MSI R6570 MDIGD3 Crossfire ready ?

Hello,
It's all in the title : I would like to know if my MSI R6570 MDIGD3 is ready for ATI Crossfire or not ?
My motherboard (Asus Rampage Formula) is ready for it but i don't know about my graphic card...
Thanks for your help

the R6570 is a basic adapter I would also suggest that you save up money and buy a better card like a R7770, R7870 or R7970 as what you have is a waste of time and money getting another for crossfire as the payback will be next to nothing and cause more problems. usually a single good card is much better then 2 lower ones as they scale poorly (I used to have 2 HD5770's (your R6570 is way worse then one of them 60% of the steam processors and half of everything else) in crossfire and my new single R7870 out performs both 5770's in crossfire all on its own also saved a good 80W of power draw in the process).
so get a single card like a R7770 and you will have compared to your current card 2 or 3x or more performance (crossfire with older cards is a waste of time and money - BEEN THERE DONE THAT).

Similar Messages

Request UEFI GOP VBIOS for MSI R6570-MD1GD3/LP

Hello
Request UEFI GOP VBIOS for MSI R6570-MD1GD3/LP
Current Bios Version 013.011.000.015.000000(113-C33107-MSI)
S/N : 602-V250-07SC1111041530
Thanks

there is no GOP vbios for this card, >>How to contact MSI.<<

MSI R5670 MDIGD3 Stutters!

Hi. I am looking for some help with my new MSI R5670 MDIGD3. I just installed it last Friday and I've been having some issues.
Basically, it stutters. Frequently. I have several movies on my pc, in various formats (mp4, mkv, avi, etc.). Using the VLC player, or Windows Media Player, i regularly have the screen freeze for 1-2 seconds while the sound stutters like ... well, its hard to describe. It stutters. This is happening every few minutes, and it's happening in multiple file formats in multiple players. I have my PC plugged right into my TV via an HDMI cable for movie watching, which is specifically why I purchased this card (I have a regular monitor setup as well via VGA of course, it happens on both). Anyway, system specs below, please please please if let me know if you have any idea why this is happening, i really don't want to return the card but after screwing with it all weekend i am at the end of my rope! Thanks in advance.
Computer:
Operating System Windows 7 Home Premium Home Edition
OS Service Pack Service Pack 1
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name DESKTOP-PC
User Name Van
Motherboard:
CPU Type Unknown, 1800 MHz (7 x 257)
Motherboard Name Unknown
Motherboard Chipset Unknown
System Memory 3264 MB
BIOS Type AMI (05/20/11)
Communication Port Communications Port (COM1)
Communication Port ECP Printer Port (LPT1)
Processor Properties:
Manufacturer Intel
Version Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz
Motherboard Properties:
Manufacturer ASRock
Product G31M-S.
Display:
Video Adapter ATI Radeon HD 5670
Video Adapter ATI Radeon HD 5670
Monitor S200HL(Analog) [NoDB] (LUG0R0262400)
Monitor Generic PnP Monitor [NoDB] (HPARAH4724007)
Multimedia:
Audio Adapter Creative Audigy LS Audio Processor
Audio Adapter High Definition Audio Controller [NoDB]
Storage:
IDE Controller Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
IDE Controller Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Disk Drive ST2000DL003-9VT166 ATA Device (1863 GB, IDE)
Disk Drive WDC WD3200AAKS-00V6A0 ATA Device (298 GB, IDE)
Optical Drive TSSTcorp CDDVDW SH-S203B ATA Device
SMART Hard Disks Status OK
Partitions:
C: (NTFS) 305234 MB (258529 MB free)
E: (NTFS) 1907718 MB (1646211 MB free)
Total Size 2161.1 GB (1860.1 GB free)
Input:
Keyboard Microsoft USB Natural Ergonomic Keyboard 4000 (IntelliType Pro)
Mouse HID-compliant mouse
Network:
Network Adapter D-Link DWA-552 XtremeN Desktop Adapter (192.168.0.100)
Memory Controller Properties:
Error Detection Method 64-bit ECC
Error Correction None
Supported Memory Interleave 1-Way
Current Memory Interleave 1-Way
Supported Memory Types DIMM, SDRAM
Supported Memory Voltages 3.3V
Maximum Memory Module Size 4096 MB
Memory Slots 2
This is what I think are the relevant parts of a report pulled by Everest.
I am not positive, but i think the PSU brand is "Power Up!". That's what it says on the side anyway,
ATX Switching Power Supply
400w max
AC Input 110/230V 3A/2.5A 50/60Hz
DC Output 400W Max
+5V===30A +3.3V===28A
12V=== 0.8A +12V===25A
+5Vsb===2A -5===0.3A
(+5V & 3.3V total output 230W)
I dont really know what any of that means... I

Processor: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz
Motherboard: ASRock G31M-GS R2.0 and the BIOS is
RAM: Corsair 4096MB PC6400 DDR2 800MHz Dual Channel Memory Upgrade - 2x2048MB
VGA: MSI R5670 MDIGD3 - (ATI Radeon HD 5670) 1024MB
Hard drives: the main one is a Western Digital Caviar Blue 320 GB Bulk/OEM Hard Drive 3.5 Inch, 16 MB Cache, 7200 RPM SATA II WD3200AAKS
and the second is a Seagate Barracuda Green 2TB SATA 6Gb/s 64MB Cache 3.5-Inch Internal Bare Drive ST2000DL003
Sound: Soundblaster Augidy
Network: DWA-552 XTREME N DESKTOP ADAPTER (for wireless, I do NOT have my internet wired into my PC)
OS: Windows 7 32 bit
PSU: PowerUp! (I think. That's what it says on the side, anyway. Though when I google the model number LP6100D it says Powmax!) 400w max, (3.3v/28a, 5v/30a, 12v/25a)
I hope that helps
So I noticed the stuttering again today, but when i was watching some video online! Usually I would just write that off as slow internet, but it was the exact same as when I watch regular video in Windows Media Player or VLC, a quick frozen frame while the sound stutters.
EDIT: And maybe i should point out that the videos are on the Seagate. Windows is installed on the WD.

MSI R6570-MD2GD3/LP- Three Monitors Won't Work

I just bought the following: MSI R6570-MD2GD3/LP
I installed the updated driver from the website and can get two monitors to work, but when I have all three plugged in, the DVI does not work. When I go to adjust the screen resolution in Windows 7, I can see the three monitors, but the one monitor has "Disconnect this display" chosen and when I choose "Extend desktop to this display" and then apply it says "unable to save display settings"
I have the following hardware:
GIGABYTE GA-Z68A-D3H-B3
Intel Core i5-2500K
Sunbeam PSU-H680
G.SKILL Ripjaws DDR3 SDRAM DDR3 1333
MSI R6570-MD2GD3/LP Radeon HD 6570
ASUS VH232H
Acer S231HL
Acer G235H
Please help, thank you

Have you checked this?
http://www.amd.com/us/products/technologies/amd-eyefinity-technology/how-to/Pages/how-to.aspx
Edit:
I see your card do not support AMD Eyefinity:
http://www.msi.com/product/vga/R6570-MD2GD3-LP.html#/?div=Overview

3dmv Quick Test on MSI R 5870 Crossfire ...

Just quick test on the new MSI R5870 .. crossfire set up at MSI Eclipse Plus...
--I made your image clickable.
To see how I did it, click the modify
button in this post.
--Mike

@frans............
I have been thinking about this BIOS thing also all the time today.......
u know....what...I just upgraded the BIOS not too long ago.....
I guess I have to revert back to the older BIOS.... and let u know how it is going to be.
Lots of other users out there have this similar problem as mine.... (from postings in tomshardware.com).
hope i can solve this....soon.
Thanks for the tips @frans2h

MSI Z77A-G45 Crossfire

I am planning to buy the MSI Z77A-G45 motherboard. Only i see the manual say:
Quote
Slots
■ 2x PCIe 3.0 x16 slots
- PCI_E1 supports up to PCIe 3.0 x16 speed - PCI_E3 supports up to PCIe 3.0 x8 speed
■ 2x PCIe 2.0 x1 slots
Can you tell me if this motherboard does fully support 16 lanes on both cards in Crossfire?

No, it can't. It will switch to X8/X8 if using Crossfire. Due to technical limitation Z77 can't go X16/X16

MSI p45neo2-2FR crossfire problem

I cant make it run crossfire
I enabled in catalyst,installed everything but in GPUz said Crossfire Disabled(Crossfire available)
And when i run 3Dmark06,the VPUrecover jump up.
I run this system on DFI p45T2RS with the same setting and it run smoothly.
My specs:
CPu Q6600@3ghz
RAM 2x2gb bus 800
VGA 2xMSI4770
PSU OCZ gamestream 600w
1hdd,1DVD

Hi,
can you provide a little more information about your system configuration?
Quote
VGA 2xMSI4770
Can you take a look at the current BIOS Version of both cards? Use GPU-Z to check the version ID of each 4770 card and post the info here.
About your Mainboard:
--> You have this one, right [MS-7558]?
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=1623
What BIOS Version are you currently using? (Look in BIOS Setup under "Standard CMOS Features" -> "System Information" to check the BIOS Version.
And last but not least:
--> What operating system are you using exactly? Have you put on a fresh installation of the OS for this system configuration?

MOVED: MSI Z77A-G43 crossfire?

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=160303.0

I have the same question...? Do you mean 'dual' Crossfire as in 4 Videocards.. or 2 Videocards in PCI_E2 & PCI_E4?
The answer is... this board can run 2 cards in Crossfire. In E2 & E4 as explained in the owners manual.
You can not use the other slots for CrossFire.
Tell your Clan Mate..that All are welcome here, and not to think any question is unable to be asked. We were All newbee's at one point in time.. and a lot of us still are not experts. We just like to help and be helped.
Plus if the posting guide is read, it will be learned that going to 'Profile' and listing the PCs equipment will give us better information about the PC, to be able to help better.
Welcome, Good Luck

MSI Z77A-G43 crossfire?

i got a quick 1
can the MSI Z77A-G43 run dual crossfire yes or no?
can't find a soilid answer on the main website saying yes or no but looking at the express slots i think
just don't want to make a mistake.
i'm doing some searching for a clan mate not to well known in pc building.

I have the same question...? Do you mean 'dual' Crossfire as in 4 Videocards.. or 2 Videocards in PCI_E2 & PCI_E4?
The answer is... this board can run 2 cards in Crossfire. In E2 & E4 as explained in the owners manual.
You can not use the other slots for CrossFire.
Tell your Clan Mate..that All are welcome here, and not to think any question is unable to be asked. We were All newbee's at one point in time.. and a lot of us still are not experts. We just like to help and be helped.
Plus if the posting guide is read, it will be learned that going to 'Profile' and listing the PCs equipment will give us better information about the PC, to be able to help better.
Welcome, Good Luck

Msi R6570 dual screen setup

hi there,
maybe someone can help me... I currently own a msi radeon r6570 video card and on the rear output I ave a d-sub which I'm using for my initial display, the second is a dvi connecter which I have a dvi to d-sub adaptor for and an hdmi connector, now I'm wondering if I could get some help to set up a dual monitor on my card using the d-sub connector and the dvi port please.. I will be grateful for this help as I really could use dual screens to do my project work with.
thank you in advance and will await any help or advice available

NO... a DVI to VGA cable only takes the analogue pins (Only if it has a inline converter would that work) that are there and uses them but there being used by the VGA port that your direct D-Sub connection is utilizing so it will not work (it will be the same as a DVI-VGA adapter plug like you have already tried) you need a converter for a second analogue connection (VGA 15pin D-Sub) that can convert the digital signal to the needed VGA signal for your VGA monitor as the card has no unused Analogue lines...
that is the only way you can use 2 VGA (15pin D-Sub) connections as the card was not designed for 2 of them (like I said before it has 1 set of analogue connections (VGA 15pin D-Sub) and 2 digital 20-24pin digital lines so you need to convert a digital to analogue via a external circuit or your stuck with your other monitor being unusable)...

MSI 890FXA-GD70 Crossfire Problems

hi, im new to crossfire and my cousin just gave me his old msi r4770 cyclone..
im wondering why i cant run both cards at full x16 bandwidth..
one is running at PCIE 2.0 @ x16 and another one at PCIE 1.1 @ x8
and why does the other one say PCIE 1.1 and not 2.0?..
i used PCIE_1 and PCIE_5 as the manual says..
here are the screenshots:

glad i could help you get it working! that is a common problem with dust and dabris getting into the unused connectors on motherboards leading to connection problems between cards and motherboard!
in future if that ever happens again try the clean and reseat as that is the most common problem!

Why msi 648 max HT ready cannot be OC

?( The problem is :
The bios has an option in the frequency/voltage control menu called
AGP/PCI Frequency (MHz)
which gives me the ability to adjust the pci/agp bus clock frequency.
This option doesn't work, and my clue is
1- When I adjust my CPU FSB more than 110 MHz (PCI > 36.66 MHZ) and this
option to 66/33 the computer boots normally until it starts loading the O.S.
and errors saying that the OS cannot start due to lost system files, or Read
Write error to Aux device, or it hangs.
2- When I adjust this option to 80/40 and the CPU FSB to Auto (100 MHz), the
computer boots normally and load the O.S. normally and everything goes just
fine. and Sandra software reports the PCI clock frequency as 33 MHz.
Thats to say that the PCI/CPU FSB ratio is fixed at 1/3 regardless to any value selected in this option.
My system is:
Msi 648 MAX ver1.1 HT ready
Intel P4 2.4Ghz 512KB bus 100 Mhz
Msi MX440SE-T AGP 64MB DDR
WD 80GB 7200 HDD
Samsung 52-24-52 CD-RW
Creative modem blaster v.90 di5655
P.S. Logic 300W
Win 98SE & WinXp
?(

648 Max HT Ready CPU Support Status

MSI Hawk HD5770 Crossfire voltage/overclocking problems.

Hi everyone. This is my first post ever on a technical forum.
I've been playing around with the MSI Hawk 5770 video cards recently and I have some questions/concerns. I am running the new Catalyst 10.4 drivers without CCC installed and overclocking using MSI Afterburner. I have voltage altering unlocked (I think: Unlock voltage control checked in the properties and changed in the .cfg file) and have been able to overclock the cards to 950/1250 on stock voltages. I run Kombuster to test stability and I'm wondering, does GPU-Z read voltages correctly for these cards? No matter what I set the voltage to, GPU-Z reads 1.000v in the sensor tab.
I've been unable to break 1290MHz memory clock speeds and I'm not sure if it's because the cards I have just can't go higher or if the voltages aren't changing appropriately. When I set the memory clock to 1300 or higher, my system will freeze/hang (not crash mind you) within 5 seconds to 3 minutes of running Kombuster.
Thoughts?
Thanks in advance.

Clarification: When the freezes/hangs happen, there is not a temperature problem. Haven't seen temps above 72C during stress tests and nothing over ~70C before a freeze/hang.

Is the MacPro Crossfire ready ?

I was wondering since we get the good looking X1900 XT wether crossfire configuration would be feasable... i know this the ATI 1900 XT is a GREAT card and will perform greatly but i was wondering wether this would be feasable would this be the case the graphics shall be screaming...
If you have the capacity of such as setup i would be very interested into seeing the benchmark results and see wether any improvements would hop along the way.
Yours sincerly,

CINEBENCH 9.5
Tester : Bertrand STERN
Processor : Xeon 4
MHz : 3000
Number of CPUs : 4
Operating System : Mac os X server 10.4.7
Graphics Card : Ati X1900XT * 2
Resolution : 2560*1600
Color Depth : Millions
Rendering (Single CPU): 494 CB-CPU
Rendering (Multiple CPU): 1564 CB-CPU
Multiprocessor Speedup: 3.17
Shading (CINEMA 4D) : 590 CB-GFX
Shading (OpenGL Software Lighting) : 2190 CB-GFX
Shading (OpenGL Hardware Lighting) : 4401 CB-GFX
OpenGL Speedup: 7.46
CINEBENCH 9.5
Tester : Bertrand STERN
Processor : MacPro
MHz : 3000
Number of CPUs : 4
Operating System : Mac os X server 10.4.7 Universal Binary
Graphics Card : Ati X1900XT (Single)
Resolution : 2560*1600
Color Depth : Millions
Rendering (Single CPU): 493 CB-CPU
Rendering (Multiple CPU): 1569 CB-CPU
Multiprocessor Speedup: 3.18
Shading (CINEMA 4D) : 590 CB-GFX
Shading (OpenGL Software Lighting) : 2196 CB-GFX
Shading (OpenGL Hardware Lighting) : 4387 CB-GFX
OpenGL Speedup: 7.44
the speedup is marginal ... note that the result on the single card are after a bus bandwith reconfiguration to 16x ....
Xbench results stay the same ...
Results 253.02
System Info
Xbench Version 1.3
System Version 10.4.7 (8K1079)
Physical RAM 8192 MB
Model MacPro1,1
Drive Type BootInt
Quartz Graphics Test 188.73
Line 179.97 11.98 Klines/sec [50% alpha]
Rectangle 224.16 66.92 Krects/sec [50% alpha]
Circle 210.67 17.17 Kcircles/sec [50% alpha]
Bezier 195.55 4.93 Kbeziers/sec [50% alpha]
Text 151.16 9.46 Kchars/sec
OpenGL Graphics Test 229.54
Spinning Squares 229.54 291.18 frames/sec
User Interface Test 454.23
Elements 454.23 2.08 Krefresh/sec
i wished we could push things further regarding this but the X1900 XT already is a great graphics card in all terms , value , stability and power.

MSI 290x lightning crossfire

Hey guys I currently have 1 MSI 290x Lightning. A friend of mine just sold me his ASUS Rog Swift 27" 2560x1440 144hz monitor so I want to purchase another 290x lightning, will my EVGA Supernova 1000 G2 PSU be enough??

Quote from: flobelix on 04-January-15, 01:51:31
First of all please don't open multiple topics on the same issue. The one in Gaming (as you don't have a Gaming series vga) has been removed.
A system with a single reference design R9-290X requires 33A and a 600W psu. For a Lightning make it 40A and a 600W. Any further Lightning will add 20A more. This makes minimum requirements of around 60A and a 750W psu. Your EVGA psu offers 83A and 1000W and should therefor be way enough.
Understood

MSI R6570 MDIGD3 Crossfire ready ?

Similar Messages

Maybe you are looking for