MSI P6NGM-L system temperature and processor fan speed

Hi folks,
I've got a MSI P6NGM-L board that is reaching a system temperature of 46ºC-47ºC at everyday load (not playing games or doing heavy work... just browsing, email, text editor, etc). My case has got a frontal and rear 120mm (exaustor) fan, and my processor (Core 2 Duo E7200), an Akasa AK-965BL cooler. My graphics board is a XFX Geforce 9800GT with Zalman FC-ZV9 cooler. Overall temperature is just fine, except for the system temperature, that is 32ºC when the system is turned on and is cold, and reaches about 47ºC after some time and using. I disabled the onboard NVIDIA on BIOS, but that didn't make any difference. Is that temperature OK for my configuration, or somehow high?
I thought about taking off the northbridge heatsink and applying Arctic Silver 5 in it, but I don't know if that would make any difference, and it would give me a big job, because I would have to take the board off... so I don't know if it's worth.
Another question, is P6NGM-L board PWM compatible? I tried using speedfan to control the processor's temperature but it says it's at 100%, and I know the cooler is in silent operation. If so, what software should I use to control the processor fan?
Thanks for any help

I don't have a way to measure my room's temperature, but it's quite hot... something like 26ºC.
I thought that with all the cooling I've got inside my case the system temp would get lower, but it is still the same under normal load, even since my case had only one exaustor and stock coolers.
What about the processor's fan speed? Can I really change it by software? I plan to do some overclocking, so I would like to do tests with the processor cooler in full speed... I've googled all the way around, but couldn't find substancial information about P6NGM-L support for that.
Thanks

Similar Messages

High CPU usage, overheating, and high fan speed on DV4-1125nr

the process igfxsrvc.exe is running in between 30 and 40 of my CPU. my total CPU is about 55% or so while idle. i tried disabling that driver, and it's CPU went down to about 20, but my total CPU was still at the same place, if not a little higher. also, my computor is overheating a lot, and my fan is constantly running on it's highest speed. i do not believe that this is caused by a dirty vent. also, I have checked the version of the graphics driver and the BIOS(both of which i saw the suggestion to update by several people having similar problems) and both are up to date. what is the problem? am i being highjacked/ infested with viruses and i dont know it despite having already ran all my virus protection and anti-malware programs? someone please help before i have to take it to geek squad! thank you in advance!

Hello,
I decided to sacrifice a little bit of performance for the sake of cool temperatures and silent fan. I have HP DV6, with AMD Turion RM-74 and HD4650.
So, Yes, You will loose up to 15 percent Your CPU power, but heyh, this processor is so fast that You will barelly notice the change. You will still watch HD content with 720p and everything else smoothly. Note, that gaming will be harder part but consider Your laptop not as a device created for heavy gaming.
At one point or another, during games, someday Your notebook inevitably colapse. It's just not meant for gaming, no matter what the specs are...
So, how to reduce Your notebook temps:
(i) Power Options -> More power options,
(ii) Balanced plan -> Change settings,
(iii) Change advanced power settings
(iv) Processor power management -> Maximum processor state -> On Battery - 50 percent, Plugged in - 85 percent.
(vi) Save changes and close.
Now, mine temperatures are - idle 48, heavy load - 57, extremelly heavy load (HD 720p content) - 62-63. (At the moment my CPU cores are at 47 celsius).
CPU still works fast, not so fast as it is working on 100 percent, but hey, fan is silent, and if You want gaming - go to Your desktop pc, leave notebook for lighter tasks, even though the notebooks specs are high,
it simply cannot handle the heat.
Best regards.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

CPU Temp and CPU Fan Speed

I am having a strange problem . One time I will boot the PC and CPU temp is 43 and CPU fan speed is 1308 rpm in Core Center. I do a restart system and the CPU temp is 32 to 36 and CPU fan speed 3308. Not sure if I should trust Core Center . Bios shows CPU temp 48 and fan speed of 3328. I have been reading here that there are a bunch of threads containing some kind of problem with CPU temp or fan speed. My Bios is 1.4. If anbody can give me some ideas that would be great.

Open CoreCenter on deshtop. Click where it says CoreCenter. Click Cool&Quite button. Then Click apply. This drops the fan speed back into the 1400 range and the temp will rise back to the 40s.

Gtx 680 high temps and high fan speed

I have my card since a few months and I always thought it was normal, until 2 days ago when a friend came over with his card an we did some tests to compare.
When I play most games my card is at about 70-80c and 70-80% fan speed.
We did a simple burn in test with furmark and after 2 minutes my card was at 84C and 78% fan speed while his was in the 60C range while staying quiet.
Of course his card was fresh out of the box and his case is bigger, so more spacing, but mine has more cooling, especially for the gpu. Could it be the thermal paste? I see people having way better results with this card than what I am getting...

Quote from: dude on 25-March-13, 01:01:37
Since it is a pretty new card I think it's airflow in your case. I read somewhere here someone gave instructions for replacing thermal paste.
My card is about 6 months old. It's just that I always thought it was normal, even if I was disappointed with how loud the card was, since I bought this one espcially for the good cooling and low noise that I've read in so many reviews and tests before buying.
However, my friend's card is brand new. He came at my place so I could build his computer. My case is a full atx tower, while his case is etax. But, my cooling was done and redone many times, espcially since my card was loud and hot, I decided to change my cooling (which did not even change 1C). I clean my case really often and my fans are well arranged to get the best airflow possible, while my friend's case has less fans and are not optimzed (intake-outake...) to have the best airflow.
Maybe the spacing really is for something, but 84C in 2 minutes of furmark with almost 80% fan speed is a lot.

MSI GT683 Black Screen and full fan speed at startup

Hello!
SO this morning i woke up and was about to start my lovely laptop.
I pressed the on button and the screen remained black and the fan sped up slowly and slowly, after 10 sec it was at full throttle!
Yesterday i got tired and put my laptop to "sleep mode" because I meant to use it later, but I fell asleep can something have happened by that?
I have had this laptop for 3 months, never had a single problem. But now this :(
And a really need my laptop for school now!
When i bought it one 2GB ram module was changed to a 4BG so the total would be 8GB, and a 60GB SSD was installed on the second HDD slot.(Boots on 22 sec )
I have played a few hours of COD MW3 but i have a coolermaster laptop cooling pad with 2 fans, so the laptop did not get so hot when i played.
So please anyone help?
(I´ve tried booting with only one ram installed and tried my ssd in my other laptop, both are fine.)

I know this is an old topic but I just had the same issue and wanted to post my results in case anyone else was having this issue and stumbles on this thread. I was playing a game on my laptop, temperatures were well within the normal range, and suddenly the computer made a sort of "zap" noise and the screen went black. The computer also fell deathly silent but the power light (the shield) was still on. No indicator lights on the mouse pad and the orange lights around the screen had gone out. I had no choice but to do a hard shutdown. When I turned it back on, the screen remained black, the power light remained lit, but no other lights on the computer. The fan was on ultra speed in a way that I have never heard my fan run. I smelled the exhaust to see if I smelled burning but there wasn't any sign of that. Anyway, I let the computer rest, tried again the next day with the same result. I contacted my warranty company, started a claim, and waited for them to send me the box so I could ship my laptop to them. In the meantime, determined as I am , I tried the laptop several more times in the next few days just to see if I would have any luck. Sometimes the fan would come on and sometimes the laptop would be ghostly quiet but otherwise everything else was the same. Same blackness, same nothingness. I immediately assumed this was a major malfunction, most likely the motherboard. When the warranty company took the information for the claim, they agreed that it sounded like the motherboard or possibly the hard drive.
Three weeks later, my laptop is on its way back to me. I received word from the warranty company that the issue was the graphics card. This completely blew my mind as I wouldn't expect the graphics card to prevent the indicator lights from flashing, the soft touch keys at the top of the keyboard, the lights on the sides of the screen, etc. They are the experts however, right? They said the video card malfunctioned. They replaced the video card and now the laptop is in working order. They are sending it back to me now and I should hopefully receive it in the next couple of days.
Sorry for the looooooong response but I wanted to give as much info as possible because I couldn't really find anything when I was searching for this same issue. Hope it helps someone!

MSI HD 7850 1GB GDDR5 OC edition Fan speed problem

Hello all.
I have some strange issue with my graphic card and fan i think. I have noticed that, when my monitor goes to sleep (or when I manually turn off), after few minutes (7-8-9-10) I can loudly hear GPU fan acceleration. And it happens every few minutes. So, everything is ok few minutes, and after that, again I can hear that annoying sound, the sound of accelerated fan. That happens only, but only when the monitor is switched off (whether it manually or automatically switched off).
I bought this video just 2 months ago, as well as other components of the computer. So, everything is practically new.
I have tested my graphic card with MSI Kombustor v. 2.4, and everything was fine. Temperatures, FPS, and all that stuf was fine.
I've never had a problem in any game so far. Everything working fine on high details all kind of games. Temperatures are pretty
normal. In a fact, I think that is temperature is lower than some average. I have a problem only with horizontal lines, but that is because i have monitor with VGA output. As a mather of fact, barely notice them. And, I have instaled latest 13.4 drivers. I deleted the old version with driver sweeper. And in an earlier version of driver was the same problem...
Again, the problem arises when my monitor is off. I have tested with MSI Afterburner 2.2.5 beta and GPU-Z 0.7.0.
All settings in both of programs are on default. So, that numbers at paragraph RMP, when monitor is off, max is 1563. That is 400 more than when monitor is on.
I have tried to test when is minimum usage of GPU fan is 40% (i just clicked on "user define" button on the right side of "fan speed"), and then, RMP number would be 1700 or even more.
When monitor is off:
When monitor is on:
So, everything is perfect when monitor is on, again. I don't think that is normal, and I beg for help. Is there any kind of solution to fix this problem? Please. I am thankful in advance. Sorry for my bad English.
P.S.
I wanted to upload pictures, but forum does not allow me. Or, I don't know how to do that. I only want to show values...

Usualy, i left Opera, uTorrent, Skype in backround. Then, I shut down the programs, and only programs in background are Avast 8 and Realtek Audio Manager (both are in system tray). No matter if you leave a program in the background or not, it's the same.
I really have never met with this type of problem and I have no idea how to fix that. If I complain to the seller, he would run tests like I did, and everything would be ok. And when I would told him about the fan problem, probably would have told me that everything is okay...
I don't know what to try, really...

MSI CD53, i5 750 - Problem with CPU Fan Speed

Hello
I have problem with this counfiguration: i5 750, MSI CD53 Motherboard.
I Have processor overheating poblem. I noticed that processor easly can go up to 90C.
I check phisycal installation, and all its ok.
After that i check RPM of CPU FAN and i noticed that it cant go over 1000 RPM, so propably this is problem.
In MSI Control Center maximum i can set 1000 RPM.
I read that CPU FAN can go up to 3000 RPM.
Maybe i have something wrong set up in bios? What can i do with this?

Quote
CD53
Which board exactly do you have?
What is your current BIOS Version?
What kind of CPU-Fan are you using (3-Pin or 4-pin PWM (four wires) and which connector is it attached to?
What are your current fan speed/control settings in BIOS Setup?
Quote
I check phisycal installation, and all its ok.
Physical installation is one thing, but what about thermal paste (have you used a PROPER amount (too much thermal paste has the opposite effect))?
What about your case ventilation?
Quote
I noticed that processor easly can go up to 90C.
Please check the CPU's core temperatures with CORE TEMP, REAL TEMP or HW-MONITOR!

Z77A-GD65 + MSI Control Center (version 2.5.053) = FAN speed control issue

OK,
I've got Z77A-GD65 board and I am using MSI Control Center (version 2.5.053). I have one fan connected to CPU fan header and another fan connected to System Fan1 header on the motherboard. The problem is that while trying to use Smart fan control in MSI Control Center (under Green Power tab) only CPU fan changes speed according to load and the one connected to System Fan1 always stays at the same "System Fan1 Min" set speed. In BIOS the system fan1 is set to auto as all other options are constant speed from 50% to 100%, both fans have 4 wires, so they can change speed. I want both fans to change speed according to CPU load. I know I can use Y (split) cable to connect both fans to the same CPU fan header but I would like to avoid this if possible.
Anybody experiencing the same thing? Issue with bios? Control center bug?

As long as the amps of the two fans doesn't exceed the limit for the CPU fan header, go ahead and use a splitter. Not positive, but believe the fan header amp limit is 1A?

Mac mini slow and high fan speeds

Hello! I have a 2011 mid range mac mini and love the machine, however I have noticed a few things. First off, it seems to be a bit on the slow side when multitasking. I have the standard 4 gigs of ram installed, but running programs like MS Word and Safari at the same time, the machine seems to struggle a bit. Also I have noticed when doing a lot of file transfers via USB, the fan will kick up to high gear for a few minutes and then drop down. Is there something wrong or is this normal? I'm doing a time machine backup of 120Gigs, have safari open and activity monitor open.
Activity monitor states 1.16Gigs free, 792MB wired, 961.4MB active, 1.12GB inactive, 2.84GB used. VM size is 150GB, page ins are 962, outs are 380kb, swap used is 10.5MB. Right now the fan seems to have slowed to a mid range mode of some sort and is not in high gear. Thanks!

How many apps you instaled? how many pictures videos and time you get usigm it? let them a litlle sleep, and your mac nmini will ne wel.
As far as the fan is concerned, it will rev up and down
based primarily on CPU load. If something is using
up a lot of processor, it gets hot and therefor the fan
speeds up to cool it down, or atleast maintain a safe temp.
When the fan revs up, open Activity Monitor and see how
much processor resources are being used and look at
the list to see if any one process is using up CPU. This
can also give an idea of what may be slowing things down
as well.
And yes, when doing a lot of file transfers, things may
possibly rev up a bit if it is continuous for a period of time.

MBP Freezes (have erased and installed, ran disk utility, and inc fan speed

Hi Guys, Any advice on this issue would be very much appreciated please.
Have had an original mbp for about 2 and a half years. Last few weeks it's been freezing between 1 and 5 times a day. By freezing I mean that the screen freezes and there's no cursor or keyboard fuctionality. Sound stops too. This happens using World of Warcraft, Pages, Office for Mac, and Safari, sometimes also the finder. Main culprit though is Safari and WoW. For comedy value, I'm a priest in WoW and it froze during a raid which resulted in the whole group wiping out! Great timing! lol
So far I have:
Ran disk utility, repaired permissions and verified disk.
Did a complete erase and install.
Downloaded Fan Control and set to 3400 base speed, left fan @ 3503 RPM and Right fan @ 3508 RPM - temp reads 46.9 oC (118 oF)
I'm guessing that since my erase and install, that it is very much a hardware issue as the problem has happened again.
Since I've done the fan thing, nothing has frozen so far but I only did it about an hour ago.
If anyone could offer any other suggestions in case it does freeze again I'd be very grateful indeed :0)
Oh - one thing I don't get is that only about 4 hours after my erase and install I did the disk utility once more (Repair permissions and verify) and it came up with the below list - which is huge given it was a fresh install. Not sure if the below info will help (not really sure what it's for tbh - but there it is.
Many thanks,
Vizzy
Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/AVC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/IIDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGAudioDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGLayer2AudioEncoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/Tundra.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/VDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AnnotationInspector.propPane/Contents/CodeResources ", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AudioSettingsInspector.propPane/Contents/CodeResour ces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/DataRefInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/HintTrackInspector.propPane/Contents/CodeResources" , should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/NetworkInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/SettingsInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/VisualTrackInspector.propPane/Contents/CodeResource s", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeComponents.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTimeJava/QuickTimeJava.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTime3GPP.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeH264.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeImporters.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG4.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeStreaming.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeVR.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.webplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QTKit.framework/Versions/A/Resources/QTKitIBPlugin.i bplugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Spotlight/QuickTime.mdimporter/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QuickTime.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be -rwxrwxr-x , they are -rwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .

According to Mactracker, your Mac could recognize 3 GB of RAM:
http://www.mactracker.ca/
One thing to check is your RAM usage while playing WOW. I am not a gamer, so I don't know if you can play with your Dock visible, but if you can, here is an easy way to keep track of your RAM usage.
Go to Activity Monitor (in your Utilities folder in your Applications folder) and put it in the Dock. Then while in Activity Monitor, go to View (in the menu bar)>Dock Icon and select "Show Memory Usage".
You want to see a lot of green in the pie chart. If you don't, you are running out of RAM and then the computer turns to your hard drive to fulfill the functions of RAM. This process is much slower, and I could see it resulting in freezes. If you find that the green virtually disappears while gaming, you could well benefit from upping the RAM by another 1 GB to 3 GB total.
Good luck!

MB990 and SL - Fan speed is not increasing automatically

Hi Guys,
Two days ago I changed my macbook's hard drive to a bigger one and did a fresh install of Snow Leopard.
As soon as I installed the SL I noticed my computer was running hotter than the previous installation. Without doing anything, my macbook is reaching 75C (167F).. I have already checked the activity monitor and no process is using the CPU. Now I realized that the fan speed is not increasing automatically, it is always fixed at 2000rpm even if the temperature reaches 72C.. I have already tried a SMC reset but the problem persists..
Does anyone know a solution for this? The problem is the fan speed that is not increasing..
I'm having to use smcFanControl to control de fan speed manually. Before the fresh install I was using Snow Leopard updated from the Leopard and I was not facing this problem.
Thanks a lot!

Hi there... i have the same problem. my temperature gets up to 75C with just one window open in safari or google chrome. I have downloaded smc Fancontrol but ...its not enough. have u solved this problem yet? i'm going in to the Genius Bar tomorrow to see if they can help.

MSI Max 2 BFIR; Problems with CPU Fan speed in PC Alert!

servus...
First of all, I have Bios version 1.3 from the .de support Page.
I don´t know, why .com.tw doesn´t have this version.
But here´s my problem:
PC Alert doesn´t show a CPU-fan speed!
The northbidge fan shows the fan speed roundabout 5000.
In BIOS CPU Fan ~2500
PC ALert versions:
4.005
4.006
Any ideas?
Thanks

Thank You for the reply,
Before the latest update to PCAlert4 it was working properly, I cross checked the reported info. to that of Sandra, MBM, and in the bios.
Also the temps are only swapped between the system temp. and the CPU temp., other than that they are correct.
Thanks,
John

MSI GTX 460 1 Gb OC & NiBiTor, fan speed mod

A dew days ago, i purchased an MSI GTX 460 1 GB OC graphics card.
This one:
http://hr.msi.com/product/vga/N460GTX-M2D1GD5-OC.html
Problem is, fan is too loud at idle. I've tried using MSI Afterburner but it won't let me
go lower than 40%, which is too much. As Svet is no longer able to mod BIOS (which i perfectly
understand when we look at number of requests he received daily ) i tried to do it myself.
I saved BIOS with GPU-Z and opened it with NiBiTor. I found an option to change minimum fan speed
from 40 to 30. But, problem is that NiBitoR puts red dot at the "integrity" check, immediately when
I open it. Does this means that NibiTor was unable to properly read BIOS information? Does this mean that I can't safely save a BIOS and will damage my card if I try to flash a card with modded BIOS?
NibiTor is version 6.02. My card is MSI N460GTX M2DIGD5
S/N 602-V232-150B1101136247

My e-mail? There is nothing there.
I think that GPU-Z has some problems saving my BIOS. When i use nvflash
saving option (from DOS), Nibitor shines a green dot whan i opened BIOS with it!
I've sent an e-mail with BIOS to Svet, but with the version extracted with GPU-Z. I think
that BIOS was corrupt...

Can't reach max (also with fancontrol) and min fan speed manually

I'm using fancontrol to control my fan's speed. One thing I noticed is that maximum fan speed is never reached even when temperatures exceed max limit.
If I set max temperature in /etc/fancontrol to 55 and restart fancontrol, 55+°C will cause fan to speed only at ~5800 RPM. If I set min temperature to 60, fans will completely stop. 'pwm_enable' is set to 1 when fancontrol is running.
Now if I stop fancontrol, fan will speed up to ~6460 RPM while 'pwm' is at 255 and 'pwm_enable' changed to 0. I can't change 'pwm' value at this point. If 'pwm' gets set to 0, fan will completely stop.
At this point fancontrol is still not running. If I set 'pwm_enable' to 1 and leave 'pwm' at 255, fan will slow down to ~5800 RPM. If I set 'pwm' to 0, fan will not slow down completely, but will instead slow down to ~2080 RPM.
What's interesting is that although fancontrol can't reach max fan speed, it can stop fan completely, while I can do neither manually.
Any idea how to enable at least max fan speed for fancontrol?

I'm using fancontrol to control my fan's speed. One thing I noticed is that maximum fan speed is never reached even when temperatures exceed max limit.
If I set max temperature in /etc/fancontrol to 55 and restart fancontrol, 55+°C will cause fan to speed only at ~5800 RPM. If I set min temperature to 60, fans will completely stop. 'pwm_enable' is set to 1 when fancontrol is running.
Now if I stop fancontrol, fan will speed up to ~6460 RPM while 'pwm' is at 255 and 'pwm_enable' changed to 0. I can't change 'pwm' value at this point. If 'pwm' gets set to 0, fan will completely stop.
At this point fancontrol is still not running. If I set 'pwm_enable' to 1 and leave 'pwm' at 255, fan will slow down to ~5800 RPM. If I set 'pwm' to 0, fan will not slow down completely, but will instead slow down to ~2080 RPM.
What's interesting is that although fancontrol can't reach max fan speed, it can stop fan completely, while I can do neither manually.
Any idea how to enable at least max fan speed for fancontrol?

Can 945P Platinum control on-board sysfan, nbfan and pwrfan fan speed?

I bought a couple of 8" case fans. These fans comes with a connector (with 3 wires) which i connect to the motherboard fan connectos (pwrfan, sysfan, nbfan). Using "SpeedFan" software, i can see the RPM of these fans and even my CPU fan. But it seems that i can only control the speed of the CPU fan, but not the other fans. I reduce the fans speed to "0" on SpeedFan but the RPM does not seems to be affected.
Can the RPMS of the fans be adjusted fron SpeedFan? ???

I too am having problems with Speedfan. My PL945 Neo5-F reports, in speedfan, the existence of 4 fans.
Looking in the manual to identify what's what, it states that it supports 3 fans - CPU, Sysfan2 and pwrfan2 - what happened to sysfan1 and pwrfan1?
Anyway, I managed to work out that although speedfan reports 4 fans, it seems only able to control cpufan1 (fan1) and sysfan2 (fan 2). Neither fans 3 and 4 map to pwrfan2 (what is being reported).
If anyone has cracked this nut, please let me know.
I suspect it is something to do with the address the other fans report to - but I don't know how to find and fix it.
Core Center simply crashes and won't let me do anything. In fact, I can't get the front end to even appear now, no matter how many times I uninstall and install it.
I'm running Vista HP with 2 gb and a core 2 duo 6550. Graphics is a Saphire Radeon 3600).

MSI P6NGM-L system temperature and processor fan speed

Similar Messages

Maybe you are looking for