MSI R4350 and no 2560x1440 choice

Hello, I just bought your product (/product/vga/R4350-MD1GD3H-LP.html#/?div=Specification) and can't get windows or catalyst to show the choice for higher than 1680x1050
The monitor I'm using is Dell U2711, it is connected with a Dual Link DVI cable - have installed Dell drivers and the inf file has the resolution in it:
[1920]
HKR,,MaxResolution,,"1920,1080"
[2048]
HKR,,MaxResolution,,"2048,1152"
[2560]
HKR,,MaxResolution,,"2560,1440"
Also tried with newest drivers from the video card page and cleaned and tried newest from official AMD page.
Please help me

I wish the problem might have been something that easy. The motherboard that this card WILL work with was being powered with a 650W with a +12v of 28A. (the power supply issue was my first guess too so I removed that power supply and installed in into both of the systems which I wanted to use the card with. Symptoms were the same. No POST, and an endless 'reset cycle' . I am suspecting that it might be a bios compatability conflict with the onboard chipsets, as both of the incompatible boards have the ATI 200 Xpress onboard graphics in common (RS480M, SB400) .
Thanks for taking the time to answer. It's a pretty new version of the R4350 MD512H (difference being a "D3" suffix and a core clock of 650, as opposed to 600MHZ). I didn't have much hopes that it would have been a common enough issue (yet) to have come to your attention.

Similar Messages

MSI Lighning 7970 card 2560x1440 problem (with DELL U2711)

Hello. I have trouble with my display and 2xMSI 7970 Lighning graphic cards. Could someone help me?
Configuration:
Core i7 2600K running on gigabyte P8Z68-V motherboard with J.3603 BIOS
2 MSI Lighning 7970 cards without crossfire connector inserted (I don’t need crossfire for gaming – just multimonitor configuration for graphics).
The BIOSes of the cads are the same-from-the-box and was identified like MSI.HD7970.3072.120411.rom in the GPU-Z database.
The numbers in the GPU-Z’s “BIOS Version” is 015.013.000.010.000000 (113-AD40900-X01)
The BIOS numbers in the MSI Live Update is TV278MS.102
And the serial numbers from the stickers of the card’s boxes are:
602-V278-02SB1204058976 and 602-V278-02SB1205129844
All stuff running on Win8.1x64 system.
I have 3 displays: 2 of them are Samsung 245T running 1920x1200 and the last one (the new one) is DELL U2711 (witch is capable for running 2560x1440 resolution).
Now, THE PROBLEM.
When I running 2-displays configuration (2xSamsung 245T connected via DVI) there are no any problems at all: all works fine. The problem with the 3d display and it’s 2560x1440 resolution. I tried different cables and both cards, but display couldn’t run correctly.
1) It is running fine but ONLY 1920x1080 resolution when connected via DVI. There is no 2560x1440 settings at all in windows system then. I tried both cards and both DVI-ports, also I tried different DVI cables. No matter. It’s only 1920x1080. The drivers for the display panel was installed from the dell’s official site and the’re latest (as I could see..)
2) When I tried to connect the display via DisplayPort cable to my cards (no matter which of them or which of 4 display port’s connector on each card) it COULD RUN AT ALL. Usually the display showing up correctly with the right resolution (2560) but the screen is blank (black). After some time monitor goes to the suspend mode.
From time to time display could shows some desktop with terrible quality (I get the photos of it) for 2-3 second and then it’s blank again.
Also when connected I get the error “DisplayPort Lower setting applied” from time to time.
3) I have tried some DVI-Displayport adapters (witch was in the box with the MSI cards) and the result is the same as in 1) - only 1920x1080 resolution...
The display is fine and it works perfectly on another system (without MSI cards). What’s the problem? Should I upgrade BIOS or something to work in 2560x1440? Thank you.

the poor quality of the screen (when it shows up for 1-3 seconds with DisplayPort connection)

MSI K8T and 3400+ HUGE problem

I'm in computers since 1993 and I've never had a single problem I was unable to deal with. But my last 4 days have become a nightmare . I guess it's finaly time to ask someone for help.
So I descided to make an upgrade and got myself a MSI K8T Neo-FIS2R motherboard and a AMD 64 3400+ Clawhammer CPU. The expected from me 10-minute long upgrade operation became as I already said 4-day long and I still don't see light in the tunnel.
So what the problem is - I put together the hardware but when I pressed the power up button I got "Bios not installed" message at start up along with "CMOS settings wrong" and "If you have built SATA Raid array prevoiusly go to p20378 SATA controller set as raid".
Press F1 to enter setup
Press F2 to load defualt values and continue
If I go into bios and set the time etc. and reboot the system it hangs. The PC seems to reset but the monitor shuts down so I don't know if the PC is hanging or I'm losing the signal to my monitor?
If I press F2 Windows XP loads up fine but I can not change my agp setting etc. as the system fails to boot after saving bios config and I have to clear the CMOS using the jumper in order for me to restart the machine. When I shut down the machine in XP I still have to clear the Cmos in order to boot.
Even if I'm willing to clear the CMOS every time I want to turn my PC on there's still another problem. After eventualy Windows XP loads the CPU is running on rediculous 800 MHz instead of 2200 MHz. The problem is the multiplier which is set on x4 and won't move from this possition. The problem is not Cool'n'Quite because I don't have the software for it installed under Windows XP. And using the BIOS default settings by pressing the F2 button in the begining I guess is turning the Cool'n'Quite off in the BIOS.
I updated the BIOS and all the drivers to the last from the MSI webite using the last version of Liveupdate 3.
I even tried changing the Cmos battery even though the MoBo is brand new. Still same thing.
Pleaseeeee give me some ideas of how to sort the problems out. I'm really geting MENTALY unstable

Hello again and thank you for the quick respond. I'll start with the system specs first:
MB MSI K8T Neo-FIS2R(601-6702-010)
CPU AMD Athlon 64 3400+ Code name Clawhammer Brand ID 4 (Core Speed 801.8MHz, Multiplier x 4.0 HTT 200.4) - CPZ v 1.31 results
CPU Cooler Gigabyte 3D Rocket PCU22-se
GC nVidia 6800 GT 256 MB (Leadtek)
RAM 1x 512 MB Corsair Value PC 3200 / 1x 512 MB MTec PC2700
HDD 30 GB 2 MB Cache 7200 rpm Maxtor DiamondMax Plus 8 ATA/133 on IDE 1 with jumper set as Master
HDD 160 GB 8 MB Cache 7200 rpm Seagate Barracuda Ultra ATA on the same cable attached to IDE 1 but with jumper set on Slave
CD-RW Drive LG 52x24x52 GCE-8520B
DVD Drive LG GDR8162B
PSU Jeantech 450 W http://www.jeantech.com/450.htm
... and a floppy
Now to answer on your questions 1 by 1.
First of all the fisrt thing to do after the software war was to change the Cmos battery with a new one and try - no good - still the same problem.
Second - The PSU I belive is sufficient. And Yes I have the 4 pin/12 V power connector for the CPU power connected.
The D-Bracket - after I start the computer it gets to the screen with the F1 setup or F2 load default and continue. As I said before if I press F1 and make all the BIOS settings as time, date, sequence etc. and press Save changes to BIOS and Exit the PC seems to reset but the monitor shuts down. At this time D-Bracket indicates "Early Chipset Initialization" (Upper left light in green and the rest in red) and stays like this forever. After I clear the Cmos it starts again and it gets to the same screen with the message "CMOS settings wrong" and the 2 choices F1 setup or F2 load default and continue.
Fourth - I don't have any SATA drives at all.
About memtest - I got the banks of RAM from my WORKING PC and just installed them the new MoBo. And because one of them is 333 DDR I descided to remove it and try with only the Corsair one which is 400 DDR. I tried and vice versa too - still the same problem.
As I said before if I choose F2 and load the default BIOS settings Windows XP loads and the PC is stable - no random resets or any unstability problems whatsoever. Problem is the CPU is working on only 800 MHz - because of the x4.0 multiplier.
That's all I can say. Please give me some advise - I haven't had normal sleep for 5 days already - I just can't accept the fact that I can't manage to sort out my problem. Thanks again!

MSI 6315 and RAM above 512 Mb

Hi,
I recently had to have my old pc's motherboard replaced. The old one was an MSI 6199VA and I had 768 Mbyte RAM installed. The manufcturer told me it was impossilble to get a 6199 motherboard as it was too old, so he installed the MSI 6315 one in place. HE says the motherboards are so old they are not manufactured any more, so the 6315 was his best choice.
However, on booting the computer I have seen that it is only able to detect 524 Mbyte out of the 768 I had previously installed. I have read the motherboard manual and I think for the comments there that the 6315 model does not support more than 512 Mbyte. It is however not totally clear to me.
Is this correct ? Does the 6315 motherboard only support 512 Mbyte ? If so, is there any way I can configure it to go over the theoretical limit imposed ?
Thanks a lot in advance

Hi
According to the motherboard specs posted on the msi support page, your motherboard will only recognize 512 meg of memory. I know of no way to make the motherboard see more since it is a chipset issue. See link below for the spec page where you can get manual and cpu support information.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=14

MSI R4350 bad device driver

i got this MSI R4350 graphics card for xmas and it worked wonderfully until i updated my desktop to win 8 and not every time i try to use it as the graphics card it says bad drivers i am up to date on the driver idk why it wont allow me set it as the graphics card it keeps auto setting to the one on my motherboard

windows 8 doesn't like any hardware thats more then 2-3 years old!
thats why your getting a odd message (maybe later HD5000 will be problematic too but HD6000 series cards should be ok) so there is nothing much that can be done probably as your Graphics card is old and is not supported!

MSI KT3 and G4TI 4200 problems

Hello,
I'm having some problems with new MSI hardware and hoping to could get some advice. I've read though the forums but I'm left more lost and confused than enlightend ?(
Problems..
1. Cannot get MSI G4 4200 to run in AGP 4x. Once enabled in bios 3D Mark 2001 and all games crash in 4x mode. Ok in 2x.
2. Cannot get Live update to work with any Nividia drivers. (Need MSI Video card) It says..
3. Cannot get 3D! Turbo Experience to run. Get an MSIVGA.ocx ininalization error. Then get a popup box saying..
***MSI VGA Monitor Warning Message***
Memory I/O voltage is unusual
Now memory I/O voltage is : 2.69 Volt
Memory voltage is unusual
Now memory voltage is : 3.26 Volt
What?
Though PC Alert nor SiSoft Sandra reports any errors.
Motherboard: KT3 Ultra with latest bios installed
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=11&MODEL=MS-6380E
Video Card: G4Ti4200-VTP MS-8886
http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=350&MODEL=MS-8886
Power supply Unit: 350W Enermax • EG365P-VE FC
http://www.enermax.com.tw/product.htm
WindowsXP Pro SP1
Nvidia beta drivers 4072
AthlonXP 1700+
512 Megs PC 2700 Samsung DDR Ram
Creative Soundblaster Live Platinum 5.1
Seagate 60 Gig ATA 133 Drive
Thanks

You could install MSI's PC Alert 4 and monitor the voltages and temp.
http://download.msi.com.tw/support/swr_exe/pcalert4.0.0.2.exe

I want to order photos on iPhoto. I have logged in one photo, and then my choices are cancel and buy now. How do I order more than one photo at a time?

I would like to order more than one photo on iPhoto. I have downloaded one picture, and then my choices are cancel and buy now. I would like to download other photos to have them printed, too. How do I do that?

Wich version of iPhoto do you have? You need iPhoto '09 or '11 to order prints.
Make an album of all photos you want to order in the same order.
Then select all photos at once, when you use Share > order prints.
You should see a panel like this, where you can mark the quantities. The screenshot is from iPhoto 9.6:

Default acrobat xi pro send mail to default email application and remember my choice 2008R2 remote desktop server

I have 2008R2 Remote Desktop Servers with Adobe Acrobat XI pro. When a new user tries to send a pdf via email, it pops up a message "How would you like to send this email" they have to pick "Default email application (Microsoft Outlook) and Remember my choice. Then the next time they try to send an email, the get a warning "This email will be sent using "Default email application (Microsoft Outlook)". Click on 'Change Preferences' to change your default account settings. They have to Click Do not Show this message again, and then continue. (actually I have a couple of users that have to go through this process Every time they sign on to the remote desktop server),
I downloaded the group policy adm pack and I can not find any settings to default this for a user.
Is there any group policy settings or a registry entry I can make on the remote desktop server to default these settings?
Thank you in advance

Distiller is a different product. The prefs should go under Adobe Acrobat.
BTW, are you familiar with the Admin Guide and the Pref Ref? Acrobat-Reader Enterprise Toolkit Home
Examples:
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\AVAlert]
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\AVAlert\cCheckbox]
"iDigSigSaveAsCertified"=dword:00000001
"iAppDoNotTakePDFOwnershipAtLaunch"=dword:00000001
"iavARMNoAutoUpdateWarning"=dword:00000002
"iDontShowWarn"=dword:00000000
"iSendMailDefaultAccountAlert"=dword:00000001
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\AVAlert\cCheckbox\cAnnots]
"iEmailCollisionConfirm"=dword:00000001
"iSharedReviewConfirm"=dword:00000001
"iSendForReviewConfirm"=dword:00000001

HT2305 I downloaded, and have two .msi files and one setupadmin.exe file. I click the latter and nothing happens?

I downloaded 2 updates (download only), and there's two .msi files and one setupadmin.exe file. I click the latter and nothing happens? How am I meant to do install these updates?

Sorry I forgot to mention I was doing this on a PC with Vista (the heading was Windows so I didn't bother to mention this). Anyway by trial and error I found that you can click on the .msi files to install them. The files were downlads of updates to iTunes and iCloud Control Panel.

I plugged in my ipod to my computer and I had the option to sync the new software and I did. Just as it was done itunes couldn't recognize my ipod and my only choice would be to restore back to store settings but I would loose ALL my data :(

I plugged in my ipod to my computer and I had the option to sync the new software and I did. Just as it was done itunes couldn't recognize my ipod and my only choice would be to restore back to store settings but I would loose ALL my data

Yes, you probably will but then you simply load your backup.

MSI Drivers and Utilities DVD won't work

Hello, I've just purchased the parts to construct an entirely new computer, and I've chosen MSI Z77A-G41 motherboard. I put everything together, and I loaded Win XP on, and my plan is to upgrade to Win 8 during their special offer. I needed to go into Setup and change the SATA mode from AHCI to IDE, so that I could install XP. Once I had XP up and running, I inserted the MSI Drivers and Utilities DVD to load all of the drivers. However, when I put the disc in, it auto-runs, the driver/utility screen is shown 'blacked out' and I immediately receive a Windows error message: "DVD Setup Application" error. I went in through Windows Explorer to the programs on the DVD, and found DVD setup. By trying to run this from within Explorer, it takes me to the same error as when I auto-run.
The only thing I can think of is that I need to change something else in Setup, to run Win XP because it's so old? I'm pretty sure that there's nothing wrong with the new DVD burner, because I've used it to install XP, and also to extract and install Service Pack 2 and 3 (which I downloaded on another computer and transferred on a CD). If I knew exactly what needed to be installed from the MSI DVD, I could try doing it from within Windows Explorer. But, I'd still like to figure out what the Setup Application error message is telling me.
Any helpful suggestions will be appreciated.
Thanks!

A further note before I head off to bed. I was able to install Win XP service packs 2 and 3 using my new burner, and I've activated with Microsoft and downloaded and installed 117 updates. I have now used this same DVD burner that won't recognize or work with the MSI driver/utilities DVD, to install all of the drivers for my video card---that DVD auto-ran just fine. So, after doing some searches on Google about the "DVD Setup Application" error, not a lot of help but most people say that if another DVD will spin up and load things OK---it must be the fault of the DVD that won't load. In other words, I don't think that there's a problem with anything in the Setup on the motherboard.
So, if anyone has any further ideas, please let me know. Otherwise, I'm going to contact MSI tomorrow and see about a replacement DVD. Thanks.

I lost an .msi file and cannot do updates, how do i fix the file?

I lost an .msi file and cannot do updates to my Itunes system, Apple has not been abe to help, where do i find the .msi file or how do i repair the system? All prior updates to the system have worked, but the latest 10.5.2 will not update due to this lost file.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

HT1349 I am unable to download the newest version of iTunes 10.6 as i am missing .msi files and window installer package, can you please remove the old version and reinstall newest version, please?

missing file to download itunes 10.6 - .msi. file and installation package

Try to follow this guide to uninstall iTunes and all of its components: http://support.apple.com/kb/HT1925, then reinstall the latest version of iTunes. You must follow this guide for this to be successful (uninstalling all components in the order specified). This will not touch your iTunes library or data.

Why isn't the App Store and iTunes a choice for an app on my mini?

Why isn't the App Store and iTunes a choice for an app on my mini?

Either they've been moved to another home screen or dropped in a folder, in which case doing a search or resetting the Home Screen layout (Settings/General/Reset) should bring them up, or they've been turned off in General/Restrictions.
Regards.

Cannot open msi clock and msi info

hi i am having some small problems with my
mx440-td8x.. when i open the properties for the card i cant open the options msi information and the msi clock. it says: error when the file f:´WINNITsystem32desk.cpl for the controlpanel was opening. what shal i do to fix it?

Guys,
You could go get the latest nVidia Detonator4 Drivers from the nVidia Website. Then you can delete the file msicpl.dll from your Windows directory.
For the extra features:
Use notepad to make a new file and put in it what I quoted below and then save it with the .reg extension.
Quote
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWARENVIDIA CorporationGlobalNVTweak]
"Coolbits"=dword:ffffffff
"NvCplEnableAGPSettingsPage"=dword:00000001
"NvCplEnableAdditionalInfoPage"=dword:00000001
"NvCplEnableClearViewPage"=dword:00000001
Double Click on it and it will make an entry into your registry.
That will open all the extra options in the Detonator4 Drivers including the Core and RAM Speeds for your GF4.
Take Care,
Richard

MSI R4350 and no 2560x1440 choice

Similar Messages

Maybe you are looking for