MSI P6N SLI sound problem under windows 7

Hi all!
I have an MSI P6N SLI mainboard and I have installed win7 ultimate x64 to get a look on that OS. Everything works fine expect one thing: I have no sound. I tried to install manually the realtek sound driver but no changes. When I check the Volume Control Options then neither the Speakers nor the Realtek Digital Output checked (but the speaker is plugged in).
However I have sound under Linux.
Could someone help me? (and sorry if I have missed the topic which resolves this problem if there is any)

Hi everyone,
hope it's ok to refresh this thread - I did not want to open up a new one, because this one matches my problem perfectly - but my speakers are plugged-in the right way
I'm running Win7 64 on the MSI P6N SLI (not v2 no Platinum) and am unable to install the sounddriver (well not correct - I did install the driver). The upgrade advisor said all green (under Win XP 32) and the MSI-Driver-Page propagates Win7 32/64 is supported for the SoundCard of my Board.
The driver installs just fine, but the device won't come out of "I have a problem"-state - always telling me "The drivers for this device are not installed. (Code 28)" (I event tried installing the driver manually with pointing the win-hardware-setup-routine to the driver-directory) - still no use - I removed and rebootet serveral times...
Hope anybody has a solution for this problem (I'm taking the posts above as a "this has to work"-basis so i'm not ready to give up and go out there and buy a new soundcard )
Thanks in advance for any hint.

Similar Messages

P6n sli sound problem

hey everyone, my problem is i cant seem to get my on board sound working. Ive installed the drivers from the disk i recieved with my mobo, but still no luck. Using XP media center w/ SP 2 . The mobo is the MSI P6N SLI-FI. Also when i go to control panel -> sound and audio devices thats where it says "no audio device". Any suggestions?

Have you tried the newest Realtek drivers and codec?
If you click on the link it should begin download.
If not, go to "http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1140"
where you can find the files.
("http://global.msi.com.tw/index.php?func=driverfile&dno=2423&i=0")
Realtek High Definition Audio System Software Ver. R1.63
• Driver Version for Win2000/WinXP/x64: 5.10.0.5377 for WHQL
• Driver version for Vista: 6.0.1.5386
Update Date 2007-04-23
Hope you get it working!

MSI P6N SLI PLATINIUM problem with ram 800MHz

Hello.
I have problem with ram frequency.
I have MSI P6N SLI PLATINIUM and OCZ 2x2GB 800MHz CL5 but in bios I see that my ram runs in 667 MHz. Because I have 800MHz ram, so it shouldn't be default 800MHz and not 667MHz? What I have to do to show bios that I have 800MHz ram?

Quote from: DaLoona
Oke, but they told me when i bought my new system that XP auto adjusts the speed of the memory.
XP 64 bit can works normally with 4 or more GB they said, just like vista.
Just typing what "the professional's" at the store said.

MSI P6N SLI 4gb problem closed??

Hi, All.
MSI P6N SLI 4gb LOW Performance problem closed??
Thanks

There´s a large thread about the 4GB problem, don´t know why you didn´t found it.
And YES the problems are gone.
From bios version 2.13 for sli and version 1.22new for sli platinum everything works well.
There are 4x1GB Crucials in my system and they are running without any problems now.

MSI P6N SLI boot problems

I recently bought a P6N SLI and new memory since my current board is getting old
When I got everything assembled and turned it on, all fans and lights started, but there were no beeps and no video
I made sure all power connectors were not loose and tried it with minimum components out of my case, still same problem
tried old memory in case new memory was faulty, no luck
I'm sure all old components are working (using them right now)
sent board in for RMA in case I got a bad board, new one did same thing
since the board didnt come with a D-Bracket, I threw one together (4 LEDs on the red pins, ground on USB) all 4 lit up "System PowerON The D-LED will hang here if the processor is damaged or not installed properly"

I am attaching a link to MSI's CPU support page..you can also get there by going to the top of the forum page, to the right of the MSI banner are all the links you need..handy. I would think, that any P4 series or any Core 2 Series CPU would be supported from the initial bios release. The "D" series are a bit out of the mainstream, but are supported once bios is updated. If you have a decent computer repair store, they should be able to pop in a P4 or C2D CPU to get it into bios and flash it. Hey, here's a thought...the Core 2 Duo chips are relatively inexpensive now..you can get a Core 2 Duo E4500 for about $125 US that will run circles around your D805...? Good luck.
Paul
CPU support link--> http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1141&maincat_no=1

MSI P6N SLI Platinum Sound problem

M using MSI P6N SLI Platinum (MS-7350), i am having problem with sound, i have attached 5.1 sound system all speakers are working fine accept front right, may i know what the problem is ? I've Tried everything thet was possible, Head phone, Speaker Wire, etc. etc.

What if you switched the speakers around? Does the signal from front right still missing?

Bios problem on MSI p6n sli-fi

Hi, on december i've the bios beta 2.13 on the msi p6n sli-fi and an e4300.
I changed to an e2140, and started the problems:
If i plug a ps2 mouse, then starts the beeps, here a record of then, i look for beep code, and dont find this combination on beeps:
If i dont use the ps2 mouse, the board start fine and goes ok.
Another problem was that the back USB, dont work, they detect perfect on the Admin Device, but if i plug something nothing happens :(, sometimes take the usb keyboard when boot, so i flashed the bios thinking could be any proccesor bios incompatibily, but after that, windows or while booting, dont detect the usb keyboard, or wharever i plug.
Yesterday, i've a surprise i attach an old USB gamepad, after a while, i taked good the gamepad (propably usb 1.1 gamepad, its a cheapper one). So after this which is the problem? Because of another gamepads, keyboard, usb flash drives and another things i plugged on the back, nothing work except for that old gamepad.
THE front usb works perfectly fine, without problems.
So what could be the problem? I think to go back to bios 2.13 beta bios, but i dont have back up :(
Please some help, i'm lost with this problem

Quote
PSU, tried two, HEC Orion 585watts and Powercooler 550w modular (UL of Topower have)
What are the amperage limits on the power rails of each PSU? (12V, 5V and 3.3V)
Quote
e2140
msi p6n sli-fi now with bios v2.5
2x1gb OCZ ddr2 800 plat rev2
1x 160gb Western Digital
DVDrw Pionner 111d
No video card?
Clear CMOS with main A/C power cable removed from PSU and load "Optimized Defaults" in BIOS after that. See if that changes anything.
If it doesn't, unplug the USB Front Panel Connector from the board's USB Pin Header. After disconnecting, check your back panel ports again.

MSI P6N SLI V2 power connection problems at JPW2

When Installing power supply to JPW2 the LED1 indicator extinguishes and the computer does not boot up! All other LED indicators are lit as they should. I've connected the 8 pin power supply to JPW1, and I've connected the PCIE power supply to the graphics card. Why is the computer not booting up?
I'm using the following configuration:
Motherboard: MSI P6N SLI V2
BIOS version: V1,0
Graphics card: XFX Nvidia 8800 GTS (tested and works perfectly)
CPU: Pentium 4 3,4 GHz
RAM: 4* GEIL PC2-5300 512 MB total 2 GB (tested and works perfectly)
Power Supply: LC Power LC8700 (700W) (tested and works perfectly)
Operating System: Win XP
Please could somebody help? Thanks!

Quote
CPU: Pentium 4 3,4 GHz
Please provide full CPU information.
Example:
P4 (Northwood), Extreme Edition 3.4 GHz
or
Pentium 4 550(J) (3.4GHz)
Both P4-types I mentioned as an example are not officially supported yet, that is the main reason I asked for more detailed CPU information:
CPU Support List:
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1169&maincat_no=1&cat2_no=170&cat3_no=#menu

Q6600/P6N SLI-FI Problems

Well last night I got my new parts in (Q600 and 2x 8800 GTs) and everything booted up fine and stock speeds. Then I moved onto OCing the q6600 and I am having problems. Every time I up the FSB I get a blue screen about 2 mins into windows. I have tried leaving the voltage alone and upping it a little bit, no success. I caught a glimpse of the BSOD and the one message was something about IRQs? No clue. Here are my specs
Q6600 cooled by a Zalman 9500
2x XFT 8800 GT XXX edition
PC2-6400: DDR2 800 2GB (2x1GB) 1.9V 4-4-4-12
MSI P6N SLI-FI (after market cooler on NB)
600W Xion Supernova PS

Quote from: AaronYuri on 16-December-07, 00:55:46
4-4-4-12 at 1.9v? Up it to 2.1v.
Wouldn't post at 2.1v so I left it at 2.0v but it still didn't fix it. I am stable at 1250 but it seems as soon as I break 1300 the problems start. I noticed on one of the blue screens that it was complaining about IRQs so I went to my device manager. There was some random PCI device saying its not installed? The only PCI device I have installed is my sound card and it was recognized. I disabled it but nothing really happened beside the fact that I could get to 1250. Here is some temps and BSODs shots.
Temps:
Well I hit another wall. When I break the 300 range it does the same old thing. I am getting a mix of blue screens, one complains about the drivers and the other one is the one below. The IRQ one is the most frequent.
And here is the oter BSOD, sorry its not in english but its the only one I could find on google.
http://www.winboard.org/forum/attachments/...al-dsc02179.jpg

MSI P6N SLI Platinum + 3TB HDD

Hello, I want to buy a 3TB SATA DRIVE for my old MSI P6N SLI Platinum and i want to know if i will have any problem!
SPECS:
MSI P6N SLI Platinum (nForce 430i) Bios v1.7
Intel Core 2 Quad Q6600@3Ghz
4x1GB Kingston ValueRAM 1Gb DDR2 800
F.A. XION XON-630F12P 630 Watts
Sapphire Radeon HD 5850 Vapor-X 1GB DDR5
Windows 7 Professional x64
HARD DRIVE:
3TB TOSHIBA DT01ACA300
thanks!

As I already said:
Quote from: flobelix on 29-January-13, 23:58:02
No, that won't work as that requires a UEFI bios and GPT format which is both not possible with your old board just supporting classic bios. You won't be able to access the entire drive space which makes a (costly) 3TB HDD quite useless.
Better just get nothing above a 2TB HDD.
Connection won't change that.

MSI P6N SLI Plat - Harddrive not appearing in my computer

Hi guys,
Ive just bought an additional sata2 drive for my pc. I already have a raid - 0 setup.
It shows in bios and i managed to find it using the 'manage' option through XP. Its been formatted to NTFS, and despite being able to copy files over to it,
it doesnt appear in the My computer window?? this is really beginning to bug me, the only advice online has been to format the drive which ive already done twice!!
I am no expert, so iam out of ideas. Any help appreciated.
Thanks
Intel E6600
2 Gig DDR2 Corsair 6400C4
MSI P6N Sli Platinum
XFX 8800 GTS 320 XXX
2 x (34G) Western Raptors Raid -0
Hiper 480W psu

Hello,
Quote
It shows in bios
Quote
i managed to find it using the 'manage' option through XP.
You mean XP Disk Management?
Is/was there a drive letter assigned in disk management?

Update on Pentium D 930 + MSI P6N SLi Mobo

A short time ago I was searching this forum for information concerning the compatibility of the Pentium D 930 processor with the MSI P6N Sli Mobo. It seems that this processor was not officially supported for this board. A few helpful people offered the opinion that they would likely work just fine together. I just wanted to get back to you guys and say thank you again, that turned out to be exactly the case. :D
After an embarrassing no-post situation caused by the leftover mounting spacers from my old board (which used 12) to my present board (which uses 9), everything went smoothly. Acronis with Universal restore allowed me to regenerate my operating system. After a lengthy update of drivers the computer was up and running smoothly and with a entirely welcome but somewhat puzzling difference. Whereas the old board (D945PVS) consistently provided an environment in which the CPU ran at 50°+ C (?!) and had transient temperatures as high as 58 - 59° C with an ambient 20° C, the new set up consistently ran below 40°. These results were consistent no matter what type of thermal pastes were used, be they my homebrewed colloidal silver in silicone stopco*k grease or Arctic Silver. (that's hilarious... the anti-obscenity software interpreted a fully normal English language word as obscenity)
Well, whatever the reason....sweet.
I have only attempted simpleminded overclocking as the options are somewhat limited by the processor. With the frequency for the GPU locked at 100 MHz, simply adjusting the FSB to 1000 raised the apparent speed of the CPU to 3.75 GHz, up from the stock frequency of 3 GHz. An attempt to set the front side bus at 1060 resulted in a non-bootable system so back to 1000 it went.
I have not adjusted any of the system voltages. So far I have not stress tested this other than to simply use the computer for several hours. No apparent problems yet. The system temperatures have remained between 38 and 40° C in an ambient 20°C environment.
The only thing that nags at me, and I'm fairly sure that this is of no importance is the fact that in device manager the CPUs show yellow exclamation marks and in properties I see a message saying that certain drivers failed to load for the CPU and that other software may be taking their place. Well, whatever this actually means, it has had no detectable impact on system performance or reliability.

Hiya flobelix
If by manually updating the drivers you mean by left clicking on them in device manager and selecting update --> search online, then yes, I did. I do not have the exact verbiage but the resultant error message was something to the effect that the drivers had installed but failed to start and something else may be taking their place.
Driver magician fails to detect that any cpu drivers are missing. Same with online testing services such as PC pitstop. | have done a cursory search using Google to find people with similar problems but I have not as of yet seen this EXACT problem.

MSI P6N SLI board, trouble again

Well bought a new Adaptec 31205 raid card and a few Sas drives.
Strange enough the card is NOT seen by the board. Furthermore i cannot alter the bios of the board, nor the card gets detected.
Drives spindle, card is powered on, cursor stays at the left side of the screen.
Any suggestions for this problem are more then welcome.
Had to reinstall the Dell Scsi card and drives.
thanks,
Swa

ok, i give the info i got:
MSI P6N SLI board:
Intel extreme 6800 3 ghz duo processor
4 gb 800 mhz memory PC6400 Transend
Club 3d Radeon X1600 512 mb video card
Adaptec 31205 Raid controller with 256 mb cache
5 Cheetah T10 15k 300 gb drives
Right now Dell Perc4e controller (Scsi) in a PCI-E port (8 lanes) with 3 15k Scsi drives of 36 gb in Raid 5.
Board works with the Perc4E.
As said, drives spindle, lights on card are ok, no bios, not of the motherboard, not of the Adaptec.
Thanks,
Swa

Msi p6n sli v2 no display and beep

Hi,one day I was playing game on my computer,after some time MSI dualcore center notify me that your CPU tempreture got high and shutdown your system.then I shutdown my computer.after few seconds I restart my computer then I saw that no display on my monitor and no beep sound from MSI p6n sli v2 board.I have done all processes like change ram,rest CPU and fan,VGA card and PSU but no luck.I got only all fans were spin,all led on like green and Orange and also keyboard three led lit for a while.
My system is....
MSI p6n sli v2
CPU p4 3.0ghz 631
Ram 2gb transcend 667
Gpu nvidia 210 1gb DDR3
PSU 450watt.
Please any body help me........

Quote from: roman9 on 16-November-12, 14:43:39
Hi,one day I was playing game on my computer,after some time MSI dualcore center notify me that your CPU tempreture got high and shutdown your system.then I shutdown my computer.after few seconds I restart my computer then I saw that no display on my monitor and no beep sound from MSI p6n sli v2 board.I have done all processes like change ram,rest CPU and fan,VGA card and PSU but no luck.I got only all fans were spin,all led on like green and Orange and also keyboard three led lit for a while.
It seems that your CPU (or PSU) died.
You need to borrow an old s775 processor and to test.

MSI P6N SLI V2

Hello Guys
I am having problem with this motherboard. Build a machine with this motherboard, the spec is
|MSI P6N SLI V2
|Intel Core 2 Duo E6550 2.33GHz 1333MHz Socket LGA775 'Conroe'
|1GB X 3 DDR2 800 Crucial Ballistix DIMM 240pin PC6400 CL4.0
|512MB (128MB Local) PCI-E NVidia Inno3D GeForce 7200GS DDR2 64-Bit DVI TV-out
|230 GB Maxtor IDE HDD
When i start up machine. System is not showing the result of POST ceck. Started the machine with out memory and Graphics card expecting it to beep, but nothing is happening. What could be the problem
Thanks
Vt

>>Posting Guide<<

MSI P6N SLI sound problem under windows 7

Similar Messages

Maybe you are looking for