MSI R9 270x OC edition 4gb - black screen after windows logo

Good afternoon,
I am the proud owner of 2 x MSI R9 270x OC edition 4gb cards, One is working a treat, the other is not.
When I use on of them, I get the boot screen (the one with the option to go into the BIOS), then I get the Windows logo, then nothing but a black screen, output from the card is detected by the monitor (green light at the bottom instead of stand by) but nothing else. the other card works perfect on its own.
They are both detected when I run windows in safe mode.
This also happens if I run crossfire on both cards.
SN/ 602-V303-095B1312011152 (this is the good one)
SN/ 602-V303-095B1312011157 (this is the bad one)
Could this be a BIOS issue?
Main Board: ASUS P8Z77-M PRO
Bios Version:Version:
Video Card: msi R9 270X OC edition 4gb
PSU: XFX750 pro
CPU: i5-2500K CPU @ 3.30GHz
Memory: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
SSD/ HDD: 120GB SSD, 1TB HDD, 150GB HDD
CPU COOLER: Cooler Master Hyper 212 EVO
Operating System: Win 7 Ultimate 64bit

Quote
When I use on of them, I get the boot screen (the one with the option to go into the BIOS), then I get the Windows logo, then nothing but a black screen, output from the card is detected by the monitor (green light at the bottom instead of stand by) but nothing else. the other card works perfect on its own.
you mean when you use one of them only or?
Quote
This also happens if I run crossfire on both cards.
SN/ 602-V303-095B1312011152 (this is the good one)
SN/ 602-V303-095B1312011157 (this is the bad one)
can you save and upload both vbioses and give a link to it?

Similar Messages

Acer XB270HU black screen after windows logo for about 20-30 seconds

Hi all,On a fresh and fully up to date OS (Win 7) with 2x GTX 980 Ti I have an issue where the screen goes black (No Signal) just after windows logo. Im using UEFI SDD boot flow, have secured boot disabled. Im connected with DispayPort 1.1 (not sure if that matters). This issue did not occur after getting to Windows just after the reinstallation of the OS (no drivers, no updates). It started to occur after the OS got fully up 2 date. Any ideas? As Im losing 30 seconds on boot-up with UEFI so it feels like IDE....

I also have the same issue, it only started a few days ago and ive had it for 2 weeks. Sometimes when I start up the computer, it will say no signal and my secondary monitor will turn on and take its place as the primary monitor. A restart will fix this issue, but then my Acer goes black, says no signal, comes back at a resolution of 600:800 and then 1920:1090, and changes again to its native 2560:1440.
Not to mention G-SYNC does not work at all on my monitor. I can't beleive they charge $1,000 for this extremely mediocre at best monitor

Black screen after windows logo problem

Hi people, i have the HP Probook 4530s LH306EA and i have been using it for 3 years without any problems but this week after i did a restart on my laptop i got a black screen after the windows logo.
The problem is whenever i install the AMD Display driver it says that there were some errors during the install and the pc freezes and restarts into a black screen...
AMD Display drivers 13.152-130830A-162882C(18 Oct 2013)
Windows 8.1 64bit
Is there any solution to this or some other drivers?

you wouldn't by chance be attempting to use a Sandforce controller using SSD?
please list your components >>Posting Guide<<!
See my signature below for guidance
--------------------vvvvv--------------------

V570 black screen after windows logo

Laptop worked fine till yesterday evening, after that when I power on the laptop, during startup I get windows repair screen and it's ran for 1 hr and then it restarts laptop by itself, from then on after I power on the laptop after initial windows screen I get black screen. I tried take out battery, press power button 30 secs and start again... Nothing worked yet.
Any idea to resolve the issue. Thanks.

Dear Rocky
Welcome in lenovo community
We recommend to perform the recovery as last option , please let me us know if you are not aware with the recovery steps
Waiting your kindly reply
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Black Screen after windows logo

Good evening. So i got a bit angry and kinda hit my laptop...then the screen had some green lines on it so i switched it off, after that after switching it back on the screen goes black after the windows logo i am only able to see the cursor. If i use safe mode it works. So i don't know what to do. Thanks in advance guys.

Hi,
At this point, my best guess would be a problem with the HDD. This would be consistent with damage following an impact and with the notebook being able to start in safe mode ( less read/write load ) - it would also explain why the uefi diagnostics throw an error as it needs to access to the HP_TOOLS partition.
When in safe mode, you could try disabling all start-up items and services ( apart from Microsoft services ), then reboot and see if it will load any further - if it does then manage to load the OS, this would tend to confirm that the issue is with the drive and it'll need to be replaced.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MSI R9 270X - Black Screen after Win7 logo

Hello there.
About a week ago I upgraded my PC, buying several components and putting it to work. Here's the specs.
Main Board: M5A97 EVO R2.0
Bios Version: Latest
Video Card: MSI Radeon R9 270X TwinFrozr OC Edition 2Gb
PSU: Don't know
12v rail Rating of listed PSU:
CPU: AMD FX 8350 4.0Ggz BE SkAM3+
Memory: 8Gb Crucial Ballistix DDR3-1600Mhz
SSD/ HDD: Western Digital WD10EZRX-00A8LB0 1TB
CPU COOLER: The one that came with the CPU
Raid Card: Onboard
Sound Card: Onboard
OC: (Yes / No) Don't know
Operating System: Win 7 SP 1 64
So, it worked just fine for about 3 days. Last Saturday night I tried to open Google Chrome after some gaming and the the system froze. I got a screen with vertical black and white stripes. I had to reboot the system and it gave me a black screen, crashing again, after the Win Logo at start up. At this time I was running either 14.7 or 14.9 ATI drivers.
I could only start the PC on Safe Mode. Removing the drivers and getting Windows general VGA card settings would allow me to use Windows in normal mode though. Once I installed the Graphic Card's drivers it crashed on reboot, always with the black screen after Win logo. I installed several ATI drivers, namelly 14.9, 14.11 beta, 13.12... and nothing worked.
I flashed the Mother Board BIOS to the latest version, formatted the HDD doing a fresh install of Win 7, installed Catalyst first and then the drivers, the drivers without catalyst, etc. and nothing worked, always getting a black sreen on reboot once the Graphic Card's drivers were installed. I even swapped the Graphic Card to a different slot to no avail.
Right now I'm using my old Radeon HD 5670 with the latest drivers and everything works just fine. It even works fine if I keep both Graphic Cards installed with the monitor plugged to the older card. I find this odd since to do so, Windows loads both cards drivers with no errors. But once I switch to the new card everything goes black.
Can someone help me out? I've tried to contact my vendor's technical support through mail but they're not answering. I fear that I'll have to report it as DOA and swap it out, which will take quite some time taking into consideration the way things tend to work around here.
EDIT - I don't have a 2nd system to test it on.

Nope. Not driver issue at all. I tested at least 3 different drivers, all with the same result. Besides, I used both Driver Fusion and Driver Cleaner and CClean to remove any non-deleted registry entries. Always got the same problem. Went as far as formating the drive and doing a clean Win install. The problem persisted.
Tried installing drivers without Catalyst to no avail. Tried installing Cataltst first and then the drivers. Nothing. It always crashed omce the drivers were installed.

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

GTX670 - Signal lost/black screen after windows loading icon

Hello,
I hope I am posting this in the correct forum area. If not I do apologize.
Here are my specs:
Board: MSI Z97-G45 Gaming
Bios: ?? whatever pre-installed on mobo
VGA: MSI GTX670 OC
PSU: Corsair HX750 750W
Intel Core i7-4790K
MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
COOLER: Corsair Hydro Series H60 Water Cooler
OC: no overclocking done by me..default settings
OS: Windows 7 64bit Professional
So to keep this as direct and as short as humanly possible here is my situation.
Had a gtx670 card that I had to send back to MSI under RMA. They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug). Last night I removed temporary old card (9800gt) and plugged in new 670gtx. Things seemed to be ok, reinstalled driver after card was recognized. Played one round of Battlefield 4 for testing purposes and all seemed good.
Upon exiting the game things went south in a hurry. Moving the mouse cursor around was extremely slow and choppy. Mouse clicks were not recognized. I could not bring up ctrl-alt-del to get to task manager. At this point the cursor turned to spinning circle as if things were happening. However, after 5+ minutes of nothing changing I did a hard boot.
Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen. This was with the SSD. I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
I can load into Safe Mode with no issues. In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers. The moment I load the Nvidia drivers and restart the computer I then have the issue again. This happens with both drives.
I have reset the video card in the PCI-Ex16 slot and still received the problem. I have tried a different PCI-Ex16 slot and still had the issue. I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives. I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
I'm at a loss at the moment. I think it's the drivers, but could it be the card?
Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers. Could it be as simple as uninstalling or unchecking that particular driver?

Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card. I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
At this point I feel like it has to be the card. The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
What I have done:
1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
4) Flash updated the BIOS on the motherboard to the latest version. No success.
I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD. The problem happens on both drives. Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
I will be sending the card back today on another RMA.

Black Screen After Windows 8 64-bit Upgrade (Clean Install) on TouchSmart IQ508A (IQ500 series)

Hi there,
Just installed Windows 8 and am getting a black screen after booting up like many others. I currently have disabled the graphics driver and this has solved the black screen issue but I can no longer use my web cam for Skype (although web cam works for W8 Camera App oddly).
To date I have tried the following:
Loading up the latest Nvidia drivers from the Nvidia website
Attempting to use the drivers for Windows 7 both in compatability mode and normally. I unzipped SP44488 to get this working
I know many others are having this problem so I really would like someone from HP to respond and state whether a Windows 8 display driver for the Nvidia GE Force 9300M GS is being developed.
I ran the compatability wizard prior to the clean install and it came up with no issues so I am very disappointed I am having these problems.
I've found out that HP have a customised version of the above card so that explains why the Nvidia drivers dont work so I believe HP is therefore obligated to provide a driver.
If anyone else is having similar issues please respond as this will hopefully lead to more action.
cheers
Steve

I'm in the same boat. On my IQ804, the Nvidia GE Force 9300M GS card crashes when I use NVidia's latest Windows 8 driver and Microsoft's LIVE UPDATE drivers. I have to resort to the Standard VGA driver in order for the pc not to crash into a black screen.
I read on another forum you can try installing a July 2012 version of the driver from NVidia and that should solve the problem. I tried it once. Using the July 2012 version, the screen would stay on longer, but eventually it crashes into a black screen...but definitely more usable than the latest from NVidia and Microsoft.
I too have heard that HP used a customized version of the graphics card and that's why neither HP nor NVidia's drivers work.
I also tried installing the Nvidia GE Force 9300M GS drivers for Windows 7 that I downloaded from the HP website. It didn't work either. It actually failed to install altogether, saying my system is incompatible.
As is, the pc works fine. But videos and games that require motion is noticably choppy.
Any help from HP??

Aspire R7 572G having a black screen after windows 8.1 update. What should I do

Hi all, Im wondering, anybody encounter this problem before, Im having trouble with this black screen after boot, it happened yesterday I think microsoft must have updated some of the drivers rendering my screen black after booting. Initially i thought it was my SSD but it turns out i can enter into Safe Mode. I read more about this problem related to other PCs, and try the recommended method of "disabling" the Intel GMA HD drivers. It worked, however, it only means the primary driver is now reduced to a standard video graphic card with limited vram. I have tried rolling back and even redownloading then reinstalling the intel driver into the version VGA_Intel_9.18.10.3215. The blackscreen after boot still occured. Did i miss something?

that's an old version of Intel drivers. try this, after uninstalling the old Intel driver:http://global-download.acer.com/GDFiles/Driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=635194016643160700&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%20R7-572G&OS=81P1&LC=en&BC=ACER&SC=PA_6

Black screen after windows auto update

New laptop in use for 3 weeks. After Windows auto update restart I get to splash screen and am able to enter Windows password to log onto desktop. After successfully entering password I am not able to view my desktop; I get the black screen with cursor function; cursor disappears when moved within an inch of left or right of screen (seems to go behind something). I believe I am at the desktop but just not able to view it, because I receive app popups on the black screen (need to update McAfee, etc).
In safe mode I restored to pre auto update date; manually installed all Windows updates; worked fine until NEXT auto update, same problem.
Graphics Card: Stock Intel HD Graphics
Monitor: Generic PnP
Why would it be fine with the manual update and not after auto update?
I do not have an external monitor to attach this laptop for diagnosis. I have run windows partition checks and hard drive partition checks with no issues to resolve.
I did get an error message once when running a diagnosis (can't remember which) : Windows Update Error 0x80070490
No real luck finding anyway for me (the average Joe) to resolve this issue.
If this is a harddrive issue I don't want to keep pussyfooting around while my warranty window shrinks.
I have downloaded driver updates from HP, but cannot get the Synaptics Touchpad driver to download. I don't think this is my issue though.
I am going to manually update all my drivers then manually update Windows. We will see what happens on the next auto update.
Please advise if this is an issue I need to just give up on and return this laptop for replacement. It seems like this is not a completely unheard of issue, but I'm shocked at what we are asked to do to attempt to resolve it. Out of my depth.

Hi @Justanothermom
Welcome to the HP Support Forums!
I understand that you are having troubles with a black screen after an update. I am happy to help you with this.
Firstly, there is nothing wrong with modifiying your update settings. I was going to suggest it myself as I read through your post, and then saw you ask the question. Sometimes updates can have unintended results by the creator. With all the different combinations of hardware, and the fact that updates come from different sources, it is one of those things that is hard to completely control.
Please see the following for how to make adjustments to your update settings.
Turn automatic updating on or off - windows.microsoft.com
Or if you know which update seems to be causing the issue you can take a look at this page:
win 8.1 August 12 updates - black screen after 2nd reboot - answers.microsoft.com
Let me know if this helps at all.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Qosmio F60-11C - Black screen after Windows 7 Directx11 Update

Hello,
Two days ago I updated Directx version because that i want to try Call of Duty Black Ops on my notebook. I updated normally and it works perfect but after a day, on Windows7 reboot, after Windows 7 logo, i have a black screen and cpu fan works at full speed. So i used Toshiba Recovery Center and i recovered my pc to fabricate settings. When it installs drivers it crashed on Graphics driver again. After that, i installed Windows 7, but im using my computer on 640x480 resolution with 8-color.. And i can use Security mode with network but if i install GT-330M driver and reboot computer, it crashes on after windows 7 reboot.
I have tried to change options in the bios but it's always the same problem.
*My Graphics card :* Nvidia GT330M
*Bios Version :* 2.50 / EC2.40 (last update on Toshiba website)
*Nvidia Driver :* 260.64
I downloaded 197.16, 197.71, 258.80 drivers from Nvidia and laptopvideo2go, but when i try to install these versions, it says not compotible with my system settings.
Im totally crushed now and i dont wanna give my laptop to Toshiba Technical Service which is in Turkey. For Easy solution they spent 30 days..
Do you have a idea?
Thank you in advance
Aras.
Message was edited by: araskalyoncu

> {quote:title=PauPau wrote:}{quote}
> > I used Toshiba Recovery Center and i recovered my pc to fabricate settings
> What happens then?
> Do you have any problems after installation the OS from recovery disk?
>
> > When it installs drivers it crashed on Graphics driver again
> You dont need to install any drivers after installation from recovery disk. The recovery disk installs Win OS and also the necessary drivers!
>
> > I downloaded 197.16, 197.71, 258.80 drivers from Nvidia and laptopvideo2go, but when i try to install these versions, it says not compotible with my system settings.
>
> If you want to install non-Toshiba drivers, then you have to do this in device manager.
> You have to use the advanced installation procedure and have to point to the driver files (ini files) which you have downloaded and stored on the HDD.
> You have simply force windows to choose this driver.
I had same problems after installation the OS from recovery disks. It wont open after installed graphic card driver.
I forced windows to install alternative drivers but again it wont work.
> {quote:title=PinkPanther wrote:}{quote}
> Hi buddy,
>
> How do you install the drivers? Do you remove the old driver first before you install the newer version?
> Normally you should remove the old version first and then run CCleaner to clean the registry from old driver files in registry. Furthermore make always a restart between these steps.
>
> Last but not least Im not wondering that laptopvideo2go driver dont work because nobody has tested these drivers. The installation happens on your own risk.
I installed the drivers as same method that u said.. it wont work..

Black screen after windows 8.1 update

Hi. I updated my laptop from windows 8 to 8.1 and when it restarted it just shows a black screen. I restarted the computer and ran an HP diagnostic test and got this reading: smart check failed, failure Id: rlh2tk-6jx75x-mfgjw1-60b603 product id: d1e80ua#aba. Please help!
This question was solved.
View Solution.

lletram18 wrote:
Hi. I updated my laptop from windows 8 to 8.1 and when it restarted it just shows a black screen. I restarted the computer and ran an HP diagnostic test and got this reading: smart check failed, failure Id: rlh2tk-6jx75x-mfgjw1-60b603 product id: d1e80ua#aba. Please help!
Hi
It indicates your hard drive is facing iminent failure/has failed.
You have to replace the HDD, contact HP in your region for replacement if you're covered under warranty.
Please also read the following article:
HP Notebook PCs - SMART Hard Disk Error
Its recommended you back up all your files, programs on to a external HDD or disks.
If you have not created a recovery disks yet, You can order a replacement set of Recovery Discs using the link below - these will reinstall the operating system, all required drivers and nearly all of the original software ( the exception often being trials of MS Office ). They will also re-create all the original partitions, including the Recovery Partition.
Order HP Recovery Discs.
Hope this resolves your cpncern
thanks,
***CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM ***
***CLICK KUDOS IF YOU APPRECIATE MY REPLY***
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Please Help: iMac black screens after startup logo + spinning wheel no cursor).

Hi, guys.
I'm in a fair bit of a desperate situation; my iMac's screen seems to shut down every time after the white startup screen. The Apple logo appears, & the progress wheel begins spinning, then after a while - when it would usually then go to the gray login screen - it would, instead, go black. I can tell that the machine is still on (I can still hear it clicking as it does during processing) but I'm unable to determine anything else. Nothing is visible on the screen - not even the cursor - it's as if the display had turned off completely. I'm not sure if the login screen sits beneath that black screen (I have tried to log on by typing my login details in blindly, but even if it does log in, it's hard to determine what state the computer is in without seeing the screen.
I have tried the PRAM reset (holding CMD+OPT+P+R) during both the white startup screen, & the black screen to no avail. It seems unresponsive because I don't hear any additional chimes that I've been told should be heard during a PRAM reset attempt. I can't even be sure that the command is being inputted correctly because the light on my wireless keyboard remains off during the process.
I've tried rebooting over & over again; the results are the same.
The steps that led to the problem occurred thusly:
1 - I was trying to clear some memory from my current session, so I scanned through my active processes, quitting anything which seemed to be eating up considerable amounts of memory.
2 - One particular process I quit was 'launchd' which was functioning under my profile username.
3 - After quitting launchd, all opened apps seemed to close, & it looked like I was forcibly logged off the machine. The screen froze during this point, & I decided to do a hard reboot to log back in.
4 - The problem began after this hard reboot; startup seemed to occur as per usual; white screen > apple logo > progress wheel > and then suddenly, a black screen where the login screen should be.
I've shown a flashlight into the screen while it's black & it seems well & truly like the display has shut down while the iMac continues in the background. I have had issues relating to my screen going black before, but they were random & intermittent; they didn't occur without fail during the exact same time immediately after startup, & could be remedied by using the CTRL+OPT+EJT keys.
I am on an iMac 2010, 27", using I believe Lion OSX. I am unable to recall additional specifications while the problem persists.
Could anybody please help me? I'm quite desperate; I was in the middle of some urgent work that I need to get back to as soon as possible.
Thank you I'm advance to anyone with advice on how I can go about fixing this.
,c.

Gray screen appears during startup

BLACK screen after hp logo

Hi. Im having problem on my laptop after turning it on it goes to hp logo but then black screen. I can use it to go to f11 and pick option but when i try to restart it on normal on safemode it deosnt show any .please help

Hi there @Xia14
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your computer is not starting up properly. I am happy to help with this. Please post the full product number for your notebook. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
Were there any recent changes to your system? Driver updates, software installs, new hardware?
As a start, please take a look at the following and give it a try.
HP Notebook PCs - Computer does not start (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

MSI R9 270x OC edition 4gb - black screen after windows logo

Similar Messages

Maybe you are looking for