Msi rg54gs2 print server incompatibility

noticed the common issue with rg54gs2's print server throughout the forum..
i've got a hp dsc 1410 usb printer (which is not in the compat. list from msi).
i get it to print smaller documents via the server, but with larger files (photos i.e.) it starts, but suddenly halts while printing..
tried both direct and buffered print, disabled firewalls/encryption, checked signal etc...
got a p4 2.6ghz, 512mb with xp sp2 and an integrated 54mbit wlan.
can anyone relate to this problem or confirm rg54gs2's incompatibility with printers not in msi's list.
/silas

you'd probably get a better answer by contacting MSI support: http://support.msi.com.tw

Similar Messages

MSI RG54gs print server BIG PPROBLEM!

hi,
i have faced several hours with my new MSI RG54gs router trying to put my X75 Lexmark working but with no sucess....
Also there a couple of messages here in forum that refect the same problem with others users of this product.
Question:?
- Is there any one that haved used the usb print server port of a RG54GS MSI Router?????
Or there´s any technical contact in MSI that we can get more support, because upgrades to the router and to the router driver see not to work, and,....., that´s it,....
thank´s
José

I just had to right something. Despite what ppl tell u, it is not your printer.
Ijust updated from a d-link 713P to a msi rg54gs. BIG MISTAKE!!!!!!
On the serial print server ob the dlink my printer worked fine, yet i can't get it to work on msi rg54gs. U might say it could be the USB functionality of my printer, well hell no!!!!!! I plugged it staright to my comp and it worked fine. That leaves one thing the gateway.
Now I have seen a lot of threads here for the smae problem. The usb print server is !!!!!!!!!!!!!!!! Whats the deal MSI you could at least release a firmware which rectifies the problem or tell us how to fix the problem. Or even better in future don't sell shitty Faulty products!!!!!!!!!!!!!!!!!!!!!!!!!
Please fix the problem!!!!!! Or risk loosing another customer!

MSI RG54GS2 - problem with print server

Hi,
I have router MSI RG54GS2. Everything works correctly. If I connect printer to USB on router then my router works only 10 hours and then it freezes. If printer is not connected, router works fine without freezing.
I tried to use new firmware, but it doesn't solve my problem.
What should I do, please?

So, I tried it. Router works correctly without freezing but only via cable :( . If I try to connect via WiFi to my NETWORK, then my notebook and PDA find SSID and that's all. Widows show formular that everithing is connected correctly, but internet and lan network doesn't work. If I disconnected PRITER from router, then noteebok and PDA could connect to internet and local network.
:( I have only trouble with this router :> .

2101nw print server (and LaserJet M1132 MFP) – installation problems on Windows 7 (64bit)

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

HP webservices tab not available when using HP Jetdirect 2700w wireless print server

I recently bought HP Laserjet Enterprise 500 m551 dn color laser printer with HP jetdirect 2700w wireless print server ( one day old at this time).
I was able to configure the device and enable/ use eprint services using the embedded server with a wired connection.
However when I attach a the mentioned wireless print server, the "Webservices" tab disappears from the configuration website, the printer reports that the eprint services are not enabled and ofcourse hp eprint or google cloud print do not work. The printer appears offline at eprintcenter. Everything else works fine.
On the product website for the wireless server, it clearly states that this is compatible with eprint services.
What am I doing wrong.
Arjun
HP Laserjet Enterprise 500 m551 dn color laser
HP Jetdirect 2700 w wireless print server
Win 7 Ultimate x 64
Netgear WNDR 4500

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Jetdirect board here:
http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2

Hello Guys:
After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
First install the following drivers:
1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
2) After that Go to Server Preferences, Double click on Print/Fax.
3) Click on the "+" sign, select Line Printer Daemon - LPD
4) In the Address field, enter the IP address of your print server.
5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
6) The Name field should automatically be populated.
7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
8) Click on Add
And now open up text edit or something and you should be able to print.
let me know if there are any questions.

Try Repairing permissions (Disk Utility). Then restart, then add again.
What do you mean by the printer doesn't show up - the driver (print using:)?
You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X.

How to set up new MBP to use D-Link print server

New to Mac. MBP found 2 of my 3 printers right away. Tried manually configuring the 3rd which is an older HP Laserjet 1320 connected via USB to a D-Link print server. In Win you config using the IP address and port name. Configuration appeared to work but nothing gets sent to printer. If this is an easy fix I would like to go that route but if the print server hardware is too old please suggest good alternative that will work for both Windows and Mac systems as I have both in the house.
Thanks

I was able to resolve this by rebooting the print server.

Can't find printer on print server

Macbook 10.7.4
PS121 print server from netgear
MP500 Canon printer
OK I can print from all my xp computers.
I can access the print server from Safari
I have tried to set up IP printing with the print server ip address 192.168.0.4 and it recognizes it as a valid IP address but does not seem to see the printer behind it.
I have boot camp running and can print from the xp side of things on the macbook. So it has got to be an config problem somewhere.
Any body have the same issue?
Thanks
macbook Mac OS X (10.4.7) print server

OK here is how I did it.
MacBook
Netgear Router
Linkstation Network drive acting as print server
Windows network
Canon Pixma MP500 printer
This took about three weeks to solve so I am trying to piece together the correct path you need to take.
Make sure you have ”on” print sharing under your “system preferences”.
Under firewall tab and the advanced tab Uncheck all “UDP,Logging and Steath.” I am going to start to turn these back on for security reasons but this is how I got it to work for me.
First I went to Printfab.net and got the print driver for the Canon MP500. This is good for Mac OSX tiger. I installed the program. At first I was not seeing the print drivers on my system. I had to get the print drivers to install so first I had to try to set up a printer. So I "Add printer" and under the name I typed "Canon PrintFab" This showed me all the the print drivers that were installed with the printfab program. It seems that once I did that they we installed so I can view them all the time in “Printer Setup Utility”.
You need to find out the path for you print driver. I was not able to actually see my print driver in the “finder viewer” but I could view the path to the directories on the networked drive. As I recall I had a netgear print server PS121 installed previously and I was able to see it. So to get the correct path name you are going to need under “finder” select network. You should then see you networked server name. Mine was “Mshome” because I am sharing this computer with three other windows based computers and I am hooking up to a windows started network. Under “mshome” I can see my network drive. Now you need to “mount the drive” so double click it and you we be asked to “select the SMB/CIFS shared volume you want to connect to” I selected the “shared folder” on the drive. Now it shows up as an icon on the “finders” left side. Now highlight it and “get info” from the menu bar. Under the general line I saw “server: cifs://mshome;danr@link/share. This is what it means. “mshome” is my networked name that the print server is on. “danr” is my account name on my mac. This is the name I see in finder that has all my docs and files under. “link is the name of the network drive.
Now I went back to "add Printer" Put the protocol to "IPP" and hold down the alt key and hit the "more printers" button at the bottom. Up pulls the list and select "advanced" option. Select " Windows Printer via Samb". In the device name you will want to enter the device that the printer is called. Mine happens to be "lp" Next under “device URL” after smb:// my line looked like this smb://mshome;danr@link/lp this is the info I got previous from finder. After “mshome” there is a semi-colon no a colon. Now under “model” I selected the Printfab driver for my Canon and then hit the “add” button.
And that was it I printed a test page under the utility program to test it.

I want to know if Ican connect a print server (to print with several wireless printers) to the new airport express given that it has wan and lan ports. Tks!

The print server that I want to connect allows me to choose among 2 usb printers and 01 serail port printer. It needs to be connected to a router through a lan port. Given that the all new airport express now come with a wan and a lan port, i want to know if I can connect this device to the airport express.

You're welcome.
Beware that while USB print servers are commonly available and inexpensive, finding one with a serial port is more of a challenge. Apple Stores in the US do not sell them. Call the iStore before going there.
If you need recommendations for obtaining a print server with a serial port, let me know.

Best Practises for File Sharing and Print Server on Windows Server 2012

Is it better to have File Sharing and Print Server installed on the same Windows 2012 Server ?
Or, they should be installed on 2 different Windows Servers ?
Hussien Sherief

It will work just fine to combine them.
But most people would recommend keeping functionality separate... if the budget allows. That whole "single point of failure" concept. If that server dies, you've lost both of those functions.

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

11.1.2 print server installation

Hi All,
I wonder if anyone has had experience of installing 11.1.2 in a primarily Solaris environment.
For our installation - everything seems to be going quite well apart from getting PDF's from financial reports.
Since the print server needs to run on Windows - we have installed it in Windows Server 2003 and gone through the configuration. However when running a report in PDF, workspace shows the loading message forever and never returns a PDF. It is fine in HTML.
Our environment is:
Solaris 10 VM for foundation services - running Shared Services, Workspace and APS.
Solaris 10 VM for essbase - running just Essbase.
Solaris 10 VM for reporting services - running EAS, Essbase Studio, Web Analysis, Financial Reporting, Reporting and Analysis
Windows Server 2003 VM for the Financial
Looking at the logs give some clues that there are attempts to access non existent files and I believe I know the problem is where I configured the R&A repository directory on the server which for the both installs was local. On the unix install some of these errors are looking at paths to a C: drive (i.e. the print server install location). It looks like I need to configure both to the same location.
So the advice I'm after is:
- should I setup a unix share through Solaris and try and get the print server to access this
- or should I setup a windows share and get both services to access this also.
Or is there any other way to do this. The install guide is quite vague about the repository location.
Cheers,
Dan

Hi, dlclarke
I have a similar scenario here and also can't get the PDF output with 11.1.2. Right the same symptom and a very similar environment.
One of the servers is a Linux 64bits with Essbase, WA, RA Framework, Foundation, Financial Reporting (except print server). The other is a VM with Windows 2008 64bits and ghoscript 8.63 32 bits with the Print Server.
The Print Server is configured but when you open a financial reporting as PDF it becames loading and loading forever. The output of the Print Server is:
Financial Reporting Print Server started successfully.
Exception in thread "Thread-13" java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:399)
at com.hyperion.reporting.printserver.PrintServer.setOutputFileName(Unkn
own Source)
at com.hyperion.reporting.printserver.PrintInstanceThread.run(Unknown So
urce)
Was your problem appeared to mine? Is it needed to create a folder share between both hosts?
Another thing, in what log files had you found errors looking for a C: drive path?
Thank you in advance.

Airport Express questions on wireless print serving

I have a wireless network setup using a linksys router and thinking about using an Airport Express as a wireless print server in another room. I currently have a Canon MP500, 2 wired PCs connected to the router and 2 wireless laptops one Windows and an iBook. Would the Airport Express connect to my existing wireless network to act as a wireless print server for my network?
Thank you
PCs running Windows XP Pro and iBook is running OS X Tiger

Hi, does anyone know how to change the port setting on Windows XP Pro. I recently purchased an Airport extreme and the network is working great, however when I tried to set up the printer the documentation left some key peices of information out.
I had followed the step for installing a printer, but when I got to the point about specifing the adapter type, the documentation in the manual that came with the Airport skipped over that part. I guessed at the adapter and unfortunatly (and obviously after reading the instructions here http://www.ifelix.co.uk/tech/1008.html) I chose the wrong adapter. Now I want to go back and fix it but I can't figure out how. When I tried to run the add printer wizard again and the port setting wizard it said the port (IP_10.0.1.1) was alread in use and kicked me out of the wizard.
How do I change the settings on the port to the correct settings?
Thanks
Dell laptop Windows XP Pro

WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

Msi rg54gs2 print server incompatibility

Similar Messages

Maybe you are looking for