MSI R5570. Good Value Performing Card

Just tested this new R5570 video card from MSI. This VC sits between the entry-level 5450 and the mid-entry level 5670. So I guess it’s a value card with performance. The good thing about this card is, it is specially designed for HTPC types of PC and the rear ports consists of D-SUB, HDMI and DVI. Also this is a low profile card and the active cooling is enough for long period of use. Load temp usually goes up as 55 to 58c only.
Specs of the Card:
Core: 650mhz
Memory: 1GB DDR3 1600mhz Memory
Video Output: D-Sub / HDMI / DVI
GPU Size: 40nm
Test System Configuration:
Processor: i7 920
Motherboard: MSI X58 PRO
Memory: Kingston DDR3 2GB 1333mhz
Softwares: Windows 7 32bit, ATI Catalyst 10.3, Vantage and 3dmark06
Test results at all stock settings
Quote
Futuremark 3dmark06
Quote
Futuremark Vantage
Another test overclocked 920 @ 3.4ghz and overclocked 5570 (I overclocked the 920 just to check if the GPU score would go up but it didn’t hehehehe)
Core: 650mhz to 862mhz
Memory: 800mhz to 1092mhz
[quote[Futuremark 3dmark06 [/quote]
Quote
Futuremark Vantage

Thanks for your thoughts. The 5570 has a small fan. Is she quiet? Not quiet compared to the Intel cooler (which isn't very) but quiet to use in a low noise system...
I opted for the MSI 5750 (which is dual slot) and its larger fan is reasonably quiet. Performance is way more than I need since I don't really game. Gaming days are long gone for me.

Similar Messages

The Crew –Racing with Your Coolest MSI Gaming Motherboard and Graphics Card

Most gaming fans are crazy about racing games, and there is a new game title just launched to fulfill gamers’ dream. We want to share with you the experience from Taiwan user who assembles a rig with a brand new MSI Z97 Gaming 5 motherboard and 960 graphics card, along with a hardware and game (The Crew) benchmarks. You may find the original article from:
https://forum-tc.msi.com/index.php?topic=113352.0
The Crew - Launch Trailer
PC configuration:
CPU: Intel i5-4670K
RAM: Avexir DDR3-1600 8G*2
VGA: MSI GTX960 GAMING 2G
SSD: Kingston HyberX 3K SSD 240G
CPU Cooler: SilverStone AR01
The MSI Z97 Gaming 5 motherboard box
Overview of the motherboard: Black and Red color scheme, it’s also the favorite color combination from MSI’s user reservation.
The PCI-E slots and bandwidth are enough for a two-way SLI setting.
Killer Ethernet, outstanding performance on internet access, especially reduce the lag issue.
The new arrival MSI GTX960 GAMING 2G graphics card
New cooling design: ZeroFrozr
The dragon symbol on LED panel
With MSI Gaming series motherboard plus graphics card, you can enable a Gaming App to overclock CPU and GPU. There are 3 modes to choose.
6-month free trail of the XSplit game caster software, free bundled with MSI gaming motherboard and graphics card
Done with assembling, quiet nice color combination and clean cable arrangement.
An overview of the very gaming look system.
Some benchmark results before racing with The Crew.
CPU and GPU info on CPU-Z and GPU-Z applications:
3DMark Fire Strike score: 6441
3DMark Fire Strike Extreme score: 3384
3DMark Fire Strike Ultra score:1262
The excel performance proof the brand new 960 graphics card comes with good a high Cost/Performance Value.
Now, check out this test benchmark score of the renowned game “The Crew”.
The game presents an ultra-quality display, 60 Frames Per Second (FPS)
FPS: Average frames is at:
Frames: 3859 - Time: 76828ms - Avg: 50.229 - Min: 43 - Max: 56
The comments of the game for your reference:
There are many types of missions that can be chosen from the America’s map.
Street racing, high-speed collision, breakaway from police, sky jumps, zigzagging, etc… make the game quite dynamic.
Now, when it comes to multi-player matches, the performance has exceeded expectations. Perhaps, it is the killer Ethernet that’s working the magic. Thus, this game is highly recommended if you have the right rig.
The downside is that the display intricacy is not as refined as GTA V and in addition, the game FPS is limited at 60 FPS. However, the overall gaming flow and performance is better than good.
The user's comment for using MSI Gaming 5 motherboard and 960 graphics card:
(The following commends are translated from user’s article, does not represent the viewpoint of MSI) ^^
Recently, MSI GTX 960 just launched so the initial price tag is still adjustable.
According to the current product line, it seems like this GPU is going to replace 750Ti. So once all the stocks (750Ti) at the store empties, we are most likely to see a price drop on GTX960.
Once the price hits the sweet spot, it’s time to try out GTX960 SLI’s performance.
The CP value on MSI GTX960 and GAMING 5 MB is pretty high. But the XSplit software that comes with the product is a bit annoying since the authentication steps are divided into 2 parts to go through for using it.
Enough said, anyways, GAME ON!

NVIDIA 960 card + GAMING 5 motherboard = best bundle for budget gaming!
it would be nice to see more testing of hardware-demanding games!

We have many mappings, which one is good in performance wise ?

We have many mappings, which one is good in performance wise ?

HI
Different Mapping Techniques are available in XI. They are: Message Mapping, XSLT Mapping, Java Mapping and ABAP mapping.
u2022The integration repository includes a graphical mapping editor. It includes built-in functions for value transformations and queue and context handling. There is an interface for writing user-defined functions (java) as well.
u2022XSLT mappings can be imported into the Integration Repository; java methods can be called from within the XSLT style sheet. Advantages of this mapping are: open standard, portable, extensible via Java user-defined functions.
u2022If the transformation is very complex, it may be easiest to leverage the power of Java for mapping.
u2022ABAP mapping programs can also be written to transform the message structures.
Message Mapping
SAP XI provides a graphical mapping tool that generates a java mapping program to be called at run time.
u2022Graphically define mapping rules between source and target message types.
u2022Queue-based model allows for handling of extremely large documents.
u2022Drag-and-drop.
u2022Generates internal Java Code.
u2022Built-in and user-defined functions (in Java)
u2022Integrated testing tool.
u2022N:M mapping is possible.
JAVA MAPPING:
Usually Java mapping is preferred when the target structure is relatively complex and the transformation cannot be accomplished by simple graphical mapping.
For e.g. consider a simple File->IDoc scenarion where the source file is a simple XML file, whereas the target file is an IDoc with more than one hierarchy level e.g FINSTA01. Content conversion in XI can only create a single level hierarchy, so in this scenario a Java mapping would come in handy.
See these:
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/thorsten.nordholmsbirk/blog/2006/08/10/using-jaxp-to-both-parse-and-emit-xml-in-xi-java-mapping-programs
When to use Java mapping
1) Java mapping are used when graphical mapping cannot help you.
Advantages of Java Mapping
1)you can use Java APIs and Classes in it.
2) file look up or a DB lookup is possible
3) DOM is easier to use with lots of classes to help you create nodes and elements.
Java mapping can be used when you have complex mapping structures.
ABAP MAPPING:
ABAP mappings are mapping programs in ABAP objects that customers can implement using the ABAP Workbench.
An ABAP mapping comprises an ABAP class that implements the interface IF_MAPPING in the package SAI_MAPPING. The interface has a method EXECUTE with the some signature.
Applications can decide themselves in the method EXECUTE how to import and change the source XML document. If you want to use the XSLT processor of SAP Web AS, you can use the ABAP Workbench to develop a stylesheet directly rather than using ABAP mappings.
In ABAP mapping you can read access message header fields. To do this, an object of type IF_MAPPING_PARAM is transferred to the EXECUTE method. The interface has constants for the names of the available parameters and a method GET, which returns the respective value for the parameter name. The constants are the same as in Java mappings, although the constant MAPPING_TRACE does not exist for ABAP mappings. Instead, the trace object is transferred directly using the parameter TRACE of the method IF_MAPPING~EXECUTE.
For more details refer
http://help.sap.com/saphelp_nw70/helpdata/EN/ba/e18b1a0fc14f1faf884ae50cece51b/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
ABAP Mapping
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Re: Performance of mappings (JAVA, XSLT, ABAP)
XSLT Mapping
XSLT stands for EXtensible Stylesheet Language Transformations. It is an XML based language for transforming XML documents into any other formats suitable for browser to display, on the basis of set of well-defined rules.
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
The above menotined are the mapping present in the XI.
When it is critical and complicate we go for the ABAP,JAVA or XSLt mapping. For simple Mapping we go for the graphical mapping.
the selection of mapping also depends upon the requirement and alos on our scenario.
cheers

Looking for a good TV Tuner card.

Hello all,
I'm looking into getting a good TV tuner card that will work for cable and satellite (if possible). I have Rogers cable and a unused Starchoice Satellite dish that I might use down the road.
I don't really know anything about TV tuners, so, I would appreciate a few suggestions on which will work good with my rig and cable or satellite.
Or do you guys think I should go for the ATI All-In-Wonder graphics card? I do play games like FEAR, Quake3, Dark age of camelot, etc...
Or stick with the geforce 7800 GT + TV tuner option?
Thanks for any advise you can give me
Alex

as you've posted in the MSI TV tuner forum, we're only going to give advice on MSI products here
personally, i'd always stick with a seperate VGA card and TV card solution
if you're looking for a good analogue capture card, and picture quality is important, then maybe a hardware MPEG2 capture card, such as the MSI Theater 550PRO-E is the best choice for you
as your board has PCI-E 1x slots, this is an even better choice, as PCI cards can sometimes encounter lack of resources on newer PCI-E boards, especially SLI boards

[VIA] MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card

Does any body out there know if a MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card will work well together?

like the grayone say, is true. for more ensure, try and search the graphic cards support list for your board at MSI (Sorry cause i don,t no is where the site located)
in my opinion, most is compability for your card, when is a AGP slot.
Except the new one like the AGP slot, call AGR( Accelaration Graphic Riser slot) that really need to find a compatibility graphic cards.....

Is there a way that i can downgrade my iOS 7.1 on my iPhone 4 to iOS 6xx? battery life not good, and performance isn't better than iOS 6.. Please apple i am really disappointed with iOS 7 on my iPhone 4

Is there a way that i can downgrade my iOS 7.1 on my iPhone 4 to iOS 6xx? battery life not good, and performance isn't better than iOS 6.. Please apple i am really disappointed with iOS 7 on my iPhone 4, it can runs great on iPhone above 4 such as 5/5s/etc.. iPhone 4 just good with iOS 6...

No.

Field 'Goods Receipt / Performance of Service' in 'Related Documents' Tab of PO Item in SRM

Hi Gurus,
I have a requirement where I need to make 'Goods Receipt / Performance of Service' in 'Related Documents' Tab as non-editable based on certain fields on the PO Item.
On searching SDN, I found that this can be done via SPRO in the below path SPRO->SRM Server->Cross application basic settings->Extension and field Control -> Configure field control -> configure control for fields at item level.
But here in this I am finding difficulty on using the Dyn. Customer Class and method.
Please help us on how to find the relevant standard CLass and Method.
I am new to SRM Programming.
Appreciate your inputs on this.

Hello,
have a look at SPRO:
SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Extensions and Field Control (Personalization) > Configure Field Control > Display Standard Metadata Tables for Item Fields > Display Delivered Metadata Table for Item Fields.
Here, for object type BUS2201, you can see standard dynamic control class name is /SAPSRM/CL_PDO_DYN_MDF_IT_PO.
You need to do your own field control configuration using specific class and method based on the standard one seen above.
Then, assign this class/method:
SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Extensions and Field Control (Personalization) > Configure Field Control > Configure Control for Fields on Item Level > Metadata for Fields on Item Level.
Regards.
Laurent.

Delivery and Goods Receipt without goods value

Hi!
this is my first post in this forum, hi everybody
Now the question:
My goal: warehouse manager shouldn't see goods value (prices) of purchased material and final products (sold goods).
That means I would like to remove all value data (Unit Price, Discount%, Total etc.) from the documents Delivery and Goods Receipt. Is it possible? The values should be then added by accountancy (any kind of connection between warehouse documents and journal entry?).
Is it possible to split the value data from quantity data (SAP BO 2007A)?
Thank you for any suggestion!
Aleksandra

You may try form setting to hide all those columns for this user.
Thanks,
Gordon

K7N420 pro MSI 6952 TV-Out Riser Card troubles

just wondering if anyone has gotten the MSI 6952 TV-Out Riser Card to go with their K7N420 pro motherboard and if so how do you get it to work as ive tried for months on end and i still have many failed attempts at getting it to function

It is your drivers. You need to get the 29.XX series of detonator drivers and use those to get tv-out to function.
I had a K7N420 and a tv-out card... long dead, exploded caps. I recall that the last version of the detonators that worked for sure was the 29.20s. I experience the same difficulty with my geforce3 Ti500 and the new drivers... no tv-out signal as the drivers cannot seem to detect the presence of a tv on the other end of the svideo cable.
Try it out and see if it works

Need a good AGP graphics card

I need to find a good AGP graphisc card to use with Motion 3 but AGP Graphics cards seem to be hard to find. I could use some suggestions.

eBay? I have an Apple nVidia 6800 Ultra that I keep meaning to put on eBay - email me if you want to know when I do...
Other than that, you can check OWC - http://eshop.macsales.com/shop/video/hardware/ - they've got the x800 in stock right now...
Patrick
P.S. welcome to the discussions

Sound Blaster Live! Value Sound Card Driver for

Hi, I have an older sound card that I purchased in 200: Sound Blaster Li've! Value Sound Card. The website doesn't seem to have the driver for this specific model. I'm looking for an Windows XP driver. Can anyone direct me to the right place to download this?

http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=24&y=3
They really should make the "Search archi'ves" link on this page,
http://us.creative.com/support/downloads/welcome.asp?action=next
bright red and about six inches high.

REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance!

Quote from: Nichrome on 07-May-15, 04:01:10
Hi
Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
Thanks! S/N: 602-V316-09SB1410116XXX

What is good for performance calculation in select st. or in formual column

Dear Friends,
I would like to ask you regarding what is good for performance specially i'm developing reports for EBS .
is it better to calcualte total of 5 columns in select statment directly or using formula columns to do this,
Regards & Thanks
Yas

I'd focus on easily readable query, namely use formula column if otherwise the query get too long or too complicated to read/maintain. Have inherited many ugly long queries/reports and hate to maintain or fix bugs for them etc.

Family and Friends International, good value?

How can you tell if paying for Family & Friends is good value? The numbers are not listed as they are updated automatically (trust us). The itemised bill detail doesn't show the full and discounted cost so have no idea if it's worth it. Seems the only way is to cancel it and see the effect on my bill in 3 months. Unless you know something I don't.

Have a look at pages 19-21 here. You'd probably do better with an access number service, with calls from 1p a minute including mobiles.
You can click the white star next to this message if you think it was helpful.

Is c6 good in performance?

plz guys..save my precious time..i have been waiting for c6 for past 3-4 months and nw its out in nokia priority..ppl in priority say that its d best phone having all d features of n97 mini at a less affordable price..after reading all the discussions on c6 here im in a confused state whether to take it r not..is c6 good in performance??...or should i go for x6 or 5800.....my mind still gng for c6 even though after reading that its been hanging a lot....plz rpl me which phone is of d best of d following-5800 or c6 or x6...im gng to purchase any one of d above...and be frank with ur replies as i didnt buy any phone yet...and plz nokia ppl reply truely for this post....

Among the three of them, I will let out the 5800.
Surely it is very good and stable, but the X6 has the same features and, apart from the date bug (which they say will be corrected in next firmware) is more reactive because of the capacitive screen and has a very good camera (and also a better design, in my opinion).
I have both and I feel the X6 better for reactivity and look. If it wasn't for the date bug (again, they should correct in next firmware, just hope it comes soon) would be perfect.
I don't know how the C6 is, but I think it's like an X6 with a keyboard and a resistive touch (so a bit less reactive, but since I don't have one I can't be sure). The specs are the same so, if you don't mind about the keyboard, it's just a matter of which looks better to you.
Or you can go for the C6-01 which is being released these days and should be a little smaller (but with same screen size) and have much better performance.

MSI R5570. Good Value Performing Card

Similar Messages

Maybe you are looking for