MSI P7N2 Diamond with 9450... Questions!
I passed from an EVGA 790i Ultra to a MSI P7N2 Diamond (Same Chipset but the MSI is far more stable).
I would like to set my Q9450 to 3.2GHz. I was at 3.2 on my Evga.
I was wondering if one of you has some bios settings for this frequency on the P7N2? (core voltable, MCP voltage, etc)
Quote from: titom91 on 21-August-08, 19:40:45
No, Those values where when I was on a EVGA 790i Ultra... And the 1.3625V was because the system was lowering the Voltage on the cores... What i mean is that when you were setting for example 1.3V, the system was set at a lower voltage and when the system was not idle anymore, the cores couldn't reach the voltage they needed (the voltage set and the maximum voltage possible where not the same).
I am currently on overclocking my MSI board... I just got the ram stable at 1600 and atacking on the CPU...
What i wanted by setting this post is to know what range of voltages and frequencies people who had the same setup were having... to compare when done...
I know the voltage drops, vdroop, but 1.3625 is mental all the same. Mine's at about 1.32 for 3.4Ghz, and I can run it at much lower voltages for 3.2
What voltages/settings have you tried with the MSI board? And my board runs fine at 400fsb, if you want to see if there's an fsb hole just drop down to 395 (1580qdr) or something.
Similar Messages
-
MOVED: MSI P7N2 Diamond with 9450... Questions!
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=119207.0Quote from: titom91 on 21-August-08, 19:40:45
No, Those values where when I was on a EVGA 790i Ultra... And the 1.3625V was because the system was lowering the Voltage on the cores... What i mean is that when you were setting for example 1.3V, the system was set at a lower voltage and when the system was not idle anymore, the cores couldn't reach the voltage they needed (the voltage set and the maximum voltage possible where not the same).
I am currently on overclocking my MSI board... I just got the ram stable at 1600 and atacking on the CPU...
What i wanted by setting this post is to know what range of voltages and frequencies people who had the same setup were having... to compare when done...
I know the voltage drops, vdroop, but 1.3625 is mental all the same. Mine's at about 1.32 for 3.4Ghz, and I can run it at much lower voltages for 3.2
What voltages/settings have you tried with the MSI board? And my board runs fine at 400fsb, if you want to see if there's an fsb hole just drop down to 395 (1580qdr) or something. -
MSI P7N2 Diamond vs PSU Silver power 850W
Halo!
I bought MSI P7N2 Diamond and set it witch PSU Silver Power 850W.
I would like to ask you whether the value of V is normal. Especially at +12 Vol.
The voltage values read in Bios.Bios version 1.1 and something here does not agree.
System is not stable sometimes hangs..
Please help. The power supply is new but I have concerns about the power supply,
because this is the first one of the 5 motherboards which worked in this configuration..
PSU Value:
ELECTRICAL PARAMETER
Model / Type SP-S850
AC-Input 100 - 240 VAC; 60/50 Hz 12/7A Active PFC
DC-Output +3.3 V +5 V +12 V1 +12 V2 +12 V3 +12 V4 -12 V 5 Vsb
Max. Amps 24 A 28 A 20 A 20 A 20 A 20 A 0.8 A 3 A
Max. combined 180 W I 816 W I 20 W
Total Power 850 W
Voltage Values
CPU Core 1.14 V
+3.3 V 3.26 V
+5 V 5.01 V
+12 V 2.64 V
+3.3 V Standby 3.30 V
VBAT Battery 3.06 V
GPU Vcc 3.21 V
QuadCore Intel Core 2 Extreme QX9650, 3000 MHz (9 x 333)
MSI P7N2 Diamond (MS-7523)
DIMM1: G Skill F3-10666CL7-1GBPI
DIMM2: G Skill F3-10666CL7-1GBPI
HyperTransport 200.0 MHz
PCI 33.3 MHz
PCI Express 100.0 MHz
MAC PHY 125.0 MHz
SATA PHY 100.0 MHz
Audio/Modem Codec 24.6 MHz
USB2 Controller 48.0 MHz
PIT / ACPI Timer 14.3 MHz
Graphics Processor Properties
Video Adapter XFX GeForce GTX 285
BIOS Version 62.00.45.00.30
GPU Code Name GT200b
Bus Type PCI Express 2.0 x16 @ x16
Memory Size 1 GB
GPU Clock (Geometric Domain) 691 MHz (original: 690 MHz)
GPU Clock (Shader Domain) 1548 MHz (original: 1552 MHz)
RAMDAC Clock 400 MHz
Pixel Pipelines 32
TMU Per Pipeline 1
Unified Shaders 240 (v4.0)
DirectX Hardware Support DirectX v10
Pixel Fillrate 22112 MPixel/s
Texel Fillrate 82920 MTexel/s
Memory Bus Properties
Bus Type GDDR3
Bus Width 512-bit
Real Clock 1296 MHz (DDR) (original: 1300 MHz)
Effective Clock 2592 MHz
Bandwidth 162.0 GB/sBios show this voltage value..
Quote
Voltage Values
CPU Core 1.14 V
+3.3 V 3.26 V
+5 V 5.01 V
+12 V 2.64 V
+3.3 V Standby 3.30 V
VBAT Battery 3.06 V
GPU Vcc 3.21 V
various win programs show the same value
i dont have anything else
Quote from: Mike on 28-July-09, 01:16:12
If it really was 2.64V on the +12V rail, your MOBO wouldn't even post. That reading is a wrong reading. What are you using to check the voltages? What is shown in the BIOS?
i really had serious problems .Two A..S Striker 2 Extreme down ,2 MSI P7N2 diamond mobo down {[3 x ( start,5sec -> freze)] and no post anymore} And suddenly the third P7N2 Diamond working.
Nothing changed. How to explain this? -
Can I use 4GB RAM on my MSI K8N Diamond with Windows 7?
Can I use 4GB RAM on my MSI K8N Diamond with Windows 7? I have put 4GB DDR 1 in my motherboard but windows 7 says (2.75GB usable)...
Regards, JayIt depends highly on how much hardware (add-in cards) you have installed. If you have two VGA-cards, then it's likely that usable memory stays below 3GB. If you take some hardware out, you will see the usable memory increase a bit, but you won't reach the full 4GB. It will go as far as about 3.25 or so.
-
hi,
My P7N2 Diamond won't boot. when i first tested it at my friend's house, the problem already occurred. but i was not sure if it was complete bricked because the processor we used was listed supported only under the new bios.
so i brought it home and tried it with an older processor, the E6300 . still no luck.
one thing i noticed, every time i power up the board, the hdd_led, power_led, and standy_led are turned on all together. BUT, i have no HDD attached....
what could possibly wrong with my motherboard? btw, the memory i used is a Kingston DDR3 kvr133303n9/2g
any advice/help will do. thanksQuote
Yes it's barebone setup. just proc , mem, vid card, psu, ps2 keyboard.
out of the pc case too?
Quote
Yes it worked before but i am unsure what setup was before. a friend gave this to me. just upgraded to i5 so he gave it to me.
worked before with what parts? what is changed? -
MSI P7N2 diamond M/B stuck on the m/b flash screen on start up.
Hi, my problem is that my motherboard (p7n2 diamond) is staying on the screen that is supposed to come up for about 3 seconds on start up, it wont let me get into the bios or anything, because my keyboards aren't working with it for some reason. Ive tried both usb and ps2 keyboards, neither work. I am pretty sure that i have connected all the internal cables correctly. If anyone could give me any suggestions to why its not working, or even how to fix it, would be appreciated. Thanks.
>>Posting Guide<<
-
MSI P6N Diamond with E8400 EIST
Running the p6n diamond with the E8400 and I can not seem to get the EIST to work. I try to enable it in the bios, but once I exit it goes back to disabled. Even with the F4 in the bios, I do not see any options for the C1 feature. Currently I have my CPU OCed to 3.6GHz, but that is recent and I could never get the EIST to work even at stock speeds.
Bios version 1.3 btw
System
Vista 64 bit Ultimate
P6N Diamond
E8400
2x2GB OCZ SLI ram 6400
500GB WB SATAII HDD
XFX 9800GTXQuote
but just not EIST staying enabled.
That means, if you re-enter the BIOS Setup after you have saved & exited it, your changes are lost? All of them or just "Intel EIST" in the Cell Menu?
Quote
because the OCing voltage/FSB is changing
Can you be more specific about what values are actually changing and under which condiditions? Try to give a more detailed explanation of what is actually going on there.
Quote
I could not find C1E support anywhere before even with F4 in the bios, is it suppose to be there?
It should be under "CPU Features". Press F4 multiple times while you are in that BIOS Section.
Quote
People have said there is suppose to be an "EIST" option in there, but I have never seen it.
There is no "EIST" option in there. -
I want to buy P7N2 Diamond. Kindly tell me this about its availability.
Not yet seen in SG as well.
I'll give and take a few more weeks before it hits the shelves. -
Msi k2n9 diamond raid problems/questions
Hi, yesterday I bought 2 hard drives western digital 1 TB Caviar Blue 32mb cache each and wanted to make a raid stripe array, so they work as one and are twice as fast.
I had problems installing windows XP, so I tried windows 7. It detected the raid array, partitioned it, and installed the windows, but in the device manager I got other devices -> RAID Controller and no drivers for it. I also have a Coprocessor, but that may be the chipset drivers, that I didn't install yet.
The windows 7 is currently installed on the array, but I can't really see the performance difference. All disk information tools say it's currently 32 cache, shouldn't it be 64? And the speed is the same ~ 40-60 mb/s copy rate, 100mb/s sata-sata transfer rate.
With windows XP I tried installing the extra drivers from the web site from a floppy drive during installation, but the installation didn't detect the array at all.
Can somebody give me a clue how to fix my problem? And if you have any idea what software can I use to check the raid transfer rate and proper performance?Quote from: Fredrik on 28-October-10, 02:45:27
Hello! It is a bit "dangerous" to help someone without knowing what the system looks like. What little you said, K2N9 motherboard, doesn't exist. Have a look here http://www.msi.com/index.php?func=prodarchive&maincat_no=1 Go to the title "AM2", because a fair guess lands you there. In order to help with your driver questions we need to know what the drivers are for, you see. An alternative would be to go to Nvidia's site, where you can pick most things you need: www.nvidia.com.
Coprocessor? Might it be - if you in fact have a processor - there are more than one core?
The cache thing is a little new to me, but one must remember you have one disk now, not two. Partitioning deals with the first bytes of data on this single hard disk, and not with the "RAM" memory.
Noticing a difference can be hard, but if you were to return to no-RAID status you will, for a little while, hate the longer boot-up time and slower start of programs. Since it runs at all, 100 mb/s read time is not out of order.
well i misplaced the numbers, it's k9n2, it's not that big mistake, and I know my system well. I have two disks, but one array, and i think the cache must be 2x, because the idea of raid 0, simultaneously writing bits on both disks. The logical idea is that if you write something to e drive with 32 mb cache you will be able to write the same thing on two drives with 32 mb cache each which makes it 64 mb
The coprocessor part is solved, after I installed the chipset drivers, but the raid thing is still there. -
Hi to all,i have purchase a QX9770 i am waiting for the delivery,i just want to know when i will install the new cpu do i have to change my jumper to 400mhz fsb or leave it to deafult mode,now i have a Q9550 on this board and is on the deafult mode witch is the same with cpu fsb 333mhz the QX9770 is 400mhz fsb,thanks.
Quote
default setting for diamond is 200 to 333. please have alook at eh manual you will that i am correct. it is in the manual
That is not correct. The Default Jumper Setting is called "Default".
Quote
1- 200 to 333 mhz the two at the back
2- 333 to 400 mhz the two in the front
3- and 400 ..........up .(no jumper at all)
Nope, there are more than that:
Quote
i just want to know when i will install the new cpu do i have to change my jumper to 400mhz fsb or leave it to deafult mode
Leave it on the default setting. The BIOS should automatically set the FSB Clock Speed to 400 MHz. If it does not do that, you can still remove the jumpers. -
P6n Diamond with q6600 question
I currently own an Asus Striker extreme and it sucks at overclocking Quad cores to put it nicely. I was looking at the P6n Diamond board and was wondering what kind of Overclocking to expect on it for a quad core.
Thanks for the reply. Appears it is plagued with the same issue as my current board after reading that. The only ones i've see that fixed the problem are EVGA and XFX but thier board layout doesn't work for me.
-
MOVED: Can I use 4GB RAM on my MSI K8N Diamond with Windows 7?
This topic has been moved to AMD64 nVidia boards.
https://forum-en.msi.com/index.php?topic=133409.0It depends highly on how much hardware (add-in cards) you have installed. If you have two VGA-cards, then it's likely that usable memory stays below 3GB. If you take some hardware out, you will see the usable memory increase a bit, but you won't reach the full 4GB. It will go as far as about 3.25 or so.
-
MOVED: MSI P7N2 diamond M/B stuck on the m/b flash screen on start up.
This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=141751.0>>Posting Guide<<
-
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13
Windows 7 Pro, latest updates.No problems here on that page: Gélinotte huppée
The server doesn't seem to send an encoding, so make sure that you have selected Western (ISO-8859-1) on that page if that isn't your default encoding.<br />
You can also try: View > Character Encoding > Auto-Detect > Universal -
MSI P7N Diamond with Tharmalright ultra extreme
Hi guys
Will this heatsink fit on this motherboard?Hello malik22 and welcome to the forum!
Yes the Ultra Extreme will fit on the mainboard. http://www.thermalright.com/new_a_page/product_page/cpu/mcl/ultra-120-mcl.htm#msi780i
Maybe you are looking for
-
Hi all, We have a table like this: create table tblSales (sku varchar2(100), selling_date date, sales_vol integer );Records in this table will be like this: SKU1 15-JUL-07 300 SKU2 15-JUL-07 400 SKU3 15-
-
How do I remove an old - unworking computer from my home sharing account
I recently had a PC expire. It was on my list of computers that made up my home sharing account. I need to remove that old computer from that account so that I can add the new computer. The old computer does not work anymore so I cannot access the
-
My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happe
-
What is the input "key" in the IMAQ Write Custom Data palette?
Hello! I am not able to use correctly the IMAQ Write Custom Data palette because I do not know what is the input "key". Does anyone know its meaning? Sincerely, Fábio Machado Cavalcanti Canada-Brazil Science Without Borders Student Lakehead Universit
-
Domain index query takes 12 hours to execute
Hi Friends, My query which uses domain index takes 12 hours to execute. Can you please help me tuning this query? select /*+ NO_UNNEST ORDERED index_ffs(Term idx_recanon_term_ysm1) parallel_index(Term, idx_recanon_term_ysm1, 8) */ term.rowid from cmp