Msi Reg wrong fromat for zip code.

Iam a member of msi site I wont to reg a new motherboard and get some tech advice for the board working with command centre.
Every time I fill in my details on the site its giving me this error....
Error Number: 1366
Incorrect integer value: 'BN159BA' for column 'zip code' at row 1
So any idea what's happing ..I hope its the place to post this.
I'm in the uk so it will be mypostcode.

Thanks for your answer mate, but i am still waiting
It's a pitty as i had to return my old earphones by 12/09/12 .... and there is no way to tell apple that my new earphones are still not here

Similar Messages

Pass URL parameter for zip code

In this fake url I want to pass the zip code value of the confirmed BP into "zipcode"
https://acme.com/locator.jsp?zip=zipcode
from the other post I have read the parameter name would be "zipcode" and thru the transaction launcher I am able to assign parameter value =
//selectedClmBpLinkRelationship/BpRelLinkBusinessPartner/BuilStandardAddressRel/POSTL_COD1
The transaction launcher is opening the launcher but not passing the value into the field. The window opens but the field is not filled with the zip code.
If I open a new ie browser and put in url
https://acme.com/locator.jsp?zip=60001
the url is reached and 60001 is filling the zip code field.
Is there an easy way to debug and see if any value is getting passed?
Am I conceptually on base for what I am trying to do?

Hi Shwetha,
That got me pointed in the right direction where we could get it to work.
For others, these were some other points we used to get it to work.
1. in the IMG where the url is defined don't add the ZIP parameter here so our IMG entry = https://acme.com/locator.jsp?
when the page launched correctly the parameters showed https://acme.com/locator.jsp?&zipcode=60001
2. for zip code parameter value we used //currentCustomer/BuilStandardAddressRel/POSTL_COD1 >> this goes in the transaction launcher with parameter zipcode and is then visible in the IMG entry "copy/delete launch transactions"

Format column in Numbers for zip code

how do I get a leading zero for zip codes??

start by selecting the cell(s) yu want to format, then go to the Format menu and choose Create Custom Cell Format:
In the dialogue that opens:
Edit the name to reflect the use to which this format will be placed.
Leave the type as Numbers & Text
Note the example (orange circle) showing how a number will appear under the curent format.
Click the white triangle (see arrow) in the Integer tablet (red circle) to open the options menu.
Take three trips to the options menu:
Choose Hide Separator
Choose Show Zeros for Unused Digits
Choose Add Digit
Click OK to return to the document.
Note that this will work for the original five digit Zip codes. Extended five-four codes will be treated as text, as can be seen in the image above. and will not sort correctly (see column D of left table below). For correct sorting, format the column as text and enter the Zip codes including the leading zeros, as has been done in the single column on the right (before the column was sorted into the displayed order).
Regards,
Barry

Ion Channel not working for Zip Code 32162. Frozen Screen!

About 2-3 days ago, the Ion Channel #15 for Zip Code 32162 is a frozen screen. What's the deal. Same on all 3 TVs which have different Boxes.

TomHosken wrote:
About 2-3 days ago, the Ion Channel #15 for Zip Code 32162 is a frozen screen. What's the deal. Same on all 3 TVs which have different Boxes.
Apologies for the issue and the experience that you described above. Are you still having this issue?
I have asked a colleague to review your account and reach out to you so that we can get any underlying issues identified and resolved.
Thanks for your patience.

Bar codes for zip codes

Will Pages 09 print bar codes for zip codes?
<Edited by Moderator>

I use the free Dashboard widget, EasyEnvelopes, that can print the USPS bar code for the entered address.

Leading zeros for zip codes in Numbers

I couldn't find an answer for this question but finally figured it out so wanted to share. Here's how I got the zeros to show in my zip code column:
You can make a custom cell format from the cells palette. You have to hide the separator and add a digit using the Integers bubble. Then choose show zeros for unused digits.
Then apply this format to the entire zip code column in your doc.

I was having the same problem. You pointed me in the right direction but in 09 the prompts are slightly different.. Hilight the column. In the cell inspector, cell format, choose NUMERICAL SYSTEM and set the number of places to five.
It should now look right but before you save it, create a new column and format it as above into TEXT. Then copy the one you've fixed, and paste it into the new text column. This should save fine as cvs in any event, as well as numbers.

How to set columns for Zip Codes?

I am new to iMac and in my first week using trial version of Numbers. I work in sales and we do lots of mailings using merging of data and addresses for post cards, labels, etc.
I cannot see how to set columns to a zip code setting. All zips entered beginning with a 0 drop the front 0. I tried calling the column as Text, but it did not help. I can type a ' in from of the 0 and it works, but this takes an insane amount of time and will not work for us.
How do you deal with Zip Codes? Are there labeling options for mailing built into Numbers? I really want to dump all MS products but will have to drop mac and return buy Office if this is not correctable.
Thank you,
Brownie

Hello
Setting the column format to text do the trick on my french version too.
With AppleWorks, I was accustomed to use a zeroSlashed so it remained in my zip codes when I moved codes here and there.
Yvan KOENIG (from FRANCE jeudi 13 septembre 2007 17:44:38)

0CO_PC_10 datasource extracting wrong values for company code

Hi,
I am extracting data from the datasource 0CO_PC_10 product cost analysis and found that Company code values are wrong in the extractor checker. Company code field is taking values of Plant. For example:
if company code 6100 has got plants 6101 6102 6104, ideallly all the rows should have company code value as 6100, instead
it is taking 6101 6102 6104 which are nothing but plant values. So in both columns I am getting same values.
Is this behaviour normal for this datasource?
I have tried to check help.sap on this data source in the below link, it says company code value is extracted from AUFK table but it is not happened.
http://help.sap.com/saphelp_tm70/helpdata/en/9d/c31a8cee714393b1c75eb3e8f32a64/frameset.htm
Please suggest ideas to overcome this problem.
Regards
Sreekanth S

Hi,
Raise a SAP message there must be some problem with the Extraction logic use.
Also, in the meantime you can try debugging the program used to extract the data.
Regards,
Rahul

"file -i" and "xdg-mime" reports wrong mimetype for zip files

If I run "file something.zip" it returns "Zip archive data" as it should, but if I run "file -i something.zip" or "xdg-mime query filetype something.zip" they both return "application/octet-stream; charset=binary" instead of "application/zip; charset=binary".
I already tried to
remove /usr/share/mime/mime.cache and ~/.local/share/mime/mime.cache, then run update-mime-database on both folders
delete the whole ~/.local/share/mime folder
remove and reinstall mime-types and shared-mime-info
without any success.
I hope someone can help me on this because I've ran out of ideas.

I too got annoyed at those unreliable mime-type inspectors and went searching for a better one that used the command line. I found "perl-file-mimeinfo" which comes with a wonderful script called "mimetype".

MOVED: Did MSI posted wrong specs for the 965 neo chipset ?

This topic has been moved to Intel Core Duo and Core 2 Duo based boards.
https://forum-en.msi.com/index.php?topic=99397.0

Quote from: Maesus on 08-August-06, 23:17:20
it's only 1GB for DDR2800 per DIMM, don't go for 2GB DDR2-800 per DIMM. ok. So either you have 1 stick of 1GB DDR2-800, no problem, 2 sticks, 3 sticks or 4 sticks, no problem. Just that you cannot have 2GB of DDR2-800 per DIMM. Hope you understand.
Hey, I could use some help.
Here's what I got:
E6400 Allendale (333MHz FSB x 8 = 2.664GHz this was with the 256MB Corsair stick)
MSI P965 Neo F
X1800XT
Seasonic S12 600 watt PSU
I can't get any RAM to work with this thing. Here is what I've tried:
2GB (2 x 1GB) OCZ DDR2 PC2-5400 (667MHz) Gold GX XTC RAM
- No post. Fans on, but nothing else. Used a spare 256MB DDR2 533MHz Corsair stick of memory and everything worked.
- Tried increasing vdimm up to 2.2V still wouldn't work
- Tried using only one stick, and tried using different slots.
- RMA'd back to OCZ (per their request)
Next I tried:
2GB (2 x 1GB) Team Xtreem DDR2 PC2-6400 (800MHz uses D9 Micron chips)
- No post. Fans turn on, but I get nothing else.
Both sets of RAM have been tested on an Intel P4 540 system and work fine.
Any help would be very much appreciated.

Did MSI posted wrong specs for the 965 neo chipset ?

i notice some mistake maybe MSI mods could verify.
1) on the site it mention it will only support up to 2GB of DDR 800 rams
i think it should be 4GB of DDR 800 rams instead/
2) in the manual page 2-7, they mention it cannot support 1GB of DDr800 module
but it should be 1Gbit, i think it created some confusion.
Can anyone from MSI verify and update the site/ manual if possible
Thanks

Quote from: Maesus on 08-August-06, 23:17:20
it's only 1GB for DDR2800 per DIMM, don't go for 2GB DDR2-800 per DIMM. ok. So either you have 1 stick of 1GB DDR2-800, no problem, 2 sticks, 3 sticks or 4 sticks, no problem. Just that you cannot have 2GB of DDR2-800 per DIMM. Hope you understand.
Hey, I could use some help.
Here's what I got:
E6400 Allendale (333MHz FSB x 8 = 2.664GHz this was with the 256MB Corsair stick)
MSI P965 Neo F
X1800XT
Seasonic S12 600 watt PSU
I can't get any RAM to work with this thing. Here is what I've tried:
2GB (2 x 1GB) OCZ DDR2 PC2-5400 (667MHz) Gold GX XTC RAM
- No post. Fans on, but nothing else. Used a spare 256MB DDR2 533MHz Corsair stick of memory and everything worked.
- Tried increasing vdimm up to 2.2V still wouldn't work
- Tried using only one stick, and tried using different slots.
- RMA'd back to OCZ (per their request)
Next I tried:
2GB (2 x 1GB) Team Xtreem DDR2 PC2-6400 (800MHz uses D9 Micron chips)
- No post. Fans turn on, but I get nothing else.
Both sets of RAM have been tested on an Intel P4 540 system and work fine.
Any help would be very much appreciated.

Reg: wrong payment for leave quota

Hi,
Have a query on Employee leave quota. Employee separated with negative leave of almost 50 hrs. But got paid for this negative hrs in her first pay of rehire. what is the resolution?
Regards,
veena

check the operations that were used for seaparation in V_T588D
there u need to delimit the infotypes
later on run the action Rehire with the same personal number

ESS Address Zip code textbox problem

Hi Experts,
throught NWDI , i dont the postion changes for Zip code and Country in ESS Address field. i deployed to DEV it is working fine. When i deploye the same in QA Portal. Zip code textbox is not in the same Row.
Please let us know why Zipcode Text box field lable is not appreaing in same Row of Zip code label.
Thanks,
Srinivasu.Y

Hi ,
I found the Address page is pointg to wrong ivew, i replace with SAP Standard iview. Issue resolved.
Thanks,
Srinivasu.Y

FI-AP (vendor master group, Zip code required field)

Hello SAP Guru's,
I am working on Vendor master data groups and my client asked me to make the zip code field mandatory. When i go to "define account groups with screen layout- vendor name-general data- address, i don't see a tab for Zip code to make it a required field. However, i checked Postal code, city field and make it into a required field. Is zip code = Postal code, city? or do i have to contact other programmers so they can design this functionality in SAP?

Dear,
yes, I also confirm You that the Zip code is the Postal code.
So please go to IMG --> Define Account Groups with Screen Layout (Vendors)
and for Your Account Group do the following setting:
double click on General data --> double click on Address
and define as Required entry the field Postal code, city technical names:
City LFA1-ORT01
Postal Code LFA1-PSTLZ
I hope this helps You.
Mauri

Using AJAX to load city, state, metro area based on zip code

I'm new to getting APEX to work with AJAX properly. I've been reading some tutorials and trying to apply what they do to my situation, but I'm running into a problem. I have a text field item for zip code. What I want to happen is that when someone enters in a zip code, I want to use AJAX to populate 3 different select lists (1 each for state, city, and metro area) and to populate a checkbox (of neighborhoods based on the zip code as well). I'm looking at the examples in:
http://www.oraclealchemist.com/wp-content/uploads/2006/11/s281946.pdf
and
http://apex.oracle.com/pls/otn/f?p=11933:63
But they all use examples where the value of a text field item is used to populate 1 select list. I can't figure out how to apply that methodology to populate 3 select lists and 1 checkbox item. I've got all my SELECT statements written to populate these fields based on the value of the zip code text field item, but don't know how to convert what I already have to use AJAX.
Here are my SELECT statements:
P2805_STATE lov:
===========================================================================================
SELECT INITCAP(GEO_DATA_STATE.STATEFULLNAME) d,GEO_DATA_STATE.STATE v
FROM GEO_DATA_STATE, GEO_DATA_ZIP
WHERE isPrimary = 'P' and
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY STATEFULLNAME
P2805_CITY lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_CITY.CITY)) d,GEO_DATA_CITY.CITY v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_CITY
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.CITY)) = trim(upper(GEO_DATA_CITY.CITY)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY GEO_DATA_CITY.CITY
P2805_METRO_AREA lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_METRO.METRO_AREA)) d,GEO_DATA_METRO.CODE v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY 1
P2805_NEIGHBORHOOD lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_HOOD.HOOD)) d,GEO_DATA_HOOD.HOOD v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO, GEO_DATA_HOOD
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
GEO_DATA_HOOD.METRO_CODE = GEO_DATA_METRO.CODE and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY 1Do all these statements need to go in 1 on-demand process? Where do I go from here?

Andy, cool. This is starting to make more sense. THANKS A BUNCH! OK. I've gone ahead and modified the on demand process to suit my needs, so I have:
begin
owa_util.mime_header('text/xml', FALSE );
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
-- Building States list
htp.prn('<SELECT>');
FOR i in (
    SELECT INITCAP(GEO_DATA_STATE.STATEFULLNAME) d, GEO_DATA_STATE.STATE v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP
    WHERE isPrimary = 'P' and
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY STATEFULLNAME
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Cities list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_CITY.CITY)) d, GEO_DATA_CITY.CITY v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_CITY
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.CITY)) = trim(upper(GEO_DATA_CITY.CITY)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY GEO_DATA_CITY.CITY
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Metro Area list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_METRO.METRO_AREA)) d, GEO_DATA_METRO.CODE v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY 1
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Neighborhood list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_HOOD.HOOD)) d, GEO_DATA_HOOD.HOOD v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO, GEO_DATA_HOOD
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
    GEO_DATA_HOOD.METRO_CODE = GEO_DATA_METRO.CODE and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY 1
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
end;It doesn't look like I would have to modify the appendToSelect function at all, correct? Is the checkbox that I need to populate handled the same way as these select lists? And it seems like I only need to make the 2 changes that you mentioned to get_AJAX_SELECT_XML function, right? So my javascript function should be like:
<script language="JavaScript1.1" type="text/javascript">
function get_AJAX_SELECT_XML(pThis,pSelect1,pSelect2,pSelect3,pSelect4){
if (document.getElementById('P2805_ZIPCODE').value.length == 5)
     var l_Return = null;
     var l_Select1 = $x(pSelect1);
     var l_Select2 = $x(pSelect2);
     var l_Select3 = $x(pSelect3);
     var l_Select4 = $x(pSelect4);
     var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=otn_Select_XML',0);
     get.add('TEMPORARY_ITEM',pThis.value);
     gReturn = get.get('XML');
     var sels = gReturn.getElementsByTagName("select");
     if(gReturn && l_Select1){
          var l_Count = sels[0].getElementsByTagName("option").length;
          l_Select1.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[0].getElementsByTagName("option");
               appendToSelect(l_Select1, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select2){
          var l_Count = sels[1].getElementsByTagName("option").length;
          l_Select2.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[1].getElementsByTagName("option")[i];
               appendToSelect(l_Select2, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select3){
          var l_Count = sels[2].getElementsByTagName("option").length;
          l_Select3.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[2].getElementsByTagName("option")[i];
               appendToSelect(l_Select3, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select4){
          var l_Count = sels[3].getElementsByTagName("option").length;
          l_Select4.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[3].getElementsByTagName("option")[i];
               appendToSelect(l_Select4, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     get = null;
</script>
And then since all 4 items (3 select lists and 1 checkbox item) are populated based on the value inputted in the text field item, I would only need to add the following to the html form element attribute of my text field item, right?
onKeyUp="javascript:get_AJAX_SELECT_XML(this,'P2805_STATE','P2805_CITY','P2805_METRO_AREA','P2805_NEIGHBORHOOD');"Denes, thanks for the example. It seems like what I need to do is somewhere inbetween what you have and what's in the example on http://apex.oracle.com/pls/otn/f?p=11933:37. I have 3 select lists and 1 checkbox item that should all be populate depending on the value entered for the text item. Do I still need to split everything up then into a function and an on demand process for each select list and checkbox?

Msi Reg wrong fromat for zip code.

Similar Messages

Maybe you are looking for