MSI Pro-E X58 help plz plz plz

So I have six GB of ddr3 memory installed on my core I7 930.
I'd just gotten off the phone with MSI they told me it was a memory problem as i had 1333 ram, it was meant to be oc'd and i need to do that if i want it to work rite.
the whole reason i called msi in the first place was because my computer will randomly give me a black screen where i have to force a hard reset. or a gray screen with vertical lines going down i.
so my question to you the MSI community is:
where can i learn to OC my mem on a x58 pro-e motherboard?
also what do you think is the problem ?
p.s its not the video card i tested it on another pc
also it is not an OS problem Ive tried multiple OS , EX Ubuntu , windows vista , windows 7 and even xp
PC SPEC"S
Intel core I7 930
6GB 1333 kingston memory
ATI HD 5750 1GB Video card
800wat psu
2x 1TB HDD
2x 24in lg displays
Thank you
Mathew V Holzschuh

Quote from: Mike on 28-July-10, 23:06:13
I'd be more inclined to set the CR set to 2T(2N) with Intel.
Very true of the P55's & some other Intel chipsets, but not my experience with the X58. Every rig I've built for myself or family & friends performed perfectly setting CR 1N(T). This was using Corsair brand exclusively.

Similar Messages

How to adjust VCORE in MSI Pro-E X58?

Hey guys; I've built my first rig and I'm interested in overclocking the i7 I've bought. I've already read a lot on OC'ing and the potential hazards that come with it. In any case, I own the MSI Pro-E X58 and was looking to OC. I've steadily increased the BCLK using the default voltages, but when I hit 3.4 GHz (with a BCLK of 170), Windows crashed after about an hour of P95. I opened the cell menu in the BIOS looking to bump the voltage up a notch, but am a bit confused as to how to do this. Under the cell menu, I noticed the "CPU Vcore" at 1.328 V; I find this odd because I thought the default voltage setting for the Core i7 was 1.2? Also, I'm somewhat unsure as to what the "CPU Voltage" setting does; is this linked wit the "CPU Vcore" setting? My best guess so far is I can change the CPU Voltage to +/- from the CPU Vcore but I'm not entirely positive. Any help would be great.

Quote
I noticed the "CPU Vcore" at 1.328 V; I find this odd because I thought the default voltage setting for the Core i7 was 1.2?
QPI is 1.20V default on the Pro-E. Your CPU Vcore of 1.328V's will need to be bumped a bit to remain stable. CPU V./Vcore, basically the same thing. Just bump up the CPU V. a step at a time until the system remains stable. Be sure Spread Spectrum in bios Cell Menu is disabled. Remember to keep an eye on the RAM speed as you increase bclk. That can be another source for instability.

MSI Pro E X58 fan headers amp output

Anyone know what the fan header amp specs are on the Pro E X58?

Would expect the Pro-E to be the same; https://forum-en.msi.com/index.php?topic=144370.msg1074883;topicseen#msg1074883

My Macbook pro,s Airdrop isn't functional plz help me to use it

Hi everybody.
My Macbook pro,s Airdrop isn't functional plz help me to use it.

Mac Basics: AirDrop helps you share items with others nearby

Can i help u? i had bought camfrog pro app by itunes...i see that app is upgrade now. but i can not upgrade that app...i can see this message "can not open by This id" i don't know why can not upgrade camfrog pro by my korea id? plz answer me

can i help u? i had bought camfrog pro app by itunes...i see that app is upgrade now. but i can not upgrade that app...i can see this message "can not open by This id" i don't know why can not upgrade camfrog pro by my korea id? plz answer me

To Update the App you have to Use the Same Apple ID it was Purchased with...

Finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5

finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5

In Finder, Click View, then Show Sidebar - or ALT+CMD+S

I selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

i selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

FIFA 14 ULTIMATE TEAM HELP PLZ HELP ME ASKED THIS QUESTION TOO MANY TIMES BUT NO HELP ME SO PLZ HELP ME PLZ

HI
i like playing fifa and i wanted to start a fifa 14 ultimate team but th problem is that i know some things about fifa but not too much and i was wondering if you guys/girls can helpl me out
you see the problem is that i dont know how to start off fifa 14 ultimate team lke what should i do when i start off and what should i should i do after
i tried fifa ultimate team before and was no good because i always had no money left and my players were bronze and had no more contracts so can you guys/girls help m out plz
plz help me out and reply back to me by this post plz need your help a lot plz help me plz
thanks

It's best to Google for answers. Here's one.
http://www.fifauteam.com/fifa-14-mobile-ios-android/
 Cheers, Tom

My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...

My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...except restore ...

Anyone? . . . :S

Plz plz anser plz ihave problem with my ipad ithink it has been hacked plz plz plz fix my ipad i`m vere poor i`m form iraq plz anser plz ok

plz plz anser plz ihave problem with my ipad ithink it has been hacked plz plz plz fix my ipad i`m vere poor i`m form iraq plz anser plz ok
plz
my serial code for ipad is (DY*****VD2)
plz fix my ipad
<Edited by Host>

Unless your iPad has been jailbroken, it can't be "hacked", and there are no known viruses or malware.
 Cheers, Tom

Are these temps ok? (Core i7) (MSI Pro-E)

Hello folks, before I started doing some light OC, I wanted to make sure that my system was stable at stock settings, without any after market cooling devices.
My h/w specification goes like this:
CPU - Core i7 920 D0 Stepping 2.67 GHz
Motherboard - MSI Pro-E
RAM- Corsair 6 Gb kit 1333 MHz
Video card- Nvidia 9500 GT 1 Gb
Hard drives- WD 500 Gb X 2
Operating system- Ubuntu 9.10 64 bit
PSU- Corsair VX450W
I ran Mprime (the linux port of Prime95) for an hour without any issues. The temperatures were as follows:
Idle: CPU: 25-26
IOH: 64
Load: CPU: 84
IOH: 77
I know that IOH temps are high at idle, but am getting an Antec Spot Cool fan to fix that. (thanks to the informative discussions on the forums)
However what I want to know is that at full load, isn't the CPU temp too high ? My system didn't crash, but since I am new to this subject, please let me know what you think. Also, since it has been mentioned in the forums in threads regarding the high IOH temps that a lot of after market coolers leave little room for cooling of the heatsink...which brand/model/type of an after market CPU cooler according to you folks should I go for ?
Also, is there a possibility of slightly OCing the system, say up to 3 GHz, with the stock cooler, or should I start saving for a good CPU cooler ?

Quote from: Aaron on 11-February-10, 12:28:13
84 at stock? Something wrong there. Shouldn't even be going over the 50s. Make sure you installed the CPU cooler correctly. If you reinstall it and the temperatures are the same, then the chipset heatsink is making little/obscured contact and needs to be reinstalled. A fresh blob of TIM on the chipset wouldn't hurt either. (Doing both the CPU and chipset coolers would not hurt one bit.)
I still don't know why MSI's IOH temperatures are still so high. It's been months now and they still have this inconvenience/issue.
Thanks a lot for the information. I have re-checked and the CPU cooler is installed fine, is fixed tight. I will try your other suggestions as soon as I get the thermal compounds. Sidenote- Arctic Silver Ceramique should be fine, right ?
Quote from: HU16E
IOH is ok, but if you feel adventurous, new TIM & adding a nylon washer between the stock washer & spring should help. The Antec Spot Cool is a great temp reducer. All my rigs run a Zalman 9900. One reason I like it on an X58 rig, is because it gives a little passive air onto the IOH similar to the stock cooler. smile
Added: Once you get that high CPU at load figured out, you should be able to run the stock cooler up to around 3.5-3.6 with no problem.
Thanks HU16E, your posts on the other thread (on high IOH temps) have also been useful. I will look into buying the Zalman 9900, thanks for the info.
I hope I haven't done any damage to the CPU by running that stress test for an hour. (n00b query: why didn't my system shutdown at such high temperature ?)

MSI pro s3 standby

Before I get flamed I just want to say that I HAVE searched this problem, but could not seem to find a definite answer, so please don't yell too loudly.
Anyways, I have an MSI pro, and I can't get the S3 Standby state to work. The computer goes into Standby, but when I turn it back up (with the power button, or mouse, or keyboard when I have it enabled) the computer starts up but nothing is displayed on the screen, it is not even receiving a signal. The keyboard lights also don't light up (Numlock, etc). I have tried adjusting bios settings till my face is blue, same with the Windows XP settings. I have the latest ATI drivers for my 4870x2. Any help would be much appreciated. The only way to fix it is pull the plug or hold the power button down for 6 seconds until it shuts down. Oh, and I have bios Version 7.0.
Thanks.

Quote from: StiebelEltron on 22-April-09, 20:38:36
Hi!
I have exactly the same problem as knexkid.
My system:
MSI X58 Pro (BIOS 7.1), Core i7 920, GTX260, 6GB DDR3 1333, bequit 550 Dark Power Pro PSU, Vista Business x64.
My CPU is running at a BCLK of 175. But what I found out is, that S3 does work, if the CPU is not overclocked.
I tried various BCLK-Speeds testing if S3 works or not.
133 S3 works, 140 S3 works, 150 and higher S3 doens't work.
It would be interesting to know if knexkid's PC shows the same behaviour.
If that's the case, MSI's answer doesn't help much.
I think that some clock (QPI, Uncore Clock, etc.), that is depending on the BCLK is running out of it's specification and causes this behaviour.
Anyone any further ideas?
My system is similar to yours, just different power supply, and I'm using OCZ 12GB ram. My S3 works perfectly in Vista Ultimate x64. I'm not running this system overclocked, CPU standard specs.

MSI Pro-e

This is driving me mad! I just recently installed a corsair h70 to my setup. After doing so i keep getting the 1 long beep with 2 short ones following it. From what ive been reading my other forums it has to be either the ram or the video card. Well iv reseated the cards and made sure the power was connected. I also tested it with another video card i know works. I actually tested the board with a completely different set of ram too. Ive tried resetting the CMOS and checked to see if everything was plugged in correctly.
Basically all the computer does is boot up ( fans start up and lights turn on motherboard ) then after my mouse lights up i get the beeping noises and everything just stops.
i7-920
MSI Pro-e
6GB Corsair ddr3 ram
Evga 285 sli
Win7 x64

MSI Pro-e ( not the usb 3.0 version, bios version 8.C ); i7-920 ( reset cmos so stock ); Corsair H70 dual push pull fan; 3x2 GB DDR3 Corsair CMX6GX3M3C1600C7; EVGA 02G-P3-1186-AR GeForce GTX 285 Superclocked Edition 2GB ; 2x Western Digital VelociRaptor WD3000HLFS 300GB 10000 raid0; WD 300GB SATA HDD; BFG Tech EX-1200 BFGR1200WEXPSU 1200W Continuous; HAF 922; Win 7 x64;
Hopefully this helps. The board is just over a year old, it shouldn't be on its last leg already! lol The board worked fine before installing. The last time i had this error was when i forgot to plug in the video card power cables lol. Thats not the case this time.

MSI Eclipse PLUS Problem, HELP ME !!!

Sorry for my poor English, I am an Italian boy!
I bought a MSI Eclipse and I assembled a PC
check all connections and perfect, first switch
black screen, no signal, I think the GPU, the change .....
but nothing, black screen, NO signal video !!!!!
What is the problem ....????
I state that I CPU core i7 930, may be the problem ...????
CPU does not support possible black screen!!
I do not think since at least the post bios should see!!
Help me please!!

Thanks Henry for information
I decided to make a change, through a support bracket
put a small fan (60mm) near to the chipset .....
As soon as I made the change post some pictures
Hope will be a nice work!!
Thanks again!!
this is my new PC
Configuration HW my new PC:
Case: Cosmos Black Edition (Fantastic Case)
Power supply: Corsair HXEU 750
Motherboard: MSI Eclipse PLUS X58
CPU: INtel core i7 >> 930
Cooler CPU: Zalman CNPS10X Extreme
RAM: G.Skill Ripjaws DDR3 1600MHz
Graphic Card: Sapphire HD 5770
SSD System: INtel X-25 M/G2
HD Storage: Samsung Spinpoint F3>500GB
Audio Card: CREATIVE SB X-Fi Fatal1ty
System Speakers: Logitech Z2300
Keyboard: Razer Lycosa Mirror Gamer
Mouse: NZXT Avatar Black
Mouse tensioner: Roccat Apuri
Rheobus: Aerocool V12 XT
NEON UV: Revoltec Neon Twin-Set
Group Fan: Noiseblocker BS XL2R
Monitor: BenQ E2420HD
Operating System: Win 7 Home Premium 64bit

[MSI PRO MOD] IRON MAIDEN bY Mario Viana (2XHAF XB)

【MSI PRO MOD】 IRON MAIDEN bY Mario Viana (2XHAF XB)
DESIGN: Iron Maiden: COOLER MASTER HAF XB DUAL "Modder MVIANA"
I apologize for the photos, they are mobile and also do not dominate the English
The hardware is not as current, however still gives a broth, and in the end this is a casemod contest and not enthusiasts.
The basis of waste offices will be two HAF XB.
Hardware:
MSI XPOWER BIG-BANG.
2 Video Cards MSI GeForce GTX 580 Lightning Xtreme Edition 3GB.
Processor Intel Core i7 LGA 2011
memory Kingston
Kingston SSD HiperX? 02 Units in Raid 0
HD 2TB Black Cavia.
Source Cooler Master, 1300Wats.
2 Offices HAF XB.
Custom cooling.
Tube transparent hard acrylic.
Fittings and EK Bitspower.
2 Radiators Black Ice GTX 360.
EK water block for the processor.
2 Water block for boards Bitspower Video.
3 Monitors Benq XL2420T
NVIDIA 3DVision glasses 2
Airbrushing by Master
Initial idea.

Top of the cuts to make the union of the two cases.
Good Guys, as the top of the case will all connections motherboard features, the challenge there
will create something that hides the wiring and change the characteristic of the case so do not be appearance
a square box, lebrando that the design and craftsmanship throughout.
Taking the mold and transferring the markings for the role.

MSI Pro-E X58 help plz plz plz

Similar Messages

Maybe you are looking for