.Msi run test link and Cisco programs help?

HEllo
I am contemplating buying a Mac but I do need to install a Cisco product for work and therefore I've tried to run a test which allows you to see if it can be done
i tried on different Mac comps (few friends have) but this link didn't even run any test
http://www.systemrequirementslab.com/Client/GreatvirtualWorks/?apikey=1b76a201-6 fb7-485f-8e08-1ad71a52a7f2&clientid=999-999
Can someone tells me if does it only work on windows bootcamp? Does it work If it's done throu boot camp or any other windows thing on Mac?
I'm wondering Cisco software can be installed using bootcamp?has someone maybe installed Cisco products on Mac with boot camp?
I'll appreciate any help just wanna make a decision
Thank you guys

Quote from: Maesus on 05-April-07, 23:50:58
wait.... P6N SLI, for dual channel is it DIMM 1 & 2 or DIMM 3 &4, and not DIMM 1 & 3 or 2&4 ?
It's just confusing, because of the way MSI colors thier slots (different from every other motherboard manufacturer)... the layout is the same as every other board and is used the same, but note the following labeling below:
cpu is here
DIMM1 (green slot, closest to cpu)
DIMM3 (green)
DIMM2 (orange slot, closest to cpu)
DIMM4 (orange)
24pin power connector is here
...if you look closely, the 'second slot down from the top' is labeled DIMM3 (<-- 3 ), so yes - according to the actual labeling, you are supposed to use DIMM1 & DIMM2 (one green and one orange) slots. However most people commonly 'refer' to these as "slots 1&3" - and thus, the confusion .

Similar Messages

Run-Time Menu and Event Structure~~HELP~~

Hi, brothers,
I'm new user for LabVIEW. Use the version of LabVIEW is 8.6
One problem describe as below:
Can Run-Time Menu and Event Structure exist simultaneously?
Without Event Structure, Run-Time Menu works well, but Run-Time Menu works abnormally.after adding Event Structure,
How do I modify the problem?
Thank you for your help.
Attached is the program.
Attachments:
PC_Adjustment.zip ‏44 KB

Yes they can coexist, but not how you did it.
Every iteration of the while loop you wait for an event in the event structure, and you look if the user has selected anything from the menu.
To get this working you should add an event for <this VI>\Menu Selection (User):
Ton
PS you should add a stop button, the only way you can stop the VI is hitting the 'emergency stop' button, with hardware connected (like you have) this is not the adviced routine
Message Edited by TonP on 09-26-2008 07:34 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Main_BD.png ‏5 KB

Hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

Hi
It may be virus, please reset all IE settings and try antivirus and scan your PC. Before that esure that other PC connected to the same internet is able to access the Site which will let you know if this is issues with ISP or not

Dynamic link and workflow optimization help needed

As a vlogger I just tried out a brandnew method to save time and renders. Instead of editing every clip separately in After Effects and then rendering it and then do the final edit in Premiere, I just edit immediately in Premiere, then when it's finished editing I do a global color correction in AE via Dynamic link. I'm just kinda worried the results are bad. Do you think it sucks? Do you like it? Would you subscribe? Do you wanna see other vlogs?
your opinion helps me more then you think.
your good friend,
ck

Edit in Premier then dynamic link to AE is the usual workflow. I've been doing a bit of color grading lately but I'm still not on par with the terms a colorist would use but I think the vid has a dreary look to it. Dark, not much contrast, needs more tone? Also advice on vlogging sounds like a post for the video lounge.

I have a MacBook Pro, it recently started freezing upon startup. It would get to a blue screen and just sit there. I've tried booting in safemode to run disk repair and still doesnt help. If I do manage to get past the blue screen, it still freezes

My mac keeps freezing upon startup. It will get to the blue screen and promptly freeze. If I manage to get past the blue screen, and open up youtube on google chrome, it will freeze before it loads youtube. I've tried safeboot and disk repair, nothing seems to work. I even tried to factory reset it but it wont connect to my internet when I reboot with power + option.. any ideas?

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

I have a MacBook White. Everything worked great with Snow Leopard including Mathematica, and all Pogo games. I downloaded Lion two days ago and now neither program works. The box states that I need J/Link, and/or java runtime. Help.

I have a MacBook White, early 2009 model, just downloaded/installed OS X Lion. Everything worked well with Snow Leopard - Mathematica, pogo.com games. Now, with Lion, I am getting a box that states I need J/Link, and/or java runtime. Software update feature states all software is up to date. Help.

StoneComputers wrote:
What about the incredable lag time from clicking on a program to the time it opens (or the time till the loading screen starts)? I wish I could record it and play it so I could see if thats normal from other members... the icon just sitting there for over 35 second (I just counted 36 till the loading screen popped up) at first I thought it was me not clicking hard enought cuz the mouse button I have is real stiff (any ideas on that?) but no it takes that long just to get to the app loading screen... this happens every time same amount of time with the 3 programs I use the most, prolly more but I know for a fact world of warcraft, uTorrent, and Google Chrome. I would just chalk it up to slow hardware but they load real quick in windows 7 and once this bad spot is loaded the program runs so fast and nice afterword. Maybe some tweeks? I wonder if this would happen in Snow?
The coment "few outdated programs" Ive seen alot its not just a few its a lot and since games are not Apple's strong point I would think they would want to keep as many as they could...
An example of the rants you will see from a lot here. Don't be put off as these problems are generally user specific, and these same old comments come out after the release of every OSX I can remember. When Lion is upgraded to the next OSX you can gaurentee these forums will be full of people screaming about how great Lion was. Happened with Tiger, Leopard and Snow Leopard.
So come to think of it you may be better off Googling sites that give you unbiased views on Lion, rather than expect any positive comments here. For every one complaint there are probably 100,000 people with no issues.
Cheers

When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

Hi, I just started a new movie and the program is running very slow. Is there a way to clean up my iMovie program so that it goes faster? Please help.

Hi, I just started a new movie and the program is running very slow. Is there a way to clean up my iMovie program so that it goes faster? Please help.

There is nothing you can do with iMovie program itself. Slow response in usually due to a shortage of system resources (CPU, RAM and disk space).
How much free disk space do you have on your boot drive and what is the capacity of the drive?
You can check memory utilization while running iMovie using Activity Monitor (in Applications/Utilities). What does the Memory tab show for Swap used?
Are you running many other processor-intensive applications a the same time?
If you have a lot of events and projects, it will help a bit to hide the ones you are not using by moving them from your iMovie Projects and iMovie Events folders into an enclosing folder so iMovie doesn't load them.
Geoff.

HT1926 My .msi file is missing, and I can neither download nor uninstall iTunes. Can someone help?

When I tries to update my existing iTunes, I could not do it because I did not have the .msi file it needed. So I tried to uninstall, but I can't even do that because of that missing file. Could anyone please help me? I'm getting desperate here, and I'm scared that I won't be able to use iTunes after a while.

When I tries to update my existing iTunes, I could not do it because I did not have the .msi file it needed. So I tried to uninstall, but I can't even do that because of that missing file.
Assuming here that the particular missing msi file is either the itunes.msi or the itunes64.msi.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Help, Ni-Daq channel names and labview program error 10001?

Can anyone please help me, I have inherited a role that I know nothing about. I have managed to get an NT pc to now recognise the SC-2345 board, set up and configure two channels and test them in Measurement and Automation program, this I managed after getting error 10401 and looking within these message boards which are very good.
I have then started a labview program, previously written by ex-employee, and now get error 10001, after trawling the FAQ and forums I think that I have a naming error in the virtual channels created, how do I find out what the channels should be named within the Labview program, do I need to load an editor etc and then open a config file?
Sorry if this seams like a simple error, but I am trying to learn the software from a book that is a little tattered.
Regards

Hi,
error 10001 can be caused by a few things including an incorrect scanning order.
If you'd like to post your code back onto here (or if it's large, ftp it to ftp.ni.com/incoming and let use know the name of the zip file you've packaged it into), then we can see what the DAQ section is supposed to be doing and hopefully provide some clues as to where to look for the information / why the error is occuring.
The first thing to do is go back to Measurement and Automation explorer and try setting up a global task that refers to the channels you're interested in.
This removes the programming side of things, since you select from drop down lists, to verify that you can communicate correctly with the hardware at the rates and across the channels that you want.
These links is going to be your best learning point for getting up an running with the program.
http://digital.ni.com/public.nsf/allkb/DD52ABD7C15F0B15862562910074F09E
http://zone.ni.com/devzone/cda/tut/p/id/3116
http://zone.ni.com/devzone/cda/tut/p/id/4656
In terms of LabVIEW, there's several I/O controls you can use which will list the hardware channels you have configured or the global tasks you have created in Measurement and Automation explorer. (see the last link above)
Another option is to look at our Alliance Partners if you need things configured and up and running in a hurry.
http://www.ni.com/alliance
If you just need a little pointer on getting kicked off, then you could see if you local sales engineer is available to go through things with you for an hour if they're in your area at a convenient time (for the UK / Ireland, please call in on 01635 572410 and ask to go through to sales), or we do offer start-up assistance (but that's something you need to purchase) to get a day's onsite assistance with getting your hardware up and running and starting you off with advice / examples on your application (note this is an effort based thing rather than a results based guarantee)
Finally you could consider coming on one of our courses on LabVIEW and / or Data Acquisition to learn more about the software / hardware and be better prepared to handle the implementation yourself.
Hope that helps
Sacha Emery
National Instruments (UK)
Message Edited by SachaE on 03-23-2007 11:49 AM
// it takes almost no time to rate an answer

How to run a datagram socket client and server program

hi,
I am new to socket programming. I am following the tutorial of sun for socket programming...The link is
http://java.sun.com/docs/books/tutorial/networking/datagrams/clientServer.html
I have understood the concept, but the problem is i cannot run the program. I am using netbeans and i have created a package and stored the files QuoteServer,QuoteServerThread, QuoteClient in this package. How can i make the server program run first and then client program in netbeans
kindly help me
Thankyou

I think you are trying to run both server and client
on one machine!!!
It is impossible, your server is blocking the port to
send packets, so you must run client on another
computer!!!It's not impossible to run a client and server on the same machine just for testing or as a demo. Just have the server listen on one port and the client use a different port.
No need to use 2 seperate computers. I've done it one computer before without a problem.
Nick

I got a message to help test Mozilla and Mozilla is stopping the download of this even though I "Allowed it? The feedback submit will not let me submit any feedback to you? All info is included below,

I downloaded Version 4 of Mozilla yesterday because while playing Farmville a Zynga game on Facebook my computer was going very slow and an error message kept coming up saying internet connection had been lost and it reconnects. I use Comodo.com for security and live support, they have checked and rechecked my pc . There is nothing wrong with it. About 3 weeks ago FB/Z made a change saying they were going to throttle the game and control the limits on gift giving. This is when all the problems started that I'm experiencing now. It happened in the past when I first started playing while I was using IE 8. That is why I first started using Firefox. Firefox was so much better; no hang ups, no disconnections. The games played really smooth and easy. Now Firefox is doing the same things that IE was doing. I tried Comodo Dragon for a while. It ran really fast without problems. But, I was getting all kinds of Facebook notices because Dragon's security wouldn't let them into my email or anything. In other words Facebook cannot handle a good browser with good security. I went back to using Mozilla and have been using it ever since. But, this is horrible. It is constantly saying waiting on app.facebook...... and everything just freezes up. Then today, I got a message from Mozilla about being in a test for a week to help Mozilla make the program better. I agreed and tried to download it. It couldn't be downloaded "because Firefox was preventing the download." I clicked on"Allow" the info bar went away. It was downloading but then I got a message in the download progress bar saying it could not be downloaded because Firefox would not let it. I deleted the previous version of Firefox yesterday because I thought it would interfere with the new one so it isn't that. I am using Windows 7 and it is up to date. I sent one feedback message today but I had to work to get it to submit. I tried again about a 30 minutes ago when I got the join the test group message again and nothing would submit so I came to Mozilla.com to this page to let you know what was going on. I don't know anything else to tell you. Is it possible that to throttle down the games the Facebook browser is using to much memory and processor speed and this is causing the computers to freeze up. Other game players are having these same issues. I bragged about Mozilla for over a year to my friends on Facebook and got a lot of them to change over to it. They have loved it. Now I worry about what's going on. These problems are happening almost every time I make I do anything. It is constant?

EDIT: To try to work out what those two midden volumes are do I tried this in terminal, gave me this:
[code]
garys-mac-pro:volumes gary$ ls -l -a -i
total 524
13694 drwxrwxrwt@ 7 root admin     238 30 Oct 22:07 .
      2 drwxr-xr-x@ 38 root wheel    1360 21 Oct 23:35 ..
      8 drwxrwxrwx   1 gary staff 131072 1 Jan 1980 Data
      5 drwxrwxrwx   1 gary staff 131072 1 Jan 1980 Linux
3332740 lrwxr-xr-x   1 root admin       1 30 Oct 22:03 OSX Maveriks -> /
      2 drwxr-xr-x   1 gary staff   12288 11 Oct 19:20 Untitled
47104 drwxr-xr-x   1 gary staff    2048 12 Sep 17:59 Untitled 1
garys-mac-pro:volumes gary$
[/code]
I presume those ghost type volumes, net and home, are the ones showing up there with names as . and .. and run by 7 root admin. Shouldn't technically I be the user admin since only I use this machine? No idea why i'm listed as gary staff ... Soz for all the questions, I really wanna learn

While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First "iTunesHelper was not installed correctly. Please reinstall iTunes. E

While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)” occurred. Following directions found at https://discussions.apple.com/message/15087646#15087646, I now get the following “iTunes.exe - System Error The program can't start because AVFoundationCF.dll is still missing from your computer. Try reinstalling the program to fix this problem.”, Along with “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)” I am running Win 7 Ultimate 64 bit on HP TouchSmart tx2-1275dx. I was one week away from buying an iPad but not if this is what I have to deal with. Please help

I actually managed to resolve this on my own by downloading iTunes from the Apple website and reinstalling iTunes that way. Here's the link: http://www.apple.com/itunes/download/ That should fix your problem. Good luck!

Firefox won't open links from other programs if already running

I've seen this reported many other places, but none of the solutions have worked. I am running Firefox v33.0.2 (current as of this message) on Windows 7 64-bit (fully updated). I did the following:
1. Completely deleted my profile;
2. Uninstalled Firefox, then manually deleted all remaining files on the system pertaining to Firefox and rebooted;
3. Gone into the Windows "Default Programs" control panel (DPCP) and told it to make Internet Explorer the default (giving it all of its defaults);
4. Downloaded a fresh copy of the installer and installed Firefox 33.0.2;
5. Let the installer set my default browser to Firefox;
6. Tested link opening behaviour (see below);
7. Let Firefox set itself as the default browser when it asked me;
8. Tested link opening behaviour again (see below);
9. With Firefox not running, gone back into the DPCP, and had it set all of Firefox's defaults;
10. Tested link opening behaviour again (see below);
11. With Firefox not running, set Internet Explorer to the default via the DPCP, then back to Firefox;
12. Tested link opening behaviour again (see below);
13. Repeated steps 11 and 12 with Firefox in safe-mode;
14. Repeated steps 11 and 12 with Firefox in normal-mode with a new profile;
The observed link-opening behaviour:
- Internet shortcuts (i.e., actual shortcut files on, say, the Desktop) open in Firefox without issue whether or not Firefox is already running. When this approach is taken, no additional firefox.exe processes are created. The process does not have any command-line parameters per Task Manager;
- Links clicked in Thunderbird open correctly if Firefox is not running: one new firefox.exe process is created, I get a new Firefox window and the link loads correctly. The firefox.exe process does not have any command-line parameters per Task Manager;
- Links clicked in Thunderbird yield the "Firefox is already running, but is not responding" message if Firefox is already running. In this case, I see a second firefox.exe process created. Per Task Manager, the new process has the command-line arguments '-osint -url "FOO"' where FOO is the URL I clicked.
From these observations I believe that the link hand-off behaviour is broken. I use a single profile using the as-installed shortcuts.
Intitial version: 33.0.2
Update: Updated to 33.1, still broken.

Under Tools > Options > Advanced look to see if the "check if Firefox is default browser on startup" Check this and then restart FF. If it isn't the default it should ask if you want to make it the default. Choose yes and it should open when clicking links again.

HELP! Exporting pdf issues - no email links and gray boxes around text

I'm a newbie to indesign, and trying to learn the program as I go. I need to export my pdf for onscreen viewing. When I "print" it works, but I get no email links, and those annoying white lines here and there. I read that exporting would solve the email link issue, but it opened another can of worms for my project. Now all my graphics have black or gray boxes across them, almost like censor boxes. But my email links work.
Learning Adobe is like learning a new language, and I have far from mastered it. So when I exported, I used the lowest resolution presets, assuming it knew what worked better than I did. After dozens of unsuccessful exports, can someone please help??
Also, I've been reading posts that say to convert all spots to color to resolve the white line issue. But it's grayed out in the ink manager. What is the secret to unlock it?
Thank you!!

Thank you for any and all help!
I have CS5.5, running on windows 7. It is up to date as of 1 month ago. Here's a sample of my problem pages. Also, a screen shot of what it should look like. My guess is it has something to do with the transparencies, since it's 2+ layers of embossed objects. If I export in Acrobat 4 (1.3) these boxes don't happen. But then I get the thin white lines across my graphics, and no email links. As for spot colors, I confess complete ignorance on all color issues, but I'm trying to learn as I go. How can I export this correctly?

.Msi run test link and Cisco programs help?

Similar Messages

Maybe you are looking for