PLUS SSD and Seagate 1TB LP Serial ATA HD 5900/32MB/SATA-3G
CD Drive: Sony Optiarc 24X DVDRW SATA
video: EVGA GeForce GTX 560 Ti FPB 1024MB GDDR5 PCB PCIe
PSU: Thermaltake 750W Modular Power Supply. 80+ Bronze
case: Thermaltake Chaser MK-I Full Tower Gaming Case
OS: Microsoft Windows 7 Professional 64Bit DVD
Any ideas here would be greatly appreciated! Thanks!

OK, had some time to go test your suggestions here
These are the 1.5V Vengeance RAM Modules. Tried installing 2 of the RAM on slots 2 and 4 on their own. System Boots Fine.
Went into the BIOS and changed the voltage applied to the RAM modules from
AUTO to 1.575V. On AUTO it says is applying 1.5V to the 2x 4GB modules.
Installed the full 4x RAM on all slots... and the system just shuts down. Power cycling again.
What do you think here? Bad Motherboard? Can't think of anything else to try... totally stumped!
Thanks!

MSI P67A-G43 b3 Fan Control ?

http://www.msi.com/product/mb/P67A-G43--B3-.html#/?div=Detail
my board has - CPU x 1 / System x 4 FAN connectors
I have a CPU fan and 3 system fans connected. CPU fan is plugged into the CPU fan I/O
the 3 system, fans are plugged into #1, #2 and #3 fan ports.
so here is my dilemma. For some reason only my CPU fan and fan 1 and fan 2 or recognized. I can adjust their fan speed as i need to with no problems.
But anything i plug into port #3 or #4 is not recognized for fan control. I have swapped out which fans are plugged into all 4 system fan ports but they dont show up as even being installed when i plug them into #3 or #4. any fan i plug into the 1 or 2 spot is seen and can have speed adjusted.
Anyone know what may be causing this?

There is no monitoring or control for those fan headers, its just a power header. Most MBs only allow control for CPU and Sys #1 and # 2 at most.
If you wish to control more fans, you will need an aftermarket fan controller.

10.8.2 won't finish booting

Model Name:
Mac Pro
Model Identifier:
MacPro5,1
Processor Name:
6-Core Intel Xeon
Processor Speed:
2.93 GHz
Number of Processors:
2
Total Number of Cores:
12
L2 Cache (per Core):
256 KB
L3 Cache (per Processor):
12 MB
Memory:
64 GB
Processor Interconnect Speed:
6.4 GT/s
Boot ROM Version:
MP51.007F.B03
SMC Version (system):
1.39f11
SMC Version (processor tray):
1.39f11
This computer will not finishing booting. It goes right up to the point of creating the desktop then nothing. Instead of a blue desktop all that appears after the startup is a grey screen that never goes away. The mouse pointer works but that is all. Absolutely no nothing else works! I do have 4 drives on this machine this is comming to you via a BACK UP!
The OS is 10.8.2 sup 2
Any ideas? and Thanks.

Mac OS X: Starting up in Safe Mode

Macbook Pro won't finish loading after boot and password

Right after I installed McAfee Virus Scanner for Mac and restarted my laptop it won't load all the way after I put in my pasword. It's stuck on the space screen that comes pre-installed, right before my desktop appears. I went into safe mode and dragged the new application into the trash and did the disk utitlity. It finished an it says the disk is ok. The battery is charged. Is there something else I need to fix? What is going on?

You have a hardware failure. Could be the drive itself or as has happened on a lot of 2009 model MBPs the cable that goes from the drive to the logic board has failed.
For either you will be better off taking it into an Apple G Bar and having it looked at. Note to the Apple staff that it may be the cable and not the drive.
If you are in the mood to test it yourself then remove the drive from inside the case and connect it to the system with a SATA to USB adapter and at stratup hold down the Option key and select the USB connected drive as the Boot Source. If the system boots off the drive then it is the cable. If it doesn't boot off the drive or the drive isn't even listed as a boot source then the drive has failed. Whichever one it is, Replace that part.

2011 iMac 27" won't finish booting

Yesterday my iMac stopped booting all of the way. It gets the desktop up, but then stops doing anything. It has the rainbow wheel For a while but the finder never comes up. right when the desktop first comes up I can do things but only for 20 seconds or so before it locks. I have tried booting as guest and in safe mode and have the same problem. I have run disk utility in recovery mode and it finds no disk errors and almost no permission errors either. I fixed the ones it had
It will run in single user mode happy as can be. I thought it was a piece of software but I have deleted every trace of it in single user mode with no luck. moved all startup items out of the folder other than apple stuff. Cleaned out caches, cleaned network preference lists.
THere are lots of system stated assertion failed .... Com.apple.xpc.launchd service exited with abnormal code 1 in the system.log file
i went to system restore to try and restore it but it won't connect to the wireless network and just says to move it closer to the router ( even though it shows full bars.). Barring hauling this beat over to another building somewhere where I can find a network cable to plug it into, are there any other ideas what could be causing the problem?

Yeah I tried that but it refuses to connect to my wireless network even tho it has full bars ( and never had an issue before this).
wping was hoping to avoid having to carry it somewhere to try and get a network cable to it

New MSI Z87-G43 Motherboard won't reboot

Hello I've been having some issues,
I've gone through multiple steps to try and get my computer to restart properly. Every time my computer tries to restart from the BIOS, the desktop, or during installations and updates, my computer won't restart properly. the computer is still on, but it loses display and connection to my monitor, and I just receive a black screen. The only way to fix it is by hitting the power button, and turning it back on.
Any help would be greatly appreciate as I would love to get my almost new computer running.
Thanks

Quote from: Sea Dog on 20-July-14, 00:22:33
You are welcome. Glad to hear all is well now.
Add me up to this

MSI P67A-G43 (B3) Won't Finish Boot after KK1 VBIOS!!!!! Win 7 x64

Similar Messages

Maybe you are looking for