MSI P7N Diamond can't SLI and Triple SLI in Vista x64?

Any brothers here can tell me what the issue with it?
Currently on Vista Ultimate x64 and using the nvidia 169.25_forceware_winvista_64bit_english _whql driver.
Can't SLI and don't even say about triple SLI.
plug in 3 x 8800gtx all can't work.

Quote from: Fadamor on 29-April-08, 03:46:22
Also check to make sure your power supply is certified to support 3-way SLI with 8800 GTX cards. I have a CoolerMaster Real Power Pro 1000 and it is not certified for 3-way with 8800 GTX cards. It IS certified for 3-Way with the 9800 GTX cards. The 8800 series apparently draws a bit more power.
Check the SLI-certified power supplies here: http://www.slizone.com/object/slizone_build_psu.html
i thou the PSU listed at Slizone is just a guideline? Oh men. Can't imagine i spend so much on the enermax psu and in the end i doesn't have enough juice for 3 cards.

Similar Messages

New Need Sink needed for MSI P7N Diamond nForce 780i SLi (Socket 775)

Hi Guys,
I've been having a problem with my machine where it will be working away as and then suddenly restart. I haven't been able to pin point the problem as it can happen regardless of applications or load thats on the machine. I've also run a couple of app's to check the RAM and its fine. The only thing I've been noticing is that the 4 cores of my Q6600 seem to be running a bit hot. On average on Idle there running between 45-55oc. Does this seem normal? I'm thinking that the cpu might be over heating when I'm running apps. I've seen one of the cores up around 68oc when under a bit of load. I'm using the stock heat sink at the moment and would like to cool things down it see if that helps. Can anyone recommend something suitable for my motherbroad.
Thanks
Garret

Quote from: Garret C on 15-October-09, 17:22:47
Intel Core 2 Quad Pro Q6600 "Energy Efficient SLACR 95W Edition" 2.40GHz (1066FSB)
MSI P7N Diamond nForce 780i SLi (Socket 775) PCI-Express DDR2 Motherboard with Free Creative X-FI Card
Thermaltake ToughPower 750W Modular Power Supply
My Q6600 (also G0/SLACR but don't know what you mean by "Pro") is OC'd to 3.4GHz and has had no problems running stable. Highest temps during OCCT/Linpack and LinX/Linpack peak at 80C 1st/2nd cores - 76 C 3rd/4th cores. Other tests (e.g. Prime95 small FFTs) run much cooler. I've run 2hr+ linpack tests with no errors, so I don't think you need to worry about your temps yet.
However, may I suggest that you check into is your power supply, in particular the modular connections. I had the ToughPower 750W Modular before upgrading to PCP&C. I noticed that the ToughPower's modular connections had a tendency to be just a tad loose. They wouldn't dislodge but they had a little bit of play. I could jiggle them ever so slightly while they were connected. As a result, the CPU power cable (8-pin/4-pin) would cause a restart upon the slightest disturbance or sensation. I've since discovered that modular connectors also affect the efficiency, power noise levels, and overall performance of a PSU. All in all, I plan to avoid modular connectors entirely going forward. Many newer cases have excellent cable management features and even old-style cases can be cleaned up with a little planning and effort. So the modular cabling advantages don't offset the severe disadvantages. Even if your problem isn't due to the PSU, it's something I'd recommend considering replacing.
Good luck. Hope all the suggestions are able to help you nail down and resolve your issue.

MSI P7N Diamond NVIDIA nForce 780i SLI 3-way brigde

3 Way SLI Connector Model 401-MB-0023-01
Hi there recently i received a package from your company with an motherboard MSI P7N
Diamond, nForce-780i SLI, i suddenly understood that there were not any kind of
3 Way SLI Connector! Therefore i am now asking how come there are none of this inside
your package and if i want to order a part! Where do i get it from? I asked EVGA they said
that they were chipping theirs sli bridges with their motherboard and said that is also what
your company do as well! So i ask you again how come there is no 3- way sli connector in
my package! Reason for this high priority is since i have 3 GTX 280 sli and i can't run 3
-way without this 3- way sli connector!
I live in Norway and i have been struggling with finding people who might be able to solve this problem for me!
So i would appreciate you and the company too have a look at this case and let me know if
its possible to get one from you! Without any money cost! And if it is possible to get one but
it will charge then, how much? Best regards From Halvor bø
Best regards From Halvor bø

Quote from: HU16E on 22-January-09, 11:42:33
Your board should have come with three SLI cables. Two short & one long to comprise the 3-way SLI bridge cables. Installation & full description can be found on pages 2-22 & 2-23 of your owners manual.

MSI P7N DIAMOND 780 SLI + Q9550 + CORSAIR DOMINATOR TWIN2X4096-8599C5DF + OVER

sorry my english write??
I need help to reach 3.60 Ghz?
My Configuration is:
MB MSI P7N Diamond NVIDIA nForce 780i SLI
CPU INTEL BX80569Q9550 Core 2 Quad Q9550 2.83 GHz 1333 MHz Socket 775 2 x 6MB
MEM CORSAIR DOMINATOR with DHX Technology TWIN2X4096-8500C5DF 4GB PC2-8500 (DDR2-1066) DDR2
HD 2 X SAMSUNG Spinpoint F1 HD753LJ 750GB SATA 7200 RPM 32MB em RAID0
Video Card BFG Geforce GTX 285 1GB GDDR3
cooler CPU V8 Cooler Master
Case HAF 922 Cooler Master
Power coolMax 950W
Can not pass the FSB 1520 (380) X 8.5 = 3.23 Ghz, I wonder what should I change to get the 3.60 Ghz?
my bios Configuration:
D.O.T. Control..........Disabled - dinamic Overcloking
Intel EIST..............Enabled
SLI-READY memory........Expert
System Clock Mode.......Manual
CPU Ratio Setting ......[8.5]
FSB Frequency ..........[1.520] 380 X 8.5 = 3.23 Ghz
PCIE Frequency .........[100]
DRAM Frequency .........[1066]
Advance DRAM Configuration: Manual
1st
CAS# Latency (CL) : 5
TRCD : 5
TRP : 5
TRAS : 15
TRRD : Auto
TRC : 30
TWR : Auto
TWTR : Auto
TREF : Auto
1T/2T NENORY TIMING : 2T
CPU Voltage .................[0.01250]
DRAM Voltage ................[2.10]
NB Voltage ..................[1.300]
SB Voltage .... .............[1.575]
NB Memory Reference Voltage .[1.045]
Memory Reference Voltage.....[1.075]
Memory Terminator Voltage ...[1.275]
CPU GTL Reference Voltage ...[Auto]
NB GTL Reference Voltage.....[Auto]
FSB Terminator Voltage ......[1.293]
SB Sleep Mode Voltage........[Auto]
PCIe Expander PLL Voltage ...[Auto]
CPU Spread Spectrum .........disable
thank you
Mollik

Quote from: HU16E on 01-October-09, 10:15:20
https://forum-en.msi.com/index.php?topic=118301.0
This is from awhile ago, but may have some ideas & settings that may be of use for you. The OC seemed to work better with a 1:1 ratio. Ram speed of 825 - FSB of 1650 in my case. It would not run stable at RAM speed 1066. 412.5 would net about 3.506 or so for you. Hope this helps.
thanks for the help, I think is the problem, the memory's, I will test and see how it

Msi p7n-diamond and coolermaster hyper48

Hi friends
Just wanted to know whether coolermaster CPU cooler Hyper48 will fit with msi p7n-diamond mobo with intel q6600.Will it work?
Kindly suggest

I can't answer specifically, but did purchase and install a Rosewill RCX-Z4 120mm 2 Ball CPU Cooler for my p7n board with an E8400 processor. I looked at that Coolermaster product but was a little concerned it wouldn't fit because of the heat pipes. I opted to use the Rosewill brand as it had a better form factor, and it vents out the top of my case.
My only complaint about the Rosewill is you can't get to the CPU power connectors on the board (8 pin) inside the case with the cooler attached. The fan assembly gets in the way.

HELP! - Voltages for Overclocking Q9450 on the MSI P7N Diamond (780i chipset)

Hey. I fully understand the settings as far as frequencies go, but am a total voltage newb. No matter what I do I cant seem to get a stable vista load up with my voltage settings.
Please help me by providing suggested voltage settings for my hardware.
CPU - Intel Core2Quad Q9450
RAM - 6 gigs of DDR2-800 rated at 2.1V
VIDEO - Dual Nvidia Geforce 8800GT's in SLI
MOBO - MSI P7N Diamond, based off the Nvidia Nforce 780i SLI chipset
My cooling is sufficient, and I have the BIOS version 1.2
I also turned off all of the overclocking not friendly functions, example: spread spectrum, and DOT, ETC....
I am trying to run my CPU at 3.2 GHZ (400 mhz before multiplier)
my settings I want are (as shown in the P7N bios)
System Clock Mode - Manual
FSB clock - 1600
DRAM clock - 800
Please help me by providing the proper voltages for my setup
Everything I need is marked by "???"
CPU Voltage - ???
DRAM Voltage - (already have, its 2.1)
NB voltage - ???
SB voltage - ???
NB Memory reference voltage - ???
DIMM memory reference voltage - ???
Memory terminator voltage - ???
CPU GTL reference voltage - ???
NB GTL reference voltage - ???
FSB terminator voltage - ???
SB sleep mode voltage - ???
PCI Expander PLL voltage - ???
For the sake of you not typing too much, if you specify voltages, any that you do not specify will be assumed to be left at [AUTO]
PLEASE help me by providing some voltages for me, as I have absolutely no clue what to put for them. If you have any questions about my hardware feel free to ask, and any help is GREATLY APPRECIATED

Quote from: nihilkrist on 08-October-08, 08:03:22
adjusting gtl ref. voltages isn't very difficult, but it is probably best to learn the basics first.
So, basically, increase the fsb a little. So, for example, from 1333 to 1400. See if it's stable, if it isn't try bumping up vcore one notch and try again. If not try Northbridge. Then later move on to stuff like the fsb term.
Test stability using prime95, there is a 64-bit multi-core aware version floating around somewhere. Try the ftp server linked to in the "hot use prime95" sticky on here.
Tbh with your OC you shouldn't need to touch any other voltages, or really use the gtl ref settings. What exactly is "sufficient" cooling though? Stock?
*EDIT: on a side note, just so you don't think I'm deliberately being awkward not telling you specific voltages, they wouldn't do you any good. Every cpu/mobo can handle different freq. at different voltages. Also, use cpu-z to check on your actual voltage and make sure you don't raise it beyond 1.3625 (I think that's right, it's 1.36something anyway)
Thanks for the tips. The reason I wanted to jump straight to FSB 1600 is because the MSI p7n is really picky and only likes 1:1 ratios.
My "sufficient cooling" is an aftermarket heatsink, high performance thermal paste, and MASSIVE airflow through my case. If you want specifics, its the Scythe Zipzang
Quote from: AaronYuri on 08-October-08, 09:05:16
CPU Voltage - No one can tell you this.
NB voltage - Depends on what frequency you want
SB voltage - What's your HDD setup?
NB Memory reference voltage - Auto
DIMM memory reference voltage - Auto
Memory terminator voltage - Auto
CPU GTL reference voltage - Depends on speed and other voltages
NB GTL reference voltage - Same as above
FSB terminator voltage - Depends on CPU voltage and CPU/FSB clock speed
SB sleep mode voltage - Auto
PCI Expander PLL voltage - Auto
My recommendation is do some reading. Guessing leads to dead hardware.
6GBs smells like mixing modules... Or do you have 3 modules?
First of all, I already stated the frequencies that I wanted in the top post, and fairly clearly at that.
CPU shouldnt be too hard to figure out, as there are very few to choose from. I'll try to get back to you on that one
I have 5, 7200rpm SATA 3.0 drives. It sometimes runs with only 4, as one is a hot swap.
My ram IS mixed, unfortunately. I'm using 2x 1gig sticks, and 2x 2gig sticks. However, both sets have heatsinks, and are rated at 800mhz, 4-4-4-12, 2t, timings. (2.1v)
I AM running them in dual channel.
If this helps you suggest voltages please do, If not, then I will just have to start trying using nihilkrist's suggestions.

MSI P7N Diamond I/O Shield missing

Hi,
I am attempting to build a new system but the I/O Shield for my MSI P7N Diamond motherboard was missing. Does anyone know where I can get a replacement.
New System Specs wil be:
Hiper/Novatech OSIRIS Tower
Hiper Power Type M 780w PSU
MSI P7N Diamond motherboard
Intel E8400 Core 2 Duo CPU
Western Digital Caviar Blue 320Gb HDD
XFX GeForce 9600GT 512Mb graphics card (eventually increased to SLI mode)
8Gb Patriot PC2-6400 800MHz ram
Creative XFI sound card
Pioneer Blu Ray DVD Reader
!6x DVD writer
Running Vista 64
Many thanks ~ Kevin

You can try reseller shops in your neighbourhood and see if they have any extra in stocks.

MSI P7N Diamond Burnt Out!

Hi,
It's now been a good few weeks for me trying to set-up a new computer after having replaced the motherboard a couple of times and buying better power supply etc. But I've now got a new issue with this P7N Diamond and it's the second time it's happened (already RMA'd it once before with same issue). Each time it's happened I've only had the basic items connected, power supply, motherboard, graphics card, memory, cpu and fans.
Basically what happens is that the computer powers on for a few seconds but there is an immediate burning smell from the motherboard. When I removed the motherboard I found that a thin strip of copper around the under side edge of the board, almost directly below the bottom fan connector (SYSFAN4), has burnt away exposing the cooper itself and split. I've checked for anthing shorting the board in the case and all the case/motherboard screws are in the correct place.
When it first happened I thought maybe its the PSU (I used my older Antec 470W on the first RMA'd board) or a faulty board, so I upgraded to the Corsair PSU and got the board replaced, but its now happened again!
Obviously I don't want this happening again so any idea what would cause this?
Would it be the fan connected to SYSFAN4? It's a Scythe Fan rated at 0.26A and I think I had it connected both times when the board blew. If it was the Fan how would a board allow this type of thing to happen, should it not have built in protection to stop things burning out like this?
Motherboard: MSI P7N Diamond
CPU: Intel Core Due Quad Q6600 G0
Ram: OCZ DDR2 8500 Reaper 4x 1GB Modules
Video Card: Zotac Geforce 8800GT 512MB AMP Edition
PSU: Corsair TX750W (3.3V-30A,5V-28A,12V-60A,-12V-0.8A,5Vsb-3A)
HD: 2x Western Digtial 200GB SATA 150, 2x Seagate 320GB SATA 300

Quote from: Fadamor on 10-May-08, 01:59:12
All my fans are plugged into the P7N. All of them came with the Cosmos case except the CPU fan which I bought seperately. So far (knock on polycarbonate), no "charco' for a mobo". (All fans are 120mm including the one I bought)
I read that the Cosmos although quiet is not too good at staying cool and lots recommended changing the default cosmos fans with better ones, so I changed them all to Scythe fans except the CPU fan, which is an Arctic Cooler 12 PWM Fan, as the Sycthe's don't have four pin plugs.
Quote from: Pchas01 on 10-May-08, 02:24:34
And, curious, why are you plugging a Scythe fan into the #4 conector? There are three others closer to the CPU if you're cooling the CPU). I use all 4 connectors with no issues at all. Last question, is it a 5v fan, 12v fan..? Ah, good luck with the Stryker if that's what you want..it's a good board.
I have about five Scythe Fans and one Arctic Cooling CPU Fan. The AC CPU Fan was using the CPU Fan connector and the other four connectors had the Scythe fans attached. I just thought it had something to do with the #4 connector because the burn out was so near. The Scythe fans are 12v, could that be the reason?
Yeah I got the Striker II board now, but seem to be having the issue I original had with my first MSI P7N board with the Coolermaster PSU it just flashes on for split second and cuts out. I thought having this Corsair 750W PSU I wouldn't have that issue any more. As soon as I plug in my cheap gfx card it works fine! I just seem to have no luck at the moment. (Yes I've got the gfx power plug in )
Quote from: NovJoe on 11-May-08, 12:57:46
Sound like a surge shorting either from the fan or the chassis.
Try removing some of the unneccessary standoffs and see if problem re-occurs. 2 boards can't have the same problem repeat that easily.
I only had the standoffs for the nine holes in the board so should not have had anything shorting it out.
I got a ASUS Striker II now anyway and so far it works, but I'm only powering the CPU Fan from the board now, all the others I'm going to do direct through the PSU. Just need to get it working with Geforce 8800GT now.

MSI - P7N Diamond ESATA doesn't work under XP

I have 2 P7N Diamond motherboards and am running XP Pro/sp2.
I have never been able to get the esata ports to work. I have spent the last 4 months RMAing boards back and forth to MSI. I have tried at least 4 motherboards, 3 esata external drives, and 3 cables (all 6 feet).
Sometimes on the upper port (lower port doesn't work at all), the drives get detected in bios as gibberish. Other times it is listed correctly in post, but then I get a "9th slave hard disk error". I press F1 to resume, enter the bios, and the drive shows up. The drive never gets detected in windows, however.
In bios I have the Extra IDE/RAID Controller enabled and RAID mode is set to IDE.
In XP I have the JMP36X IDE Controller installed.
During all this time, MSI Tech Support has insisted that I am doing everything right. I called them last night and they mentioned doing an rma yet again, but when I called back today and talked to someone else, he told me that esata only works under vista in AHCI mode. He said that it won’t work under XP in IDE or AHCI mode.
Hope someone can help me!!

Thanks for the reply.
Quote from: NovJoe on 19-July-09, 17:51:41
Have you tried to install the RAID controller driver using F6 option by using the XP installation disc?
I did that when I installed XP.
Someone provided this link to set up AHCI mode. Plan to try that in the next day or two.
http://http://expertester.wordpress.com/2008/07/27/how-to-enable-ahci-windows-xp/

MSI P45 Diamond : Question about voltages and straps.

Hi,
Before I start a post with my overclocking problems I want to learn more about the board and have a few questions:
1. OC Jumpers: What do they exactly do, do the increase any voltages, do the change the nb strap or do they only increase the fsb. If they do not change the strap, when/where does the board change it 266/333/400?
2. What is the maximum safe voltages for the mch,ich,fsb?
3. New BIOS: Does anyone know when can we expect one or where can I download a beta that is newer than 1.4.
Ok, my problem is that I can overclock past 390. I can get 400 but it is not stable in windows. I first want tolearn how the board works before I discuss my oc problem.
PC Specs:
MSI P45 Diamond (v1.4 Bios)
Intel Q9300 (ran 2000fsb on a xfx 780i)
4x1gb Transcend aXeram DDR3-1800+
Zalman 850W power supply
XFX GTX 260 XXX
Xfi Titanium
Thanks

Quote
1. OC Jumpers: What do they exactly do, do the increase any voltages, do the change the nb strap or do they only increase the fsb. If they do not change the strap, when/where does the board change it 266/333/400?
The jumpers change the strap & the FSB Frequency:
When you have an FSB-266 MHz processor and put the jumpers into the 333 MHz position, the FSB Clock Speed will be forced to 333 MHz and the BIOS treats the CPU as though it is an FSB-333-MHz Processor, that means even after a CMOS Clear, the FSB Clock Speed will be 333 MHz and FSB/Memory Ratio will be adjusted automatically based on that strap and the SPD Tables of your memory modules.
Quote
2. What is the maximum safe voltages for the mch,ich,fsb?
The Intel Datasheet for the P45 Chipset should give you a basic overview on voltage ranges. However, you may need to exceed these ranges, in some cases, depending on your overclock to keep the system stable. You will find nobody, that will seriously be willing to tell you the "maximum safe voltage" as every voltage increase is potentially dangerous to your the components. Welcome to overclocking.
Quote
3. New BIOS: Does anyone know when can we expect one or where can I download a beta that is newer than 1.4.
The latest BETA I know about so far is v1.5b1.
Quote
Ok, my problem is that I can overclock past 390. I can get 400 but it is not stable in windows. I first want tolearn how the board works before I discuss my oc problem.
Please give a full overview of your Cell Menu settings if you need suggestions.

P7n Diamond + Q6600 = Reboots over and over

I have a P7n diamond that has been in my system paired with E6850 for a while now and been running no problem. Well I picked up a Q6600 and put it in and now it reboots everytime when it starts to go into windows. No errors or anything.. Just poof and reboot.. Will sit in the bios all day long and temp in bios is 21 to 23 celcius. Anyone have any suggestions for me. I have put all the bios settings on Auto just trying to get the machine to load windows. does the same thing with Windows Vista and Windows 7. Startup screen comes up and churns and right when screen is supposed to switch to windows it reboots... Thanks for all suggestions...
p7n diamond
4gb kingston hyperx
Q6600
PCP&Cooling 750 silencer
Raptor Drives
Oh well nevermind... i went back to the e6850.... After reviewing the forum and all other google searches its evident the q6600 and p7n diamond don't play nice together....

Quote from: gsoutherland on 07-February-09, 01:53:46
I tried that and everything else I could think of. I under no circumstances could get it to get past the vista or windows 7 startup screen. I OC'ed, underclocked, left stock, and anything else you can think of. I finally gave up and went back to my E6850. I'll do my research before I purchase another CPU. After looking around I see a lot of Q6600 users have problems with the P7N Diamond.
One thing I did not try was a different Bios. I'm running v1.2. Do you think that could have been it? And what is the latest bios. I know that 1.2 is the latest official. I saw a 1.23 but saw somewhere it said it was older than 1.2 so I did not download.
Thanks for your suggestions.
Ok I can't stand this beating me.. I'm back with the q6600 and rebooting. no changes helps. has there been cases where a cpu just won't work with a motherboard?? I put the e6850 back in and boots fines. I put the q6600 in other system boots fine. just will not boot on my p7n diamond board. I've flashed to latest beta 1.3 bios. I've reset cmos.. i've done everything i know to do and no luck....

P7N Diamond & 9600 GT SLI

Hi,
Small question.. Does the P7N Diamond support two 9600 GT (asus) in SLI mode?
Probably does, but could I get a confirmation on this, because in the manual of the P7N, dual cards in SLI are connected with 2 SLI bridges..and the 9600 GT only has room for one bridge....
Thanks in advance!

Thanks for the quick reply!

MSI P7N Diamond - New PC Build - Need Help Posting

I just finished connecting my P7N Diamond out of the case and powered on my new build for the first time and saw BIOS version, HDD information, and the bad checksum message on the screen. I also saw the "Press DEL to enter BIOS" and the "F2 To Continue" messages.
Pressing the DEL key on the keyboard resulted in nothing happening at all. I soon realized that the keyboard wasn't responding and I had no num lock light at all after pressing the Num Lock key multiple times. I started with a generic, USB keyboard and then swapped keyboards to an older, still working one I had with a PS/2 connector.
Still no keyboard lights but magically it entered BIOS after I plugged it in the PS/2 socket and immediately asked if I wanted to exit BIOS without saving. Pressing the "Y" key did nothing. Pressing <ESC> did nothing. The keyboard seemed frozen.
I pressed the RESET button on the motherboard and this caused a re-boot but now with a black screen (no messages at all). I powered it down, removed the power cords and then pressed the "clear CMOS" button. Re-connected the power cords and powered it on; but still a black screen. Powered it down, removed the power cords and removed the battery for 1 minute (I even pressed the clear CMOS button again). Re-connected the power cords, powered it up and still have a black screen.
I know this is the place where all the experts hang out, so any help will be appreciated.

Just an update...
New build is working very well at this point.
I've set the voltage in BIOS to 2.1 for the memory and installed Vista Ultimate, updated it via Windows Update site, applied the memory patch. I've discovered that I have a bad stick of memory as no matter what slot I place this one stick of memory in, the PC fails to post, so I'm running with 3x1GB sticks. I've ordered new memory that should be here today; Corsair TWIN2X4096-6400C5DHX.
The only problem I've encountered thus far is with one of my NVIDIA RAID arrays in "Degraded" status (mirror broken). This happened after I had applied the latest MS patches and a re-boot. I didn't suspect a HDD failure because the drives are new and the status of each drive was displaying as HEALTHY. I did my research on this site and discovered the solution which was to delete one of the two drives (I chose the one with the least amount of data) from the array and then added it back into the same array. The re-build took about 2 hours (they are 400GB Segate drives) and now it's working as advertised. I suspect a software problem caused this as one of the two drives was showing that it had less data (used) than the other drive.
My next steps are to install the new memory, test it with memtest86+ and then begin the OC ritual.
Thanks again for your help, Jason and Aaron Yuri.

IPhone 3G and Outlook 2007 sync Vista x64

Hi,
I pre-ordered two iPhone 3G a week ago (still not received them) and then went online to read user opinions about it. and, honestly, the scared me.
First, battery life. I'm Samsung SCH-i760 (Verizon) smartphone user and I'm pretty happy with it. With small battery it last the whole day - some browsing, some phone calls and some software which I have installed on it like my database application which syncs with my PC (CodeWallet). I red that iPhone 3G should be charged at least twice a day otherwise you'll risk to stay without it in the afternoon.
and
Second, most important for business-oriented user like me - I'm Outlook-addicted and use it all the time for contacts, tasks and appointments, and I do it on both smartphone and my PC with Vista 64-bit.
So my question is does anybody tested it on Vista x64? Does the Outlook problem with sync exists on this OS version also? Although MS Office 2007 is 32-bit application it work on 64-bit OS and uses different drivers/application to communicate with devices. I simply cannot spent days playing with issues like this....and will stay probably with my existing provider (Samsung is Windows Mobile 6 device and there is no problems sync anything with any Windows).
Thanks.

Sorry, I can't help with Outlook 2007 although I use MS Exchange with Outlook 2003 SP3 with not troubles.
You cannot save files to the iPhone and I wouldn't expect this in the new 3.0 firmware. There are several apps that allow you to save/access files from your home computer or a cloud server. I use Box.net.
Message was edited by: paulcb
Message was edited by: paulcb

Can't install Premiere Pro CS3 in vista x64!

Hi
I'm trying to install Adobe Premiere Pro CS3 trial version on my system Vista Ultimate X64, every time I run setup.exe that extracted on my desktop it load for few seconds, loading and then it close with no reason.
There's no error code or any message after it close. and I'm also pretty sure that my system met recommended requirements. I'll upload dxdiag anyway.
I just were on my way to buy this product but I said ill try it as long as there a trial version, thanks to "trial versions" idea that adobe presents to us.
Anyway, what is my problem, what's wrong?

I have to agree with Aanarav but I haven't suffered the same USB audio problem. My Rode mic works fine.
I've loaded CS3 Production Premium on Vista x64 and suffered no ill effects at all. My projects are longform (documentary) and the greatest benefit so far is the drastically reduced rendering times (mind you that's a quad core with 8Gb of memory.) Apart from the Adobe suite I can run GPU based programs like ProDad's Vitascene and many others concurrently without affecting processing speed all that much. For the first time I can actually run Prem Pro and Avid liquid at the same time (not too well mind you) and that's a feat.
As to all the "questions" Vista may ask the solution is simple - turn them off.
There's a lot of rumours about "lack" of drivers but this is changing daily and I don't have one piece of hardware/software from XP that can't run on Vista x64 including my 14 year old HP Laserjet 6p printer. The only hardware I needed to replace was my Lide30 Canon scanner (2 years old).
Oh! the nVidia x64 bit video drivers are a treat.
Vista x64 - faster than a speeding bullet (if you have a half decent machine)

MSI P7N Diamond can't SLI and Triple SLI in Vista x64?

Similar Messages

Maybe you are looking for