MSI P965 Neo video error. Bios text miscolored

Intel Pentium 4 630 3.0GHz HT (2MB), S775
MSI NEO-F P965 Intel S775 Motherboard
1GB PC2-5300 667MHz DDR2 RAM
VIDEO CARDS: NVIDIA: 256MB GeForce 7600 GS DDR
Windows XP Home
I suspect problem was caused after a light cleaning of case and fans with compressed air.
Ever since booting normally results in 'infinite loop' reboots. Although booting in VGA and Safe modes remain successful. Though in these modes I am limited to using the lowest display settings, changing them results in reboot. Furthermore since this problem began the text in BIOS POST is no longer all white, but white and orange. See Pic:
I've ran memtest, updated bios and chipset, chkdsk, tried many video card drivers, and inspected board and card for physical damage. I suspect the problem is on the mobo and not the video card due to the weird text in POST.

Quote
I suspect problem was caused after a light cleaning of case and fans with compressed air.
What did you use? A can of compressed air or an industrial air compressor ?
Air compressors do not deliver clean air and they have a tendency to cause static build up on the components that the air is blown onto.

Similar Messages

MSI P965 Neo motherboard New Bios version 1.7

Hi all,
I have notice that msi has release a new bios, version 1.7, for the p965 neo mobo. Has anybody tried it and has any info to share with us?
I want to upgrade but I am not sure if this is a good upgrade. Does anyone knows what is the "Intel Presler SL9QR CPU" fix so I choose to upgrade or not?
Thanks a lot,
Phanos

Quote from: Phanos on 02-April-07, 03:26:51
Hi all,
I have notice that msi has release a new bios, version 1.7, for the p965 neo mobo. Has anybody tried it and has any info to share with us?
I want to upgrade but I am not sure if this is a good upgrade. Does anyone knows what is the "Intel Presler SL9QR CPU" fix so I choose to upgrade or not?
Thanks a lot,
Phanos
create a sig, https://forum-en.msi.com/index.php?topic=25959.0
never flash a bios that includes updates that donot apply to you, NEVER.

MSI P965 Neo-F Bios doesnt recognize my DVD RW driver,Help!

Hi,
I just bought a MSi P965 Neo-F motherboard and when i boot the pc because bios cant find the DVD driver and
i cant start my windows xp 64.
I thought og upgrading bios but i cant because i dont have floppy driver and my cd drive is unknown for bios.
DVD model: NEC DVD RW ND 3540 A
system info:
Maxtor 120gb
Duo core 2 E6400 2.13
Corsar 1024 DDr II 2X512
Asus PhysicX
Gforce7800GT 256
Help!
plz..

Quote from: Zimbower on 14-February-07, 18:50:18
Hi,
yes i do get the green message about the dvd in green color after the memory check(MSI logo)
somthing like ODD0 DVD RW
I will try the second option you recommended,thx alot.
Hello, welcome to forum. if you are planing to update BIOS:
get P965 Neo BIOS ver. 1.6 CD Image (have modded boot record and integrate JMB361 Dos drivers.)
How do i flash it?
Extract image file from archive, and burn it to CD.(example: open it with nero burning rom and burn image file to CD)
Make and ensure PC is stable, then reboot PC and boot from CD. you will need to confirm twice BIOS update when asked.
after BIOS update is complete successfully, power down your PC, remove power cord from the PSU, hit few time power button to drain electrify from capacitors, touch some metal with hands to discharge any ES which you may have, then open the case and Clear CMOS then pull back power cord, and turn on your PC, will be notice CMOS CHEKSUM MISMATCH/ERROR, hit F1 to continue to rebuild DMI Pool Data, then reboot your PC, and enter in BIOS and LOAD BIOS DEFAULT, SAVE AND EXIT, go back to BIOS and apply your customs settings.
if you want to use USB key to flash BIOS, copy AWFL865.EXE & W7235IMS.160 to USB drive, reboot PC and boot from bootable location, (hold "SHIFT" key when starting loading from bootable device to bypass startup files to avoid loading memory managers and other applications) navigate to folder which containt flash program and BIOS file and type from there:
AWFL865.EXE W7235IMS.160 /cks/sn/py/cc/cd/cp/wb/ld/qi/f/e

Is MSI P965 Neo-F supports DirextX10 video cards...

Is MSI P965 Neo-F supports DirextX10 video cards?
what are the video cards supported in this board?
Thanks in advance for your reply...

"Any AGP card works in any AGP slot."
not exactly.. there is an exception with too old AGP slot which use 3.3V and too old AGP VGAs respective.
@hackfinn
can you complete rest of your PC specification, e.g. CPU, PSU and so on.. and what VGA you are planning to get?

Updated: 08/05/07 - MSI P965 Neo-F Latest Official and BETA BIOS!

Dear All,
I've got an info from one of MSI Engineers for the DDR 800MHz RAMs support for MSI P965 Neo-F mainboard.
There'll be a BIOS v1.40 that enables the mainboard to support 1GB DDR 800MHz modules.
Another upcoming BIOS v1.50 will fixed the 2GB limitation on the board, allowing the board to run up to 4GB of DDR 800MHz RAMs.
I'll update this thread on any upcoming details that I can get.
I can't confirm when the BIOS will be officially released so please kindly have the patience to wait.
Best Regards,
Joe Chow.
Added by Maesus:
beta BIOS 1.62 http://rapidshare.de/files/33337455/7235v162.rar.html (link provided by BOSSKILLER)
Updated by NovJoe:
MSI P965 Neo Beta BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html (link provided by BOSSKILLER)
Updated by NovJoe
MSI P965 Neo Beta BIOS ver. 1.69(Date: 06/10/06)
http://rapidshare.de/files/35481679/W7235IMS.169.html (Link provided by dryhte)
Updated by NovJoe
MSI P965 Neo Beta BIOS ver. 1.69(Date: 06/10/06)
http://members.cox.net/garikfox/W723516F.rar (Link provided by garikfox)
Updated by NovJoe
MSI P965 Neo BIOS v1.6 - Official MSI Released BIOS (Date: 17/12/06)
http://www.msi.com.tw/program/support/download/dld/spt_dld_file_record.php?folder=1&kind=1&name=7235v16.zip
Updated by NovJoe
MSI P965 Neo Beta BIOS ver. 1.6H (Date: 03/02/07)
http://necromanthus.com/docs/MSI-P965-Neo.html (Link provided by hexxer)
Update by NovJoe
MSI P965 Neo BIOS v1.8 - Official MSI Released BIOS
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=265
Update by NovJoe
MSI P965 Neo Beta BIOS ver. 1.91 (Date: 08/05/07)
http://www.mydatabus.com/public/dejanos/z/W7235IMS.rar (Link provided by dejanos)
Update by NovJoe
MSI P965 Neo BIOS v1.9 - Official MSI Released BIOS (Date: 11/05/2007)
http://global.msi.com.tw/index.php?func=downloadfile&dno=5550&type=bios

heres some picture proof for you guys just so nobody doubts me
E6300 can scream pretty good at 2.8Ghz
http://img521.imageshack.us/img521/1691/400mhzfsbcb0.jpg CPUID
http://img521.imageshack.us/img521/1047/400mhzfsb2qx2.jpg CPUID
http://img178.imageshack.us/img178/2179/3dmark0513krv2.jpg 3DMark05
http://img521.imageshack.us/img521/347/holycrapqf1.jpg Aquamark 3
http://img452.imageshack.us/img452/5691/untitled1fk7.jpg SuperPI

MSI P965 Neo - Bios?

Anyone got a bios for MS-7235 that has fixed the bugs?

Quote from: wconstantine on 22-January-07, 03:36:12
I'm running bios version 1.6.62 with the motherboard MS-7235 aka. MSI P965 Neo. E6600 @ 2,7 GHz (300x9) FSB:DRAM 1:1.
Corsair Value S. PC5300 DDR2 2048MB Kit w/two matched Value Select 1024MB running at 600 Mhz. Dual Channel.
450W PSU.
3V 3,31V
+5 5,33V
+12 11,96V
Vcore is at 1.325V by default.
vdimm at 1.9V
Stock cooler idle 39 degrees and 59 at load with orthos prime95 for dual core.
That should be enough of system information?
The bug I have! If I take my FSB to 301 it just dies. I have to reset bios in order to make the computer work again. 300+ and it's gone. I've tried BIOS and Windows clocking. The only difference is that in Windows I don't have to reset bios
I've disabled Speedstep, C1E, Spread Spectrum, HPET and I'm running my memories at "auto" timers. I've tried with manual there but same problem. The memories run at 4-4-4-12 533mhz in bios but in Windows it shows 1:1. So 600Mhz.
This is not a bug....it's normal, Intel are not like AMD that have divider in CPU....the low value for ram it's 533, that it mean at default memory go at 266 like FSB at 266. RAM:FSB = 1:1. RAM 667 are RAM:FSB = 5:4 . RAM 800 are RAM:FSB = 3:2 .
Probably you have not understand this and like functions intel system and you think is a bug! :P

Can i get MSI P965 Neo (MS-7235) for 1333fsb support by updating bios?

Hi,
Im new in this forum hope this is right place to ask this.
I got motherboard: MSI P965 Neo (MS-7235)
So it only supports 1066fsb?
I have e6850 processor, so can i get this motherboard to support that processor by updating bios?
according to this msi.com
it says fsb 1333, why?
cpu-upgrade.com
this site says 1066....

Quote from: duudeli111 on 13-September-14, 03:54:54
according to this msi.com
it says fsb 1333, why?
http://www.msi.com/product/mb/P965_Neo.html#hero-specification
• Supports FSB 1066/800 MHz
http://ark.intel.com/products/27730/Intel-82P965-Memory-Controller
Supported FSBs : 1066MHz

MSI P965 Neo-F (MS-7235) problem booting from USB flash drive

Hi, all!
I was wondering if someone can help me. I am trying to install Windows 7 x64 on my 320GB HDD that is connected to my MSI P965 Neo-F (MS-7235) mobo (The CPU is a Core2Duo 6600 with 6GB of RAM). I created a bootable USB 8GB flash drive using Microsoft's "Windows 7 DVD USB Download Tool" and bootsect.exe (Needed to create a boot sector on the USB drive) from the MS store. I successfully tested the resulting bootable USB drive using freeware MobaLiveCD (Sorry, you'll have to Google "mobalivecd" since this forum doesn't seem to allow external links) running under Windows XP SP3 x86 (32bit). Under MobaLive's QEMU, Windows 7 setup loaded its files and produced an error message basically saying that it could not install Windows 7 x64 under an x86 OS (No surprise there since QEMU is emulating a 32bit processor - The point is that the bootable USB drive I created works).
I then went into my mobo's CMOS and under Advanced BIOS Features -> Boot Sequence -> 1st Boot Device, set the value to "USB-HDD" and rebooted my machine. The USB drive probably was not detected by the mobo under that setting because it proceeded to boot from my HDD which is the 2nd Boot Device. I repeated the same process using each one of the four USB ports in the rear of the mobo (I don't have the optional USB panel that the MSI users manual mentions) to no avail. I also tried setting the 1st Boot Device to "USB-FDD" and repeated the process for each USB port but the mobo still will not boot from the USB drive (It does not recognize it). When I set the 1st Boot Device to "USB-ZIP" and rebooted, the mobo hangs after "Verifying DMI Pool Data ..." which is no surprise since I am not using a USB ZIP drive but a USB flash drive. It appears that under that setting, it recognizes that there is a USB device attached but it is expecting a response (From a USB ZIP drive). I had no idea it would be this frustrating to boot from a USB flash drive! If anyone knows how to make this mobo boot from a USB flash drive, please let me know. Any assistance would be greatly appreciated. Thanks!

Quote from: RemusM on 12-June-14, 17:51:30
The P965 Neo motherboard is 8 years old, so don't expect miracles. .... You need to format the USB stick in the proper way. You may use this utility to do it: hxxp://www.prime-expert.com/flashboot/ Also, it's a good idea to use the first (USB0) connector (controlled by Intel ICH8) for the USB flash drive. Good luck.
Thank You for your fast response, RemusM!
I'm not looking for a miracle. I'm just looking for a mobo that does what it is supposed to do: Allow me to boot from a USB flash drive (I don't think that is too much to ask for even from a board that was made in 2006)!
Thanks for recommending FlashBoot. I see under their "Why FlashBoot" section that it "... does not shift to user the burden of choice between "USB-ZIP" and "USB-HDD" at format time and proper BIOS setup at boot time. ... and every USB disk is formatted in such way that it will work in every environment properly, regardless of current BIOS setting.", so I will give it a try and let you know about the results afterwards.

MSI P965 Neo board failure ?

I have the P965 Neo board running perfect for two years, for a few weeks ago the system didn't startup, a long beep sound came from the MB. I opened the case, checked connectors etc. and replaced the memory modules. After that the system runs ok, no problem occurs for almost three weeks.
For a few days ago, out of the blue, the system didn't startup: error message: "WARNING Have option ROM can not be invoke (Vendor ID: 10Ech, Device ID:8167h)"
I reset the system and it passes the POST, the WINDOWS XP splash screen shows up but after a few seconds the blue progress bar stops.
I reset the system again and now the WINDOWS XP splash screen stays fade out, no progress bar
I reset the system several times, after a few times the system normally boots up and is ok.
I tested the HD with Speedfan Smart utility and it is found ok. Also no virus etc is found. I checked the device manager, no driver problems.
Yesterday the system had the same problems (XP boot blue progress bar stops, sometimes the progress is very slow) but after a few restarts the system boots normal and is ok.
Tonight, after I had opened the case to measure the voltages, I startup the system but no problem occurs. The 12V and 5V are ok
I think I have a hardware problem but I'm doubt what hardware (MB,RAM,PSU,processor) causing this kind of problems.
Can you help me ?
thanks,
Herman
My system:
MSI P965 Neo-F
Intel Core2Duo E6400
XFX Geforce 7600GS
DIMM 2x1GB DDR2/533 Nanya
XP SP3
BIOS W7235 IMS V1.5

Quote from: NovJoe on 03-July-09, 21:57:34
Clear CMOS and try booting the system again.
Was the system like this from Day 1 or this only happens after something has been done?
Thks NovJoe ....
The system had run without any problem for more than 2 years.
I presume I have a connection problem on the MOBO or other hardware. If I place the PC case in the cabinet under my desk, the problem occurs. If I have the PC on the floor there is not any problem. It also happens only when the PC is cold.
I asked my hardware supplier, he suggested to test the hardware with a special self booting hardware test CD. It will cost 40 euro. I searched for such a CD on internet but didn't find one special for MSI boards. Do you know where I can get such a CD ?
regards,
Herman

Memory not fully working on MSI P965 NEO

I've build a new computer and everything is working fine exept for the DDR2 memory.
Specs
- MSI P965 Neo, bios 7235ims v1.5
- Memory, 2x 512 Mb PQI, Dual channel DDRII, 533
- Intel core 2 duo, 6400
When starting it only reports 256Mb of RAM memory.
I've tried putting the memory in the different dimms and in all combinations. This makes no difference.
Any help to get the full 1Gb will be greatly appreciated.
M

When I put in just 1 module, doesn't matter which one, and into which socket, the computer runs, but there's no screen. So it doesn't work with just one.
I upped the voltage to 2.0V and manually put in the timing. No difference at all.
Also I ran Memtest, and it displayed 255M of memory, and an error using test nr 4. When I did the specific memory tests on test 1 it said 255M, test 2 showed 621M and than freezed with lots of errors, and test 3 freezed immeadiatly.
So can I conclude the memory is broken or can Memtest not handle this memory.

[SOLVED!] DVDRW can't burn on JMicron IDE (MSI P965 Neo)

-----------------------------
edit: i have solved it! i changed my IDE cable (i originally used the IDE cable that came with my dvd-drive, which was a 40pin IDE cable) with the 80pin IDE cable that came with the motherboard. installed jmicron driver, and i can burn now. no more errors from nero
I have an LG GSA-H10N DVD writer.
it's connected on the only IDE slot in MSI P965 Neo motherboard.
Nero Express log file says:
=== Scsi-Device-Map ===
DiskPeripheral : ST380811AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10N JL10 JRAID Port 4 ID 0 DMA: Off
i asked around, DMA should be turned on, says all other forums.
Jmicron RAID controller is installed. all jmicron drivers installed.
how to turn on DMA?
bios is set to IDE (and not RAID/Disabled).
please help. this is giving me headaches. i have lost money thinking i bought defective dvds to burn on, only to find out DMA is not ON (and i can't turn it on anywhere).

I wouldn't call this "solved" would you? Mabe patched...
Yes I am having the same problem:
If I use the Intel IDE drivers, you *can* burn, but it takes literally at least an hour MIN per DVD. Also it maxes out @ 6X for ripping audio CDs. Yes, and this cripples your entire system, everything is super slow, even the mouse is choppy. One of your CPU's will also be maxed out @ 100%. Sound may be also affected while using any DVD drive.
If I use the "latest" 1.14 JMicron Drivers, I can't burn at all. Windows "says" it's a DVDRW, but there is no burn tab under properties, and Nero or other applications say there is no burner (but the "virtual" ISO burner). However, I can rip at full speed again, no choppy, so sound issues.
Here is a picture of what Device Manager looks like BEFORE you install JMicron Drivers and AFTER:
http://www.hificomputers.net/hifi/Images/before_after.jpg
I Have tried messing with PIO modes and DMA in bios and windows. Nothing.
I have tried messing with DVD burner's firmware, nothing.
I have tried editing the registry and "forcing" windows to see the DVD Burner as a burner to FORCE the "burning" tab to come back, but still this doesn't affect anything. Still can't burn.
MSI do NOT use JCrapon again! Just search for jmicron in this forum and see all the problems with them! I've had at least 6 MSI boards and this is the first one I've not been satisfied with just because of JMicron. I don't know if this is a Bios fixable issue, but it seems like it should be a JMicron Drivers issue.
Harass JMicron Here:
(tech support email )
[email protected]
Keep me posted.
September 23

MSI P965 Neo PCI-e lock?

Hi!
could any of you tell me whether or not the MSI P965 Neo-F board has an option to lock the PCI-e clock?
My plan is to tweak the FSB to 333 (which implicates a 333/266 = 25% overclock), which I've read is more then easy to obtain with a Core 2 Duo 6300. I just don't wanna ruin the rest of the system by getting a PCI-e busspeed of 125.
So I'm really curious if this board has either a build-in lock @ 100/101, or some option in the BIOS to lock the bus.
Thanks!

well you could just try raising your fsb to 333Mhz and see what happens. done it with mine no problems at all no other tweeking either. lots n lots of people have done the same without a problem.
check out the overclocking and modding forum here, n see for yourself.

MSI P965 Neo-F reboot problems

Hi,
I have a MSI P965 Neo-F motherboard in my PC, everything works great except for one thing, rebooting.
When i reboot or reset, it shuts down the operating system/BIOS, after that the PC stays on but my screen stays black.
Does anyone know a solution?
Thank you,
ghostrider090
full specs:
Core 2 Duo E6600 (overclocked to 3GHz)
MSI P965 Neo-F
2x Kingston Value Ram PC5300 1GB
Club3D Geforce 7950GT 512MB
Huntkey 450W (modded with coolermaster fan)
Samsung SH-S182D
2x Western Digital Caviar SE 250GB 8MB

I dont know solution ...
i see the problem in mobo or revision of P965 itself ... there is many problems with restarts, reboots, first boot. It depend on version of BIOS you have, but i not found any version which solve this for me ...
i using v1.9 now ... and i have problem with boot after hybernation with vista..
after turning my computer off (in vista is normal to hybernate and shut down) i can boot my computer .. by its very strange. So, power comes up, but then instantly comes Windows Vista with logon screen - NO posting by BIOS, no RAID initial screen, no scaning for hardware... it comes instantly to windows - but windows are in some inconsistent state and i cant login (freeze/BSOD ... but pointer can be moved by mouse and login button shows efect if i move pointer over - so windows are in memory and working) ... in this state is HDD led all time ON (shining) ... i can shut down and boot up again and everything is OK (windows are normaly restored from disk)
with older v1.5 BIOS ... my computer goes to same state like is described here - BLANK ... and BIOS setting was reseted
so and here is one similiar problem
https://forum-en.msi.com/index.php?topic=100524.0
and one my thread .. its particly about this
https://forum-en.msi.com/index.php?topic=107722.40

MSI P965 Neo-F + DDRII 800 TwinX (2x512mb) issue

Hi, ive recently built a new system a couple of days ago and im having a few issues with it... i 'presume' it may have something to do with ram/mobo compatability.
Heres my system, no oc'ing:
MSI P965 Neo-F
1Gb (2X512Mb) Corsair TwinX DDR2 PC6400 (800) @ 5-5-5-18 1.85V (mobo default)
480W power supply
The issue seems to be that during boot up the system loads into windows XP then after about 20-30 secs the system will reboot itself for no reason (no event log), then it kinda has a set of mini reboot fits during POST.
After the system has settled down it will boot into windows XP fine and i have no further issues at all... it runs all my games/apps perfectly.
Can anyone shed any more light on this issue ?

first, stop the board from auto-rebooting, by going to Control Panel , System Properties, Advanced, Startup and Recovery, uncheck "Automatically restart". See what the bluescreen error code is. That would help a bit.

MSI P965 Neo-F Sata & IDE presentation (& boot options)

hi,
I have purchased a MSI P965 Neo F motherboard.
http://www.msicomputer.co.uk/Product...3735&cat_id=77
I have flashed the bios to the lastest 1.18 revision.
If you look at this board, you'll find it has 5 SATA ports.
- 1 SATAII port by JMicron JMB361.
- 4 SATAII ports by ICH8.
Questions:
1.) The machine only appears to be able to boot from the 1 jmicron sata port.
2.) within the bios any disks plugged into the board on the other 4 ports show up as "ide" disks, this could be wording or this could be some cheap bus trick

Hi, thanks for responding,
Quote
no wrong with "ide", as SATA ports on ICH8 are detected as IDE devices, (as opposed to detected as SCSI device).
could you clarify this, I think its just the "no wrong" line, what do you mean by this.
Quote
No, the machine is able to boot from any JMicron port, including PATA port.
there is only 1 jmicron sata port, so my initial comment was aimed at you can only boot from this 1 sata port - not the other 4 ich8 ports, I assume thats correct from your comment.

MSI P965 Neo video error. Bios text miscolored

Similar Messages

Maybe you are looking for