MSI R9 270x Hawk Red/Blue Dots

So I had an R9 270X Hawk graphics card which was giving problems like crashing and freezing up the system while doing nothing, so I RMA the card, just got a brand new R9 270X Hawk from the RMA Department, and as SOON as I installed the card I noticed red lines and blue dots all over the screen it's like the size of sand the dots also tried playing BF4 noticed the blue dots then after 30mins it crashed the system.
S/N: 602-V303-02SB1311010121

save and upload current vbios of the card,
see  https://forum-en.msi.com/index.php?topic=167763.0

Similar Messages

  • [REQUEST] UEFI/GOP vBIOS for MSI R9 270X Hawk

    Hello guys.
    Could anyone please hook me up with the latest UEFI/GOP vBIOS for my MSI R9 270X HAWK and instructions on how to install/flash it?
    I'm going to convert my Windows 8.1 Pro installation to a UEFI with SecureBoot installation so need the vBIOS for the same.
    Here are the required files/information:-
    Model - MSI R9 270X HAWK
    S/N - 602-V303-02SB1311009978
    Current vBIOS - 1drv(dot)ms/1u2mShL  (Replace (dot) with .)
    Thanks in advance! :D
    Regards,
    Yash Shah

    Use the attached.
    TV303MH.131 is normal vbios, TV303MH.141 is LN2
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (131_141.rar) and put the included file (TV303MH.131 or TV303MH.141) on that stick.
    Rename TV303MH.131 / TV303MH.141 to 131.rom / 141.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 131.rom (or 141.rom) [ENTER] and let it flash the vbios.

  • Msi R9 270X Hawk 2Gb Black Screen

    It is unfortunate that this is a problem that repeat this often.
    I bought the card in February 2014 and been running perfectly until a few days ago came the famous "black screens" to load the drivers, I've tried everything:
    - Completely clean installation S.O. W7 x64 with Catalyst drivers v13-12 ---> ERROR
    - Completely clean installation S.O. W8.1 x64 with Catalyst drivers v13-12 and the new bios Hybrid for W8 ---> ERROR
    - Restore backups S.O. (W7 x64) where the card working properly ---> ERROR
    - With the default drivers S.O. Catalyst drivers without the graphics card works perfectly but is useless for games.
    I came to think that it is a hardware error and therefore RMA process.
    This is the last step I can take before RMA, if no solution with a new vBios these
    believe are the necessary data:
    Number of card S/N: 602 - V303 - 11SB141008285
    Link vBios: xXx.s000.tinyupload.com/?file_id=55637502591510553426.xXx
    Thank you
    Msi R9 270X Hawk
    Asus P8Z68 Deluxe 
    Intel i7 2600k
    4xKingston HyperX KHX1600C9D3/4GX
    Samsung  SSD 840 EVO 250G
    Intel SSD 520 240Gb
    PSU.  Corsair  AX-850
    Dell 2408 WFP

    Link vBios:   drive.google.com/file/d/0B4N8_jT17QNiaExKMERsU0hVdVU/edit?usp=sharing
    I'm sorry, I have repeated in error
    Quote from: Manolo on 20-August-14, 03:51:01
    It is unfortunate that this is a problem that repeat this often.
    I bought the card in February 2014 and been running perfectly until a few days ago came the famous "black screens" to load the drivers, I've tried everything:
    - Completely clean installation S.O. W7 x64 with Catalyst drivers v13-12 ---> ERROR
    - Completely clean installation S.O. W8.1 x64 with Catalyst drivers v13-12 and the new bios Hybrid for W8 ---> ERROR
    - Restore backups S.O. (W7 x64) where the card working properly ---> ERROR
    - With the default drivers S.O. Catalyst drivers without the graphics card works perfectly but is useless for games.
    I came to think that it is a hardware error and therefore RMA process.
    This is the last step I can take before RMA, if no solution with a new vBios these
    believe are the necessary data:
    Number of card S/N: 602 - V303 - 11SB141008285
    Link vBios: drive.google.com/file/d/0B4N8_jT17QNiaExKMERsU0hVdVU/edit?usp=sharing
    Thank you
    Msi R9 270X Hawk
    Asus P8Z68 Deluxe 
    Intel i7 2600k
    4xKingston HyperX KHX1600C9D3/4GX
    Samsung  SSD 840 EVO 250G
    Intel SSD 520 240Gb
    PSU.  Corsair  AX-850
    Dell 2408 WFP

  • REQUEST: UEFI GOP VBIOS FOR MSI R9 270X HAWK Edition

    I am having problems with my 270X HAWK which I am hoping a new vbios can fix:
    MSI R9 270X Hawk 2GB
    S/N: 602-V303-02SB1310008582
    Card features two switchable BIOS for the LN2 profile.
    First BIOS
    ***https://www.dropbox.com/s/l22sbuh080vv2xr/Pitcairn%20%28BIOS%201%20Left%20Switch%29.rom***
    Second BIOS
    ***https://www.dropbox.com/s/rz4mg3e66yy80ux/Pitcairn%20%28BIOS%202%20Right%20Switch%29.rom***

    Hi mate, I have the same card and was provided the latest UEFI BIOS's here:
    TV303HM.131 (Standard)
    TV303HM.141 (LN2)
    https://forum-en.msi.com/index.php?action=dlattach;topic=176696.0;attach=12596
    Please note: I and another user had issues with the Standard TV303HM.131 BIOS not working in UEFI mode despite the LN2 working fine, so if you could let me know if it works for you that would be extremely helpful in diagnosing compatibility issues between boards etc

  • MSI R9 270x HAWK - Image output un-sharp/smeared

    Hello MSI,
    I purchased a MSI R9 270x Hawk from my friend. The GPU is working fine in games and still has warranty.
    Sadly I'm noticing some weird things regarding image output that I can't explain really well. I went ahead and made some pictures with my phone:
    *It's desktop wide*
    What I've tried:
    - Re-install Windows
    - Installing a older AMD driver version
    - Replaced the VGA cable
    - Tried a different monitor
    The only thing my friend should tell me (Got no proof if he actually did it) is that he he said that he had updated the bios with a newer version which increased performance(?).
    I haven't seen this problem before or had it with my previous GPU which was a Nvidia 9800GTX+. Hopefully the MSI forum is able to help me out.
    According to MSI Live Update the current GPU version is: TV303MS.134
    Edit:
    GPU-Z says the current bios version is: 015.041.000.000.002887 (113-C6310100-X15)

    Quote from: Svet on 19-August-14, 22:34:49
    so what's the issue?
    i can't figure what to look at those photos
    I'm talking about the strips to the right. Can't you see it?

  • MSI R9 270X Hawk Grey Screen of Death

    I have the MSI R9 270X Hawk graphics card. Recently this error occurred randomly a grey screen with horizontal lines . It occurs when I try to run a game, also it will randomly occur when the PC is just idling doing nothing, it renders the computer unusable, only 'fix' is to uninstall the 270x video drivers and run the computer with the motherboard graphics. I have the Corsair TX 650 as my power supply. I read somewhere that it might be a PSU issue but I do not believe that to be the case, it is either a driver issue or a bad card. However, for the past 3 weeks I have been running my games fine, (Tomb Raider, BF4, GTAIV, Assassins Creed 4) all on high settings, with no problems. I included a screenshot of the graphics information as well as the OS and ram etc, also a text file with all the detailed information.
    https:// dl.dropboxusercontent.com/u/59814/270x.jpg
    https:// dl.dropboxusercontent.com/u/59814/270xx.jpg
    https:// dl.dropboxusercontent.com/u/59814/a00.txt
    Any information on a fix would be greatly appreciated.

    Ok, sorry about that.
    Currently seem to have a Grey Screen whenever I boot the desktop with the graphics card installed.
    1. I tried system restore to see if it was a program causing the grey screen, but same problem.
    2. Tried installing the cd version of the AMD drivers same problem.
    3. Installed the latest version of the driver, as well as, beta version same problem.
    4. Removed the graphics card and put it back in booted up, same problem.
    5. Also tried the Molex Cables that came in the box to different power supply on the PSU, same problem.
    PSU:
    Main Board: MSI Z77A-G45
    Bios Version:Version: V2.12, (9/29/2013)
    Video Card Driver Version:13.250.18.0
    Video Card BIOS Version:113-C6310100-X15:
    Video Card: msi R9 270X Hawk
    Video Card S/N: 602-V303-02SB1309098658
    PSU: 650W TX650 V2 PSU 80 PLUS Bronze  
    12v rail Rating of listed PSU: +12V_53A, -12V_0.8A
    CPU: Intel Core i5-3570K CPU @ 3.40GHz, LGA 1155, 77W
    Memory: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
    SSD/ HDD: 120GB SSD, 1TB HDD, 150GB HDD
    CPU COOLER: Cooler Master Hyper 212 EVO
    OC:No
    Operating System: Win 8 Pro 64bit

  • MSI R9 270X HAWK low GPU usage and screen flickering problem

    I bought an MSI R9 270X HAWK vga and I have this screen flickering issue.
    My S/N: 602-V303-02SB1310009419
    I also had another problem: the GPU usage averages at 50-55% on every game (DX9,10,11 games like TESV Skyrim, League of Legends, Crysis 2-3, Battlefield 2-3, Far Cry 3) and never reaches more than 80%(well, once I made it run at 99%, I used ultra settings on Battlefield 4 with Sync on, Ultra preset settings with 200% res. scale so pretty much the maxed out Settings). I'm using this card with 8GB DDR3 Corsair Vengeance RAM with a stock clocked 1090T and AMD's reply for this problem was, that this problem can be driver problem as well as VBIOS.

    I created a bootable usb, placed the files in it (formated, and only these files were at the usb, dos startup directed to win98boot's folder (C:\win98boot) renamed the tv303ms.134 to tv303ms.rom,l after i placed it on the usb and in the boot menu there are four additional options related to the USB (there's no USB only option): FDD, HDD, CDROM, zip. Selecting the FDD and CDROM starts the windows normally, The HDD option ended on the white-black screen, and there's where I can write:   C:\>
    after this i tried to type in: atiflash.exe TV303MS.rom [enter] nothing happened, then atiflash.exe [enter] and popped up some help instructions for the use of atiflash, I pressed enter over and over and then requested another command, I tiped in the tv303ms.rom [enter] and again nothing happened (invalid command I think). What should I do now ? I did some research but still can't figure out what the problem is. :/ (If I done everything correct, maybe the problem related to my motherboard or USB stick?)

  • Red Blue Dots on Nokia N8 photo after capturing.

    Hi I just recently bought a nokia N8 and am having a hard time getting through with it. I bought this last October and immediately updated it to Anna. My problem lies when capturing an image as when the preview is shown, I see red and blue dots randomly scattered across the image. I do not see these dots once I zoom in, however it is very irritating to see such dots when browsing through photos as I expect proper quality even in previews. Can anyone help me?
    PS. I tried installing the camera update to see if this was a version problem, I still have the red and blue dots. Tried downloading an app (ShutterPro lite) and I still have the problems. I seldom use my phone so I'm pretty confused abt the matter.

    When you say "hard reset" do you mean *#7370# or three key depressed power on "hard reset", which should be avoided upon Belle devices? I would have suggested the former, then use option to re-install existing device software within Nokia Suite on PC.
    You mention having Netqin installed which is only just hogging resources for little benefit and I wonder just how many applications you have installed upon this N8.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • MSI R9 270X Hawk - Twin Fan question

    Hello everyone!
    So I noticed this problem a few days ago when I change my PC from the floor to the desk, but after lots of research I manage to collect some good and bad info but I'm not sure if its right.
    I have a R9 270x Hawk 1 year old, and when I s...

    Okay. So I have downgraded the BIOS to the earliest on the download page - V18.3.
    However, the other BIOSes are .exe files. Windows is not installed yet so I cannot use these, and M-Flash will not recognise them.
    I am trying to update the BIOS sequent...

  • MSI R9 270x HAWK "malfunction"?

    Hi, I have owned this graphics card for the last 4 months and its always worked fine apart from getting bluescreens due to html5 videos (other people have the same problem).
    Today while playing BF4 the screen started flickering until it turned kind of red and black so I
    1. Restarted the PC and everything was fine until it got past the point where it asks if I want to boot into safe mode, after that the screen would turn black and nothing would happen, it did boot into safe mode so I thought it might have been some driver that got corrupted.
    2. I decided to install windows 8.1 and then when I went into internet explorer it crashed (this was after quite a few minutes of using the pc) then I restarted and it crashed even sooner.
    3. Took the gpu out, reset the bios and everything was fine. Then I downloaded the drivers.
    4. put the gpu back in and tried to install the drivers but halfway through it crashed again. Now im using the gpu but its not actually working, I think its just going through the gpu to the cpu graphics card.
    Was wondering if there is a fix for this or if I have to RMA it (been 4 months since I bought it so I doubt I can RMA it with scan, that's why I'm posting here).
    Thank you, John
    Edit #1 - I technically didnt buy this since Scan replaced it for a gigabyte r9 270x windforce

    Hi, the bios version I put was actually wrong, its actually the latest update called "F11a".
    The gigabyte card completely stopped working and they told me they found a problem in the card itself.
    edit #1 - http://www.ebuyer.com/386271-gigabyte-ga-z77-ds3h-socket-1155-vga-dvi-hdmi-7-1-channel-audio-atx-motherboard-ga-z77-ds3h this is the motherboard I have

  • MSI R9 270X Hawk vs Gaming Edition IDLE FAN SPEED

    Hello,
    Just wondering, I've seen in a review that the Hawk can achieve in idle a 700 rpm.
    I'd like to ask if this 700 rpm in idle is true and what percentage? (18% maybe?)
    And what about the Gaming Edition, what percentage can achieve in idle and what rpm?
    Thanks in advance

    E-mil, please don't hijack other topics but open an own for your query. >>Please read and comply with the Forum Rules.<<
    -- TOPIC LOCKED --

  • Re: [REQUEST] UEFI / GOP vBIOS for MSI R9 270X Hawk 2G

    Thank you anyway.

    Quote from: huijbers on 30-July-15, 18:46:16I really miss loudness in Nahimic. My wireless card broke and I had to send in my gs60, it came back factory resetted and with bios and firmware and stuff updated. The firs...

  • MSI R9 270x hawk

    Hi,
    6 Months ago i bought this Graphic card and in those months i've been playing low graphics games like Contract Wars (facebook game), the graphic suddently started to show signs like freezing, artefacts (yes i've already tried new drivers), so when everything else failed i went to tomshardware to ask their opinion and i found out this is actually common and what was told me was that the graphic card was showing signs of dying. Since this is one of your products i would like to know what do you have me do to fix this problem.
    vbios
    filedropper .com/pitcairn_1

    Quote from: flobelix on 22-May-14, 00:21:03
    Follow >>Posting Guide<< for assistance.
    Nope it doesn't void warranty but don't flash to anything you find on the internet. You will be provided OFFICIAL one through here, but I don't think it will change anything if it started to happen suddenly.

  • MSI R9 270x and problems with switching power-saving modes

    hi,I bought this video card but now I began to twitch screen sometimes when switching video card power saving modes
    it all happens in a game, or at the sites but not on the desktop
    how to disable power saving mode so that it always runs at maximum frequency?
    or how to disable Perf Level 0

    Ok, sorry about that.
    Currently seem to have a Grey Screen whenever I boot the desktop with the graphics card installed.
    1. I tried system restore to see if it was a program causing the grey screen, but same problem.
    2. Tried installing the cd version of the AMD drivers same problem.
    3. Installed the latest version of the driver, as well as, beta version same problem.
    4. Removed the graphics card and put it back in booted up, same problem.
    5. Also tried the Molex Cables that came in the box to different power supply on the PSU, same problem.
    PSU:
    Main Board: MSI Z77A-G45
    Bios Version:Version: V2.12, (9/29/2013)
    Video Card Driver Version:13.250.18.0
    Video Card BIOS Version:113-C6310100-X15:
    Video Card: msi R9 270X Hawk
    Video Card S/N: 602-V303-02SB1309098658
    PSU: 650W TX650 V2 PSU 80 PLUS Bronze  
    12v rail Rating of listed PSU: +12V_53A, -12V_0.8A
    CPU: Intel Core i5-3570K CPU @ 3.40GHz, LGA 1155, 77W
    Memory: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
    SSD/ HDD: 120GB SSD, 1TB HDD, 150GB HDD
    CPU COOLER: Cooler Master Hyper 212 EVO
    OC:No
    Operating System: Win 8 Pro 64bit

  • R9 270x Hawk stop working properly

    Hi, I need assistance please
    I was playing Skyrim when the screen turn black and stop responding so i reboot manually and when win get loaded the screen goes black again and the mouse and keyboard stop working too. After a long day trying to  make the card work again uninstall all the drivers and that make me able to start win normally, but when I try install the drivers again, it freeze and put the screen black again, i also try switch between the default bios and the ln2 bios and nothing, I don't know what else to do.
    My system is
    Board MSI Z87 g45 gaming
    VGA  msi r9 270x hawk
    PSU:  Corsair tx 750
    Intel Core I5 4670k
    MEM: Corsair vengeance 1600 2x4gb
    OS: win 8.1 pro

    Hi there, sorry for being annoying, but I really need your help, the tech support of msi don't give a solution and sincerely i got more faith in you guys, at least tell me that my vcard is bad so I can rma it, but really don't want to do that, it was working very good, I hope that is something about the bios or the vbios, so y can reflash something new or older and keep working normally :(

Maybe you are looking for

  • How can i remove pictures from my droid turbo without having to use the touch screen on the phone at all?

    how can i remove pictures from my droid turbo without having to use the touch screen on the phone at all?  my screen is cracked and i am waiting on a replacement phone.  as far as i can tell in order to access the phone storage through my computer, i

  • My external hard drive disappeared on Windows 8

    it had worked fine until now.  Windows 8 updated itself today and the external HD is nowhere to be found.  I attached it to another computer and the external drive works fine... all the files were there, accessible and no loss of speed.  So it is def

  • Determining the Extent (Projected Bounds) of an SRID

    Hi All, I'd like to determine the extent (Projected Bounds) of an SRID (in its own Coordinate System). Is this possible using any Spatial functions or will I have to parse the WKTEXT and perform some operations ? This is as an alternative to a previo

  • MM: Net Weight quantity in Migo

    Hi expert, We are going to capture net weight quantity in MIGO which will Impact on MB51 standard  report so that we could  consider or claim against the vendor for difference quantity. Is it possible in MIGO or we have to develop through enhancement

  • Ipod 4th gen Auto pause?

    I've got an ipod 4th gen 20gb, and when i take out earphones when playing, or with a slightly faulty connection the ipod automatically pauses itself. Is there any way I can turn this feature off, as it pauses all the time when connected to a Hi-Fi th