MSI StarCam Clip - signed driver for Windows 8

After upgrading to Windows 8 x64 I lost my webcam.
I tried install unsigned driver and camera worked for a while* (search for windows 8 install unsigned driver, I can't put one stupid link to post).
But after few days / restarts Windows decides to disable driver again.
Please can MSI release signed drivers for Windows 7 (32bit/64bit) and Windows 8?

Quote
Please can MSI release signed drivers for Windows 7 (32bit/64bit) and Windows 8?
Ask MSI: >>How to contact MSI.<<
This is a Users-to-Users Forum. Requests have to be pointed at MSI directly.

Similar Messages

USB Webcam MSI StarCam Clip & Skype

I've just tested a MSI StarCam Clip Webcam on a G4 Mac Mini 1.25Ghz running Mac OS X 10.4.8. Cannot use the webcam's built in mic & video together because a loud ringing noise is produced. I have a usb mic and use that for sound input and the webcam only for video.
Supplied Webcam Monitor App & Quicktime:
Used the webcam monitor app that came with the driver to set the webcam resolution to 640x480. The picture is good (almost MacBook iSight quality) but the picture tears up quite a bit.
Skype:
Picture is good (confirmed with sister running Skype on a MacBook) and there is no tearing. Skype developers have probably developed their own code for video.
iChat:
Webcam is not recognised.
MSI StarCam 370i drivers here
http://www.msi.com.tw/program/support/download/dld/sptdlddetail.php?UID=604&kind=10
MSI StarCam Clip drivers here
http://www.msi.com.tw/program/support/driver/dvr/sptdvrdetail.php?UID=620&kind=10
Hope this helps.
Mac Mini G4 Mac OS X (10.4.8) 1 GB RAM, ATI 9200 32MB, Samsung 940BW 19" Widescreen TFT LCD monitor

PizzaCake-
Sorry for being a little denser this morning than usual. I sense that perhaps you are attempting to provide information, but since this is a help forum I am just trying to make absolutely sure.
Do you need to fix the loud ringing noise? Is there another issue with getting the rig to work that you would like for us to contemplate?
Luck-
-DaddyPaycheck

X301 and Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)

Ok, I (Lenovo) did it again.
System Update showed me this update: "Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)".
As I'm using Vodafone and I had a AT&T driver, I decided to update.
The result is, that now the GPS doesn't work.
Yes, I'm in a place where the GPS signal is present (my house, with the previous driver I was able to get 6/7 satellites).
What happens? Lenovo TV GPS stays there trying to fix the satellites, but nothing happens. I can't recover the system to a previous state, as I updated Flash player too, and Windows only show me the possibility to roll back this update.
So, apart advicing everyone not to update, I kindky ask:
- where can I found the previous driver? I searched the web without success...
- why does Lenovo deploy driver which can cause problems (I just had one updating the BT driver last week! .msi installer problem, error 1935...)?
Thanks to everyone
600, R52, T61p, X301

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

My PC sign: driver for keyboard filter not found. what can i do?

my PC sign: driver for keyboard filter not found. what can i do?

Hi:
I don't think it is a big deal but let's see if we can find a driver for it.
Please click on the missing keyboard filter in the device manager. Then click on the details tab. In the Properties drop down list, select the second item (Hardware ID's).
Post the top string of characters you see in the window.
That will give me more information to go on.
Paul

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

MSI StarCam Clip II focus problem

Hello,
I just received MSI StarCam Clip II and after installation there is a problem with autofocus.
After even tiny movement of object in focus the camera is trying to auto focus again, but it takes few seconds.
Problem is that the movement can be very very small almost like eye blink, but the camera is trying to focus like it was turned from shortest focus to infinite then it stays there for a second and after another small movement of the object it focuses again to correct focus.
Object is face or person.
Should I go to vendor for replacement or can I change some settings?
Thank you
Regards
Petr

It's probably having trouble focusing because of insufficient light. Try to increase the amount of light in the area, especially light falling directly on your face.

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

Lenovo Thinkpad 8 Wifi driver for Windows 10?

I've installed Windows 10 Technical Preview on my Lenovo Thinkpad 8. It's been working pretty nicely, except for one thing: the Broadcom Wifi card driver (Broadcom BCM4324 Wireless LAN Driver). Since this doesn't work I have to use a USB antenna.
This driver has gotten no update since the release of the Thinkpad 8! I tried running it in "Windows 8 compatibiliy mode" and that still doen't work. Does anŷone know of a possible way to make it work (either with an update, or an older driver in compatibility mode)? Any idea or suggestion (or word from Broadcom) is welcome!

I had the same problem and installed the Win 8.1 version of the driver.
First deinstall the microsoft driver, download the driver from http://support.lenovo.com/<xx>/<xx>/products/tablets/thinkpad-tablet-series/thinkpad-8/?tabName=Down...
replace <xx> by your language code. eg. en (my language code was de)
look for Broadcom BCM4324 Wireless LAN Driver for Windows 8.1 (32-bit) - ThinkPad 8 or (64-bit in case)
Start the installer and you're done.
strolchi

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Deskjet 1280 Driver for windows 8.1 Pro

Hi Team,
I have upgraded my compter operating system from windows 7 professional to windows 8.1 pro now, I unable to install HP deskjet 1280 printer to new operating system.
Can you please send me a link to download the driver.
Regards,
Umesh

Hi @Umesh_kanth ,
I understand that you need the driver for Windows 8.1. I would be happy to help you.
I checked the website and unfortunately there isn't any drivers to be able to download for Windows 8.1 for the HP Deskjet 1280 Printer. But you should be able to install the printer with a Windows generic driver. Plug the printer into the computer to see if Windows will automatically install a OS. driver.
You might have to add the driver manually, here are the steps:
Go to the start up screen. (tiles menu)
Type in "Devices and Printers", select settings, click on Devices and Printers.
Click on Add Printer and follow the steps.
Select the HP Deskjet PCL3 Class Driver from the list.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP deskjet F370 driver for windows 8

I don't seem to be able to find a driver for Windows 8.1 that will allow me to use my HP Deskjet F370. Can anybody give me advice?
This question was solved.
View Solution.

Hello hnnh,
There are two ways to download and install the ful featured software for Deskjet F370..
1> Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
2> Or click HERE to go to driver page, select your PC OS , click next and then click on Driver and download full featured software.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Photosmart 325 driver for Windows 7, 64 bit

I cannot find a driver for Windows 7, 64 bit to run the Photosmart 325 printer. Does one exist? Is there a work around? (The driver for Windows 7, 32 bit does not work)

Use the Photosmart 320 series driver available through Windows Update.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit

I had an issue with installing an HP LaserJet 5 printer to a WIndows 7 64-bit box. I thought I would post my experience and solution to this problem so that others can quickly resolve similar issues.
If you connect as I did with a Parallel Printer-to-USB cable, then Win-7 searches for drivers automatically. But none werre found. However, using "Add Printer" via Control Panel/View Devices and Printers/Printers and Faxes, then left click starts the process for finding and installing the HP driver needed.
No need as others have suggested to go to HP Support Center to install their Universal Printing PCL 5 driver found here:
www1.hp.com/...Universal Print Driver for Windows PCL5/
Hope this helps speed you on your way!

Thanks for sharing your tip RatioCynic! That's what this forum is all about!
Happy printing!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

CORRECT DRIVER FOR WINDOWS 7 AND HP COLOR LASER JET 4600dn

I'm having a problem with our IT department. My old 4600dn worked great until they started downloading new drivers for Windows 7, which they installed just recently. Now the one he INSISTS I use has only one tray selection.... Auto. I'm trying to print business cards..(absolutely no problem till now).... but he INSISTS that this is the only driver. Then he wants me to choose Pg.....select 1, then MANUAL DUPLEX. That's almost impossible for the printer. I'm almost POSITIVE you have a print driver that will allow me the tray selections I had before he installed Windows 7 and this particular driver. I always used "Tray 1," CURRENT PAGE, it zoomed through the perforated cardstock like a streak!!!! Now, the poor printer is trying to run perforated cardstock through the duplexing unit. Out of 10 pages of cards, I ended up with 1 front printed and 9 pieces of cardstock that stuck in the tray and jammed in the duplexing unit. Is there a CORRECT print driver for this particular printer that will allow all my normal functions to be visible and viable? I don't have the model, nor serial #, as it is work printer and I'm at home now, so I can't get on chat. He is hard to get along with and has been playing games this whole time. I found one driver he inadvertantly left a day and a half ago and printed the cards like lightening, as it used to....7 minutes and I had 200 cards for two different staff members. PLEASE HELP! I think he's leading me down a merry path. It also has to be able to duplex fairly heavy graphic pages...and even the driver he accidently left as an option, won't print the graphics. I just KNOW you have a driver with all the options that will allow it to print to Windows 7 Operating System with all the former options. HELLLLLLLP!
Thanks sooooo much!
Kathi T.
[text removed for privacy]

Any suggestions re correct driver for windows 7 and HP 4600dn?

Use external drive for windows and mac

Hello,
I just bought a external 320Gb Western Digital Drive. I would like to use
the drive for windows and mac.I will not like to make partation on the drive
to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
Thanx.

If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

MSI StarCam Clip - signed driver for Windows 8

Similar Messages

Maybe you are looking for