MSI PLATINIUM P45 WORKING MEMORY PC8500 OR PC6400

I HAVE MSI PLATINIUM P45 I WOULD LIKE TOO UPGRADE MY MEMORY WHICH ONE BETTER AND WORKING FINE 1-
The Kingston HyperX Dual Channel 4096MB PC8500 DDR2
2- Kingston HyperX PC6400 800MHz 4GB DDR2 Dual Channel Memory

Why are you writing in caps? It is considered screaming and not very polite.
Go for the PC2-8500 sticks. Even if you can't overclock them to DDR2-1066, they usually have better memory chips on them.
I have a pair of Kingston PC2-8500 modules than run flawlessly @DDR2-1066 on this board.

Similar Messages

MSI Platinium P45 and DDR3

Hello i have a MSI Platinium P45 Motherboard and i would like to know if 4GB DDR3 -1333 is supported
or only DDR3-1066 is.
-Sheldon

It is very important to pay close attention to the marketing name and the model number when it comes to DDR2/DDR3 support.
The MSI P45 Platinum [MS-7512] does not support DDR3 memory sticks:
--> http://eu.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1479
The MSI P45D3 Platinum [MS-7513] on the other hand does support DDR3 memory (but not DDR2).
--> http://eu.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1480
Quote
i have a MSI Platinium P45 Motherboard
In case you have the MS-7512/P45 Platinum you can forget about DDR3 support altogether as the board only has DDR2 memory slots. If you indeed have a P45D3 Platinum then you should know that (regardless of what MSI says on the product page for this board) the Intel Chipset Specifications for the P45 Chipset only mention DDR3-800 and DDR3-1066. DDR3-1333 modules are not officially supported on the P45 Chipset (according to Intel's Datasheets).

MSI Platinium P45

Hello,
I have a platinium P45 MB and in it a 9500GT 1GB grahics card. My friend lent me another 9500GT which he no longer needs. What are the steps to get the cards working in sli.
The MB came with ATI crossfire bridge will that do?

sheldondsouza, please refer also to the following post: https://forum-en.msi.com/index.php?topic=130910.0
then if you are technically minded and want to take the chance, read this post: https://forum-en.msi.com/index.php?topic=130808.0
good luck and let us know if you do it and whether you are succesful.

Re: MSI Platinium P45 + Creative X-fI

Sorry for merging my query in too. But, i thought it would be nice to ask everything here.
Ok, i am planning to go for Creative X-fI Extreme Music soundcard in few weeks. There are few doubts and things i need to clear.
I'll be installing the card with 4GB RAM on MSI P45 Platinum board. And plan to use it for driving 5.1 speaker system with Windows 7 64 bit OS.
1. Is Windows 7 64-bit driver available for this card?
2. Are there any H/W or Application specific compatibility issues?
3. And lastly, i need your comments on this card. I mean, any points i need to look for before i purchase it.
Awaiting....

Topic split.
gold_heart007, "Sorry for merging my query in too"
That's not merging, it's hijacking with a question not even related to the topic at hand.
>> Please read and comply with the Forum Rules <<
1 - You would need to go to Creative website for drivers.
2 - Should not be any.
3 - Beats me, I never used one, I had a Creative Audigy II a couple of years ago but on a different MB. Maybe someone that has or had one will see this and have something to say about it.
Edit: I'll add 1 more thing, your PSU is too weak for your system, max +12V output 22A (264W). A PSU in a system with 9800GTX should be about +12V~28A to 30A minimum.
Corsair VX450W +12V~33A or VX550W +12V~41 would be far better choices than that PSU you have.

R9 290 problem on MSI B75MA-P45

Hello there,
I have two computers here.
Comp1:
Main Board: MSI B75MA-P45
Bios Version: 1.9 (Latest)
Video Card: onboard
PSU: GigaByte 610Watt (Peak 750 Watt)
12v rail Rating of listed PSU:
CPU: Intel G860
Memory: 16GB
SSD/ HDD: 240GB SSD Samsung
CPU COOLER:
Raid Card:
Sound Card:
Any Additional hardware plugged into your system: no
OC: No
Operating System: Windows 7 64 bit
Comp2:
Main Board: MSI-H61MA-E35 (B3)
Bios Version: -
Video Card: onboard
PSU: OCZ 500W Mod-X-Stream pro
12v rail Rating of listed PSU: -
CPU: G630
Memory: 8GB
SSD/ HDD: 240 GB SSD-
CPU COOLER:
Raid Card:
Sound Card:
Any Additional hardware plugged into your system:
OC: No
Operating System: Windows 7 64 bit
The problem is that my new R9 290 doesnt work on the first comp. When pressing the power button the fan of the GPU is maxing and makes alot of noise. Connecting my monitor to the onboard GPU i see the comp is working and is booting into windows. Updating the Bios didnt work and chosing PEG instead of IGP doesnt matter.
To check if the R9 290 is working i put it in comp2. It boots normally, and no problems. I began to wonder if the PSU of comp1 is the problem.
So i Changed the PSU of comp2 to comp1 and pushed the power button. Same as before: alot of noise and not working.
Meanwhile it Boots into windows. Connecting my monitor to the onboard video I can see it boots into windows. But I dont see the R9 290 at all in the hardware device list.
My first conclusion: The XFX R9 290 isnt recognized by the B75MA-P45 Motherboard at all, even when i switch the PSU from comp2.
I need the card to work on comp 1 because that is my computer. (Comp2 I borrowed from a friend for testing).

Quote from: vondutchx on 28-December-13, 18:40:07
Litecoin mining :P, and for the games i play the setup is more then enough. If it would work...
A tip to all the Bit/Lite coin miners:
Just plug 6 AMD graphic cards into a piece of wood and you'll become a real "miner".

MSI B75MA-P45 "Reboot and Select proper Boot device"

Hey guys, I just had this PC delivered to me yesterday, pre-built after my specs. Been using their company for a decade and never had an issue (that said, they might very well have screwed up this time, but I would love some feedback).
So, when I plug in the PC and boot it it get stuck at "Reboot and Select proper Boot device" (and in the bottom right it blink between A2/B4 before it gets to the reboot prompt).
What I have done to try to fix this:
1) Go into BIOS and swap around the boot order. No luck with that, and I cannot find the SSD HD on the list either.
2) Confirmed it was set on AHCI mode.
3) Booted with the MSI Motherboard CD to get to Winki. In the Winki file manager I do see the SSD HD with Windows installed! But the BIOS cannot find it.
The specs:
Board: MSI B75MA-P45
Bios: E7798IMS V1.5
VGA: ASUS Geforce GTX660Ti
PSU: Corsair CX 500
Intel Core i7-3770
Corsair Cooling Hydro H55
RAM: Corsair XMS3 Vengeance CL9
Samsung SSD 840 Series 120 GB
Seagate Barracuda 2TB
Win 8
So I'm left a bit dumbstruck here. It seems quite clear the BIOS cannot find the SSD for some reason, but I'm not sure how to sort this?
I mean: I do see Windows in the Winki file manager, so the HD is clearly there and readable. But on the other hand it cannot find it in the BIOS so I can't choose it as a boot drive.
Any suggestions on what might cause this and how I could solve it?
Thank you.

Wow, that was easier than I thought.. after hours of browsing internet, trying all kinds of BIOS settings, eventually I just opened the case and plugged out the SATA cables and plugged them back in. Boom, it works. Didn't expect it to be that easy since the Winki still could see the HD.
Seems BIOS is more sensitive than the Winki. But there you go, problem solved.

MSI B75MA-P45 suddenly no post after 2 weeks new build

Hi all..an annoying problem after i built this new 2-3 weeks ago & running fine.
Suddenly pc doesnt post/boot just black screen on monitor (no signal received) No beep from post speaker & No lights on keyboard (although number/caps lights do flash once on & off).
MSI B75MA-P45 (MS 7798 Ver 1.1) ser no 601-7798-030B1210112914
Intel i3 3220 LGA1155 3.3GHz 55w BX80637133220
2 sticks Crucial Ballistix BLT4G3D1608DT1TX0.16FKR 1600MHz 8-8-8-24 (in slots 2 & 4)
Corsair 430W CX430M CX Series Modular PSU 80 Plus Bronze
Asus nVidia GT640 2GBD3 PCIE GPU
I built this for my brother so i havent used it after initial build but he said it worked fine until went to start yesterday & this problem appeared. I installed/updated all drivers from shipped mobo disc & gpu driver is up to date.Microsoft Security Essentials was installed from new also.
I have tried installing 1 stick ram & tried it in all 4 slots (both sticks).
I have reset cmos
I have tried new monitor cable (dvi)
I have removed & reset 24 pin & 4 pin mobo power cables
I removed/reseated gpu card
i have tried new sata cable from hdd (WD Blue 500GB HDD)
Anything you can point me towards please?
Thank You

Quote from: Bernhard on 03-April-13, 17:35:22
Try another known working PSU.
Just got around to this pc again this morning & have upgraded the psu to Corsair 600w & hey hey boots to windows fine.
Thank you very much for your help
Regards

MSI B75MA-P45 and Red Caviar 3 TB

Hello! I recently purchased the MSI B75MA-P45 motherboard and the 3TB Red Caviar HDD. I had sent my computer to the shop for the installation and when I collected it, the techies there said something about how the Red Caviar is "too big" and that there were partition issues. They also mentioned the need to download some sort of an "unlocking" software for the motherboard to solve the issue.
But the HDD and the partitions seem to work fine. They are my D: and G: drives, at 1.99TB and 931 GB respectively. And I do believe these parameters are normal after formatting. Were they just mistaken about something? I just can't see what the problem is.
I would appreciate any input on this matter. Thank you!

Wow, that was easier than I thought.. after hours of browsing internet, trying all kinds of BIOS settings, eventually I just opened the case and plugged out the SATA cables and plugged them back in. Boom, it works. Didn't expect it to be that easy since the Winki still could see the HD.
Seems BIOS is more sensitive than the Winki. But there you go, problem solved.

Need help regarding MSI 785GM-P45

Hi
New to this forum so I will try to give as much info as possible. If you have any suggestions please give as much details as possible since I am new to building my own HTPC
Motherboard: MSI 785GM-P45
CPU: AMD Athlon II X4 640 3.0 GHz
RAM: AVeir 2GB DDR3-1333
HD: EIDE 80GB WD
I installed the cpu and heat sink as well as the RAM in DIMM1 then I attached the power to the mother board. Also attached then box power switch and HDD connections to the motherboard. When I press the power switch on the box I can see the cpu fan turning and box fan turning as well as hear HD spinning (at this point I dont have IDE cable connected to HD). then I attached the display to the mother board and the display does not show anything (displays standby light is still yellow). I power off the system and then attach IDE cable to the HD and then power on the system and this time everything works like before but one thing is different. I cannot hear the HD spinning or powered up. Not sure what is happening. Any suggestion would be welcome
Thanks

You get no display on the monitor?
A bit off: How can they name an AMD 'board P45?! http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=171&prod_no=1990

Re: MSI 785GM-E51 and memory modules problems -l- Split

I am using AMD PHENOM II 1055 125w CPU on MSI 785GM-E51. Memory Corsair XMS3 DDR3-1600 x4
I can put memory in slot 1 and 3 it will boot fine.
If I install DDR3 in slot 1 and 2 the system will not boot. If I full populate all the memory slots it will not boot
In both scenario's after the system does not boot and go back to just using slots 1 and 3 the system boot with CMOS checksum error and need to go in to BIOS setup. All the changes need to be made again, saved and exit and it reboots fine.
I have already attempted to setup the memory speed to 1333 and 1066 with no luck. Any ideas?
785GM-E51/BIOS 2A0, Phenom II T1055 @ 2.8 GHz, 125W Stock AMD Heat sink&Fan
Corsair 2x2GB CMX4GX3M2A1600C9, 9,9,9,24, 1T, 1.47V, 1600 MHz --------- 2 kits
ESXi 4.1
Antec 650 Truepower
ATI x600 PCI-e
Adaptec AAR-2610A with 5 WD Caviar RE WD2500SD-01KCB0 250GB RAID-5 Configuration
NEC ND-2501A DVD-Burner

Topic split, don't hi-jack other peoples topics. >> Please read and comply with the Forum Rules <<
Provide more information on your system, read this: >> Posting Guide <<
See my signature for example of information to provide.

MSI installer not working MSI 5.0 Windows 7

Hello I am trying to get MSI installer to work and when I go to install anything that has the Windows Installer Package it opens Notepad in a scrambled message. I have tried numerous avenues to no avail (regedit,copy paste regedit, troubleshooters, sfc/scannow,
command prompt etc.) I tried to choose the file association of MSIexec in System32 and it just opens this
I have tried what is suggested in this forum
https://social.technet.microsoft.com/Forums/windows/en-US/f699e632-54ba-443b-85df-269a7fd6cf1a/windows-installer-not-working?forum=w7itprogeneral and regedit says:
I have tried this http://support.microsoft.com/kb/2438651#reso1 and didn't work
I have tried changing C :\Windows\System32\msiexec.exe /V in regedit and that didn't work
I have searched event viewer and all that's in there is a warning and information of successful installs and uninstalls.
I have tried %windir%\system32\msi.dll version in Command prompt and it says that the system cannot execute the specified program
I am thinking it is just a matter of finding the correct file association that the windows installer can use to install that program but I am unable to find that!
I did a system restore but the only good restore was from earlier today and it still just opens notepad. before I did the restore I went into services and the computer couldn't find the file (windows installer) so I did a restore and now it at least sees
the file and I can start the service.
Can I please get some help fixing this? would uninstalling MSI and re-installing it work? I have been searching forum after forum and nothing has yet worked.
I did a clean install of windows a couple of weeks ago
Microsoft answers gives me thee worst answers a person could come up with.
for a complete list of what my computer is check my bio

Hi ingenuities,
Try importing these reg file under Safe mode.
If you really need this work, I am supposing the only way is to try importing them manually, if any value key is using by process, use process monitor to filter out these processes and shut them down.I monitored values under MSI.package seems like no
value was using by system.
I exported msi.package and patch to text, it is from a clean Windows 7 intallation。
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Msi.Package]
@="Windows Installer Package"
"EditFlags"=hex:00,00,10,00
"FriendlyTypeName"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,\
00,6f,00,6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,\
32,00,5c,00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,\
00,2d,00,33,00,34,00,00,00
"InfoTip"="prop:System.ItemType;System.Author;System.Title;System.Subject;System.Comment;System.DateModified;System.Size"
"FullDetails"="prop:System.PropGroup.Description;System.Title;System.Subject;System.Category;System.Keywords;System.Comment;System.PropGroup.Origin;System.Author;System.Document.RevisionNumber;System.Document.DateCreated;System.ApplicationName;System.PropGroup.FileSystem;System.ItemNameDisplay;System.ItemType;System.ItemFolderPathDisplay;System.DateCreated;System.DateModified;System.Size;System.FileAttributes;System.OfflineAvailability;System.OfflineStatus;System.SharedWith;System.FileOwner;System.ComputerName"
[HKEY_CLASSES_ROOT\Msi.Package\DefaultIcon]
@="C:\\Windows\\system32\\msiexec.exe,0"
[HKEY_CLASSES_ROOT\Msi.Package\shell]
@="Open,Repair,Uninstall"
[HKEY_CLASSES_ROOT\Msi.Package\shell\Open]
@="&Install"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,36,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Open\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Repair]
@="Re&pair"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,37,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Repair\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,66,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\runasuser]
@="@shell32.dll,-50944"
"Extended"=""
"SuppressionPolicyEx"="{F211AA05-D4DF-4370-A2A0-9F19C09756A7}"
[HKEY_CLASSES_ROOT\Msi.Package\shell\runasuser\command]
"DelegateExecute"="{ea72d00e-4960-42fa-ba92-7792a7944c1d}"
[HKEY_CLASSES_ROOT\Msi.Package\shell\Uninstall]
@="&Uninstall"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,38,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Uninstall\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,78,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shellex]
[HKEY_CLASSES_ROOT\Msi.Package\shellex\ContextMenuHandlers]
@="Compatibility"
[HKEY_CLASSES_ROOT\Msi.Package\shellex\ContextMenuHandlers\Compatibility]
@="{1d27f844-3a1f-4410-85ac-14651078412d}"
[HKEY_CLASSES_ROOT\Msi.Package\shellex\PropertySheetHandlers]
[HKEY_CLASSES_ROOT\Msi.Package\shellex\PropertySheetHandlers\ShimLayer Property Page]
@="{513D916F-2A8E-4F51-AEAB-0CBC76FB1AF8}"
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Msi.Patch]
@="Windows Installer Patch"
"EditFlags"=hex:00,00,10,00
"FriendlyTypeName"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,\
00,6f,00,6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,\
32,00,5c,00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,\
00,2d,00,33,00,35,00,00,00
"InfoTip"="prop:System.ItemType;System.Author;System.Title;System.Subject;System.Comment;System.DateModified;System.Size"
"FullDetails"="prop:System.PropGroup.Description;System.Title;System.Subject;System.Category;System.Keywords;System.Comment;System.PropGroup.Origin;System.Author;System.Document.RevisionNumber;System.Document.DateCreated;System.ApplicationName;System.PropGroup.FileSystem;System.ItemNameDisplay;System.ItemType;System.ItemFolderPathDisplay;System.DateCreated;System.DateModified;System.Size;System.FileAttributes;System.OfflineAvailability;System.OfflineStatus;System.SharedWith;System.FileOwner;System.ComputerName"
[HKEY_CLASSES_ROOT\Msi.Patch\DefaultIcon]
@="C:\\Windows\\system32\\msiexec.exe,0"
[HKEY_CLASSES_ROOT\Msi.Patch\shell]
@="Open"
[HKEY_CLASSES_ROOT\Msi.Patch\shell\Open]
@="&Apply Patch"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,39,00,00,00
[HKEY_CLASSES_ROOT\Msi.Patch\shell\Open\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,70,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Regards
D. Wu

Business Rule Error: Fact not found in the rule engine working memory, rule

I am trying to create a simple decision table with an input(ValidateInput) and a output(ValidateOutput). The input and output schemas have unbounded and nested elements(Parent-child relationship). When I create a condition(specific condition on input) and in the action I am asserting the output object. But when I run using EM it throws the following exception. It would be helpful if somebody could tell me what could be the problem. Please note when I set the output as ValidateInput object then it runs fine. Also it executes fine with ValidateOutput if it doesn't have unbounded(List) element inside it.
Error Message: {http://xmlns.oracle.com/OracleRules10/OracleRules10_DecisionService_1}operationErroredFault
Fault ID rules:211
Fault Time Jun 18, 2011 10:45:13 AM
Non Recoverable Business Fault :
Fact not found in the rule engine working memory, rule session execution failed. The rule session 270013 failed because an instance of the fact com.example.customer.ValidateResponse could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 270013
Edited by: reachsky on 18 Jun, 2011 9:57 AM

It's working now..I had to use Global variable to declare child element of the output variable and use the same during action.

Fact not found in the rule engine working memory,rule session executionfail

Hi
I'm getting this error on my BRE, the instance Id shows 'faulted' but other consectuctive web services are 'completed' successfully.
please advise how to fix it.
Error Message: {http://xmlns.oracle.com/zz_ValidationRules/zz_ValidationRules_DecisionService_1}operationErroredFault
Fault ID rules:417
Fault Time Aug 25, 2011 4:59:39 PM
Non Recoverable Business Fault :
Fact not found in the rule engine working memory, rule session execution failed. The rule session 130287 failed because an instance of the fact Response could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 130287
thanks,
Umesh
Edited by: user13664410 on Aug 25, 2011 2:19 PM

When i had this issue i overcame it by opening the Rule Editor->Deleting all existing facts that are imported->Close JDeveloper -> Delete the contents of .rulesdesigner directory in your workspace -> Restart JDeveloper -> Reopen Rule designer and re import all facts.
Also make sure that all the schemas that are used for Facts are valid ones.

Fact Not Found in Rule engine working memory

I am using 11g, I have built a Business Rule, using RL facts, XML facts, Bucketsets and multiple Rulesets which internally has decision table and If-then rules. After deploying the same, Business rules runs successfully for some conditions and faults for some condition. The fault error for those failed conditions displays the following error:
Fact not found in the rule engine working memory, rule session execution failed. The rule session bpel:<somenumber> failed because an instance of the fact <factname> could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. Contact oracle support if error is not fixable.
It is wierd becuase if it is a fault with respect to working memory then I would imagine it has to fail for all the conditions as all the conditions assert the same Object. Has anyone faced the same issue or am I doing something wrong here.
Venkat

Ervan
I deleted the RL facts that I had created and asserted the result to the Business Object, this seems to have taken care of this issue, but I am still not sure what was wrong in the way I build the rules using RL.Hope this helps.
Venkat

"Installer" Process taking 2 GB working-memory

Hello, my Problem is the following:
- My iMac gets so slow, that nothing works anymore - I can barely restart, that takes minimum 1 Minute
- I found out, that a process named "Installer" is appearing regular out of nowhere and is taking almost 2GB working memory, then I have only about 10MB left, which is ofc too less (I got 4GB working memory in total)
-When I kill the process, everything runs normal again, and my working memory is back.
Has somebody an idea, where that process may come from, and how i can stop it?
I don't want to kill the process every day again and again, because it appears about every 2 hours.
I already went to Apple Menu > System Preferences > Users & Groups > Current User > Login Items and took all hook out - It's still not fixed.
I hope for help,
Greetings CFB

Sry that I reply late, but somehow I didn't get emails, and today ( ! ) I got ALL emails for ALL replys at once...
Here is the EtreCheck-Result:
Hardware Information:
    iMac (21.5-inch, Mid 2011)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4 cores
    4 GB RAM
Video Information:
    AMD Radeon HD 6750M - VRAM: 512 MB
System Software:
    Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:6:11
Disk Information:
    ST3500418AS disk0 : (465,76 GB)
        (null) (disk0s1) <not mounted>: 200 MB
        Macintosh HD (disk0s2) / [Startup]: 418,29 GB (219,13 GB free)
        BOOTCAMP (disk0s3) /Volumes/BOOTCAMP: 47,28 GB (16,88 GB free)
    HL-DT-STDVDRW GA32N
USB Information:
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information:
    Apple, Inc. iMac
Kernel Extensions:
    [not loaded]    arcana.PRAM (6.1) Support
    [not loaded]    com.Immersion.driver.ImmersionForceFeedback (1.0.7) Support
    [not loaded]    com.acard.driver.ACard6280ATA (1.0.5) Support
    [not loaded]    com.acard.driver.ACard62xxM (2.0.6) Support
    [not loaded]    com.acard.driver.ACard67162 (2.0.3) Support
    [not loaded]    com.acard.driver.ACard671xSCSI (2.0.1) Support
    [not loaded]    com.acard.driver.ACard6885M (2.0.6) Support
    [not loaded]    com.acard.driver.ACard68xxM (2.0.5) Support
    [kext loaded]    com.eltima.ElmediaPlayer.kext (1.0 - SDK 10.4) Support
    [not loaded]    com.logitech.driver.LogitechForceFeedback (1.0.3) Support
    [not loaded]    com.vara.driver.VaraAudio (1.0.2) Support
Startup Items:
    ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Problem System Launch Daemons:
    [not loaded]    org.samba.winbindd.plist Support
Problem System Launch Agents:
    [failed]    com.apple.Kerberos.renew.plist
Launch Daemons:
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.SwitchBoard.plist Support
    [running]    com.eltima.ElmediaPlayer.daemon.plist Support
Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    net.culater.SIMBL.Agent.plist Support
User Launch Agents:
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.genieo.completer.download.plist Support
    [loaded]    com.genieo.completer.update.plist Support
User Login Items:
    None
Internet Plug-ins:
    Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
    FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
    JavaAppletPlugin: Version: 13.9.2 - SDK 10.6 Check version
    Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.6.6
    Silverlight: Version: 4.0.51204.0 Support
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
    Flash Player Support
    Flip4Mac WMV Support
    SizzlingKeys Support
    ArcanaStartupSound Support
Top Processes by CPU:
        99%    Installer
         3%    firefox
         1%    WindowServer
         1%    fontd
         0%    activitymonitord
Top Processes by Memory:
    1.79 GB    Installer
    311 MB    firefox
    82 MB    Mail
    66 MB    WindowServer
    53 MB    Finder
Virtual Memory Information:
    650 MB    Free RAM
    2.65 GB    Active RAM
    44 MB    Inactive RAM
    686 MB    Wired RAM
    205 MB    Page-ins
    1.34 GB    Page-outs
I will check out the Genieo now...
Thanks for replys till now.

MSI PLATINIUM P45 WORKING MEMORY PC8500 OR PC6400

Similar Messages

Maybe you are looking for