Msi primo 73 16gb capacity turns 8gb only after firmware update

can anyone help me to return the 16gb capacity of my msi primo 73, after updated my firmware when I checked it has only 8gb. I downloaded the firmware from msi site with this N71J_V1.3_4.2_0726_V2.zip, version 1.3, released: 2013-09-17, file sized: 388.07 MB. I dont know if there is a bug in this update...... hope you can help me on what to do...
THANKS.....

Quote from: flobelix on 14-November-13, 02:23:20
>>How to contact MSI.<<
thanks flobelix, let's wait and see whats MSI can do to respon our reports.
for anyone has wanted to root this rom, here you go, it's works like charms.
http://forum.xda-developers.com/showthread.php?t=2470487
just follow the instructions.

Similar Messages

  • Tactic 3d Rage not turning on anymore after firmware update, PLEASE HELP

    I tried to update my firmware and did not read the instructions carefully, I never unplugged the headset when I updated the firmware of the usb transmitter. so after that my headset was flashing blue, and it was not working, I let it drain out. but now it wont open again, I read on some forum that I could plug the headset in another power source to get it to open again, so its plugged in my iPhone 5 plug right now and still not opening. please help

    Originally Posted by Yann31
    I tried to update my firmware and did not read the instructions carefully, I never unplugged the headset when I updated the firmware of the usb transmitter. so after that my headset was flashing blue, and it was not working, I let it drain out. but now it wont open again, I read on some forum that I could plug the headset in another power source to get it to open again, so its plugged in my iPhone 5 plug right now and still not opening. please help
    Hi Yann31,
    Just a possible solution I'd like to put out there..
    Maybe plugging the headset to the other power source for a longer period of time (15-30 min) might get it to work?
    Sometimes trying to charge drained headsets and turning it on immediately does not work.
    Or if you already did this, do you have another power source you can try troubleshooting with?
    Cheers!
    Philip-CL

  • HT201210 When ever i restore my phone it tells me an unknown error occured meanwhile my phone cant also be turn on again after i updated my software

    When ever i restore my phone it tells me an unknown error occured meanwhile my phone cant also be turn on again after i updated my software

    If no change after restoring your iPhone with iTunes as a new iPhone or not from the iPhone's backup, your iPhone has a problem. Call AppleCare or make an appointment at an Apple store if available.

  • Please send email to Yvonne.  I have a password only Ohrid email only after the update

    Please send email to Yvonne.  I have a password only Ohrid email only after the update
    <Personal Information Edited by Host>

    I am putting in my correct birthday and the password that I am sure is right and it is telling me to check my network connection even though my connection is working fine. I don't know what else to do!

  • New Zen 8GB crashed during firmware update; now I can't get it to reboot or connect to a compu

    I went and exchanged my "problematic white screen" ZEN 8GB for a new one this evening. When I came home, I attached the new unit to my computer and started to perform the required firmware upgrades. The upgrades downloaded fine, but after the installation started, they seemed to freeze. I waited for an hour before I did anything, but finally had to assume that the update had malfunctioned and would never finish on its own. At that point I clicked "cancel" in the window monitoring the upgrade installation, and thought I could just start the process anew. Unfortunately, my computer no longer recognizes the ZEN when it's plugged into a USB port.
    I rebooted my computer, just in case that was the problem, but it still can't find the ZEN when searching for devices to AutoUpdate. As for the Zen itself, I can turn it on and off, but the screen remains black (i.e., no info on screen). If I reset it, the screen flashes the word "Creative" only. If I try to do a Recovery, I can't get any text to appear on the screen. I can't even reformat the ZEN via my computer because they're no longer speaking. I assume that the interrupted firmware installation caused this problem, and that the ZEN just doesn't have enough of an operating system installed to work properly. Is there any fix for this that I can tackle myself Or, is it back to the store to return this one, too I have noticed a lot of white screen flashings as I've been working with the new ZEN, so perhaps this just wasn't meant to be. Any words of advice are certainly appreciated, however.

    Same happened to me and I only had the thing a few hours. I may leave it connected overnight to see if the battery needs charging but if nothing happens it's going back. I've tried plenty of suggestions. The Creative screen flashes on when I plug it in but then just sits there. Reseting does nothing and how can you do anything to it if it's not recognised by the PC. Vista did see it before the update attempt. Wondered whether to throw XP back on.
    Do I have to resort to the new ipod Nano
    OK I've done it. Somewhere on this forum it said to disconnect the Zen from the PC.
    Now at the same time, press and hold the play/pause button, put a pin into the reset button and hold down the on/off switch (yes all 3 in that order at the same time). Recovery mode came on and I tried to uninstall the firmware update from previously - it didn't do it but I updated the latest firmware again anyway and this time it worked. I guess the last attempt didn't take.
    Message Edited by nimble on 2-06-200709:34 PM

  • Changes commited to the database only after I update OracledataAdapter twice

    Hi. I am using oracledataadapter to manage the data which is eventually displayed in winform datagridview (Visual Studio 2012)
    everything works fine , but I have to click "Save" buttin twice to see the changes in the database (Oracle express 11g)
    Can you please advice....
    Here is my code
    it is very simple
    1. Obtain connection
    2. Create dataadapter
    3. Create commands
    4. Fill the datatable and dataset
    public partial class Concordance : Form
            OracleDataAdapter setupAdapter;
            DataSet projDataset;
            OracleConnection conn;
            //binding sources
            BindingSource setupBindingSource = new BindingSource();
            DataTable setupTable;
            public Concordance()
                InitializeComponent();
                //load tables
                loadSetup();
            //setup table
            private void loadSetup()
                string oradb = ConfigurationManager.ConnectionStrings["OpenU"].ConnectionString;
                conn = new OracleConnection(oradb);
                try
                   // using (conn = new OracleConnection(oradb))
                    setupAdapter = new OracleDataAdapter("select * from ou_setup", conn);
                        OracleCommandBuilder builder = new OracleCommandBuilder(setupAdapter);
                        projDataset = new DataSet("Concordia");
                        setupTable = new DataTable("Setup");
                        projDataset.Tables.Add(setupTable);
                        setupAdapter.Fill(projDataset,"Setup");
                        //bind the gataGridView
                        this.setupGrid.DataSource = projDataset.Tables["Setup"];
                        this.setupBindingSource.DataSource = projDataset.Tables["Setup"];
                        this.setupNavigator.BindingSource = this.setupBindingSource;
                catch (Exception ex)
                    string error = ex.Message;
                    MessageBox.Show(error);
            private void saveSetupBtn_Click(object sender, EventArgs e)
               // only after sabe button clicked for the second time the changes are commited into the database
                this.setupAdapter.Update(projDataset.Tables["Setup"]);
                MessageBox.Show("saved");

    How are you reading in the object initially? The problem is likely that you are modifying an object from the session cache. When you then read in the object from the uow, it uses the object in the session cache as the back up. So there will not appear to be any changes to persist to the database.
    You will need to make a copy of the object for modification, or use the copy from the unitofwork to make the changes instead of working directly on the object in the session. Disabling the cache means there is no copy in the session cache to use as a back up, so the uow read has to build an object from the database.
    Best Regards,
    Chris

  • How to turn off alarm after system update?

    I get alarm when restarting my T400 after system update. Can anyone give me suggestions to turn off this alarm?
    Thanks,

    I have no display > powercontrol in openbox, gnome or fluxbox, What are you talking about?

  • A1000l-f will not turn on after firmware update

    i bought my tablet last night  as a black friday sale item from office depot and it was working fine for about 2 hours. it then said i needed to update my firmware so i did. after a minute or two a screen popped up stating it needed to shutdown or something and did i want to do this now or in 30/60/90 minutes. i picked for it to do it now. i went for a walk and ever since then the dang thing will not turn on, it will do nothing. no vibrations, no noises, nothing. the back sticker says it is an a1000L-F, but it is an 8gb so i am assuming it is not an actual F? any help? the battery was at 68% and plugged in/charging when i updated the firmware. i also left it plugged in and charging all night (10 hours) and still does nothing.
    Solved!
    Go to Solution.

    well, before taking it back to the store i tried plugging it into my iphone base charger/plug. turned right on! not sure why it died so fast when it was at "68%" while plugged in charging...but it did. i charged it to 100% and it has worked perfectly fine ever since. maybe the charger plug that comes with this thing sucks, i dont know....but it works now just fine.

  • I cannot turn on wifi after iOS update on my iphone 4s

    I am experiencing the problem for two days. I followed all suggested steps and even restored my phone several times, didn't work out! The problems started as soon as I upgraded iOS.
    I also tried to get help from live chat support and apparently I need to get it to service. However, since I purchesed my phone from US and now living in UK, I "should" send my phone to US to get the service which is basically impossible for me now.
    I am not the only one who has this problem as seen from discussions and this is obviously an apple issue. I need urgent help!! There is no way for me to send my phone to US or go there either. And asking me such a thing by an international company like Apple is totally unacceptable!

    What Apple says about this issue is that it happens "in rare instances"
    http://support.apple.com/kb/TS1559
    What the heck Apple...can't you read a whole bunch of "Greyed Out" wifi problems posted in the communities and still you claim it happens in rare instances? This issue makes iPhone a dumb phone and not a smart phone anymore. If this issues is isolated, then not a hundred people should be experiencing this kind of problem. But no, I see lots of people with the same issue. And what does your Apple Care centers do, especially here in the Philippines? They say they cannot help those who beleived in Apple products and bought one. What these people can only say is that "sorry". The saddest part here is that, the problem in my iPhone 4S happened exactly a week after my warranty expired. Isn't that fun? This means iPhone hardwares only have a year of lifespan. #@$#%#@#$ after paying a huge amount of money, this is what Apple will give back to its customers. A bullcrap of aftersales experience.
    I really hope Apple will look into this. After my experience, I am presonally campaigning my friends not to try Apple. Definitely Apple products are not money-worth.

  • I can no longer turn off programs after ios7 update

    I just upgraded my iPhone 5 to iOS 7 and can  I longer turn off apps to conserve battery. (Double-tap home, touch &amp; hold on the app to close and then touch the   X to close it). I just end up in the app I want to close. Has anyone else figured out how to do this?

    Double tap home button>tiles pop up with all apps> slide them up to close

  • IPod nano won't turn on anymore after frozen update process

    Hey, my friend asked me to update his iPod nano 1G Black (1GB) to new firmware. OK, did that.
    After the uploading of the new firmware to the iPod, it shows that Black Apple Screen, and a White Loading Bar beneath that Apple logo. But halfaway it froze, so I need to reset it. So the nano resetted, it went out, but NEVER went on anymore!
    I've tried all things to solve it, draining battery, resetting, holdswitching, and many other things that I found on forums here. I aint stupid, so "Try switching the HoldSwitch on and off, then try resetting the iPod" wont solve my problem. It stays dead...
    Also when I connect it to my PC, it won't show up, no sound of connecting hardware, screen stays black, won't charge, what the **** has happened?
    The only thing the iPod can do now is laying on the desk, and when I try to reset it, after six secs I hear a soft click, but it stays dead.
    Plz, does anyone knows where I can get support, that nano is around a year old... I can't believe that the battery is broken within a year...
    And now my friend thinks that I broke his nano, but all you guys here are having the same problem...
    Is there any emailadress where I can contact Apple, instead of placing it here?
    Man, I hope somebody can help me...
    Nillus and the dead nano

    Yup, I think that's the only way how to solve it.
    The nano is still under warranty, my friend bought it in April 2006.
    And I know an Apple Store 15 mins from my home
    Thnx for your help everyone!
    @Sakura-chan!
    I think that's the best you can do
    Take it back to an Apple Store.

  • Can't turn wifi on after new update.  FIX IT APPLE!!!

    I love Apple products but starting to get really aggrevated.  Can't even select wifi to turn it on, tried everything suggested.  Guess I will just have to wait for Apple to release a fix.  Thinking the Samsung Galaxy 3 is looking very nice.

    This is a user to user forum. Apple is not here.
    If you want to tell them your problem use www.apple.com/feedback instead.
    Allan

  • Stacks issue after firmware update 1.2, won't fan anymore only grid.

    This issue was resolved when I updated to the 10.5.2 Leopard OS but now that I've updated the firmware with the most recent update yesterday the stacks function in the dock went back to just being able to show the grid format and when I choose the list format it comes up in a standard list (menu) view not the nice new fan view.
    Has anyone else had this issue yet? Has anyone been able to fix it? I can see from the install log that there were errors and it looks like they were specifically with the dock/stacks portion but I'm not code savvy enough to know how to fix them.
    Any help or suggestions would be greatly appreciated.

    Well, at the risk of insulting your level of expertise - is your Dock on the side instead of the bottom? There's no fan available with side-docked Docks, either in function or the popup menu.
    If that's not the case, try trashing the Dock's plist and see if that makes it behave.
    Please keep in mind we see many, many beginners or otherwise naive users asking questions which have simple answers, and no insult is intended when a suggestion is made that you've already tried; it's hard to assess a writer's knowledge level. When your original post said "and when I choose the list format it comes up in a standard list (menu) view not the nice new fan view" it made it hard to determine your level for 2 reasons: You referred to the "new fan view" which is not new in 10.5.2, the upgrade you said you just installed, and if you "chose the list format" why would you expect it to show you a fan view? That's probably why Bruce told you to select "fan view". It was probably just a less-than-perfect sentence on your part, but you might be able to see, in retrospect, that it sounded a little newbie-ish.
    Bruce tried to help you and we can only hope that your reaction does not make him hesitate to help someone else lest he get snapped at again!

  • My Mac won't turn back on after I updated the software

    My Mac won't turn on

    Pull your hard drives.
    Put in your OEM DVD
    Hold down the letter d on startup and run Apple Hardware Test
    Put in your latest OS X DVD and hold c
    Does it do both.
    Oh, and Reset SMC.
    http://www.apple.com/support/macpro
    And make sure you have backups, bootable backups, and just WHAT version OS X?? what update(s)?
    .... we are not going to know.... Lion? 10.6.8?

  • I updated to firefox 7, but only after i updated did it tell me that it isn;t compatible with mac os 10.4.11.... how do i get an older version back?

    when i was on the website, it just said there was a newer version, so i updated, now firefox won't work.. how do i get an older version?

    You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
    *ftp://ftp.mozilla.org/pub/firefox/releases/latest-3.6/

Maybe you are looking for