MSI R4350 bad device driver
i got this MSI R4350 graphics card for xmas and it worked wonderfully until i updated my desktop to win 8 and not every time i try to use it as the graphics card it says bad drivers i am up to date on the driver idk why it wont allow me set it as the graphics card it keeps auto setting to the one on my motherboard
windows 8 doesn't like any hardware thats more then 2-3 years old!
thats why your getting a odd message (maybe later HD5000 will be problematic too but HD6000 series cards should be ok) so there is nothing much that can be done probably as your Graphics card is old and is not supported!
Similar Messages
-
MSI Z77a-G45 graphics driver issue.
02-june-2013
MSI Z77a-G45 graphics driver issue.
Trying to install the graphics drivers for this board from the MSI site, I but every time I do so on loading windows 7 my monitor just goes to sleep and I have to roll back the driver in safe mode. This is the same for the driver found in the windows 7 updates.
Iv downloaded the files a few times over and reinstalled windows twice and the problem remains. Can anyone suggest anything? Is there something I’m missing or need to set in the UEFI bios for using the onboard graphics?
MSI Z77A-G45, i5-3570K, 2x 8GB Corsair memory, Windows 7 64bit.
Thanks.My BIOS is E7752IMS V2.10
Iv already downloaded V2.A
However I have to say the guide at uk.msi.com/service/biosupdate/ , appears to be putting v2.2 on top of v2.2.
it also says "Download the BIOS that matches your motherboard and version number to your USB device."
I'm not entirely sure what is meant by 'version number' but it dose suggest i need to download V2.10 not V2.A ... call me picky but i want to be sure! lol.
Can anyone confirm ether way? It dose seam rather odd!
Thanks.
**edit
Update on my graphics issue
With the default driver, just before the windows 7 log in screen appears. I was getting a portion of it appear first on the bottom 1/8 of the screen. Now its appears to be a snowstorm of bad graphics and its the same when I switched to using HDMI instead.
Not sure if that's a good sign!
For reff my screen is a HP LP2475w tho I'm rather sure there is nawt wrong with the screen. -
IPhone not showing up in iTunes- device driver issue?
I'm having a problem getting iTunes to recognize my iPhone. I'm running XP Pro 64-bit. I know iTunes isn't supposed to work with x64 XP, but I've had it working for months now (by doing a quick edit to the .msi installer it will install on XP). I'm using the newest iTunes 8.1 and the new 3.0 iPhone OS (yes, im on the developer program). When i plug it in windows beeps and gives me the camera wizard, but iTunes does nothing. I've tried updating the driver in device manager and choosing "i will pick the driver to install" and then picking the apple mobile device driver. i clicked "continue anyway" when it told me my face was going to melt off if i use this driver. I went to help in iTunes and ran diagnostics; everything passes on the connectivity tests, but then it tells me "one or more sync tests failed". I had it working 2 days ago with the 3.0 and iTunes 8.1. it just all the sudden stopped working. any help is greatly appreciated. i thank you in advance for your time.
If you are a registered developer - the iPhone SDK runs on an Intel Mac running OS X Leopard only, then you can visit the Developer Forum for the SDK (which isn't supported with Windows) and for the 3.0 BETA, which is for IPhone and iPod Touch app development, which requires an Intel Mac running Leopard.
-
SOLVED - iPhone Bricked by Update Device Driver Not Installed Error 1602
iPhone 4 / Windows 7 x64 / iTunes 9.2.1.5
My iPhone normally interfaces with iTunes on my PC via USB cable without issues.
iTunes prompts to update the iPhone when a new version of iOS is released. Each time, the update has failed as described here: http://support.apple.com/kb/ts1275.
The update process stops, the "Connect to iTunes" screen is all that displays on the phone, and an utterly informative alert message comes up in iTunes along the lines of "Error 1602 (or 1604), The iPhone could not be restored. An unknown error occurred." Along with this, the iPhone ceases to be recognized as a USB device by Windows 7, with a little notification tray pop-up informing me that "Device Driver Software was not successfully installed". The iPhone no longer shows up as a device in iTunes.
The generic troubleshooting steps listed at http://support.apple.com/kb/ts1275 (changing USB ports, changing USB cables, restarting the computer, uninstalling and reinstalling all Apple software, etc., etc.) were a useless waste of time, but following the links for USB troubleshooting led to this page: http://support.apple.com/kb/TS1538
As instructed there, I located the Apple Mobile Device USB Driver in Device Manager. It appeared listed as "Apple Recovery (iBoot) USB driver" with a yellow exclamation point; thus I attempted to reinstall the Apple Mobile Device driver. First I uninstalled the existing driver, then scanned for hardware changes, then tried to update the driver as described. However, the path where the driver files were supposed to be (C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Driver) did not exist; the Driver folder was missing.
After Googling a little I came across http://discussions.apple.com/thread.jspa?threadID=1949672 and http://discussions.info.apple.com/thread.jspa?messageID=10806341. Following the instructions there, I was able to pull the device drivers (usbaapl64.sys, usbaapl64.cat, usbaapl64.inf and usbaplrc.dll) out of the iTunes installation program (from AppleMobileDeviceSupport64.msi, using WinRAR / Universal Extractor), put them in the previously nonexistent Driver folder and make Windows use the drivers.
Happily, this manual driver reinstall allowed Windows / iTunes to recognize the iPhone and proceed with the update / restore process. I had to repeat the driver reinstall process a couple of times during the iPhone restore - as it progressed, it kept switching the driver back to something nonfunctional - but the restore eventually went through, allowing me to keep my apps, data, history, etc. At least, until the next iOS update.Hi liam3w,
Please try to reset BIOS, if problem remains, please kindly contact local lenovo for hardware inspection.
Please enter BIOS be pressing F1 in "ThinkPad Screen", F9, then F10.
Fred
T61 + X201i -
Hi everyone,
I'm trying to deploy a Windows Embedded Standard 7 (trial key at the moment) image in SCCM 2012 SP1 with a very simple task sequence.
I have a 'build and capture' and an OSD TS. I'm testing these on Hyper-V PCs and both work fine when i create stand alone media. The problem arrises when I try to deploy (or build & capture) with a bootable media;
The TS starts, formats the disk, applies the OS, Windows and network settings, Apply Device Drivers etc., but when it reboots into Windows
(or WES7 to be exact) it cant boot. The Windows Boot Manager reports a 0xc0000359 for storvsc.sys
And I can't figure out what's wrong. I will post the SMSTS log further down below. The SAME TS works fine when it's a stand alone media.
I have tried to:
- Apply the WIM manually (nothing wrong - boots fine)
- Create and apply driver package for the Hyper-V machines (from the MSI's Windows5.x-HyperVIntegrationServices-x86 and Windows5.x-HyperVIntegrationServices-x64)
- No dice
- Create a new boot image with the hyper-v drivers in it. No dice
- Google everything related I can think of.
I suspect it has something to do with the lines where it says:
"Failed to find a suitable device driver for device xxx”
It also has a couple of 401 errors when trying to get the packages, but it seems like it DOES end up getting the content.
Please help! What could it be?
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
SMSTS log key points are (the log is too long to post here):
401 - Authentication failure on request with anonymous access, retrying with context credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/s3cap.inf to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\s3cap.inf
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vmbusvideo.cat to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vmbusvideo.cat
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vms3cap.sys to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vms3cap.sys
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Download done setting progress bar to 100
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) VerifyContentHash: Hash algorithm is 32780
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Installing driver "Microsoft Emulated S3 Device Cap"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Adding "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to Windows driver store.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting %SystemRoot% to "C:\WINDOWS"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "amd64"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Added list item with key value '1'
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Calling Package manager to add drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Command line for extension .exe is "%1" %*
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Set command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Executing command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Process completed with exit code 0
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Dism successfully added drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Successfully added "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to the Windows driver store.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Successfully installed driver "Microsoft Emulated S3 Device Cap".
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) reference count 1 for the source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA before releasing
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Released the resolved source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{57164F39-9115-4E78-AB55-382F3BD5422D}\{FD149E91-82E0-4A7D-AFA6-2A4166CBD7C0}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Intel 82443BX Pentium(R) II Processor to PCI Bridge'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Generic Monitor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{A9A0F4E7-5A45-4D96-B827-8A841E8C03E6}\{242FF919-07DB-4180-9C2E-B86CB68C8C55}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Numeric data processor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{35FA2E29-EA23-4236-96AE-3A6EBACBA440}\{2450EE40-33BF-4FBD-892E-9FB06E9214CF}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'CD-ROM Drive'.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Exiting with return code 0x00000000
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264)
In advance: Sorry...Hi,
0xc0000359 for storvsc.sys
Looks like Hyper-v Storage Controller driver issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Solaris 10 GA and 64 bit Pentium Processor. Device Driver Problem
We have a Dell Poweredge SC420 with 3.4 GHz Pentium 4 (EMT64)
it also has 300Gb SCSI disk and 2 Gb Ram.
By default this machine tried to boot with the 64 bit kernel then could not load the CADP driver (SCSI CARD). We forced the Kernel to 32 bit by changing the BOOT_FILE from /kernel/AMD64/unix to /kernel/unix.
The machine is now booted but we are having problems with our PCI device. The device is a DMA Bus master and works fine on another SC420 which has a 2.8GHz Non-64 bit processor running the same release of Solaris. The device driver fails in strategy when we try to bind the dma buffer,(ddi_dma_buf_bind_handle) returning DDI_DMA_TOOBIG when the cookie count is > 1.
The machine appears to function apart from our device although we have suffered some kernel panics. We cannot ascertain if other devices are performing DMA successfully but must assume that they are.
Anybody got any ideas, Has anyone else got this processor working?My bad. The memory per guest domain is 1GB. Se the Section 1 (NEW) - Hardware http://wikis.sun.com/display/SolarisLogicalDomains/LDoms%20Community%20Cookbook
Ignore the http://www.sun.com/software/solaris/specs.jsp -
Device drive of lab view fpga 2013 for Spartan 3E FPGA
Hi NI
I has get labview 2013
but I need FPGA device drive of Spartan 3E
can NI release it for us !!!!!!!!!!!!
best regards
hi ?Q>T-REX$ wrote:
Hey mangood,
There currently is no support for the Spartan3E board in LabVIEW FPGA 2013, and I am not aware of any plan for developing support in the near future. Sorry for the bad news...
DEAR
i have lab view 2012 and it has device drvie for spartan FPGA
only one year
may be can NI do this its simple
thank
hi ?Q> -
Equium A60-157: error caused by device driver
Hi all,
I'm trying to write my PhD thesis at the moment and am being hampered by my laptop! It keeps randomly bringing up the blue screen of death and then restarting; when it's all loaded up, I get a 'serious error' message that says 'error caused by device driver'. As far as I know, all the programs I have are compatible... I was advised to restore factory settings, which I did a few months ago. And I've had the BIOS update suitable for my computer. But it's still happening!!
If it helps, the programs I use daily are Microsoft Word, Access and Powerpoint, Internet Explorer and MSN Messenger. I don't run any high spec games (only Minesweeper occasionally!)
What can I do? Does anyone else have this problem? Any advice would be much appreciated, as these crashes are not helping my work!
Thanks...Hi guys,
I seem to have a similar problem. About a month ago I reinstalled windows using the product recovery cd and three days later I started getting a blue screen. But the error occurs only when shutting down (not always, I can`t see any pattern)- right before the shut down itself, windows has already logged off and settings are saved. The error code is 0x50 and the report says it is caused by an unknown device driver.
The day that stop error started I installed an educational software (Leankey's) for which I used a virtual cd. But at the initial launch the program "freezed" and I had to close it and open it again, there wasn`t a problem. After that I tried to copy some files on a blank cd (without using any burning software) and it said that the device was not accessible.
I tried disabling DMA but that didn`t help. In the event viewer I saw error messages that say the cdrom has a bad block. I`m not sure whether this has something to do with the stop error but they started at the same time. I can still burn cds with other software (nero). I tried to update the device driver but it didn`t help.
Maybe I have to uninstall the driver first but from the device manager when I check the properties of the device (driver details) it uninstalls the device and the driver remains. Should I delete the driver files manually? I have checked all device drivers and they are all compatible. All installed software is digitally signed. (I immediately removed the Learnkey`s software but I think it has changed some dll...
I will appreciate any suggestions.
P.S. When I run the toshiba diagnostic tool it skips testing the cd/dvd but it doesn`t say why.
Details about my system:
Satellite Pro L10
MS Widows XP Pro 5.1.2600 SP2
BIOS: v 2.60 (updated 2 days ago)
Intel Celeron M 1.60 GHz
496 MB Ram
55.890 GB
Video: Intel 82852/82855 GM/GME Graphics Controller ver=6.14.10.3929
Sound: Conexant AC-Link Audio
Network: Realtek RTL8139/810x Family Fast Ethernet NIC
Modem: AC97 SoftV92 Data Fax Modem with SmartCP ver=7.12.13.50
IDE Device 1: Fujitsu MHV2060AT
IDE Device 2: None
IDE Device 3: Mat****a DVD-Ram UJ-831S Firmware=1.90
Internet Explorer:
6.0.2900.2180 -
TS1538 iPhone 5 and Windows 7 device driver not being recognized
I've de-installed in the correct order and re-installed all Apple software for Windows 7 x64 box.
I've manually added paths to the device driver.
I've re-scanned device manager.
I've gone through 4 different kbb articles.
Used 4 different USB ports on the Front Panel of this box.
I've restarted, stopped, started the Apple Mobile Device Service.
I've rebooted 15x, my Alienware R3 laptop works just fine.
I can see the iPhone 5 in iTunes, and this problem has been occurring with my iPhone 4.
Devices and Printers lists the iPhone and Apple Mobile Device USB driver without any conflicts on the exterior.
If you go into properties boom Unvailable. I've turned off every shield in Avast. I only have 1 A/V.
What else can I do?
The rig is a custom built i7 3770s, MSI motherboard, 16gb DDR 3 RAM, USB 3 support etc. I've tried everything... why won't my iPhone get recognized? I seriously do not want to wipe the box for a device driver. Does RDP software create conflicts with USB devices? I have a couple installed.Hi Allan,
I am using 11.0.4.4 version of iTunes.
Nilay -
AG2712A: "THREAD STUCK IN DEVICE DRIVER" BSOD
I am experiencing random computer restarts with the following error message: "THREAD STUCK IN DEVICE DRIVER" There are lots of results that basically relate to graphics card. For instance: http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=gen&docid=584512#Error6 but updating drivers or even reinstalling windows completely clean doesn't help the issue.
For now I've disabled AMD video graphics card in the device manager which stopped random restarts, but that's obviously not fixing my issue just a temporary workaround because I can't use the card for gaming. MSI recently updated AMD drivers, perhaps it's causing it. I hope someone has some other suggestions I can try.Quote from: carlos.m.nunez on 18-February-14, 12:46:47
I am having the same issue. Blue screen and same error. I know its a driver issue for graphics because i cant even play titanfall because of it. I would like to know what you did to figure it out. Bceause i cant figure out any updates that work or any alternative. Please someone help.
First thing is create a ticket with MSI. The more people report the more likely MSI will look into this. Then simply download latest amd drivers. When doing install I unchecked everything except drivers. Also, I am using beta. -
i've got tis error message since i reboot my 865
Bad directsound driver. please install proper drivers or select another device in configuration.
error code : 88780078
search on google, but didn't find anything working :/
i've tried re-installing the drivers but didn,t change anythingi got it
disabled the on board audio, boot and then enable it ad reboot... -
Found "A required CD/DVD drive device driver is missing" when installing Window 7 64bit.
Hello,
I just bought X220i with Core i-3, ram 8G. When I tried to install Window 7 64bit (Coz of Ram 8G), I got the message “A required CD/DVD drive device driver is missing...”. I did browse the driver (using USB 3 Driver) but, it didn't work.
Any idea to resolve?
Thanks in advance.
Solved!
Go to Solution.What media are you using to install win 7? USB DVD drive, flash drive, ??? Downloaded ISO or Lenovo or Microsoft DVD?
One reason (of many) you can get this error message is bad media - corrupt download, bad burn, defective flash or optical media. I've also heard of problems with USB ports causing this. If you're using USB media, have you tried another port?
And as NINE asked, when in the process do you get this error?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
NTKERN.VXD could not load device driver
I just installed the MSI 6380LE board with an AMD 2100+ CPU. I have the nVIDIAGe2 Ti video card. Two problems. When I restarted the computer after transfering my WD 20Gb HD, Phillips CD-RW, and SMC lan card to my computer it went thru the New Hardware sequence. No problems there. My printer was detected on the USB port in the back. However, when I went to print, got a cannot communicate with printer error from my Lexmark printer program. I went to my device manager and noticed that the following occurred:
VIA VT83C572/VT82C586 PCI to USB Universal Host
---> USB Root Hub!
This is repeated three times in the device manager.
When I click on properties for the USB Root Hub it tells me that the NTKERN.VXD could not load device driver.
Second issue. I have a new case that has front USB ports, however, the pin connectors are all separated and I am not sure how to hook them up to the MB correctly as I did not notice in the manual the pin assignments for those connectors. ANY help is greatly appreciated. And yes, USB is enabled for all in my BIOS setup.
Thanks in advanc!!!well I did the same thing with my KT3 Ultra ARU, but it works fine other than the low system stability and generally slow behavior of the HDD's since they were not optimized for this board.. but generally everything works fine, but I will need to reload windows in order to have everything moving smoothly again, plus when you do reload windows you will notice a definite speed increase, and if is generally a good idea to back up your important files and do a clean install ever so often, Most IT techs reinstall their OS's every 6-8 months.
-
WinXP reboots caused by a device driver problem??
Hi All the experts there,
I recently bought and installed a MSI 865GM2-LS Motherboard. However, after I installed WinXP, as each time I get onto the web, system reboots and telling me it's caused by a device driver. I installed every device drivers provided in the installation disk. Is there sth wrong with the hardware of just software problem?
This is really wierd because I've tried WindowsME with exact same hardwares attached and device drivers installed, it works perfectly!
Please Help!
MSI 865gm2-ls
P4 2.6G 800 FSB
Kingmax 512MB Memory
Seagate 120G HD
Pioneer DVD-RW A106
WinXP Home/ProfessionalSorry, I forgot to mention that there wasn't any problems AT ALL when I use the exact cable modem with another computer that has WinXP installed!! I don't think it's the problem of the modem driver.
Maybe BIOS configuration problems? Then, what is it? I have gone through numerous times and I can't think of anything I might be mistaken. -
Apple Mobile Device Driver issues
First let me start that I have read dozens of pages on the various Apple sites which attempt to help fix this problem - some are just plain awful, some make no sense at all (disconnect cable, do x y and x, but no instruction ever to re-connect cables - well how is that going to fix anything). Anyway my primary machine is a Vista Ultimate (32 bit) laptop, with iTunes 10.0.1.22 and the library on a NAS device. I have several iPods, including a Touch and they all connect and synch easily with iTunes. Two days ago I received an iPad and connected to this machine and got the dreaded - load drivers, errors, followed by the Driver load failed messages. Spent 1+ hours trying all the advice to no affect. The Device Manager shows no indication of the Apple Mobile Device driver and only shows the iPad for a short time under Other Devices with an Exclamation point. No note of a Mass Storage device there or in Windows Explorer. I then connected the iPad to my Windows & machine and it immediately was recognized and sync'd with iTunes. This afternoon, I went thru the same aggravation with a brand new Shuffle. No dice on the Vista machine, immediate success on the Windows 7 machine. Isn't there a SIMPLE way to get the driver installed properly under Vista. Pointed the driver process to the C:/Program Files/Common Files/Apple/Mobile Device Support/Drivers and there is some action, I see the driver, but again some process kicks in and the whole device driver failure process starts again.
This whole process is giving me a bad taste for i_software. I consider myself a sophisticated computer user (IT professional with hands-on PC experience for 20 years).I agree, but I have 2.5 years on this Vista machine and upgrading it to Win7 really means tossing it - not a bad idea; but next week I migrate my work PC (XP!!) - and I can only take 1 excedrine migrane a day!
Maybe you are looking for
-
How to attach two files in the send mail action
Hi experts I want to attach two files in the send mail action . I tried using ; as a separator but it did not work . Regards, Antonio R . Rubalcaba
-
Hi, I want to achieve the following: Have a sender SOAP adapter configuration with the following functionality: Expose a web method of the form string Method( string request ) In other words, I want to receive a 'request' as a string using a sender
-
Hello there , I have a question : if you could clear this up for me - how can I transfer my text messages from Nokia SUITE to Nokia Asha 306 in their exact order? I know this could be done, but I don't know how. Otherwise, why did technology evolve s
-
Problems from oracle designer to database creation
i am getting the following problem when creating a database using oracle designer: "has no role cannot regenerate" this is specific to the primary keys of each table has anyone come across this before? any ideas guys? Andy
-
Sending a OBIEE parameter to a VIEW
Is there a way to send an OBIEE parameter to a Database view? I have a DB View that calls a function, can I have OBIEE send a parameter for the function? Thanks