MSI R7870 HAWK BIOS

My ln1 bios has broken,so I need the good ln1 bios.
Please help me!
Could I get the uefi gop bios?
My S/N:602-v281-08sc1210004977
Beacause my ln1 bios has broken,so I can't give it to you.
Waiting for you,
THX

Quote
This is my ln2 bios.
pan.baidu.com/s/1qW2V4wG
is this orignal vbios or?
Quote
But I want use it to ln1 bios,to replace the broken ln1 bios.
what do you mean by this?
and broken how?

Similar Messages

HELP!!!!I need UEFI GOP BIOS for MSI R7870 HAWK 2G

Hi,could i get a uefi gop BIOS for my R7870 HAWK 2G?
Serial Number is: 602-V281-08SC1303005833
This is my rom file :http://pan.baidu.com/share/link?shareid=2536655492&uk=4244730218
Thanks!

here it is

MSI R7870 hawk GOP/UEFI bios request

Currrent bios is here h t t p s : / /drive.google .c0m/file/d/0B5nriMoNl-42ZHRBX1dZZ056VW8/view?usp=sharing (replace the 0 in com with an "o" also remove the spaces where necessary)
S/N:602-V281-010B1211011666
I'm also new but read the readme.

use this one
https://forum-en.msi.com/index.php?topic=178658.msg1289305#msg1289305

Help !!!UEFI GOP BIOS for MSI R7870 HAWK 2G

please help me to get the UEFI GOP BIOS
SN ：602-V281-08SC1306035735-5P2
EMAIL:[email protected]

QuoteMSI Gaming Bios V 22.3
Audio Driver: Realtek Win10_R279 (latest from website)
Install the proper driver for Win8 from:
http://www.msi.com/support/mb/970-GAMING.html#down-driver&Win8.1 64

[Request] UEFI GOP BIOS for msi R7870 hawk

skydrive.live.com/redir?resid=CF611BF909BC424B!156&authkey=!AM0a78lWbXTXbh4&ithint=file%2c.rom
This is my vbios saved by gpu-z.

Re: help !!!UEFI GOP BIOS for MSI R7870 HAWK 2G

I guess, I should locked this thread as my board is for RMA and I just wait 3-4 weeks to get it back again.

Vbios request MSI R7870 hawk

Good day.
My S/N 602-V281-08SC1304041807
My BIOS in attachment. Please send me a UEFI / GOP Vbios.

Could just locate the attached normal vbios (there is no "LN1" by the way, LN2 stands for Liquid nitrogen which can be used for cooling with most extreme oc).
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the provided archive (130.rar) and put the included file (TV281MH.130) on that stick.
Rename TV281MH.130 to 130.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 130.rom [ENTER] and let it flash the vbios.

MSI 6870 Hawk BIOS

Bios of others is "013.011" , so this is "013,012" ?
"GPU Clock" Why is 900MHz ?
Help me!!

we don't known, you can ask msi here: http://support.msi.com/

2 x R7870 Hawk with MSI Z77A-GD65 MB in CrossFire Crashes

Hi,
I can't get Corssfire to work, as soon as an app tries to use 3D the system hard crashes, blue screens or reboots.
When I load GPU-Z the system freezes.
My system config is:
Windows 7 64 Bit
Intel Core i7-3770K
8 GB RAM
180GB INTEL SSD
MSI Z77A-GD65 MB with Bios version 10.5
2 x MSI R7870 Hawk in CF
1000 watt OCZ power supply
- Each card on its own works fine.
- I have lowered the clock speed to spec (1000Mhz)
- Using ATI Catalyst 12.8
- Cards are installed on PCI_E2 & PCI_E5 slots
- No monitors are connected to second GPU
This is a fresh system, no other drivers have been installed.
Anybody else have this problem?
Motherboard and 2 Graphics cards are all MSI.
What is the best way to uninstall ATI Catalyst so I can try older drivers?
Are the drivers ATI drivers on MSI website different to the ones on AMD's website?

Use >>Driver Fusion<< in Safe Mode to remove current VGA drivers.
Then install the latest drivers from MSI: http://www.msi.com/product/vga/R7870-Hawk.html#/?div=Driver&os=All
Try again
MSI drivers are verified for the MSI product they are offered for.

[Request]UEFI GOP Bios request-R7870 HAWK

Hi,could i get a uefi gop for my R7870 HAWK
S/N:602-V281-08SC1305046450-369
BIOS dump:
onedrive.live.com/redir?resid=78F14AEF1C52D97A%216757
Thanks a lot Orz.

Use the attached.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the provided archive (130.rar) and put the included file (TV281MH.130) on that stick.
Rename TV281MH.130 to 130.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 130.rom [ENTER] and let it flash the vbios.

[BIOS REQUEST] MSI 270X Hawk 2GB

Hi! I have a problem with a newly purchased MSI 270X Hawk 2GB. I have tried it in the following PCs:
PC 1
Main Board: Asrock Z68 Extreme3 Gen3
Bios Version: 2.30 (newest)
Video Card: MSI 270X Hawk 2GB
PSU: FSP ATX-400PNF
12v rail Rating of listed PSU: 12V1: 18A, 12V2: 18A
CPU: Intel Core i5-2500K 3.3GHz
Memory: 2 x KINGSTON 8GB HyperX XMP Blu DDR3 1600MHz CL9 [KHX1600C9D3B1K2/8GX]
SSD: Samsung 830 64GB (Tried with a Samsung HD502HJ HDD too, on a fresh Windows 7 install, same results)
CPU COOLER: Cooler Master Hyper TX2
OC: No
Operating System: Windows 7 Ultimate SP1 64 bit
PC 2
Main Board: Gigabyte G41M-ES2L
Bios Version: F3
Video Card: MSI 270X Hawk 2GB
PSU: FSP ATX-350PNF
12v rail Rating of listed PSU: 12V1: 18A, 12V2: 16A
CPU: Intel Pentium E5300 2.6GHz
Memory: 2 x 2GB Kingmax DDR2 1066MHz [KLEE88F-B8NU6]
SSD/ HDD: Samsung HD321KJ
CPU COOLER: stock
OC: No
Operating System: Windows 7 Home Premium SP1 64 bit
GPU S/N: 602-V303-02SB1312000115
It works with the default windows driver in both PCs, but when the AMD driver is installed it fails after the windows welcome screen. Sometimes the screen turns blue, sometimes black/grey, and sometimes there are blue squares in lines on the screen and the PC freezes up. To get it to work again I have to boot into safe mode and remove the driver with Display Driver Uninstaller, since the normal uninstaller doesnt work in safe mode.
Drivers I tried:
13-12_win7_win8_64_dd_ccc_whql
amd_catalyst_14.1_betav1.6
MSI Graphics Driver (both from the CD and the website)
Tried with both BIOS modes. Tried in both PCI-E slots in the asrock board. The 6 pin power connectors are split between the two rails.
I also have an MSI 270X Gaming 2GB, and it works in both PCs without issues. The previous owner updated the BIOS on that one.
I know that the PSUs are far from optimal, but they had no problems with the 270X Gaming on full load or my previous GTX275, even when I overclocked the CPU and had 4/5 hard drives in there. The PSU upgrade (XFX Pro 850W) is on its way, but it is still around a week or more until it arrives.
Here is the current bios:
www5[DOT]zippyshare.com/v/31736342/file.html
Picture of error screen:
I would like to try flashing the newest bios to see if it helps.
Thanks in advance.

Quote
Here is the current bios:
www5[DOT]zippyshare.com/v/31736342/file.html
Quote
Here is the other BIOS:
www8[DOT]zippyshare.com/v/10284353/file.html
Both come up with: "File does not exist on this server"
None the less >>this<< is the latest
TV303MH.131 is normal vbios, TV303MH.141 is LN2
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (131_141.rar) and put the included file (TV303MH.131 or TV303MH.141) on that stick.
Rename TV303MH.131 / TV303MH.141 to 131.rom / 141.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 131.rom (or 141.rom) [ENTER] and let it flash the vbios.

Request MSI N660 Hawk GOP UEFI bios

Hi,
I would like to request a UEFI GOP BIOS file for my MSI N660 Hawk with the serial number: 602-V288-030C1304036759 .
Would be very nice and thanks a lot for the help.

use this one:
https://forum-en.msi.com/index.php?topic=179955.msg1304882#msg1304882

Request GOP bios for MSI R7870-2GD5T/OC

Hello, I'd like to request a GOP bios for my
MSI R7870-2GD5T/OC card
S/N: 602 V274 090B130 3001025
Original bios:
**https://www.dropbox.com/s/w4vr11vqn1ps3vb/Pitcairn.rom**
Btw: thanks for this great place!

Wow, that was fast, thank you very much!

MSI R7870 2GD5T/OC Uncontrollable/Loud Fan

Hi,
Yesterday I purchased an R7870 2GD5T/OC from a local retailer. I installed it and everything seemed fine, until I started gaming. Under load, the fans spin up to 4000+ rpm, even though the temperature sits around 50-55 degrees. It's incredibly loud and I'm afraid of wearing the fans down quickly.
I tried using Afterburner and CCC to manually adjust the fan speed. This works when the card is idling; however under load the card ignores all settings and hits 4000+ rpm. And while the tachometer in Afterburner shows the card spinning at 4000+ rpm, the Fan speed still indicates it at 40% speed (or anything I change it to).
I have so far re-installed drivers (with drivesweeper), rolled back drivers, re-installed Afterburner, and tested the card in another system. The problem persists, and there seems to be nothing I can do. I also tried running an old 6850 on my system, which runs fine, so I'm sure the software is not an issue.
As suggested in another thread, the problem might be caused by something in the BIOS. I have already flashed the BIOS once, however the problem still exists.
Any help at all would be greatly appreciated. Cheers,

MOBO: Gigabyte P55A-UD4P P55 1156pin USB3 DDR3 Motherboard
Bios: Version F9
VGA: MSI R7870 2GD5T/OC
PSU: Antec TruePower TP-650Watt (54a 12v rail)
CPU: Intel Core i5-760 Lynnfield 2.8Ghz LGA1156 CPU
RAM: G.Skill Ripjaws 1333 4x2gb F3-10666CL9-2GBRL
HDD: Samsung Spinpoint F3 1tb
HSAF: Coolermaster Hyper 212+ CPU cooler
OS: Windows 7 64bit Home Premium
No overclocking.
And yes, I did try the card in another system, and the same problem occurred - The fan would speed up to full, and become uncontrollable under load.
I also tried a HD6850 in my current system, and it ran completely fine.
This is what Afterburner shows when the card is under load.

UVD-power summary of MSI 5770 Hawk, 5570, & 785GTM-E45; Hawk min voltage

MSI R5770 Hawk
MSI R5570-MD1G
MSI 785GTM-E45
GPU PWR SYS f_GPU f_VRAM V_GPU set V_GPU meas Note 1: freq & voltage Note 2: system state
DCW Mhz Mhz V V
785 35 197 400 idle stock idle, light (5 min max)
785 46 498 400 UVD stock 1x 720p sharpen complex 2
5570 43 157 200 0.9 idle stock idle, light (5 min max)
5570 54 400 800 1 UVD stock 1x 720p sharpen complex 2
5570 52 400 800 0.9 0.8987 UVD undervolt/underclock 1 1x 720p sharpen complex 2
5570 55 400 800 0.9 0.9001 UVD undervolt/underclock 1 1x 1080p sharpen complex 2
5770 53 157 300 0.95 0.956 idle stock idle, light (5 min max)
5770 58 157 600 0.95 0.957 idle 2x f_VRAM idle, light (5 min max)
5770 65 157 1200 0.95 0.957 idle 4x f_VRAM (nom. max) idle, light (5 min max)
5770 61 400 900 0.95 0.958 idle @ UVD stock idle, light (5 min max)
5770 72 400 900 0.95 0.9499 UVD stock 1x 720p sharpen complex 2
5770 75 400 900 0.95 0.9508 UVD stock 1x 1080p sharpen complex 2
5770 60 157 300 0.95 0.9498 UVD undervolt/underclock 1 1x 720p sharpen complex 2
5770 63 157 300 0.95 0.9503 UVD undervolt/underclock 1 1x 1080p sharpen complex 2
5770 61 157 200 0.95 0.9497 UVD undervolt/underclock 2 1x 720p sharpen complex 2
5770 61 157 200 0.95 0.9497 UVD undervolt/underclock 2 1x 1080p sharpen complex 2
AMD Power Play states are glitchy, and not all videos detect and run with DirectX Video Acceleration. So max power during playback can end up on the highest power state which is not shown above.
MSI R5770 Hawk minimum power
The uP6204 power controller used on the MSI R5770 Hawk design nominally supports 0.5625 to 1.3500V in 0.0125V steps.
With a stock video BIOS, MSI Afterburner 1.50/1.51 allows the MSI R5770 Hawk to be soft-modded from 1.000 to 1.350V in the roughly 0.0125V steps.
The video BIOS can be set as low as 0.950V but with no steps between 0.950 and 1.000V.
MSI Afterburner 1.60 beta 4 or earlier adds the AllowCaptureVoltageDefaults profile setting. Acquiring, then changing the default GPU voltage allows "resetting" the Hawk to 0.950V in Afterburner for the highest frequency state. This allows maintaining Power Play transitions and running the max frequency at 0.950V, where Afterburner by itself is limited to 1.000V.
The max frequency state of the Hawk is 875 MHz 1200 MHz 1.200V. To have the most flexibilty on control the Hawk, lowest power in the Desktop/HTPC/light gaming, and the ability to manually overvolt/overclock for specific games: run the Hawk at 0.950V in the max frequency state.
How-to work around Afterburner and the Hawk design to run 1.000V in the max frequency state. *
1) in the video BIOS, leave the voltage as 1.200V in the BIOS--which is required for Afterburner to change the Hawk voltages in Windows
2) in the video BIOS, change the GPU frequency of that state to something less than or equal to the maximum stable frequency at 1.000V
3) in Afterburner, Reset to default settings **
4) in Afterburner, change "Core Voltage" to 1.000V
5) in Afterburner, Apply
6) in Afterburner, Save to Profile 1
7) in Afterburner, \Settings\Profiles\2D Profile\ & "3D Profile" choose "Profile 1" ***
8) on each Windows startup, run Afterburner
How-to work around Afterburner and the Hawk design to run 0.950V in the max frequency state.*
1) in the video BIOS, leave the voltage as 1.200V in the BIOS--which is required for Afterburner to change the Hawk voltages in Windows
2) in the video BIOS, change the GPU frequency of that state to something less than or equal to the maximum stable frequency at 0.950V
3) in Afterburner, confirm the voltage default setting for 0.950V--capture voltage defaults as needed using AllowCaptureVoltageDefaults mentioned above
4) in notepad as an Administrator (Win 6.x), change the Hawk's profile configuration file to 0.950V
example:
[Settings]
uP6204_Defaults=D7 20
5) in Afterburner, Reset to default settings **
6) in Afterburner, change "Core Voltage" to 1.000V--changing the profile setting to 0950/950 is not useful as of 1.60 beta 4.
7) in Afterburner, Apply
8) in Afterburner, Save to Profile 1
9) in Afterburner, \Settings\Profiles\2D Profile\ & "3D Profile" choose "Profile 1" ***
10) on each Windows startup, run Afterburner
11) in Afterburner, "Reset" to re-enable 0.950V.
* UnlockVoltageControl in the primary Afterburner profile's [Settings] will likely be needed.
** Only default profiles support Power Play states correctly.
*** Having a non-"default" profile in 3D results in the "3D Profile" activating instead of the UVD in the BIOS.
MSI Afterburner, default voltages
Profile Idle V_GPU @ V_CORE (V)
D7 12 1.125
D7 14 1.100
D7 16 1.047
D7 18 1.049
D7 19 1.037
D7 20 0.949
D7 21 0.937
D7 22 0.925
D7 23 0.912
D7 24 0.899
Power Play states in RBE 1.25
0 Boot 00 -> 00 -> 00
1 Power saving 01 -> 02 -> 00
2 UVD 03 -> 03 -> 03
3 Power saving 04 -> 02 -> 00
4 ACPI 01 -> 01 -> 01
Stock clocks & V_GPU
Clock info 00 01 02 03 04
f_GPU 875 157 600 400 400
f_RAM 1200 300 1200 900 1200
V_GPU 1.20 0.95 1.00 0.95 0.95
My current and likely final settings for MSI R5770 Hawk:
MOD clocks & V_GPU
Clock info 00 01 02 03 04
f_GPU 714 157 600 157 400
f_RAM 1200 300 600 300 600
V_GPU 1.20 0.95 0.95 0.95 0.95
Afterburner Profiles
# CoreVoltage CoreClk MemClk
1 0950 714000 1200000
2 1000 785000 1200000
3 1125 902000 1200000
5 1200 951000 1200000
More data & full system config:
http://forums.techpowerup.com/showpost.php?p=1858205&postcount=1

MSI R7870 HAWK BIOS

Similar Messages

Maybe you are looking for