MSI R9 270X Hawk - Twin Fan question

Hello everyone!
So I noticed this problem a few days ago when I change my PC from the floor to the desk, but after lots of research I manage to collect some good and bad info but I'm not sure if its right.
I have a R9 270x Hawk 1 year old, and when I s...

Okay. So I have downgraded the BIOS to the earliest on the download page - V18.3.
However, the other BIOSes are .exe files. Windows is not installed yet so I cannot use these, and M-Flash will not recognise them.
I am trying to update the BIOS sequent...

Similar Messages

  • Msi R9 270X Hawk 2Gb Black Screen

    It is unfortunate that this is a problem that repeat this often.
    I bought the card in February 2014 and been running perfectly until a few days ago came the famous "black screens" to load the drivers, I've tried everything:
    - Completely clean installation S.O. W7 x64 with Catalyst drivers v13-12 ---> ERROR
    - Completely clean installation S.O. W8.1 x64 with Catalyst drivers v13-12 and the new bios Hybrid for W8 ---> ERROR
    - Restore backups S.O. (W7 x64) where the card working properly ---> ERROR
    - With the default drivers S.O. Catalyst drivers without the graphics card works perfectly but is useless for games.
    I came to think that it is a hardware error and therefore RMA process.
    This is the last step I can take before RMA, if no solution with a new vBios these
    believe are the necessary data:
    Number of card S/N: 602 - V303 - 11SB141008285
    Link vBios: xXx.s000.tinyupload.com/?file_id=55637502591510553426.xXx
    Thank you
    Msi R9 270X Hawk
    Asus P8Z68 Deluxe 
    Intel i7 2600k
    4xKingston HyperX KHX1600C9D3/4GX
    Samsung  SSD 840 EVO 250G
    Intel SSD 520 240Gb
    PSU.  Corsair  AX-850
    Dell 2408 WFP

    Link vBios:   drive.google.com/file/d/0B4N8_jT17QNiaExKMERsU0hVdVU/edit?usp=sharing
    I'm sorry, I have repeated in error
    Quote from: Manolo on 20-August-14, 03:51:01
    It is unfortunate that this is a problem that repeat this often.
    I bought the card in February 2014 and been running perfectly until a few days ago came the famous "black screens" to load the drivers, I've tried everything:
    - Completely clean installation S.O. W7 x64 with Catalyst drivers v13-12 ---> ERROR
    - Completely clean installation S.O. W8.1 x64 with Catalyst drivers v13-12 and the new bios Hybrid for W8 ---> ERROR
    - Restore backups S.O. (W7 x64) where the card working properly ---> ERROR
    - With the default drivers S.O. Catalyst drivers without the graphics card works perfectly but is useless for games.
    I came to think that it is a hardware error and therefore RMA process.
    This is the last step I can take before RMA, if no solution with a new vBios these
    believe are the necessary data:
    Number of card S/N: 602 - V303 - 11SB141008285
    Link vBios: drive.google.com/file/d/0B4N8_jT17QNiaExKMERsU0hVdVU/edit?usp=sharing
    Thank you
    Msi R9 270X Hawk
    Asus P8Z68 Deluxe 
    Intel i7 2600k
    4xKingston HyperX KHX1600C9D3/4GX
    Samsung  SSD 840 EVO 250G
    Intel SSD 520 240Gb
    PSU.  Corsair  AX-850
    Dell 2408 WFP

  • REQUEST: UEFI GOP VBIOS FOR MSI R9 270X HAWK Edition

    I am having problems with my 270X HAWK which I am hoping a new vbios can fix:
    MSI R9 270X Hawk 2GB
    S/N: 602-V303-02SB1310008582
    Card features two switchable BIOS for the LN2 profile.
    First BIOS
    ***https://www.dropbox.com/s/l22sbuh080vv2xr/Pitcairn%20%28BIOS%201%20Left%20Switch%29.rom***
    Second BIOS
    ***https://www.dropbox.com/s/rz4mg3e66yy80ux/Pitcairn%20%28BIOS%202%20Right%20Switch%29.rom***

    Hi mate, I have the same card and was provided the latest UEFI BIOS's here:
    TV303HM.131 (Standard)
    TV303HM.141 (LN2)
    https://forum-en.msi.com/index.php?action=dlattach;topic=176696.0;attach=12596
    Please note: I and another user had issues with the Standard TV303HM.131 BIOS not working in UEFI mode despite the LN2 working fine, so if you could let me know if it works for you that would be extremely helpful in diagnosing compatibility issues between boards etc

  • [REQUEST] UEFI/GOP vBIOS for MSI R9 270X Hawk

    Hello guys.
    Could anyone please hook me up with the latest UEFI/GOP vBIOS for my MSI R9 270X HAWK and instructions on how to install/flash it?
    I'm going to convert my Windows 8.1 Pro installation to a UEFI with SecureBoot installation so need the vBIOS for the same.
    Here are the required files/information:-
    Model - MSI R9 270X HAWK
    S/N - 602-V303-02SB1311009978
    Current vBIOS - 1drv(dot)ms/1u2mShL  (Replace (dot) with .)
    Thanks in advance! :D
    Regards,
    Yash Shah

    Use the attached.
    TV303MH.131 is normal vbios, TV303MH.141 is LN2
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (131_141.rar) and put the included file (TV303MH.131 or TV303MH.141) on that stick.
    Rename TV303MH.131 / TV303MH.141 to 131.rom / 141.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 131.rom (or 141.rom) [ENTER] and let it flash the vbios.

  • MSI R9 270x HAWK - Image output un-sharp/smeared

    Hello MSI,
    I purchased a MSI R9 270x Hawk from my friend. The GPU is working fine in games and still has warranty.
    Sadly I'm noticing some weird things regarding image output that I can't explain really well. I went ahead and made some pictures with my phone:
    *It's desktop wide*
    What I've tried:
    - Re-install Windows
    - Installing a older AMD driver version
    - Replaced the VGA cable
    - Tried a different monitor
    The only thing my friend should tell me (Got no proof if he actually did it) is that he he said that he had updated the bios with a newer version which increased performance(?).
    I haven't seen this problem before or had it with my previous GPU which was a Nvidia 9800GTX+. Hopefully the MSI forum is able to help me out.
    According to MSI Live Update the current GPU version is: TV303MS.134
    Edit:
    GPU-Z says the current bios version is: 015.041.000.000.002887 (113-C6310100-X15)

    Quote from: Svet on 19-August-14, 22:34:49
    so what's the issue?
    i can't figure what to look at those photos
    I'm talking about the strips to the right. Can't you see it?

  • MSI R9 270X Hawk Grey Screen of Death

    I have the MSI R9 270X Hawk graphics card. Recently this error occurred randomly a grey screen with horizontal lines . It occurs when I try to run a game, also it will randomly occur when the PC is just idling doing nothing, it renders the computer unusable, only 'fix' is to uninstall the 270x video drivers and run the computer with the motherboard graphics. I have the Corsair TX 650 as my power supply. I read somewhere that it might be a PSU issue but I do not believe that to be the case, it is either a driver issue or a bad card. However, for the past 3 weeks I have been running my games fine, (Tomb Raider, BF4, GTAIV, Assassins Creed 4) all on high settings, with no problems. I included a screenshot of the graphics information as well as the OS and ram etc, also a text file with all the detailed information.
    https:// dl.dropboxusercontent.com/u/59814/270x.jpg
    https:// dl.dropboxusercontent.com/u/59814/270xx.jpg
    https:// dl.dropboxusercontent.com/u/59814/a00.txt
    Any information on a fix would be greatly appreciated.

    Ok, sorry about that.
    Currently seem to have a Grey Screen whenever I boot the desktop with the graphics card installed.
    1. I tried system restore to see if it was a program causing the grey screen, but same problem.
    2. Tried installing the cd version of the AMD drivers same problem.
    3. Installed the latest version of the driver, as well as, beta version same problem.
    4. Removed the graphics card and put it back in booted up, same problem.
    5. Also tried the Molex Cables that came in the box to different power supply on the PSU, same problem.
    PSU:
    Main Board: MSI Z77A-G45
    Bios Version:Version: V2.12, (9/29/2013)
    Video Card Driver Version:13.250.18.0
    Video Card BIOS Version:113-C6310100-X15:
    Video Card: msi R9 270X Hawk
    Video Card S/N: 602-V303-02SB1309098658
    PSU: 650W TX650 V2 PSU 80 PLUS Bronze  
    12v rail Rating of listed PSU: +12V_53A, -12V_0.8A
    CPU: Intel Core i5-3570K CPU @ 3.40GHz, LGA 1155, 77W
    Memory: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
    SSD/ HDD: 120GB SSD, 1TB HDD, 150GB HDD
    CPU COOLER: Cooler Master Hyper 212 EVO
    OC:No
    Operating System: Win 8 Pro 64bit

  • MSI R9 270X HAWK low GPU usage and screen flickering problem

    I bought an MSI R9 270X HAWK vga and I have this screen flickering issue.
    My S/N: 602-V303-02SB1310009419
    I also had another problem: the GPU usage averages at 50-55% on every game (DX9,10,11 games like TESV Skyrim, League of Legends, Crysis 2-3, Battlefield 2-3, Far Cry 3) and never reaches more than 80%(well, once I made it run at 99%, I used ultra settings on Battlefield 4 with Sync on, Ultra preset settings with 200% res. scale so pretty much the maxed out Settings). I'm using this card with 8GB DDR3 Corsair Vengeance RAM with a stock clocked 1090T and AMD's reply for this problem was, that this problem can be driver problem as well as VBIOS.

    I created a bootable usb, placed the files in it (formated, and only these files were at the usb, dos startup directed to win98boot's folder (C:\win98boot) renamed the tv303ms.134 to tv303ms.rom,l after i placed it on the usb and in the boot menu there are four additional options related to the USB (there's no USB only option): FDD, HDD, CDROM, zip. Selecting the FDD and CDROM starts the windows normally, The HDD option ended on the white-black screen, and there's where I can write:   C:\>
    after this i tried to type in: atiflash.exe TV303MS.rom [enter] nothing happened, then atiflash.exe [enter] and popped up some help instructions for the use of atiflash, I pressed enter over and over and then requested another command, I tiped in the tv303ms.rom [enter] and again nothing happened (invalid command I think). What should I do now ? I did some research but still can't figure out what the problem is. :/ (If I done everything correct, maybe the problem related to my motherboard or USB stick?)

  • MSI R9 270x Hawk Red/Blue Dots

    So I had an R9 270X Hawk graphics card which was giving problems like crashing and freezing up the system while doing nothing, so I RMA the card, just got a brand new R9 270X Hawk from the RMA Department, and as SOON as I installed the card I noticed red lines and blue dots all over the screen it's like the size of sand the dots also tried playing BF4 noticed the blue dots then after 30mins it crashed the system.
    S/N: 602-V303-02SB1311010121

    save and upload current vbios of the card,
    see  https://forum-en.msi.com/index.php?topic=167763.0

  • MSI R5770 HD Hawk - Twin Frozr II

    I brought the 5770 Hawk last year to go into my new build system. Finally upgrading from my old dell pentium 4 system (tight budget).
    I built the system on an MSI Motherboard (870AG54), with a AMD 555BE cpu (core unlocked & OC to 3.68mhz). I was still using XP Home until this christmas when I was finally able to buy Win7 64bit.
    The issue I always seem to have had, is that I seem to get "glitches" all the time when playing games. Initially I only really had Civ5, Sims2 & Far Cry whilst using XP, but even then I Civ5 was almost unplayable at times because of the glitches on the graphics (flashing pixels, missing sections of screen & green dots everywhere). I put this down the the game due to comments I had read about problems with it, and hoped that once I had Win7 it would be ok. But after installing Win7 64bit, the game is still glitchy (although not as bad), and even Football Manager 2012 has lots of glitches in when veiwing matches. I have just brought Skyrim and although it looks great if you stand still (ish), once you move the sreen goes mental with glitches and it ruins that gameplay.
    My apologies for my lack of expertise in this field, but whilst I can build and repair systems, I am not an overclocker or really have much experience in graphics card (apart form buying new ones). Can anyone help me out here? Is it my system or the card? Or am I pushing it too hard?
    Tend to play games at 1920x1080 w/o AA due to the card not handleing it.
    Any help would be gratefully received.
    Thanks  

    My system is as follows.
    MSI 870A-G54 AMD 870 (AM3) DDR3 Motherboard
    AMD Phenom II 555 Black Edition CPU (Core unlocked to x4 & OC to 3.68mhz)
    Western Digital Caviar Black 640gb HDD
    MSI Radeon HD5770 Hawk 1gb GDDR5 PCI-E
    OCZ ModXstream Pro 600w PSU
    4gb DDR3 Crucial Ram (10666)
    Built into an Antec 300 case.
    Now running Win7 64bit.

  • MSI R9 270X Hawk vs Gaming Edition IDLE FAN SPEED

    Hello,
    Just wondering, I've seen in a review that the Hawk can achieve in idle a 700 rpm.
    I'd like to ask if this 700 rpm in idle is true and what percentage? (18% maybe?)
    And what about the Gaming Edition, what percentage can achieve in idle and what rpm?
    Thanks in advance

    E-mil, please don't hijack other topics but open an own for your query. >>Please read and comply with the Forum Rules.<<
    -- TOPIC LOCKED --

  • Msi gtx 560ti hawk twin forzr 3 temperature going very high!!

    hello guyz...
    i want help regarding my graphics card
    i have gtx 560ti hawk
    when i play crysis 2 or BF3 on full gfx (my card is capable of that) the temperature goes 85+ this is making me worry....is that temperature o.k for this gfx card or is it faulty?
    my room temp might be 25-30....
    HELP ME!    :(

    Quote from: Svet on 10-October-11, 21:01:50
    Also see here as well if you want to reapplty the TIM, which can help with underload temp:
    https://forum-en.msi.com/index.php?topic=152048.msg1129107#msg1129107

  • MSI R9 270X Gaming - custom fan profile - BIOS editor

    I have R9 270X Gaming.
    I just want to know, is it possible to edit and flash BIOS by myself, only with new fan profile?
    Can I do that with VBE7?
    I don't want to use Afterburner, or other programs for custom fan profiles, because it crash my online games.
    Mostly play BF2 BC Vietnam and FarCry 3.
    Thanks

    Quote from: mkowalm on 02-August-14, 20:02:01
    Hi !
    I'm searching for a new bios for my card. I think my is too old  (standard bios)
    270X Gaming 2GB
    S/N: 602 - V303 - 070B1404002854
    Current bios --> www54.zippyshare.com/v/76324565/file.html
    No, your vbios is not too old. It is the latest UEFI vbios (TV303MH.102).

  • MSI R9 270x HAWK "malfunction"?

    Hi, I have owned this graphics card for the last 4 months and its always worked fine apart from getting bluescreens due to html5 videos (other people have the same problem).
    Today while playing BF4 the screen started flickering until it turned kind of red and black so I
    1. Restarted the PC and everything was fine until it got past the point where it asks if I want to boot into safe mode, after that the screen would turn black and nothing would happen, it did boot into safe mode so I thought it might have been some driver that got corrupted.
    2. I decided to install windows 8.1 and then when I went into internet explorer it crashed (this was after quite a few minutes of using the pc) then I restarted and it crashed even sooner.
    3. Took the gpu out, reset the bios and everything was fine. Then I downloaded the drivers.
    4. put the gpu back in and tried to install the drivers but halfway through it crashed again. Now im using the gpu but its not actually working, I think its just going through the gpu to the cpu graphics card.
    Was wondering if there is a fix for this or if I have to RMA it (been 4 months since I bought it so I doubt I can RMA it with scan, that's why I'm posting here).
    Thank you, John
    Edit #1 - I technically didnt buy this since Scan replaced it for a gigabyte r9 270x windforce

    Hi, the bios version I put was actually wrong, its actually the latest update called "F11a".
    The gigabyte card completely stopped working and they told me they found a problem in the card itself.
    edit #1 - http://www.ebuyer.com/386271-gigabyte-ga-z77-ds3h-socket-1155-vga-dvi-hdmi-7-1-channel-audio-atx-motherboard-ga-z77-ds3h this is the motherboard I have

  • Re: [REQUEST] UEFI / GOP vBIOS for MSI R9 270X Hawk 2G

    Thank you anyway.

    Quote from: huijbers on 30-July-15, 18:46:16I really miss loudness in Nahimic. My wireless card broke and I had to send in my gs60, it came back factory resetted and with bios and firmware and stuff updated. The firs...

  • MSI R9 270x hawk

    Hi,
    6 Months ago i bought this Graphic card and in those months i've been playing low graphics games like Contract Wars (facebook game), the graphic suddently started to show signs like freezing, artefacts (yes i've already tried new drivers), so when everything else failed i went to tomshardware to ask their opinion and i found out this is actually common and what was told me was that the graphic card was showing signs of dying. Since this is one of your products i would like to know what do you have me do to fix this problem.
    vbios
    filedropper .com/pitcairn_1

    Quote from: flobelix on 22-May-14, 00:21:03
    Follow >>Posting Guide<< for assistance.
    Nope it doesn't void warranty but don't flash to anything you find on the internet. You will be provided OFFICIAL one through here, but I don't think it will change anything if it started to happen suddenly.

Maybe you are looking for

  • Export data to Excel

    Hello All,             I am trying to export data to Excel from a report output. Its a simple report. I have tried the below FM CALL FUNCTION 'RH_START_EXCEL_WITH_DATA' EXPORTING   DATA_FILENAME             =   DATA_PATH_FLAG            = 'W'   DATA_

  • Link to... changed name

    Is there a way to shut off the "feature" that when you link a text button to a menu (or asset) that the text button changes it's text to the menu's name? I create many of my menus in Photoshop with the text just as I want it. When I use Encore to lin

  • Installation of EPM 11.1.1.1.0 - hints and pitfalls

    Hi EPM 11.1.1.1.0 installer guys , First of all I would like to note that I have spanned a lot of hours during the last weeks in trying (and failing) a successful installation of EPM 11x. I will not talk much about the first version - forgot about it

  • How does cyrus flag the state of  mail and can we preserve this ?

    When I restore an e-mail account the user gets his mail as unread What i am saying here is We use imap accounts and I had to restore the mail from a backup, all the users got there mail back, but all as unread including the folders they created. it w

  • Getting the Id after commit

    hi all I'm new on ADF first OperationBinding operationBinding = getBindings().getOperationBinding("createInsert"); operationBinding.execute(); then operationBinding = getBindings().getOperationBinding("Commit"); operationBinding.execute(); I have to