Msi R9 280x Bios Question

Hello, i have this card and the temperatures are really hot, so maybe i need upgrade my Bios?? ( have the retail since i buyed )
Temps Idle: 40°C to 50°C
Temps Playing: 85°C to 90°C ( Depend of the game )
so , what bios i need? see changes upgrading Bios?
Versión del BIOS   015.040.000.000
Número de parte de BIOS   113-C3865000-G77
Fecha de BIOS   2013/10/09

you have to send it back to MSI or reseller
checking an review of the same card here:
http://www.guru3d.com/articles_pages/msi_radeon_r9_280x_twinfrozr_gaming_oc_review,9.html
max recorded load temp 68C

Similar Messages

  • MOVED: Msi R9 280x Bios Question

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=254734.0

    you have to send it back to MSI or reseller
    checking an review of the same card here:
    http://www.guru3d.com/articles_pages/msi_radeon_r9_280x_twinfrozr_gaming_oc_review,9.html
    max recorded load temp 68C

  • MSI R9 280X dimensions question

    Hi,
    I am having a serious problem with my Micro ATX case (Lian-Li PC-V355) trying to "squeeze" a high end card inside it.
    So far I have tried Asus DC2 Top 7970 and MSI Lightning GTX680 without success. Both of these cards were two thick (or too tall for me) with dimensions 129,54 and 129mm respectively.
    I really want to buy the MSI R9 280X but I fear its width will too high for my case...
    Can anyone explain to me how they calculate the width? From which part of the card do MSI start counting?
    Thank you in advance
    Yannis

    Quote from: yannis76 on 04-November-13, 14:26:12
    Is it possible for someone from MSI to tell me the actual width from the PCB to the end of the cooler?
    I am asking this because In my case there is about 20mm free space from PCB and upwards.
    Thank you in advance
    Yannis
    >>How to contact MSI.<<

  • MSI R9 280X BIOS REV?

    Hi looking for a a bios which allows voltage unlocking
    MSI R9 290x GB
    s/n 602-V277-250B1404009613
    bios 015.042.000.000.003435 (113C865000-O77)
    Are there any bio's for this card which allows voltage adjustment?

    Quote from: shaqeeldonaldson on 17-May-15, 03:00:43
    https://www.dropbox.com/s/2x23yh0ux4h1kv0/Tahiti.rom?dl=0
    [ ERROR: SPECIFIED ATTACHMENT MISSING ]
    update is available https://forum-en.msi.com/index.php?topic=254453.msg1462441#msg1462441

  • MSI-6730 SIS655 Bios question?

    I recently purchased the MSI6730-SIS655 mobo
    I set the cpu/clock setting to auto, when it boots
    it says ",1.2mhz".
    If I try to set them manually here are the options
    under the multiplier settings.
    H/W Trap
    H1.0x
    H2.0x
    H3.0x
    H4.0x
    H5.0x
    H6.0x
    H7.0x
    H8.0x
    H9.0x
    I0.0x
    I1.0x
    I2.0x
    I3.0x
    I4.0x
    I5.0x
    0.0x
    Are these normal?  I was expecting to see:
    1.0x
    2.0x
    thru like 26.0x
    I flash the BIOS, but still got same result.
    I have a P4 2.4
    Thanks for any help.
    Mike
    I am about to take it back, but thought I try here first.  

    If you can return it that would be the best choice.  That mobo has a lot of problems, just look at all the posts.  Not all MSI fault.  Other brands with that same SIS chip set have similar problems.  The problem you are having looks like they left out the multipliers in the bios because all production intel cpu are locked so there is no use for them.  The unlocked cpu like you have are so rare it is hard to tell which boards have multipliers (hit or miss).  I think you would have better chance with intel chip set based boards but am not sure.  If you are looking for a high end board the canterwood chip set looks real good.

  • Msi 290X Gaming Bios question?

    I just got a used 290X Gaming for $350 off Amazon. Do the 290X boards usually already come with a UEFI bios or will I have to request it?
    Thanks....

    The 4G Gamings Bios switch is at the top of the card near the external connectors, the uefi mode bios is the "2" position on the switch, which is toward the rear/power connectors position. Its a pretty tiny switch so make sure your careful and have a good light.

  • Msi R9 280x Gaming oc edition included BF4 Limited Edition "Bios question"

    Hi,
    i have some question regarding the bios from this card "Msi R9 280x Gaming oc edition included BF4 Limited Edition"
    i have 2x "Msi R9 280x Gaming oc edition included BF4 Limited Edition" Cards serielnumber one is : 602-V277-28SB1311072568 and the serielnumber two is : 602-V277-28SB1311073312
    Because i have a small problem !
    my first question is what is the newest bios version? because i find in Reviews pages from this card there are always other bios versions than my!
    my bios version is: 015.040.000.003.003435(113-C3865000-G77)
    some Reviews pages have: 015.040.000.000.003435(113-C3865000-X77) or 015.039.000.001.003331(113-C3865000-M77) or 015.039.000.001.003331(113-C3865000-G77)
    why I ask you here ?
    1. with afterburner I can not change the voltage (field-locked)
    2. simply if I am uptodate with the bios ?
    next question is :
    when i save my bios with GPU-Z and have the small switch (on the card) on "1" .....then is this bios a "UEFI image"
    when i save my bios with GPU-Z and have the small switch (on the card) on "2"......then is this bios a "legacy image"
    i check it with VBE7.0.0.7b!
    now my question is why is that and on what I should make it if I don´t use UEFI system? please help me
    my system !
    OS: Windows 7 64bit
    Mainboard: Asus M4A87TD EVO <--- that board don´t use UEFI !
    summary!
    need the newest Bios version !
    Why can´t change the voltage with afterburner ?
    why switch 1 is  "UEFI image" and 2 is  "legacy image" ?
    and when i flash to the new bios version which switch I need to use ?
    when you need other informations from me let me know !
    ps: sorry form my bad english but i gave my best i hope you can help me ......thanks in advance

    Quote
    my first question is what is the newest bios version? because i find in Reviews pages from this card there are always other bios versions than my!
    my bios version is: 015.040.000.003.003435(113-C3865000-G77)
    some Reviews pages have: 015.040.000.000.003435(113-C3865000-X77) or 015.039.000.001.003331(113-C3865000-M77) or 015.039.000.001.003331(113-C3865000-G77)
    why I ask you here ?
    None of that is a bios version. We need a link to a copy of your vbios saved to file and uploaded to a file hoster to check if there is a newer version. If not allowed to link yet add a break to the link so it is masked being a link.
    Quote
    1. with afterburner I can not change the voltage (field-locked)
    Others reported that too when using the same card. If unlocking won't work (>>How to use MSI Afterburner<<) contact MSi about it as there seems to be an issue: >>How to contact MSI.<<
    Quote
    next question is :
    when i save my bios with GPU-Z and have the small switch (on the card) on "1" .....then is this bios a "UEFI image"
    when i save my bios with GPU-Z and have the small switch (on the card) on "2"......then is this bios a "legacy image"
    i check it with VBE7.0.0.7b!
    now my question is why is that and on what I should make it if I don´t use UEFI system? please help me
    UEFI is aGOP compliant vbios that allows to use secureboot/fastboot (Windows 8/8.1). If not using UEFI booting it doesn't matter which you use. Older mainboards with UEFI but not being GOP compliant on the other hand won't work with a GOP vbios and only the legacy vbios allows to use the card.

  • Latest bios for MSI R9 280x

    Can you tell me the latest bios for msi r9 280x ? the attachment hows my current bios.

    Quote from: moblawski on Yesterday at 15:54:05I&#39;ve had this issue before, but not on  a MSI laptop.
    The solution or problem was, that the memory timings set by the controller, was to low compared to manufactures.
    Now ...

  • "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G

    "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
    S/N: 602-V277-310B1407096530
    Installed BIOS: TV277MS.3A0
    Hi,
    I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
    I have to use "Legacy" mode because of my PC does not start otherwise.
    Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
    Thank you.

    here is .3A1
    TV277MS.3A1 legacy
    TV277MH.3A1 uefi
    flash guide:
    Quote
    Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
    Rename TVxxxxx.zzz to zzz.rom.
    Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
    on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios.

  • MSI R9 280X - Latest Bios

    I would like the latest BIOS for my MSI R9 280X.  The serial number on the card is 602-V277-28SB1311051155.
    Thanks...

    Use >>this<<

  • [Request] Unlocked voltage control BIOS for MSI R9 280X

    Hi,
    I want change voltage on my MSI R9 280X GAMING 3G BF4 as its running very hot.
    I have two more and same issue, VRM gets very hot (hwinfo read).
    My S/N #: 602-V277-28SB1311070619
    Thanks!
    BR

    Thank you very much Svet.
    Can you provide latest BIOS for my other 2 MSI R9 280x?
    S/N: 602-V277-28SB1311070619
    BIOS: https://drive.google.com/file/d/0BzCIzFJU4_xTWHpOZ2tMbkVVVlE/edit?usp=sharing
    S/N: 602-V277-28SB1311070561
    BIOS: https://drive.google.com/file/d/0BzCIzFJU4_xTZ296WVlLbVJNUzA/edit?usp=sharing
    Thanks once again.
    BR, Nikola

  • MSI R9 280X - Latest Bios Request

    Dear Moderator
    I would like the latest BIOS for my MSI R9 280X Gaming BF4 LTD
    The serial number on the card is 602-V277-28SB1312058975
    MSI Live update reports
    Graphic card BIOS version:   TV277MH.330
    BIOS Date:        2013/10/28
    Thanks in advance

     

  • MSI R9 280X GAMING 3G bios

    Hello, I've recently bought an MSI R9 280X GAMING 3G video card and so far it works very well without any problems. However, having read some pretty nasty things about it overheating, coil whining, and fans going all wrong, I thought it might be a good idea to update vbios.
    According to GPU-Z my current one is 0.15.040.000.003.003435 (113-C3865000-G77)
    Is there a later version of bios for my GPU? Because MSI Live Update says no. Thanks in advance 

    Quote
    and so far it works very well without any problems. However, having read some pretty nasty things about it overheating, coil whining, and fans going all wrong, I thought it might be a good idea to update vbios.
    If all is fine there is nothing to do. Either you have problems or not. These issues won't appear suddenly.
    Quote
    According to GPU-Z my current one is 0.15.040.000.003.003435 (113-C3865000-G77)
    That information is useless. We need your card's S/N and a copy of the current vbios. However as said above if everything works don't bother with updating vbios just to update.

  • Need UEFI/GOP Bios MSI R9 280x Gaming Bios1/2 no Gop

    Hi Hallo!
    Please UEFI/GOP Bios for MSI R9 280x Gaming (Ultrafast Boot Win 8.1)
    serial number:  602-V277-19SB 130 90 97 395
    Bios: 015.039.000.001.003331 (113-C3865000-G77)
    Bios1 and 2 - no gop bios - Ultrafast Boot do not work
    thanks 

    There you go: https://forum-en.msi.com/index.php?action=dlattach;topic=173931.0;attach=12208
    Eventually that is not even needed. it should be possible to switch between two versions with a hardware switch and one should be GOP compliant.

  • Bios update MSI R9 280X

    Hi I notice my msi r9 280x graphic card GPU clock doesn't boost clock to 1050mhz speed instead it always stay same at 1020mhz clock speed when i play games. how come boost feature isn't working?
    Maybe i need the latest bios ? if so how do i update my bios?
    GPUZ showing my bios is: 015.040.003.003435 (113-C3865000-G77)
    My graphic card Serial number: S/N: 602-V277 - 28SB1311071923

    >>THIS<< is the latest GOP vbios you may try it. Still that might not change it. 1020Mhz is Game mode while 1050Mhz is oc:
    Quote from: http://www.msi.com/product/vga/R9-280X-GAMING-3G.html#overview
    1000MHz Core (Boost Clock:1050MHz) (OC mode)
     1000MHz Core (Boost Clock:1020MHz) (Gaming mode)
     1000MHz Core (Boost Clock:1000MHz) (Silent mode)
    Use the >>GAMING APP<< to switch to oc mode and retry.

Maybe you are looking for

  • How do I transfer photos from 'iPhoto Library' to external HD?

    Hello everyone.  I have an iPhoto back up question for you all.  I've recently had severe troubles with my 2010 21.5 inch iMac.  After an OSX update, the system suffered all kinds of problems, and I am unable to even open the majority of my apps with

  • Re-installing iPhoto '08 after "fresh" Snow Leopard install.

    Sorry if I'm beating a dead horse here, but I keep seeing conflicting info on whether or not one can, or should, do a drag-drop of iPhoto from one volume to another. Here's my story: I had an older version of iPhoto on my iMac. I bought a MacBook in

  • How to cancel SO

    hi friends, i have a thread i am not able to cancel SOs of third party sales,which was created in the year 2000-2001 by that time the version was 4.0 but now it upgraded to 4.7 when i try to delete the items in PO it is giving an error message no upd

  • Displaying images in VBOX mxml element

    hi, i am new to flex.i am using flex builder 3. i want to disply sime images in a VBOX element. i have image URLs and image names with me in an arraycollection. i should disply the images side by side and VBOX should have scroll bar. thanks sankar

  • Reading the ID3 tag of a mp3 file

    does anybody know how i can read a MP3 file ID3 tag??? i know the text is at the end of the file... i'm not sure if i can use a pre written bit of code that will do it or if i will have to write the code myself to back track through the file... thank