MSI R7950 Twin Frozr III Temp Issues
I have been having issues with my video card (MSI R7950 Twin Frozr III) under load and previously even while idle with temperatures being way higher than they should be. Browsed many forums and it was suggested that I change the thermal paste, which fixed part of the issue (The video card under "normal" load went from 95C to 75-84C while at 90 to 100% load the temperatures rises back up to the 90s). Before changing the thermal paste, the idle temperatures were around 60, under regular load a little over 90 as stated previously.
The video card runs perfectly otherwise which has me thinking it's most likely a problem related to the heatsink and cooler itself.
I'd personally rather avoid RMA if possible so my question is, is it possible for a cooler/heatsink to cause such a high temperature issue and if so, would purchasing an aftermarket cooler fix the problem or could there be other issues leading to the high temperatures other than the cooler/heatsink itself?
Thank you for your time.
In case this is relevant in any way:
Intel i5 750 OC'd @ 3.74GHz
ASUS P7P55D-E Pro
Antec EarthWatts 750W +3.3V@25A, +5V@25A, +12V1@40A, +12V2@40A, +12V3@40A, +12V4@40A, -12V @ 0.5A, [email protected]
CORSAIR XMS3 2x4GB CMX8GX3M2B1600C9
WD Caviar Black 1TB 7200RPM 32MB Cache SATA 3.0Gb/s
Windows 7 Ultimate 64 Bit.
Catalyst 12.4
After flashing to this vbios, I seem to have gained performance, but the card also seems to be running a bit more hot which could be affected by me being in a different area in the game or slightly higher temperature in my room around the computer, etc.
I haven't tried changing drivers lately, had before when I first was faced with this temperature problem (Have been busy for a while and never bothered trying to figure the issue or try reapplying thermal paste to see if it would fix it until I got time for it recently). I tried both AMD's official drivers, the drivers I had at the time for my 4890 as well and the MSI auto-update software, none of which seemed to fix the heat problem.
If you believe I should try drivers now and see if it can fix the problem once again I don't mind trying.
Similar Messages
-
GOP / UEFI BIOS Request for MSI R7950 Twin Frozr III
I am looking for a GOP / UEFI compatible BIOS for my GPU. I believe my 7950 has the 7970 PCB.
S/N: 912-V803-685B1101002350
Current BIOS: h-t-t-p://up.ht/18pwh6B
More Info:Quote
GPU Device Id: 0x1002 0x679A
113-C3861300-X03
113-MSITV277MS.270 TAHITI B0 PROH2 C38613 GDDR5 3GB 500E/150M
(C) 1988-2010, Advanced Micro Devices, Inc.
ATOMBIOSBK-AMD VER015.031.000.001.001867
V27717S.SB
PowerTune Limit: 200 to 300
CCC Overdrive Limits
GPU Clock: 1100.00 MHz
Memory Clock: 1575.00 MHz
Clock State 0
Core Clk: 960.00 MHz
Memory Clk: 1250.00 MHz
Flags: Boot
Clock State 1
Core Clk: 960.00 MHz
Memory Clk: 1250.00 MHz
Flags: Optimal Perf
Clock State 2
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: UVD
Clock State 3
Core Clk: 300.00 MHz
Memory Clk: 150.00 MHz
Flags:
Thank you!Ah, yes you are correct. I just double checked everything and I uploaded the wrong BIOS file and BIOS info (I was messing around with different BIOSes and upped the wrong one). My serial number is 100% correct, though. This is the current one I have:
015.020.000.000.001083 (Download link: https://mega.co.nz/#!31gBjJ7A!Yr3bX088I8I5aSK0CbEF3hSAm3dhWgVfbb0rvw2 kVVQ)
Just out of curiosity, what is the difference between that version and the version of the one I linked which was "015.031.000.001.001867"? Is it a newer version? Or is there a newer version for my particular card? -
MSI R6950 Twin Frozr III PE strange heat issue!
Hi guys,yesterday i've decided to upgrade my PC with brand new Sandy Bridge configuration,but after the first boot i've had a very unpleasant surprize with my VGA card .Right after power on my PC everything went good,display was on and showing the Bios Setup screen,but after 30-40 seconds my the VGA fans started to spin at full speed and restarted the system but after that my 40" lcd display was only showing "no signal detected" .From this point i've tried everything to get my system going,i've disabled the onboard VGA,swapped RAM modules,toggle every PCI and PCI-E add-on cards,bios reset but the issue was still there.
A couple of times i've managed to get into Windows OS but after 10 second the PC restarted again.I'm not really sure what's the issue here but i do noticed that after 10 second from boot the VGA card is getting very hot (can touch it only for 1 second) but only in the area near the power connectors,next to the capacitors...
Here's my configuration:
- CPU: Intel i5 2500K
- MoBo: Asrock Z68 Extreme3 Gen3
- RAM: Corsaire Vengence 8GB (2x4GB) DDR 1866
- PSU: Enermax Liberty 620 W
- VGA: MSI R6950 Twin Frozr III PE
- Case: Cooler Master HAF-X
BTW,my old MSI Radeon HD4870 is working with the above configuration and i also tested the MSI R6950 Twin Frozr III PE on 3 different PCs same had same issue,so if you guys have any idea about this issue please post here.Yeah,i've already compiled the RMA form with the retailer but it doesn't have this VGA in stock anymore.I really hope it won't need months for the RMA procedure.
-
MSI N570GTX Twin Frozr III Power Edition/OC memory clock?
I have had an MSI N570GTX Twin Frozr III Power Edition/OC for about 6 months now and have used MSI Afterburner to monitor temps etc. Today I used it to lower my overclocking as others had said Ghost Recon Future Soldier doesn't crash if you take it off.
If you look at the MSI product page for the card (the forum won't let me post a link to it!?) you can see the Memory Clock Speed(MHz) says 4000 yet in Afterburner mine said 2000Mhz and the slider was in the middle. I am pretty sure there is no multiplier at work here so mine wasn't being overclocked?
Any ideas? I have reduced it down to 1800Mhz and GRFS doesn't crash anymore but can I take it up to 4000Mhz safely in future? I do not want to overload the card.you have multiply the memory value x2 to get the effective speed
-
Hi, I have MSI 7850 Twin Frozr III 2GB and I have a problem.
I noticed a mild flickering in games like F1 2012, GTA IV (it flcikers in every game) but it doesnt look bad but it still shoudn't happen.
What do you thin it could be?
Driver are updated.
Monitor is LG W2240 21,5 inch.
Ask if you need more information.Did what you said, notnig happend.
I fixed problem in only one game by turning vsync on in game adjustments.
EDIT:
I think this is the same problem as mine
http://www.tomshardware.co.uk/forum/352321-15-7850-issues
Any tips? -
Re: msi r7950 twin frozr
Iam wanting to check what power my graphics card is using was looking at the zelman zm-vpm 1
My 7950 has the 6+8 pcie which I think can use up to about 340 watts is and the zelman only does up to
240w so would I be able to use two of them or does anyone know of a better product thanksAlready got the tx750 just wanting to monitor what my system is using
System is p67a-gd65 b3
Intel I5 2500k
16gb corsair vengeance ram
Kulher h20 620
MSI r7950 twin frozr oc 6+8pcie
Coolermaster haf 920 plus
Corsair tx 750 watt
1 blu-ray drive
1 ordinary drive
1 tb hdd
And want to add 1 SSD drive -
MSI R6950 Twin Frozr III PE/OC "No Signal"?
Hi guys!
I've just bought the MSI R6950 Twin Frozr III PE/OC, but my monitor dosent recieve any signal at all. Both power cables are plugged in, and my PSU should be big enough to manage it.
The slot works fine with my old card, a HD 5450, so is my card faulty?
Win 7 32 bit
Motherboard: Gigabyte GA-H55M USB3 rev 2.0
Proccesor: Intel Core i5 2.80
PSU: OCZ600MXSP 600W
Memory: 4GBThe card has two power cables, which both are plugged in. If not, a red LED lights up in the card.
I've just removed the power cable form the mobo and removed the battery from the mobo to do a clear CMOS, but unfortunately with the same results. The fans are running, but my screens says "No Cable" and goes completely black -
hi was wondering if anyone could help please i have ordered a msi r7950 twin frozr oc
and i was wonder if my system and power supply would work with it i have searched internet still a bit confused
also am i right with that pcie 3 graphics cards are backwards compatable with 2.0 slots.
my system is
msi p67a-gd65 b3
intel i5 2500k
duel corsair veng ram 2x4 gb
kuhler h20 620
corsair tx750 v2 which has one 12v rail 62amp
would the be good enough please helpQuote from: flobelix on 31-July-12, 00:41:26
The 7950 Twin Frozr 3GD5 uses a custom board design (besides better quality) made for more oc ability. Therefor it is able to consume more power than a reference board only having 2 x 6 Pin
The PEG Slot will allow up to 75 W power consumption while a PCIe 6-Pin will add up to 75 W. So reference board with 2 x 6 pin will be a allowed to consume 225 W power in total (75 W + 2 x 75 W)
An 8-pin PCIe will allow 150 W power consumption what allows up to 300 W in total of power consumption resulting in more headroom for oc on your card.
Yup correct, just remember to add other hardwares like 2500K with 95watt TDP, HDD, Optical Drive and other minor parts like fans -
MSI R7950 Twin Frozr 3GD5 V2 or V2/OC?
I just bought a MSI R7950 Twin Frozr 3GD5 V2/OC. That should have a standard core speed of 880Hz Now when I look in "AMD Vision control center -> Information -> hardware"
Then I see that my core speed is 800Mhz it should be 880Mhz. Do I have a V2 or a V2/OC? serial:602-V277-06SB1210136267
Fabrikant grafische kaart Powered by AMD
Grafische chipset AMD Radeon HD 7900 Series
Apparaat-id 679A
Leveranciers-ID 1002
Subsysteem-ID 2771
Leveranciers-id subsysteem 1462
Grafische-busfunctionaliteit PCI Express 2.0
Maximumbusinstelling PCI Express 2.0 x16
BIOS-versie 015.020.000.000
BIOS-onderdeelnummer 113-C3861300-X01
BIOS-datum 2012/05/24
Grootte geheugen 3072 MB
Geheugentype GDDR5
Core in MHz 800 MHz
Geheugenklok in MHz 1250 MHz
Totale geheugenbandbreedte in GB/s 240,0 GB/s
On the product sticker is only mentioned: MSI R7950 Twin Frozr 3GD5 V2
There is a sticker of Live Update on the box and below it is a marked OC..... ???Quote from: madmecca on 30-January-13, 20:32:26
I have MSI 7950 oc/v2 mine is 880 mhz
what's s/n of your card? -
Hello,
Can anyone tell me if MSI is planning to release a Ati 7990 with an Twin Frozr III VGA card?
I would really like to buy this card when it comes out... But I'm not sure if it will... I've read reports that MSI will be launching a dual GPU Ati 79xx card... So that should be the 7990...
Could someone verify this information? Does anybody know if the Twin Frozr III version is coming?
Best regards,
MartinQuote
Can anyone tell me if MSI is planning to release a Ati 7990 with an Twin Frozr III VGA card?
Don't think so. Dual cards are always reference design with reference coolers.
So i don't see reason that this one gonna be exception.
For lower models than 7990, yes there will be versions with Twin Frozr III cooler.
Some are already out, like 7950 with TF3:
http://www.msi.com/product/vga/R7950-Twin-Frozr-3GD5-OC.html
and probably 7970 with TF3 will follows shortly. -
Request: UEFI/GOP VBIOS - MSI N660GTX Twin Frozr III OC
Hi,
I would like to request a VBIOS for "N660GTX Twin Frozr III OC".
Serial Number : 602-V287-050B1302029185
Current BIOS: h_ttps://dl.dropboxusercontent.com/u/265064/GK106.rom
Thank youUse this: https://forum-en.msi.com/index.php?action=dlattach;topic=173506.0;attach=12065
-
Is the MSI 570gtx twin frozr iii being discontinued
Newegg has this card as deactivated, Amazon has it temporarily out of stock, and Tigerdirect used to carry it now it is gone. I ordered mine from Amazon last May 25 and it still has not shipped. What's happening to this card??
^same!
BUMP!
I ordered this card in one online shop on the 30th of June. It was one of the very few shops in Germany where it was listed as available. The next day I got a message that the card would be delivered on the 13th of JULY!
On the 13th of July I received a mail from the shop, that the card won't be shipped until the 27th. In the meantime no online shop had this card listed as available!
I cancelled my order on the 13th and ordered from another place where I was assured that a shipping was underway due 21st. Yesterday I called them only to find out that the shipment has been delayed. It is now expected in 11 days! This means that they are expecting the cards around the 1st of AUGUST! You cannot find an MSI N570 GTX Twin Frozr III PE OC in any online shop in Germany to this day.
I ordered my card on the 30th of June and it will be more than a month before I get it. This card vanished from the market here for the whole month of July. As a passionate fan and potential customer, I'd very much appreciate an explanation.
Thanks!
Regards,
dieselpower -
Two displays for MSI R6950 Twin Frozr III Power Edition/OC graphics card ?
Is it possible to have two displays simultaneously connected to this graphics card:
http://www.msi.com/product/vga/R6950-Twin-Frozr-III-Power-Edition-OC.html#?div=Overview
The card has two DVI-outputs "DVI Output: 2 (Single-Link DVI-D x1, Dual-Link DVI-I x1)". I can use one display at a time and the second display only shows "No signal" error. I would like to use two displays when playing PC games, is it possible with this craphics card? Both my displays have VGA connector cables, and they are connected to the card with an VGA/DVI adapter.Quote from: Svet on 19-January-12, 22:12:52
what monitors you are using and what resolutions you're trying to use?
Both monitors are old models: 1) Panasonic PanaFlat PF90 2) acer AL 707.
I'm not sure what resolution I was using on acer when I tried to connect both monitors, but now I'm using PanaFLat with 1280 x 1024. Maybe I should try to set them both on 1024 x 768 and try again. -
I currently purchased MSI 6870 Twin Frozr II and I'm about to overclock it. Although, I want to know the safe temp for this card.
-Thanks.The Twin Frozr II is a very good cooler so you shouldn't have much problems with temps. The speed will adjust accordingly to keep it in safe limits. I'm not sure what the max safe temps are for your card but certainly don't let it go much over 90C.
-
GOP / UEFI Request for MSI R7950 TWIN FROZR 3GD5/OC
I would like to request a GOP / UEFI bios update for the following cards:
Model: R7950 TWIN FROZR 3GD5/OC
S/N: 602-V277-17SB1305095142
and
Model: R7950 TWIN FROZR 3GD5/OC
S/N: 602-V277-17SB1305094686
Thanks!Quote from: Svet on 29-August-13, 22:14:40
can you save and upload its vbios and give link to it?
Here is the link the BIOS for both of the cards:
GObo" class="bbc_link" target="_blank">https://mega.co.nz/#!gAJhHKLK!SCavwEvixZVjCwQ9OgnbvRejbFUV6MADGezSUlF GObo
Please copy and paste the link, otherwise you won't be able to download the file if you directly click on the link (I think there is some forum bug when displaying a url)
Maybe you are looking for
-
Error in distribution of model view
I created a modelview for distribution of CLFMAS types IDOCS from DEV to PRD. Created ports,RFC destination etc. I was able to generate partner profile in the sending system.When I try to distribute the model view in BD64, I get this error . Initiall
-
Please help explain SAP Benchmark Terminology
Hello, I am looking for help in understanding the terminology of some benchmarks for SAP applications. I have read and re-read several pages on their website, including http://www.sap.com/solutions/benchmark/index.epx but still are not 100% clear.
-
I have a compaq presario cq5720f pc with color issues when i open some windows.
some of the windows I open for instince: HP help and support, the background color is dark blue, and I can't see the font.
-
Macbook pro 6,2 (2010): Kernel Panic
Hi Geniuses, I need some help. My MacBook keeps shutting down very often (with kernel panic error) Here is the log (always the same): Interval Since Last Panic Report: 55391 sec Panics Since Last Report: 1 Anonymous UUID: 8AF0E61F-70F2-4205-AEA6-D8C2
-
Transparency issues when printing from Illustrator CS5
I recently designed a flyer for an event that a group of artists and I are doing as a not-for-profit organization that we started, to help clean up the area and promote the arts. When I print the file (saved as an AI), the colors are bold, the font i