MSI P965 Neo-F Motherboard w/ Antec 450W SmartPower 2.0

Does this power supply work with MSI P965 Neo-F motherboard?
http://www.antec.com/us/productDetails.php?ProdID=26450
THANKS!

Yes, it will.
It also depends on the hardwares that you are going to setup together with the system.
I would prefer you to get this http://www.antec.com/specs/TPII480_spe.html

Similar Messages

MSI P965 Neo-F reboot problems

Hi,
I have a MSI P965 Neo-F motherboard in my PC, everything works great except for one thing, rebooting.
When i reboot or reset, it shuts down the operating system/BIOS, after that the PC stays on but my screen stays black.
Does anyone know a solution?
Thank you,
ghostrider090
full specs:
Core 2 Duo E6600 (overclocked to 3GHz)
MSI P965 Neo-F
2x Kingston Value Ram PC5300 1GB
Club3D Geforce 7950GT 512MB
Huntkey 450W (modded with coolermaster fan)
Samsung SH-S182D
2x Western Digital Caviar SE 250GB 8MB

I dont know solution ...
i see the problem in mobo or revision of P965 itself ... there is many problems with restarts, reboots, first boot. It depend on version of BIOS you have, but i not found any version which solve this for me ...
i using v1.9 now ... and i have problem with boot after hybernation with vista..
after turning my computer off (in vista is normal to hybernate and shut down) i can boot my computer .. by its very strange. So, power comes up, but then instantly comes Windows Vista with logon screen - NO posting by BIOS, no RAID initial screen, no scaning for hardware... it comes instantly to windows - but windows are in some inconsistent state and i cant login (freeze/BSOD ... but pointer can be moved by mouse and login button shows efect if i move pointer over - so windows are in memory and working) ... in this state is HDD led all time ON (shining) ... i can shut down and boot up again and everything is OK (windows are normaly restored from disk)
with older v1.5 BIOS ... my computer goes to same state like is described here - BLANK ... and BIOS setting was reseted
so and here is one similiar problem
https://forum-en.msi.com/index.php?topic=100524.0
and one my thread .. its particly about this
https://forum-en.msi.com/index.php?topic=107722.40

MSI P965 Neo-F mobo and ASUS EAH4850/HTDI 512MB

Hi I have the MSI P965 neo-f motherboard and I am interested in buying a new graphic card for my computer. But I am concerned about compatibility issues of my motherboard with different graphics cards. Currently I am interested in buying the ASUS EAH4850/HTDI 512MB graphic. Does anybody knows if my motherboard will work with this card? Did someone had any issues.
Thanks in advance,
phanosp

Hi NovJoe,
Thanks for the reply. As far I can tell the card is backward compatible with PCI-E 1.0. I just wanted to ask if someone has actually used this card with my mobo to make sure that there are no compatibility issues.
Thanks,
phanosp

MSI P965 Neo-F Bios doesnt recognize my DVD RW driver,Help!

Hi,
I just bought a MSi P965 Neo-F motherboard and when i boot the pc because bios cant find the DVD driver and
i cant start my windows xp 64.
I thought og upgrading bios but i cant because i dont have floppy driver and my cd drive is unknown for bios.
DVD model: NEC DVD RW ND 3540 A
system info:
Maxtor 120gb
Duo core 2 E6400 2.13
Corsar 1024 DDr II 2X512
Asus PhysicX
Gforce7800GT 256
Help!
plz..

Quote from: Zimbower on 14-February-07, 18:50:18
Hi,
yes i do get the green message about the dvd in green color after the memory check(MSI logo)
somthing like ODD0 DVD RW
I will try the second option you recommended,thx alot.
Hello, welcome to forum. if you are planing to update BIOS:
get P965 Neo BIOS ver. 1.6 CD Image (have modded boot record and integrate JMB361 Dos drivers.)
How do i flash it?
Extract image file from archive, and burn it to CD.(example: open it with nero burning rom and burn image file to CD)
Make and ensure PC is stable, then reboot PC and boot from CD. you will need to confirm twice BIOS update when asked.
after BIOS update is complete successfully, power down your PC, remove power cord from the PSU, hit few time power button to drain electrify from capacitors, touch some metal with hands to discharge any ES which you may have, then open the case and Clear CMOS then pull back power cord, and turn on your PC, will be notice CMOS CHEKSUM MISMATCH/ERROR, hit F1 to continue to rebuild DMI Pool Data, then reboot your PC, and enter in BIOS and LOAD BIOS DEFAULT, SAVE AND EXIT, go back to BIOS and apply your customs settings.
if you want to use USB key to flash BIOS, copy AWFL865.EXE & W7235IMS.160 to USB drive, reboot PC and boot from bootable location, (hold "SHIFT" key when starting loading from bootable device to bypass startup files to avoid loading memory managers and other applications) navigate to folder which containt flash program and BIOS file and type from there:
AWFL865.EXE W7235IMS.160 /cks/sn/py/cc/cd/cp/wb/ld/qi/f/e

MSI P965 Neo-F Sata & IDE presentation (& boot options)

hi,
I have purchased a MSI P965 Neo F motherboard.
http://www.msicomputer.co.uk/Product...3735&cat_id=77
I have flashed the bios to the lastest 1.18 revision.
If you look at this board, you'll find it has 5 SATA ports.
- 1 SATAII port by JMicron JMB361.
- 4 SATAII ports by ICH8.
Questions:
1.) The machine only appears to be able to boot from the 1 jmicron sata port.
2.) within the bios any disks plugged into the board on the other 4 ports show up as "ide" disks, this could be wording or this could be some cheap bus trick

Hi, thanks for responding,
Quote
no wrong with "ide", as SATA ports on ICH8 are detected as IDE devices, (as opposed to detected as SCSI device).
could you clarify this, I think its just the "no wrong" line, what do you mean by this.
Quote
No, the machine is able to boot from any JMicron port, including PATA port.
there is only 1 jmicron sata port, so my initial comment was aimed at you can only boot from this 1 sata port - not the other 4 ich8 ports, I assume thats correct from your comment.

MSI P965 Neo-F and Mushkin HP2-5300 High Performance Dual SDRAM

This is my first post so hello all.
I am going to buy a MSI P965 Neo-F motherboard for my custom build computer.
I have a question.
The Mushkin Hp2-5300 High Performance Ram needs 1.9v of Power and has CL 4-4-4-10 Timings.
I was wandering if it will work on the MSI motherboard.
Best regards,
Toby

Quote from: b3atofang3l on 19-October-06, 09:44:26
It is a special order. Meaning it will take up to 4 weeks to arrive. SOB.
I know i am annoying but i am terribly sorry. Can there be other choices such as different brands or the one priced at 229.99?
Thanks
"I know i am annoying but i am terribly sorry."
you are welcome mate.
for 229.99 nop :D but for 229.95 yes this one my second choice: http://www.memoryexpress.com/index.php?PageTag=&page=file&memx_menu=EmbedProductDetail.php&DisplayProductID=8182&SID=
but different isnt much from 1st choice its 40$ only which is nothink when we start getting a monitor. if you can sped better get 1st one.
here is another option, but personally im little reserved to Acer product:
http://www.memoryexpress.com/index.php?PageTag=&page=file&memx_menu=EmbedProductDetail.php&DisplayProductID=8660&SID=

MSI P965 Neo - Bios?

Anyone got a bios for MS-7235 that has fixed the bugs?

Quote from: wconstantine on 22-January-07, 03:36:12
I'm running bios version 1.6.62 with the motherboard MS-7235 aka. MSI P965 Neo. E6600 @ 2,7 GHz (300x9) FSB:DRAM 1:1.
Corsair Value S. PC5300 DDR2 2048MB Kit w/two matched Value Select 1024MB running at 600 Mhz. Dual Channel.
450W PSU.
3V 3,31V
+5 5,33V
+12 11,96V
Vcore is at 1.325V by default.
vdimm at 1.9V
Stock cooler idle 39 degrees and 59 at load with orthos prime95 for dual core.
That should be enough of system information?
The bug I have! If I take my FSB to 301 it just dies. I have to reset bios in order to make the computer work again. 300+ and it's gone. I've tried BIOS and Windows clocking. The only difference is that in Windows I don't have to reset bios
I've disabled Speedstep, C1E, Spread Spectrum, HPET and I'm running my memories at "auto" timers. I've tried with manual there but same problem. The memories run at 4-4-4-12 533mhz in bios but in Windows it shows 1:1. So 600Mhz.
This is not a bug....it's normal, Intel are not like AMD that have divider in CPU....the low value for ram it's 533, that it mean at default memory go at 266 like FSB at 266. RAM:FSB = 1:1. RAM 667 are RAM:FSB = 5:4 . RAM 800 are RAM:FSB = 3:2 .
Probably you have not understand this and like functions intel system and you think is a bug! :P

MSI P965 Neo-F (MS-7235) problem booting from USB flash drive

Hi, all!
I was wondering if someone can help me. I am trying to install Windows 7 x64 on my 320GB HDD that is connected to my MSI P965 Neo-F (MS-7235) mobo (The CPU is a Core2Duo 6600 with 6GB of RAM). I created a bootable USB 8GB flash drive using Microsoft's "Windows 7 DVD USB Download Tool" and bootsect.exe (Needed to create a boot sector on the USB drive) from the MS store. I successfully tested the resulting bootable USB drive using freeware MobaLiveCD (Sorry, you'll have to Google "mobalivecd" since this forum doesn't seem to allow external links) running under Windows XP SP3 x86 (32bit). Under MobaLive's QEMU, Windows 7 setup loaded its files and produced an error message basically saying that it could not install Windows 7 x64 under an x86 OS (No surprise there since QEMU is emulating a 32bit processor - The point is that the bootable USB drive I created works).
I then went into my mobo's CMOS and under Advanced BIOS Features -> Boot Sequence -> 1st Boot Device, set the value to "USB-HDD" and rebooted my machine. The USB drive probably was not detected by the mobo under that setting because it proceeded to boot from my HDD which is the 2nd Boot Device. I repeated the same process using each one of the four USB ports in the rear of the mobo (I don't have the optional USB panel that the MSI users manual mentions) to no avail. I also tried setting the 1st Boot Device to "USB-FDD" and repeated the process for each USB port but the mobo still will not boot from the USB drive (It does not recognize it). When I set the 1st Boot Device to "USB-ZIP" and rebooted, the mobo hangs after "Verifying DMI Pool Data ..." which is no surprise since I am not using a USB ZIP drive but a USB flash drive. It appears that under that setting, it recognizes that there is a USB device attached but it is expecting a response (From a USB ZIP drive). I had no idea it would be this frustrating to boot from a USB flash drive! If anyone knows how to make this mobo boot from a USB flash drive, please let me know. Any assistance would be greatly appreciated. Thanks!

Quote from: RemusM on 12-June-14, 17:51:30
The P965 Neo motherboard is 8 years old, so don't expect miracles. .... You need to format the USB stick in the proper way. You may use this utility to do it: hxxp://www.prime-expert.com/flashboot/ Also, it's a good idea to use the first (USB0) connector (controlled by Intel ICH8) for the USB flash drive. Good luck.
Thank You for your fast response, RemusM!
I'm not looking for a miracle. I'm just looking for a mobo that does what it is supposed to do: Allow me to boot from a USB flash drive (I don't think that is too much to ask for even from a board that was made in 2006)!
Thanks for recommending FlashBoot. I see under their "Why FlashBoot" section that it "... does not shift to user the burden of choice between "USB-ZIP" and "USB-HDD" at format time and proper BIOS setup at boot time. ... and every USB disk is formatted in such way that it will work in every environment properly, regardless of current BIOS setting.", so I will give it a try and let you know about the results afterwards.

MSI P965 Neo onboard Realtek HD audio has no sound

I just bought a new MSO P965 neo-f motherboard with the built-in 7-1 Realtek HD audio and I have no sound.
Windows detects it and I have installed the latest realtek driver (v1.49). Everything looks fine, but there is no sound, as if its all muted.
I have tried different speakers, but no result.
Does anyone know how to fix this problem?

Quote from: Me27 on 16-November-06, 17:43:28
The other soundcard is in a box, not connected to the motherboard, due to a lack of PCI slots. I really do no understand the choice of MSI to only use 3. I personally would have needed atleased 5 slots, but could not find any (MSI) bord with 5.
It comes down to a change in technology that is happening, Me27. 6 or 7 years ago you would have found most motherboards with 3 PCI and 2 or 3 ISA slots. Then we went to 5 or 6 PCI when ISA pretty well faded. Over Time AGP came out and took the place of one of these PCI slots since you no longer needed one for graphics.
Now we have PCI Express for the graphics, but the technology for PCI-E has also started to be implemented for many components that were previously PCI only. So now we are changing technology again and you have 3 PCI and 2 or 3 available PCI-E slots.
As time goes on you will probably start to see more and more boards that contain more PCI-E slots and less PCI until standard PCI fades and the next technology comes along.
It's part of changes to technology.

MSI P965 Neo and Noctua NH-U12F or Scythe Infinity 1000

I'm running MSI P965 Neo as the title says and now when I've began O/C:ing I need a better cooler than the Intel Stock Fan for my E6600. Anyone knows if you can fit a Noctua NH-U12F or Scythe Infinity 1000 without any space problems on this motherboard?

Quote from: Maesus on 24-January-07, 00:20:07
I like massive fan because it's very quiet!
And cheaper I'll go with infinity!

Best Ram for MSI P965 Neo-F

Hi
I've a MSI P965 Neo-F and i want to know what is the best DDR 2 Memory for this motherboard(G-Skill,Crucial or OCZ?).
Actually i' ve Corsair DDR 2 667 Mhz Value Select.
Thanks^^

Quote from: stixen on 31-January-08, 22:12:39
Actually Corsair does'nt work good with my PC(no boot sometimes) so i don't want Corsair...
I'm not saying buy Corsair, I am telling you to buy WINTEC AMPO 240-Pin DDR2 SDRAM 800. I have read all the horror stories about different ram and the Neo f. I installed 2gb [2x 1 gb] when i made the computer a couple years ago and just added the same thing 1 week ago and never a single problem. It still only reads as 3.25gb but that has been explained. Fast and stable memory with this board is hard to find, so trust me and buy this ram . it worked perfect for me so I don't see why it wouldn't work for you.
Here's a link http://www.newegg.com/Product/Product.asp?Item=N82E16820161172

MSI P965 NEO-F and power supplys

Hello, I just bought the MSI P965 NEO-F and Cooler Master iGreen 500W but when, after I unpacked it all and was about to start building, I discovered that in the manual, under the power supply tab, it says that this moderboard requires a power supply that comes with a -5V pin supply. I didn't see that when I looked in the online manual.
However, when I looked in the PSU manual I saw that there should be a -5V pin in pinnr. 20 on the ATX connector. So I was relieved. But when I looked at the ATX connector there was an empty hole where pinnr. 20 were supposed to be. Does that mean that I can't use the power supply with this moderboard?

hmm...you could replace your brand new PSU with another PSU? i don't know in your country, but here, we're allowed to replace bought items (no refund though, just replace) to another item of equal or higher value (but add money for higher value, of course )
i'm using the Hec Winpower 550W PSU on that same motherboard, and is working fine for me.
otherwise, you could go to your local PC store and have them plug everything for you? (here it costs around US $6 to ask someone to assemble everything)

Msi p965 neo-f and geforce 9600gt

I've got question.
When I look at the spec from my new xfx geforce 9600gt xxx card I see PCIe x16 2.0
Will this card work on my motherboard ? because when I look at the spec of my board I can see that there is 1 PCIe x16 slot and no 2.0
Will it work?
spec pc
Msi p965 neo-f
intel core 2 duo E6400 @ 2.13ghz
Geil 2gb 800mhz
coolermaster 400watt psu

Quote
check Amperage on +12V rails (you sum up 2 rails)
Simply adding the amperage values if there are multiple +12V rails is not the right approach to determine the maximal amperage limits for all +12V rails. You cannot simply sum up the two rails. On many PSUs, the combined amperage limit is significantly lower than the sum of the individual rails. Look at this example for instance:
If you add the amperage values on both rails together, you get 34A. However, the limit for both +12V rails (as stated on the PSU sticker) is 250W which can be broken down to 250W / 12V ~ 20.8A. So what we have here is a 20.8A limit on a +12V rail that is split into two individual rails that each have their own amperage limit. You can put 16A or 18A load on the individual rails, but not more that ~20A combined load on both. That means that if the system draws 15A from one of the rails, only ~5A are left for the other one.
Quote
coolermaster 400watt psu
He did not mention which model he is referring to, so I am not sure if I checked the correct specs. Here is a link to the Cooler Master eXtreme Power Plus 400W (RS-400-PCAR/PCAP-A3) for comparison:
http://www.coolermaster.com/products/product.php?language=en&act=detail&tbcate=22&id=3765
As you can see, we have two +12V rails (16A/18A) and a combined limit aif 280W [280W / 12V ~ 23A] ... not 16A + 18A = 34A(!). Of course 23A could be be enough to power a core 2 duo and a 9600GT but we are most probably approaching the limit of the PSU here. He did not mention the number of optical drives, hard drives and fans connected to the system. Each of these devices is powered by the +12V rails as well and will have their share of resources.

MSI P965 Neo-F & JEDEC Memory

Hellow,
Remeber me? I bought a system with a MSI motherboard a while ago.
I have a question for my little bro's Christmas Build.
i was wandering if JEDEC Memory works on the P965 Neo-F
On the site i am buying from, it said "may or may not work with JEDEC specifications".
Here is the memory:
Mushkin EM2-5300 Enhanced DDR2 SDRAM, 2GB Dual Pack (2x1GB)
Thanks

Quote
my question is does MSI P965 Neo-F support JEDEC memory.
The question is not whether the board supports JEDEC memory, but whether the memory in question complies with JEDEC standards.
MSI's statement refers to the fact that many modules on the market require out-of-spec voltage and timings to run, often in spite of their own labeling. e.g. if your DDR-II memory module requires 2.0v, this exceeds JEDEC's 1.8v +/- 0.1V spec for DDR-II. Or, if your DDR-II memory module is labeled as a 1.8v part, it may actually require 1.9v to run. JEDEC also specifies timings at each speed grade, which not all modules conform with; PC2-4300 (DDR2 533) should have 4-4-4 timings, while PC2-5300 (DDR2 667) should use 5-5-5 timings.
Most of the 1st Tier DRAM manufacturers sell their own modules that comply stringently with JEDEC voltage and timings (Samsung, Infineon/Qimonda, Hynix, Micron). These modules are more expensive than those from 3rd Tier module assemblers or marketers such as OCZ and Corsair, whose modules often need excessive voltage just to reach their rated speed (because the chips are inferior grade).
This is why the memory validation lists of mainboard and chipset manufacturers typically are over-represented by genuine modules from the 1st Tier DRAM manufacturers like Samsung or Infineon, rather than the 3rd Tier module assemblers or rebranders.

Can i get MSI P965 Neo (MS-7235) for 1333fsb support by updating bios?

Hi,
Im new in this forum hope this is right place to ask this.
I got motherboard: MSI P965 Neo (MS-7235)
So it only supports 1066fsb?
I have e6850 processor, so can i get this motherboard to support that processor by updating bios?
according to this msi.com
it says fsb 1333, why?
cpu-upgrade.com
this site says 1066....

Quote from: duudeli111 on 13-September-14, 03:54:54
according to this msi.com
it says fsb 1333, why?
http://www.msi.com/product/mb/P965_Neo.html#hero-specification
• Supports FSB 1066/800 MHz
http://ark.intel.com/products/27730/Intel-82P965-Memory-Controller
Supported FSBs : 1066MHz

MSI P965 Neo-F Motherboard w/ Antec 450W SmartPower 2.0

Similar Messages

Maybe you are looking for