MSI RX9800 PRO BIOS Version Check
Could owners of this card post their version number, date and if possible the name of their BIOS please? You can go into the ATI Control Panel and click options then Details for most of the info. OR you can save your BIOS through ATIFlash and open it with a BIOS editor like Rabit or Radedit.
Sandra can also detect the BIOS's name through the AGP,PCI CardBus Analysis tool
Date: 2004/03/24
Version Number: 008.015
BIOS Part Number: P/N 113-AA06905-100-MI
Name Through Sandra: ATI Technologies Radeon 9800 XT (R350)
I just want to know if there are different versions of the BIOS out there. I'm getting not so good OC results and some people are getting very good ones like the review on the OC New Zealand site which got 479/391.5 with stock cooling
If you own this card could you please post some info.
Much appreciated.
Graphic Chipset (ASIC) Radeon 9800XT
Device ID 4e4e
Vednor ID 1002
Subsystem ID 9560
Subsystem Vendor ID 1462
Bus Type AGP 4X, AGB 8X
Current Bus Setting AGP 8X
BIOS Version 008.015
BIOS Part Number 113-AA06905-100-MI
BIOS Date 2004/03/24
Memory Size 128 MB
Memory Type DDR SGRAM/SDRAM
Primary Display Yes
Hope it Helps.
Similar Messages
-
I,want to THANKS to MSI ,because BUILD this MSI RX9800 PRO TD 128,it is absolute:AMAIZING!!!
The GOD BLESS ALL MSI TEAM!
It is the best VGA card I ever seen in my life!
Thanks,thanks,thanks,etc.
Tony,from ROMANIA.More information:
http://www.pctuning.cz/titulnistrana/default.aspx?ArtID=19627&CatID=75&LayID=2
mem=HYNiX=2,8ns
chipset=R360=R9800XT
frecv=380/680MHz
after OC=405/730MHz -
Are there any MSI K9A2 Platinum Bios version with better V-core adjust?
Hi everyone
I wonder if anyone knows if there are some bios version to MSI K9A2 Platinum there they have change the V-core settings. I think it´s very big step between the different V-core setting.
In my bios (v.1.3) i have this settings at V-core. Auto=1.32v (AMD 5000+ BE) then 1.36, 1.39, 1.44, 1.49, 1.51. etc.
So, if anyone knows if there are som bios version that have better options to the V-core settings i would be gratefulQuote from: AaronYuri on 05-April-08, 18:33:22
Moved it here, as you don't overvolt a chip to run it at stock.
Okay. I´m sorry if i post it wrong. I have change my profil now -
Msi Rx9800 Pro,overheating Problem?
Hi!
Today,Temp outside was 34gC in the dark side...temp in my appartament aprox 27gC,temp sistem =40gC,temp proc=50gC...my screen go in black,and the sound still hear but with breaks...comp no restart himself,I restart PC and =OK,this problem apear ONLY in all 3D GAMES after 5min ...NO artefacts,image is perfect.The VGA card is overheating?is NO OC!Work for 2 mounth witout any problem in all this GAMES,but today...After i shuth down computer for 1 hour, i ON my PC, this GAMES work well aprox 30 min ...now i 'm at work mabe tomorow is possible to stay more to find what is the problem!...
To be the VGA card problem?To be mobo?PSU?
The VGA card have only one PCI slot free in the VGA cooler side...
TKS for any ideea!TKS,for your replay...
I don't know...but my RX9800 pro is verry hot,I can put the finger on the heatsinker only 2secconds!on the full load(in 3D games)
Whay is this VGA extremly hot?
I play games 3 day after the trouble and work well,sistem temp are now 37gC and proc 43gC,now don't crash...I think it was one heat problem...but I'm not for sure it was :mobo,VGA or PSU ... -
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=130673.0Quote from: ChuvelxD on 20-September-09, 20:07:02
It seems that my 920 wont come from being underclocked to the frequency I have it set for. I have the MSI-OC genie set for 3.6GHz (18x200MHz) and that's what the bios says, but as soon as I boot into Windows 7, my CPU is underclocked.
Go into the BIOS, set 180 baseclock, +0.05 CPU Vcore and be done with it. -
Core i7 920 Underclocked?? MSI x58 PRO BIOS v. 8.5 (SLI enabled)
Hey guys, I'm having a bit of trouble.
It seems that my 920 wont come from being underclocked to the frequency I have it set for. I have the MSI-OC genie set for 3.6GHz (18x200MHz) and that's what the bios says, but as soon as I boot into Windows 7, my CPU is underclocked.
Now I know of the 'idle' state that core i7s go into if they aren't being used, but I can't seem to get it to go higher than 2.4GHz (18x133MHz). I'm running Prime95 to try to push it up to the 3.6GHz it's supposed to be at. No luck, so I even tried Prime95 with playing Supreme Commander and STILL nothing. Now Supreme Commander is an extremely CPU intensive game that works with thousands of AI units.
Can anyone help me figure out whats up?
-I made your image clickable. Click
Modify to see how I did it.
-MikeQuote from: ChuvelxD on 20-September-09, 20:07:02
It seems that my 920 wont come from being underclocked to the frequency I have it set for. I have the MSI-OC genie set for 3.6GHz (18x200MHz) and that's what the bios says, but as soon as I boot into Windows 7, my CPU is underclocked.
Go into the BIOS, set 180 baseclock, +0.05 CPU Vcore and be done with it. -
Hi ppl just wondering if anybody out there knows where I get a original msi 9800 pro bios from check the official sites and can only find drivers and utilities , currently running the medion bios in the false hope of upgrading the bios to a XT one unfortunately it was a non starter just a plain pro bios actually . want to flashrom the original back , yees i did save the original but it,s in winflash .exe format now so no good for using with flashrom
thxHi Nate that would be great if you could email it to me at [email protected] preferably as a bin file thx
-
X58 Pro BIOS Crash during Boot
Hi All,
I have recently assembled a system with X58 Pro board and Core i7 920. It was working fine for 3 months except that it started having BIOS crashes since last night. The issue is that the mainbaord lights would be on without the POST screen and within few seconds the system resets automatically. The same procedure happens for about 4-6 cycles and on the 7th cycle i get a message on screen saying the previous overclocking has failed and the BIOS is reset to default settings. Post then the system boots up normal and works just fine. But once the system is shut down and when the system is switched on(cold boot) I get the same problem. I have also noticed that a month back the CPU clock had jumped from default 2.66 to 2.67 automatically without any overclocking and just couple of weeks after that the clock rose up to 2.87. It has remained like that until the BIOS crash issue. All these happened without any manual overclocking. I was wondering how can this happen automatically unless the clock speeds are adjusted manually. That was quiet strange though. Neways after this issue(BIOS Crash) popped up the clock speed is back to 2.67 than the default 2.66. Weird again. The BIOS version is the default one(V7.0) that was shipped with the mainboard. I tried to M-Flash the BIOS to V7.3(after reading couple of postings from the forum) but without success. The same problem still persists. I have done the following things after going through the forums regarding the issue.
1. Cleared CMOS using the clear CMOS button(With power chord unplugged)
2. Tried M-Flashing to V7.3 (Not sure whether the BIOS was updated during the process)
I kindly request all of you so provide some solutions so as to get my system back to normalcy. Your worthwhile suggestions would be really appreciated. The system config is mentioned below
Core i7 920 @ 2.66 GHz
MSI X 58 Pro - BIOS Version 7.0
Corsair 6 GB(3 x 2 Gigs) DDR3 @ 1066 MHz (installed on the black slots currently)
EVGA GeForce GTX 295 1.7 GB GDDR3
Tagan 1100 W PSU
2 x 1 TB Seagate Sata HDD @ 7200 RPM w 32 MB cache
Sony Optiarc DVD-RW Drive
Windows XP 64Bit SP2
Looking forward for some positive solutionsHey NovJoe,
Thanks a lot for your reply. I have done as per your suggestion and the system works fine now. Pretty interesting though. During the individual RAM tests i did not face any BIOS crashes and i thought the MOBO DIMM SLOTS would be faulty. So i installed the second RAM strip on the second slot worked fine and finally the third one and works fine too. I am really wondering wht had happened in the first place. Was that due to any dirt or dust in the memory and DIMM contacts? Well neways i am kinda relieved now. But i wanna make sure that everything works fine. What types of tests do you suggest to make sure that the system is working almost fine??
Thanks a lots
Regards
Rahul -
Hi all,
I am needing some help.
I am using a MSI RX9800 Pro, and some games are crashing. The games just close and I am kicked back to my destop window.
I already checked all my memory using MenTest x86 for about 13 hours without erros.
Anyone know what could be wrong ?
Thanks
Eduardo...specify,what games don't work on this vga card?
I NO meet any problem using this vga card!
GAMES I play:
WARKRAFT III
MEDALL OF HONNOR
CALL OF DUTTY
WOLFENSTEIN
FREELANCER
C&C GENERALS
SOLDIER OF FORTUNE
AGE OF EMPIRE II
THE NEW WORLD
DF2,DF3,DF5(DELTA FORCE)
HITMAN 3
MAX PAINE 2
VIETCONG
BATTLEFIELD VIETNAM
J BOND 007
ALL THIS GAMES work verry verry well with this vga card(settings at max),wit sistem in my SIG! -
MSI K7N420 Pro + Adaptec DuoConnect + Maxtor 5000DV = USB 2.0 & FireWi
I've had my MSI K7N420 Pro for about a year and apart from initial teething problems it's been rock solid (BIOS v2.2). After much deliberation I decided not to upgrade the motherboard and purchased the Adaptec DuoConnect PCI card to add USB 2.0 & FireWire ports along with an external Maxtor 5000DV USB 2.0 / FireWire combo HDD.
A couple of frustrating days later I've concluded this motherboard does not like the DuoConnect and in fact it may be related to this nForce PCI write issue referred to elsewhere. Some tests I did include:
(1) the HDD works fine attached to the built-in USB 2.0 & FireWire ports in a Gigabyte GA-7VAXP
(2) the HDD works fine attached to the DuoConnect USB 2.0 & FireWire ports in a Gigabyte GA-7VAXP
(3) the HDD works fine attached to the built-in USB 1.1 ports in the MSI K7N420 Pro
(4) the HDD fails miserably attached to the DuoConnect USB 2.0 & FireWire ports in the MSI K7N420 Pro
In last case I would always get dialog boxes popup about a "Delayed Write Failure" and / or errors like the following in the event log:
Event Type: Error
Event Source: sbp2port
Event Category: None
Event ID: 9
Date: 11/01/2003
Time: 22:39:21
User: N/A
Computer: HAL
Description:
The description for Event ID ( 9 ) in Source ( sbp2port ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: .
Event Type: Warning
Event Source: Disk
Event Category: None
Event ID: 51
Date: 11/01/2003
Time: 22:39:21
User: N/A
Computer: HAL
Description:
An error was detected on device \Device\Harddisk1\DR2 during a paging operation.
I have updated all software drivers etc to be the latest version. The only thing left is the BIOS, which I am very reluctant to flash unless others think it will help.
Has anyone else had these problems? Does anyone else think it is related to the nForce PCI write issue and will this ever get fixed in a new BIOS??
MSI K7N420 Pro (BIOS v2.2)
Windows 2000 SP 3
nVidia nForce drivers v2.0Well I flashed to 2.7 without any problems... used /CC /LD switches to clear CMOS and load defaults afterwards.
The results are a mixed bag... the HDD works fine attached to the USB 2.0 ports! However attached to the FireWire ports it either fails to detect, or if I boot with the drive connected it detects but has an error in the event log and fails to show the HDD in the file explorer.
I did't expect different slots to make a difference as I'm using ACPI / IPCA (APIC disabled), but I tried 3 different slots anyway to no avail... the IRQs were always assigned to shared IRQ 11 as expected. -
MSI Gt70 unlocked bios request to kill throthelling
msi gt70 onc
Bios version : E1762IMS.10U
Build Date and Time: 01/21/2013 15:31:00
EC Version : 1762EMS1 Ver4.03
EC Build : 03/13/2012
need full unlocked bios for overclocking and activate some hidden options to kill trothelling in games.
Send me your donation for paypal pls
hope u can helpQuote from: gracer89 on 16-January-15, 08:18:20
would like to have an unlocked bios send me donation for ur work as pm
Quote from: gracer89 on 16-January-15, 08:18:20
would you have a manual for me?
manual about what...?
Quote from: gracer89 on 16-January-15, 08:18:20
would like to have an unlocked bios send me donation for ur work as pm
check PM -
Msi z77a-g43 bios code b4 black screen
Hi, i have this mainboard update to day with bios 2.12 and this card reader, coolbox cr600v2. Well, the problem is that when i turn on the system i have black screen bios with code b4, any solution?
won't boot with the card reader
Board: MSI Z77A-G43
Bios: Version 2.12
VGA: Asus GTX 780 DCUII
PSU: Corsair hx750
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
MEM: CDIMM1: Kingston HyperX KHX1600C9D3/4GX x2
HDD: Crucial M4 256GB
COOLER: Noctua U12P
OS: Windows 7 64bit Professional -
KT6V series bios version 2.0 released
MSI has posted bios version 2.0 for the KT6V series (not KT6-V) and can be downloaded here.
Update description:-
-Support Barton CPU 3000+ & 3200+
-Support Sempron CPU 3000+
-Update VIA RAID BIOS to ver. 4.31Thanks for your advise. Many people will make use of it.
-
MSI GE60 2OC - Bios & EC Update
Hello.
I want to update the uefi-bios from my msi ge60.
Bios Version E16GCIMS.611
EC Version 16GCEMS1 Ver5.06
I tried to flash this one : w8_E16GCIMS.617.zip
But i got the error message that the romid is not compatible with existing bios romid.
Why do i get this error? Do i need to update the EC 1st and then the bios?
Thanks
HaembiQuote from: Haembi on 16-March-14, 10:35:08
Hello.
I want to update the uefi-bios from my msi ge60.
Bios Version E16GCIMS.611
EC Version 16GCEMS1 Ver5.06
I tried to flash this one : w8_E16GCIMS.617.zip
But i got the error message that the romid is not compatible with existing bios romid.
Why do i get this error? Do i need to update the EC 1st and then the bios?
Thanks
Haembi
For now I would sit tight on flashing the BIOS or the EC. There seems to be an issue with it right now and we are trying to work with MSI to get it sorted out. -
Msi rx9800 installation probs with xp pro
hardware environment:
asus a7n8x del rev 1.6 with updated bios 1008
amd barton 3000
2 x 512 mb of pc3200 underclocked to match the 333mhz fsb on the cpu
6 x 80 gig 8mb 7200 wd hdd's, 2 on ide, 4 on controller card.
2 optical devices 1 x cd.rw 1 x dvd.rw
520w psu
this rig is running win xp pro with all latest updates.
i just upgraded cpu and ram on this box and bought the vid card for sum added punch in my gaming. it was previously running an ati 7500 4x agp card with the latest omega drivers.
msi rx9800 came in the mail today. tested with last 2 ati releases of catlyst, tested with drivers on the install disk, and tested with the latest omega drivers, as well as downloading drivers direct form msi site. all failed.
i pulled it out and plugged it into a garbage system that barely meets min req for the card and it booted without a problem using catalysts.
so the card is not doa.
what am i missing?
yes i was sure to completely uninstall all previous driver versions.
any and all help appreciatedQuote
Originally posted by nate128
Did you find an XT bios for the RX9800??? Our PCB is layed out much differently than most other cards, be carefull and do a lot of research before flashing with the new bios. Please let us know if it works or not as well, I would really like to know and do it myself. Thanks
yeah, i hope its ok to post this link for you:
Code: [Select]
http://www.freewebs.com/blingt/ORIG.BIN
that is the xt bios. apparently ppl are getting mixed results and one person i found in a diff forum had to go thru some hoops to return his card to original bios, which included putting in a pci vid card to boot the machine.
maybe you can confirm some facts for me before i flashrom mine
1. this is the 360? cz if u flash a 350 ur done and ull be lucky to get ur card back
all indications short of pulling the heatsink off to eyeball the chip says it is true. has this card been released in 2 versions, one of which may harbor the awful secret of a 350 ?
everything reports this card in my box as an xt, however, sandra 2k4 pro shows it as " msi radeon 9800 pro plus " and NOT the XT, which sytem info shows it as, as well as device manger.
2. the bios i provided the link for is a morrien (sp.,? going from memory here) which is supplied to the msi cards sold as XT's in germany which are built on the 360. this is what led modders to believe they could flashrom the chip. true or false?
3. this one doesnt demand an answer, just simply stating that i have found just as many bad results in my search as i have found good results. i can attribute some of the failures to ignorance and inexperience, just as i can attribute some of the success stories to blind luck ( ppl just following instructions in random forums without a clue as to what its going to do )
one fact remains, the people who had success have experienced great success. that is enough for me to rip the heatsink off and confirm the 360 lies beneath before i flash anything.
Maybe you are looking for
-
Data usage rounded up to nearest GB in Bill summary; Cannot download details as spreadsheet
Two problems: 1. Bill summary misrepresents data usage, rounding up to the nearest GB, for one of our 4 lines. 2. Data detail "download to spreadsheet" does not work. My account has 4 lines. I have an old Family Share plan (no longer available) for 7
-
Changing the length of a key field in a table
Hi, I want to increase the length of the field from 2 to 4 in a standard SAP table and deliver it to the customers. This field is a key field in table. This field from this table is also used in view and view clusters. What is the implication of chan
-
Problem in Spl Characters handling
Hi Friends, We are developing a applicatio using J2EE Tech., Problem which we face now is with spl character. There is text box in our application, If are entering the data(even spl char) it is storing in the database properly and diaplays it correct
-
Receiving Mail (2 Accounts)
I have a quick question about mail. I have my work email set-up and nothing changed in the last year on my end. Just started noticing today that I was not receiving mail but it was making it online to my "smartermail" host. I set-up another account i
-
How to delete an installed printer driver on imac
I have installed a new printer through on my imac (10.6) and it does not work. how can I delete this installed printer driver (without affecting anything else)?