MSI P6NGM-L Problem

I have an ASPIRE M16641 system with a motherboard which apparently it is the MSI P6NGM-L despite the fact there are no marks or prints on it.
It has decided to stop completely the other day. Did  bios reset and it turns on now, the cpu, graphic fans are spinning but there is nothing on the screen.
removed the AGP card, connected directly to the GPU from the board and still nothing on display.
Please advise.

 That is OEM and not MSI retail prodoct which MSI & this forum does not provide end-user support. You need to go to ACER with your problem.
  >> OEM boards manufactured by MSI <<

Similar Messages

  • MSI P6NGM-L system temperature and processor fan speed

    Hi folks,
    I've got a MSI P6NGM-L board that is reaching a system temperature of 46ºC-47ºC at everyday load (not playing games or doing heavy work... just browsing, email, text editor, etc). My case has got a frontal and rear 120mm (exaustor) fan, and my processor (Core 2 Duo E7200), an Akasa AK-965BL cooler. My graphics board is a XFX Geforce 9800GT with Zalman FC-ZV9 cooler. Overall temperature is just fine, except for the system temperature, that is 32ºC when the system is turned on and is cold, and reaches about 47ºC after some time and using. I disabled the onboard NVIDIA on BIOS, but that didn't make any difference. Is that temperature OK for my configuration, or somehow high?
    I thought about taking off the northbridge heatsink and applying Arctic Silver 5 in it, but I don't know if that would make any difference, and it would give me a big job, because I would have to take the board off... so I don't know if it's worth.
    Another question, is P6NGM-L board PWM compatible? I tried using speedfan to control the processor's temperature but it says it's at 100%, and I know the cooler is in silent operation. If so, what software should I use to control the processor fan?
    Thanks for any help

    I don't have a way to measure my room's temperature, but it's quite hot... something like 26ºC.
    I thought that with all the cooling I've got inside my case the system temp would get lower, but it is still the same under normal load, even since my case had only one exaustor and stock coolers.
    What about the processor's fan speed? Can I really change it by software? I plan to do some overclocking, so I would like to do tests with the processor cooler in full speed... I've googled all the way around, but couldn't find substancial information about P6NGM-L support for that.
    Thanks

  • MSI P6NGM-FIH overclocking?

    Hi - I'm looking to buy an MSI P6NGM-FIH for my dad.  He has no need for a graphics card.  I already bought an Intel E2160 CPU and I would like to overclock it to 2.4 to 2.8 ghz on stock air.
    This board seems limited for voltage to the RAM.  Anyone have any experience overclocking with this board?  My dad just can't swing a more expensive board (w/o on-board video) and then a video card too.
    Any suggestions on RAM would be nice too.  Or is this just the wrong board for his needs and my demand to overclock all CPUs at least a little.
    Thanks for your help!
    Mike

    Hi and welcome to the forum.
    For oc questions, I'll move your thread to overclockers section for more discussions.

  • Porblem with MSI P6NGM-FD during shutdown.

    Overall the PC is stable, works well. The problem is when I shutdown the PC, the harddisk turns off, but CPU and Case still runs. Some commented that this is a problem with the ACPI. Will it be solved if I request another motherboard with the same model, or I just need a bios fix from your site?
    I need immediate response. I bought this last April 22, 2008. Please send me bios update if this is the only solution. I'm tired of experimenting/installing Windows XP.

    Hello christian1616,
    first of all, let's make sure we are talking about the same board. There are three different versions of the P6NGM out there:
    - P6NGM-FIH -> BIOS v1.x   ----> MCP73U [FIH - GB Lan+1394+HDMI+D-Sub]
    - P6NGM-FD -> BIOS v2.x    ----> MCP73PV [FD - GB Lan+DVI+D-Sub]
    - P6NGM-L -> BIOS v3.x      ----> MCP73V [L - 10/100 Lan+D-Sub]
    Check your current BIOS Version. It should be displayed during POST on the status screen:
    If you cannot get a good look at the BIOS Information because the status screen disappears too fast, disable quick booting in BIOS.
    Some other thoughts:
    Quote
    Please send me bios update if this is the only solution
    Note that this is a plain user to user forum.  Nobody here works for MSI.
    We can check if there are any newer BIOS Versions for you board but in order to do that, we need to know which BIOS Version you are currently using.
    Quote
    I'm tired of experimenting/installing Windows XP.
    Have you been using an Install-CD that includes SP2? 
    Quote
    ACPI enabled.
    Was (IO)APIC enabled as well when you installed XP SP2 and was MPS Table Version set to "1.4"?
    Did you clear CMOS with main A/C power cable removed from PSU at any point and load "Optimized Defaults" in BIOS after that?

  • Msi ti 4200 problems

    i installed a msi 4200 agp video card today and have had nothing but problems. on the first boot xp did not try to install new hardware. In the display properties it did not recognize the video adapter. i tried to intsall the drivers from the installation cd but it said it was not the right files and did not recognize the path. on the second reboot no picture after windows boots. i have a gigabyte mb ga-7vrxp and am upgrading from a pci video card. any help would be much appreciated.

    Thatz Y... I won't switched to XP until it has really settle down...
    lambethduke, I know where you've got things wrong and its a common mistake as I have accidentally did it myself before ... You must have direct right click on your Display adapter driver and un-install... This will cause the screen to go blank during startup whenever you wanna install the drivers again, though you may be able to see part of the windows starting up... Next time, juz un-install the driver by double clicking on the driver and inside the profile click on un-install and this problem will never exist to you anymore...
    All the Best... :D!!!

  • MSI G4Ti-4200 problem

    Hey all, hope you can help me out.
    Having some major problems with installing the Ti4200 64 card on my system. My system continually crashes with it and no games or programs run for very long, freezing or just not loading, due to lack of virtual memory.
    I've downloaded the latest patch for my motherboard and graphics card so its not that.  Might be the psu as its only 300w so I'm looking into upgrading that. Could there be a prob with the motherboard, memory or psu.  I can't afford to upgrade all of them so is there a way of finding out which one it could be.
    System:
    Win 98
    Athlon Thunderbird 1.1
    FIC AZ11 motherboard
    765 crucial sdram pc133 (1 x 256 and 1 x 512)
    Maxtor Plus8 IDE 40 gig Hard Drive
    MSI G4 Ti4200 td-64
    Creative SB Live!
    Liteon dvd
    300w psu

    hi again,
    here are the specs for my psu.
    +3.3v - 15A
    +5v - 35A
    +12v - 10A
    -5v - 0.5A
    -12v - 0.5A
    I've since flashed my motherboard with the latest bios, probably not the wisest thing to do in hindsight as now nothing happens at all with the msi agp card so i'm running off my pci voodoo 3 2000 now. As far as the cmos is concerned, its got all the same settings as before and now i'm totally confused. I'm guessing a new psu is the order of the day.

  • MSI X48C Platinum problem

    i have a MSI X48C Platinum
    Ram: OCZ PC3-12800 Gold RAM - 4GB, 2x2GB, 1600MHz, DDR3, Low Voltage, Dual Channel
    Processor: Intel Pentium D 915 2.80GHz / 4MB Cache / 800MHz FSB / Dual-Core /
    PSU: thermaltake 420w
    Problem: i turn the computer on it sounds like its going to start up then turns off for 5 seconds then comes back on and dose the same thing over and over. if i hit the button on the back of the motherboard it will boot and say CMOS Settings Wrong, CMOS Date/Time Not Set, Press F1 to Run Setup Press F2 to load default values and continue if i click f1 it will go in to bios and if i click f2 it will load windows.
    any help??

    Quote
    sorry i dont know what you mean when you say amperage limits (A) on the +12V voltage rails
    Look on the PSU sticker.  And write down the numbers.
    Quote
    ok i got it to boot but it dose the same thing
    Did you do this?
    Quote
    Manually set the memory clock speed to DDR3-1066 for testing and see what happens.

  • MSI R9 280x problems

    Hello i have just gotten a new MSI R9 280x with building a new pc, when i installed all the drivers part from the GPU ones everything was fine, but when i installed the GPU drivers it started to crash such as "Display has crashed and restored" and sometimes it would just come up with a blue screen saying 0x00000116 error.
    Now i was thinking its my GPU drivers so i try to install the newest ones and that does not work, still have the same problem
    I also tried installing new motherboard drivers and bio's drivers and still nothing. So i would want to know is my GPU broken or my motherboard because everything for my motherboard has been working fine and as soon as i install GPU drivers i start having problems. I have tried to use the integrated graphics and that was working fine (This was when i took the GPU out my pc) with all the drivers for that working fine
    PLease help me because i really dont know what to do
    I have a MSI R9 280x
    Z97-GD65 GAMING motherboard
    i5
    Pleas help Robert

    Hi,
    Can you provide us with more info regarding your system, see posting guide: https://forum-en.msi.com/index.php?topic=38822.0

  • MSI TD512EH installation problem

    Hi, I got the TD512EH V116 Ver 2.1 512MB MSI Video card - PCI Express, Nvidia 8400GS based, and installed it in my Windows XP SP3 machine (Pentium D 3.4Ghz, 3GB Ram). The card only works as a basic VGA Card (when I connect a monitor to it, it displays windows but the video is extremely slow, even simple page browsing in Firefox, are slower than when using the bult in intel graphics of the mainboard, which I Switched off in bios before inserting the card).  When I go to Hardware device manager in XP there is a ! next to the 8400GS Card, even tough I installed the latest device driver from here:
    http://www.msi.com/product/vga/NX8400GS-TD512EH.html#/?div=Driver
    I tried updating the driver, both from Windows update (it says it can't find a better driver than the one I have installed) and manually pointing windows to the folder of the MSI driver files directly; it says it takes it but after everything finishes the exclamation mark (and the problem) remains. There are no other video cards listed under "Display Adapters". I also tried manual scan for hardware changes. I have no other Video cards in the system (nor other PCI Cards at all, in fact).
    Attached are screenshots of device manager screens- in the driver instance ID the last few characters (cropped) are &0&0008. The "File details" window shows all the driver files as ok with a green checkmark.
    The screenshots:
    http://tinyurl.com/msividprob
    or if the above link doesn't work: http://img18.imageshack.us/img18/1987/pciexpresscardnotrecogn.jpg
    The General tab says "This device cannot start. (Code 10). "
    The Resources tab is saying "The device isn't using any resources because it has a problem". (If its not using any resources how does it display basic VGA functionality even? I know its not the onboard Video card because it is not connected to the monitor). Roll back says of course "no previous driver" because I didn't install any other versions.
    many thanks in any assistance in solving this thorny problem.
    MSI Video Card Model: TD512EH V116 Ver 2.1,
    Firmware: NV116 MS111
    Driver: Nvidia_258.96_XP
    Motherboard: Intel D945GNT (latest bios update installed-NT94510J.86A.4131.EB).
    Running Windows XP Pro SP3 in admin account. Pentium D 3.4GHZ, 3GB RAM.

    News from the front line: after installing and uninstalling video drivers a few more times, I found a file, c:\windows\system32\ati2evxx.dll that refused to be deleted (Access denied) even when there are no ATI cards (nor any other external video cards, I removed them) in the system- Driver sweeper detected this file but couldn't remove it. I used MoveOnBoot to remove it, and now I get a spooky error thus:
    ***User Environment. Windows cannot load User's Profile but has logged on
    with the default profile of the system. Detail, The process cannot access the
    file because is being used by an other process***
    But my account environment seems to load otherwise with all the icons start up apps etc. Anyway the somewhat good news is that now, when I go to safe mode, the ! code 10 error in device manager no longer shows, only when booting regularly. Any thoughts?  the onboard graphics are Intel 82945G express, and now in regular boot the device manager error for the video driver is different: "Windows cannot initialize the device driver for this hardware" (code 37). When I try to do a driver update and point it to the original intel CD that comes with the system it says "could not find a better match".
    Thanks..
    Thanks

  • MSI PVS Iinstall Problems

    hey folks this is my first post and i hope it will be a sucsessful one. i recently bought a MSI TV @nywhere card and well....   i cant seem to run the PVS program. i think i got all the drivers installed but when i run the program i get "InterVideo?WinDVR Application has encountered a problem and needs to close.  We are sorry for the inconvenience.".   now i have reinstalled this program many a times and reinstaled the drives many times too just incase. programs like powerVCR 1 and 2 dont work same with InterVideo's WinDVR3 i get the same messages.   im really not enjoying my first MSI purchase and hope hope someone out there can help me
    win xp sp1
    abit nf7-s
    amd 2500+
    512mb pc3200
    30gb free out of 140gb
    MSI TV@nywhere Master

    your windows xp has been installed to drive F:
    there is another thread which details this topic and how to temporarily disable the card reader elsewhere
    install windows xp to drive c: and msipvs will install perfectly

  • MSI neo2 platinum problem, forced to reset BIOS everytime I turn on the PSU

    I just got my neo2 platinum mobo. Everytime I switch it ON all the led's at the back (diagnostic) turn red/orange and never turn green.
    I have to reset the bios everytime to get it to post successfully. (bios is the original bios, no flashes done)
    Processor: 3000+ (939)
    Anyone else have this problem? what causes it?
    [update] the bios version is 1.3 which is the latest on the msi website
    System Specs..
    AMD Athlon 64 3000+ 90nm (socket 939)
    MSI K8N Neo2 Platinum
    1 GB Kingston HyperX DDR 400 CS2
    SBlive
    Nvidia GeForce4 Ti4200 128MB MEM
    Logitech MX510
    1x80GB WD HDD with 8MB cache
    1x120GB WD HDD with 8MB cache
    Lite-On 48x CD-RW
    NEC 16X DVD RW Drive
    RAIDMAX Black Aluminum Gaming Case with 6 case fans and 420W PSU

    I think the power supply may be the problem
    Once you reset the bios you don't need the amps to spin up the drives, as they are already spinning, saving you about 3 amps I bet. If the newer bios doesn't help, try unplugging half those case fans, the non boot drive, and take the cd's out of you optical drives so they dont spin up, then try cold booting your box a couple times. If it works you know you need a new power supply.
     If it doesn't perhaps you've got a grounding problem? Are you positive that nothing metal is touching your motherboard where it shouldn't? If that isn't it, Id  assume the cmos never really clears, and then take the battery out of the motherboard for a good hour while the power supply is unplugged, then give it another shot. I've seen a bunch of DFI boards do weird stuff like that before, the exact same thing actually. Nvidia has a few odd issues with the nforce chipsets and the cmos.
    Oh, since you asked, 3000+ is 1.8 ghz. It will probably run at 2.4ghz easy (1.4 volts), thats a 90nm chip

  • MOVED: MSI vr330x vga problem

    This topic has been moved to MSI Notebook.
    https://forum-en.msi.com/index.php?topic=144982.0

    Hi again,
    Have you tried updating to Win XP Service Pack 1 yet?
    Else, you may want to try this weird method as some gave a shot and the problem's solved, but not to everyone...
    Boot up using the the cards that work, next, shutdown com(do not un-install drivers), put in the Leadtek card, boot up and see if there's the original 16bit colors with 800 by 600 res screen while starting up windows, if it does, try installing the drivers for WinXP/2000 by manually selecting the location as XP has a problem in detecting XP's VGA drivers, restart and see if problem persists.
    All the Best... :D!!!

  • MSI KT6 Delta PROBLEM

    First, my hardware :
    Everything running @ default speed & settings.
    AMD XP 2700+ (running @ about 47C idle and about 55C in work)
    MSI KT6 Delta (v2) with latest bios
    512mb DDR (333) CL2.5 Elixir
    Seagate S-ATA ST380013 (80gb), with WinXP Pro (SP1) installed
    Samsung SP1203N (120gb), as primary master on IDE1
    Samsung 52/32/52x CD-RW, as secondary master on IDE2
    Connect3D Radeon 9600 128mb
    PSU Antec TruePower 380w:
    +5V 35A  
    -5V 0.5A  
    +12V 18A  
    -12V 1.0A  
    +3.3V 28.0A  
    +5VSB 2.0A  
    I keep getting some strange BSOD. No matter what I do with the machine. Windows locks up completely and after about 1min, that BSOD comes and machine boots.
    ( http://www.saniainen.com/bs.jpg )
    In normal usage, it comes about 1-3 times/day.
    Mostly it comes when I copy some files from disk to other.
    But it comes everytime when I try to decompress big (over 400mb) ZIP-files.
    Everything did work with my old board, MSI KT4A. The problems begun when i changed the motherboard and added the Seagate S-ATA hdd.
    I have ordered new memory, Kingston HyperX 512mb (333). Could it be memory-related or something with S-ATA ????
    I have tried everything, latest BIOS, latest VIA4in1, memchecks etc...

    I had the same problem on a differnt mobo and all I did to fix it was switch the IDE cables around on the devices.
    ?Give it a try?
    It may be a jumper you forgot to change on  the IDE devices.

  • MSI Eclipse Plus problems

    Hi Guys,
    Spec as follows;
    MSI Eclipse Plus
    Inwin 650W Commander 80+ PSU
    i7 920 CPU
    6x 2GB Apacer DDR3 10600 1333MHz
    MSI N275GTZ (Twin Frozr) GPU
    Seagate Barracuda 1Tb 7200 HDD
    LG GGC-H20L BluRay/DVD
    LG W2343S LCD monitor
    Logitech MX5500 Revolution Cordless Desktop
    Logitech Z5500 Digital Surround Sound
    MS Vista Ultimate 64bit
    Bios Rev 1.0
    After a week of struggling and the box traveling back to the wholesaler twice the OS is loaded and the MB and graphics drivers. I have faced problems from the incorrect voltage RAM being supplied (1.9V) to a horribly unstable system that boots when it wants to. Currently when the systems boots there is a 25% chance that graphic of the "windows starting" page is corrupted and the PC hangs.
    This is using the only current configuration that will boot to hand to OS. I have removed 3x memory modules and only left the Black slots populated. When I populate the blue slots over and above the board quickly overheats and becomes unstable. Upon reboot either cold or hot the system will hang on "DDR init", reboot 3 times or more and sometimes displays the overclock error.
    Does anyone know what the problem is and is there a workaround or update to correct this. This PC has cost plenty dough and is frustrating the hell out of me.

    Max voltage for ram is 1.65V , change the settings manually if needed in the bios.
    Try asking a new bios on the MSI on-line support , there is a new one but it is beta i believe. (A7566IMS.111 date 1/06/2009)
    They gave me one(beta) for my eclipse (not plus)and mine is running like a rocket.

  • MSI TV@nywhere problems

    I just got my MSI TV@nywhere in today and i have a problem. I installed the MSIPVS Drivers then i try to install the InterVideo MSIPVS and i follow the instructions. It then asks for my name, company name, and a serial number. I looked everywhere for a damn serial number and the only place i could see was the S/N on the UPC label that came on the box. But, that doesnt work. What am i suppose to do?! I also dont think the MSIPVS drivers i installed actually installed! PLEASE HELP  ;(

    Just plug the video composite (yellow from the xbox) into the composite in on the card, then go to Radioshack and buy the folloiwng: 2 x Composite couplers & A cable the has 2 male RCA (usually red and white) and on the other end is a stereo 1/8" Headphone jack. This will allow you to hook the Right and Left audio out from the Xbox, into the couplers, then plug the RCA's from the other cable into the other end of the couplers. Now plug the 1/8" Stereo headphone jack into either the line in on the TV card, or directly to the line in on your sound card. Start the MSIPVS and fire up your Xbox.

Maybe you are looking for

  • Can't send mail... after 4 months of using it

    I'm stumped... help me out please. When i send a mail out, this message pops up, "Error : This Message could not be delivered and will remain in your Outbox until it can be delivered. Sending the message content to the server failed." So it's still i

  • Can't get Contribute to Create New Page

    Can't get Contribute to Create New Page --Have 'tried' all options for 'new page' - button, File>, and Ctl + N --Have tried via each of my different websites --CAN Edit existing pages! --Established myself as Administrator, and Publisher --Downloaded

  • Using JHS 'Duplicate Row' Feature In Form

    I am having a minor set back in implementing the JHeadstart duplicateRow() method in a Form (opposed to the default Table-view). In table-view the duplicateRow() method of the JhsCollectionModel works flawlessly with items that are set to Update Allo

  • Abaper roles or duties in a company.

    hi,        i have three question :--- 1. i want to know about all the roles or duties that an abaper has to perform in an organization??? 2. what is project implemention and what does it involves ??????? 3. what are the different report that we can m

  • BI Publisher estimator

    I'm looking for a estimator to estimate the effort required to develop some reports on BI Publisher, do you know how could I estimate de effort required? Regards