MSI R5770 Hawk is out and Here it is!!!

Guess what has dropped by on my doorstep. A HAWK series 5770 video card. With the successful high-end LIGHTNING series that MSI offered before, they now produced this mainstream product line.
This video card is custom build with MSI’s Military Class Components, Twin Frozr II cooler , MSI’s own custom PCB Design with Voltage checkpoints for GPU and memory.
As you flip up the box front cover. You will see a short descriptions of the R5770 Hawk’s features and the actual item below.
The bundle includes: VGA to DVI adapter, Afterburner and VC Driver CD, Crossfire cable, 6pin to 4pin molex converter, manuals and the voltage checkpoints connector
See the rear, crossfire & PCIE slot covers?
Below is my system configuration:
•   Processor: Intel i7 920 @ 4.0ghz (C0 Stepping)
•   Motherboard: MSI X58 Pro Motherboard
•   Mems: 3x2GB Kingston DDR3 1333mhz
•   Harddisk: WD Raptor
•   PSU: AcBel M8 670watts
•   OS & Tools: Windows 7 32bit, ATI Catalyst 9.12, MSI Afterburner 1.50, CPU-Z, GPU-Z & 3dMark06
Below was the result of all stock settings
Lastly for an overclocked Processor & Video Card

Official site http://www.futuremark.com:80/community/competitions/msilightning/

Similar Messages

Questions about my MSI R5770 Hawk Radeon HD 5770 and my Dell Studio 7100

Ok, I have had this card installed for about a year now. From the beginning Catalyst Control Center had given me error messages, "Catalyst Control Centre: Host application has stopped working. Windows is checking for solutions" every time I start the machine or every time I try to use the Catalyst Control Center. This has not been a problem because I have been using a 2 monitor system using the DVI port from on and the HDMI to Display Port adapter to the second larger monitor (if I went straight HDMI I can't change the settings and I end up with a 1 inch black border around the desktop and the outer edge of the 23" monitor,) so I just worked around with the HDMI to DVI. Well now I am trying to hook up three monitors. One to the Display port through a Displayport to DVI, one to the HDMI through the HDMI to DVI and one to the Display port. No matter what I try to do through the Windows display control panel, I can not get the displayport monitor (which ever is hook to that port) to display. Windows 7 does detect all three monitors, but it will not allow me to "extend the desktop" to the third monitor and I still can't get the Catalyst Control Center to work.
I have uninstalled all files from ATI or AMD that involve the video and reinstalled the latest drivers and software, but the Catalyst Control center still is not running.
If you could help me with this it would be great. I am a graphics designer and web designer/developer and not a hardware or software tech and I have been googling and trying different possible answers since yesterday morning.
My graphics card is
MSI R5770 Hawk Radeon HD 5770
My computer is
Dell Studio XPS 7100, AMD Athlon IIX4 630 Processor 2.80 GHz
8 gb
64-bit operating system
I am attempting to hook up a LG W2361 to the HDMI through HDMI to DVI adapter (presently working) at 1920 x 1080
an LG W1952 (at 1440 x 900) through the DVI port to DVI (presently working) and
an old Samsung SyncMaster 170t to the Displayport through a the adapter (not working) monitor is detected but it will not allow the extend desktop to be applied.
Hope someone can help, thanks in advance for just reading all of this.

Just incase anyone runs into a similar problem. I figured it out.
Somehow in one of either the ATI driver updates or in a Microsoft update, my drivers and software was contaminated. I deleted all software and drivers for the card, which I had already tried several times. But this time I went into safe mode used CCcleaner in safe mode and cleared the register of all entries. I then reloaded and the Catalyst Control center and it works fine now.
The problem with the three monitors seems to be that the one hooked to the displayport, if you are using more than 2 monitors, must be hooked to an active displayport adapter. I was using a passive adapter. So either I need to buy a very expensive adapter or.....maybe a new monitor that uses displayport.
Hopefully this will help someone else having this issue.

Installed MSI R5770 Hawk but PC says: HD 3200

Hello to all. I just purchased and installed A MSI R5770 HAWK video card. I installed all the software and everything looks good, but after I finnished the install through the ATI Catalyst manager, I clicked on "View log" and it said: Hardware info= ATI Radeon HD 3200 Graphics
Did I do something wrong? I believe that the HD3200 is the on-board graphics(maybe). What should I do to get the most out of this GPU?? I do have monitor hooked up threw the HDMI on the card and I have good pic., I just thought that the Hardware should say: "ATI HD5770 " shouldn't it?
By the way I did search the forms before I posted, just in case you notice that this is my first post. Many Thanks, >>>>RiZ<<<<<

Yes, the HD3200 is integrated and not related to MSI R5770 HAWK
So the 5770 is not detected by the system or?
Have you checked in device manager? Is it listed there?
Check with also with AIDA64 At Display, GPU page:
http://www.aida64.com:8081/aida64extreme150.exe
Read >>Posting Guide<<

Getting audio through HDMI on MSi 5770 Hawk

Hey all,
I just built a new system using the ASUS P6X58D Premium motherboard and I have two MSi r5770 Hawk graphics cards CrossFire'd. I've got my monitor plugged into the DVI port and also an HDMI cable from the HDMI port to my surround sound system (and to TV). I'm not getting any audio out of the HDMI (not surprising). I'm reasonably sure I need a SPDIF cable from the graphics card to the motherboard.
So I think the graphics card came with two of these weird looking SPDIF cables that just have the connector to the graphics card and these two weird socket cables. There are two problems with this: For the two weird socket things, I don't see anyplace on the motherboard for it to go. Second, the cables are literally like two inches long, so there's no way it is going to reach the motherboard even if it were the right cable.
So I guess what I'm wondering is if anyone can tell me what cable I need to go from the SPDIF connector on the P6X58D Premium mobo to the MSI r5770 Hawk graphics card. Or do I have the wrong idea?
Thanks!

Are you describing the MOLEX to 6 pin power adapters and not S/PDIF cable? S/PDIF cable is about 130mm (12 in.) long 2 wire cable and are only supplied from MSI with NVIDIA VGA cards. ATI should have internal S/PDIF and I don't think they need the cable.

MSI N460GTX Hawk (1GB) Overclocking Results

I've had very good results with overclocking my N460GTX Hawk video card.
For the past 6 months I've been documenting my overclocking results and had success with using additional cooling solutions to decrease the PCB and VRM temperatures.
Check out MSI N460GTX Hawk (1GB) Overclocking and Cooling Results:
http://forums.tweaktown.com/video-cards/42319-msi-n460gtx-hawk-1gb-overclocking-results.html
As of today (July 4th) the thread has only 93 posts.
My new N460GTX Hawk Talon Attack card is arriving in a few days and I plan to use my N650SLI-DS4 motherboard with an overclocked SLI setup. I'm curious to see how well SLI performance scales with an "ancient" motherboard.

Quote from: by Unwinder developer of Afterburner to a similar Question in Afterburner support forum
That's supposed to be that way, you WILL NOT be able to monitor voltage changes with any software tool reading voltages via NVIDIA driver.
Hawk uses additional voltage controller chip which is adding programmable voltage offset to output voltage of reference NVIDIA voltage control circuit.
None of tools you've mentioned support that additional chip and just show you expected target voltage (which doesn't match real value in case of adding an offset via that additional chip).
Furthermore, that additional chip itself also doesn't support voltage readings, it doesn't even know which voltage is on its' input, it is rather simple IC which just trying to modify the input value by specified offset.
That is why there is no (and there will not be in future, I've seen rumors that I'm working on getting voltage monitoring working on Hawks and I say that's not true) voltage monitoring for Hawks when alternate voltage controller circuit is in use.
The best thing that can be done to see some form of expected voltage is approximating the output by displaying summ of NVIDIA reference voltage with additional offset, but that's by far not the best solution because both components (reference circuit and additional offset circuit) add its own inaccuracy.
original here -> http://forums.guru3d.com/showpost.php?p=3749461&postcount=78
Could try a Multimeter.

UVD-power summary of MSI 5770 Hawk, 5570, & 785GTM-E45; Hawk min voltage

MSI R5770 Hawk
MSI R5570-MD1G
MSI 785GTM-E45
GPU PWR SYS f_GPU f_VRAM V_GPU set V_GPU meas Note 1: freq & voltage Note 2: system state
DCW Mhz Mhz V V
785 35 197 400 idle stock idle, light (5 min max)
785 46 498 400 UVD stock 1x 720p sharpen complex 2
5570 43 157 200 0.9 idle stock idle, light (5 min max)
5570 54 400 800 1 UVD stock 1x 720p sharpen complex 2
5570 52 400 800 0.9 0.8987 UVD undervolt/underclock 1 1x 720p sharpen complex 2
5570 55 400 800 0.9 0.9001 UVD undervolt/underclock 1 1x 1080p sharpen complex 2
5770 53 157 300 0.95 0.956 idle stock idle, light (5 min max)
5770 58 157 600 0.95 0.957 idle 2x f_VRAM idle, light (5 min max)
5770 65 157 1200 0.95 0.957 idle 4x f_VRAM (nom. max) idle, light (5 min max)
5770 61 400 900 0.95 0.958 idle @ UVD stock idle, light (5 min max)
5770 72 400 900 0.95 0.9499 UVD stock 1x 720p sharpen complex 2
5770 75 400 900 0.95 0.9508 UVD stock 1x 1080p sharpen complex 2
5770 60 157 300 0.95 0.9498 UVD undervolt/underclock 1 1x 720p sharpen complex 2
5770 63 157 300 0.95 0.9503 UVD undervolt/underclock 1 1x 1080p sharpen complex 2
5770 61 157 200 0.95 0.9497 UVD undervolt/underclock 2 1x 720p sharpen complex 2
5770 61 157 200 0.95 0.9497 UVD undervolt/underclock 2 1x 1080p sharpen complex 2
AMD Power Play states are glitchy, and not all videos detect and run with DirectX Video Acceleration. So max power during playback can end up on the highest power state which is not shown above.
MSI R5770 Hawk minimum power
The uP6204 power controller used on the MSI R5770 Hawk design nominally supports 0.5625 to 1.3500V in 0.0125V steps.
With a stock video BIOS, MSI Afterburner 1.50/1.51 allows the MSI R5770 Hawk to be soft-modded from 1.000 to 1.350V in the roughly 0.0125V steps.
The video BIOS can be set as low as 0.950V but with no steps between 0.950 and 1.000V.
MSI Afterburner 1.60 beta 4 or earlier adds the AllowCaptureVoltageDefaults profile setting. Acquiring, then changing the default GPU voltage allows "resetting" the Hawk to 0.950V in Afterburner for the highest frequency state. This allows maintaining Power Play transitions and running the max frequency at 0.950V, where Afterburner by itself is limited to 1.000V.
The max frequency state of the Hawk is 875 MHz 1200 MHz 1.200V. To have the most flexibilty on control the Hawk, lowest power in the Desktop/HTPC/light gaming, and the ability to manually overvolt/overclock for specific games: run the Hawk at 0.950V in the max frequency state.
How-to work around Afterburner and the Hawk design to run 1.000V in the max frequency state. *
1) in the video BIOS, leave the voltage as 1.200V in the BIOS--which is required for Afterburner to change the Hawk voltages in Windows
2) in the video BIOS, change the GPU frequency of that state to something less than or equal to the maximum stable frequency at 1.000V
3) in Afterburner, Reset to default settings **
4) in Afterburner, change "Core Voltage" to 1.000V
5) in Afterburner, Apply
6) in Afterburner, Save to Profile 1
7) in Afterburner, \Settings\Profiles\2D Profile\ & "3D Profile" choose "Profile 1" ***
8) on each Windows startup, run Afterburner
How-to work around Afterburner and the Hawk design to run 0.950V in the max frequency state.*
1) in the video BIOS, leave the voltage as 1.200V in the BIOS--which is required for Afterburner to change the Hawk voltages in Windows
2) in the video BIOS, change the GPU frequency of that state to something less than or equal to the maximum stable frequency at 0.950V
3) in Afterburner, confirm the voltage default setting for 0.950V--capture voltage defaults as needed using AllowCaptureVoltageDefaults mentioned above
4) in notepad as an Administrator (Win 6.x), change the Hawk's profile configuration file to 0.950V
example:
[Settings]
uP6204_Defaults=D7 20
5) in Afterburner, Reset to default settings **
6) in Afterburner, change "Core Voltage" to 1.000V--changing the profile setting to 0950/950 is not useful as of 1.60 beta 4.
7) in Afterburner, Apply
8) in Afterburner, Save to Profile 1
9) in Afterburner, \Settings\Profiles\2D Profile\ & "3D Profile" choose "Profile 1" ***
10) on each Windows startup, run Afterburner
11) in Afterburner, "Reset" to re-enable 0.950V.
* UnlockVoltageControl in the primary Afterburner profile's [Settings] will likely be needed.
** Only default profiles support Power Play states correctly.
*** Having a non-"default" profile in 3D results in the "3D Profile" activating instead of the UVD in the BIOS.
MSI Afterburner, default voltages
Profile Idle V_GPU @ V_CORE (V)
D7 12 1.125
D7 14 1.100
D7 16 1.047
D7 18 1.049
D7 19 1.037
D7 20 0.949
D7 21 0.937
D7 22 0.925
D7 23 0.912
D7 24 0.899
Power Play states in RBE 1.25
0 Boot 00 -> 00 -> 00
1 Power saving 01 -> 02 -> 00
2 UVD 03 -> 03 -> 03
3 Power saving 04 -> 02 -> 00
4 ACPI 01 -> 01 -> 01
Stock clocks & V_GPU
Clock info 00 01 02 03 04
f_GPU 875 157 600 400 400
f_RAM 1200 300 1200 900 1200
V_GPU 1.20 0.95 1.00 0.95 0.95
My current and likely final settings for MSI R5770 Hawk:
MOD clocks & V_GPU
Clock info 00 01 02 03 04
f_GPU 714 157 600 157 400
f_RAM 1200 300 600 300 600
V_GPU 1.20 0.95 0.95 0.95 0.95
Afterburner Profiles
# CoreVoltage CoreClk MemClk
1 0950 714000 1200000
2 1000 785000 1200000
3 1125 902000 1200000
5 1200 951000 1200000
More data & full system config:
http://forums.techpowerup.com/showpost.php?p=1858205&postcount=1

Help! R5770 Hawk - No display from wake-up

No display from wake-up (Fans, lights are on, HDD spinning...). Latest ATI CCC 11.3 installed. To get displaying on monitor, I have to long press power button to shutdown (?), then press power button to restart (?). However, Win 7 stated "Resuming windows" ...
Any idea? Thanks for your helps.
My system:
MB: ASUS P8P67 PRO (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
GPU: MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
PSU: CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Display: HP 2511x using HP supplied DVI cable.
OS: Win 7 Pro 64

Ask Asus support, this is mainboard related

MSI R6870 Hawk (p) Fans stopped spinning

Hi there
i Have a MSI R6870 Hawk graphics card and havent really had any trouble until two days ago, when i noticed my fans had stopped.
I do have MSI Afterburner and the newest driver (and tried to reinstall both)
i've had a look at the card and tried fiddling with the fans without any luck.
Sometimes they move a littlebit and yesterday i got them to run for a couple of hours (without actually doing anything as far as i know)
do you know what i should do to make them run proper again?
br Bugge

Looks like they died what can happen. If still under warranty rma the card to fix that or use an aftermarket cooler like Accelero Twin Turbo II

R5770 Hawk and Win7 aero effects

Just purchased used R5770 Hawk and after installing latest drivers and catalyst panel have lost Windows7 Aero glass effects.
Replaced the card w/my previous (Nvidia 9800GT) and Aero re-appeared. Reinstalled the 5770 and don't seem to be able to get Aero.
Searched and searched and it looks like I might be the only person to experience this.
Can anyone help? Is it a setting?

Use >>Driver Fusion<< in Safe Mode to remove current VGA drivers.
Then install latest drivers from MSI: http://www.msi.com/product/vga/R5770-Hawk.html#/?div=Driver&os=Win7%2064
Try again

SOS HELP!! MSI 7850 hawk 1Gb ORIGIN ROM AND UEFI ROM

Hi boss,i have a card MSI 7850 hawk 1Gb,but when i flash the rom you give to this man in post"forum-en.msi.com/index.php?topic=167409.0",my screen go to black ,it seems i flash the wrong rom and the wrost is i didn' backup the old rom, i checked and find out my card need 1C1.rom,not 1E1.rom,could you please send me a copy of 1C1 origin ROM and UEFI rom please? Or my vediocard was going to broken. THANKS A LOT :(

Quote from: candymanye on 06-February-14, 03:32:17
Yes i have VGA and can flash it back,all i need is an oringin ROM
MY card S/N is 602-V273-20SC1307012945-366
NAME IS:R7850 HAWK 1G
PLEASE HELP ME IN HURRY I CANT FALL IN SLEEP :(
Good news,i have flashed a rom related by a post "https://www.dropbox.com/s/i53tzcobzmjh5k4/001.rom" and it works,it's the same bios i need ,now my card live again,but where can i find the UEFI ROM of my card?

My daughter who used to have an apple account and cancelled it is still having money taken out of her account.?

MY daughter who used to have an apple iTunes account and cancelled it is still getting money taken out of her account what do I do guys to sort this out and get her a refund.

If she logs into her account (an account can't be cancelled or deleted, you can only stop using it) on her computer's iTunes via the Store > View Account menu option, there should be a Purchase History section with a 'see all' link to the right of it - clicking on that should then display a list of her purchases. If she no longer has iTunes installed then she might be able to see recent purchases via this page : http://reportaproblem.apple.com
Did she have any auto-renewing subscriptions that she didn't stop ? There are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
Depending upon what the charged are, she can try contacting iTunes Support and see if they will refund or credit her : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have a iPhone 4s which belonged to a friend it was in her iTunes account she has iCloud account to I signed out of her iTunes account on this phone and signed into my iTunes account but now phone apps don't work like the phone not sycronized to min

If I got a iPhone off a friend it was connected to her iTunes an iCloud accounts I signed out of her iTunes and signed into my own but the phone don't seem to sycronized to my iTunes account an she has iCloud app an account on this phone but I don't help

Hey there jackofromgriffith,
I understand that you have an iPhone from your friend that is still associated with their iCloud account. You will need to disassociate the iPhone from your friend’s iCloud account in order to resolve your issues:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
https://support.apple.com/en-us/HT201441
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

My account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account

my account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account (and no, i dont have any rescue email address or whatsoever)
please help me because i dont to waste money for nothing

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

So I bought an iphone 4 from ebay and when I got it it was already signed into an icloud account. When I contacted the seller he said he would try to get the password but i haven't heard from him. How can I sign out of her icloud w/out the password

So I bought an iphone 4 from ebay and when I got it it was already signed into an icloud account. When I contacted the seller he said he would try to get the password but i haven't heard from him. How can I sign out of her icloud w/out having to have the last users password

Bmscotr5 wrote:
How can I sign out of her icloud w/out having to have the last users password
You cannot.
Removing a device from a previous owner’s account
Try and get a Refund.

My sister gave me her old Iphone 4 but and i logged out of her apple accounted and logged into mine but sadly whenever i try to update or download a app ot asks for my password then it ask for hers why is that ?

I basically got this phone about 2 weeks ago and i cannot download or update anything . I would mind it asking for my sisters apple password but she doesn't know it so how do i take it off ? It will ask for mine then a few seconds later it will ask for hers . In my settings everything is signed in as me but i just don't get why it still ask for her apple id. I have logged out and reset all my settings and it still ask for her apple id. If i can figure out how do i get her password ?

Any apps that she downloaded onto the device are tied to her apple ID. They cannot be transferred to another account. To update those apps, you would either need her password, or you could delete the apps and download them using your own apple id.

MSI R5770 Hawk is out and Here it is!!!

Similar Messages

Maybe you are looking for