MSI StarCam not installing

My Windows Hardware Update Wizard is not installing the web camera!
I found the .INF file but it still does not install.
My system meets all the requirements except one...
I am using Windows XP Pro x64 operating system.
Where can I get proper drivers or should I return the camera?

you need 64bit drivers to run any device in Windows XP x64. the 32bit drivers included on the CD won't work
look on the MSI website for the product support page for your device (click on Products right up top here, and then navigate to your product), if there are 64bit drivers available there, then use those
if there aren't, then you're stuck, and your webcam won't work
try contacting MSI support (How to contact MSI.), see if they have any plans for x64 driver for this device. if not, and you really must use XP x64, then you may have to change to an alternative device which has x64 drivers available
good luck!

Similar Messages

SCCM 2012 R2 Install - SMS_NOTIFICATION_SERVER install fail - bgbisapi.msi could not install

Installed SCCM 2012 R2 Primary Site on the D: drive on a Windows 2012 R2 server. The install went as expected but when I open the Component Status, there are a number of Error messages which pertain to the failed installation of the SMS_NOTIFICATION_SERVER:
"Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install."
Here is the error from BgbSetup.log:
<01/16/15 14:53:55> Installing the SMSBGB
<01/16/15 14:53:55> Passed OS version check.
<01/16/15 14:53:55> IIS Service is installed.
<01/16/15 14:53:55> SMSBGB already installed (Product Code: {A78E8003-2307-4B70-B7CD-1A07C0A31D21}). Upgrading/Reinstalling SMSBGB
<01/16/15 14:53:55> New SMSBGB is the same product code. This is a minor upgrade.
<01/16/15 14:53:55> Enabling MSI logging. bgbisapi.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\bgbisapiMSI.log
<01/16/15 14:53:55> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\bgbisapi.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration
Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/16/15 14:54:04> bgbisapi.msi exited with return code: 0
<01/16/15 14:54:04> Installation was successful.
<01/16/15 14:54:04> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /u "D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:08> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:08> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/16/15 14:54:12> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/16/15 14:54:12> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<01/16/15 14:54:12> Fatal MSI Error - bgbisapi.msi could not be installed.
<01/16/15 14:54:12> ~RoleSetup().
<01/16/15 14:54:21> ====================================================================
From what I've read online this problem seems to be born of installing SCCm on the D: drive which throws dotNET. A few people seem to have had some luck with editing two of the dotNET files (regsvcs.exe.config and InstallUtil.exe.config) to include
the following lines:
    <runtime>
        <loadfromRemoteSources enabled="true"/>
    </runtime>
In pursuit of a fix, I took backups of both files and then made the change to regsvc.exe.config but I was unable to do the same with Installutil.exe.config (opening the file in Admin Notepad would only let me Save As...).
Can anyone suggest what the problem could be? Am I barking up the wrong tree with the config file editing? Any info/advice would be much appreciated.
Thanks!

Hi,
You could try to copy Installutil.exe.config and edit the copy-file. Then copy the edited file to replace the old file.
Reference:ConfigMgr 2012 R2 – Notification Server Install Errors
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

CrystalReports11_5_NET.msi will not install

I have the same problem as outlined below. CrystalReport11_5_NET.msi will not install. It gives the error message "This software package can only be installed on systems that has installed .Net 1.0 or 1.1. Needless to say, 1.1 is installed. Does any one have a simpler solution than below?
Thanks,
Robert T
http://forums.msdn.microsoft.com/es-ES/vscrystalreports/thread/598537d5-03dd-460c-9696-60717c2dc2f4/
We currently have a case where we are supporting multiple versions of our product on the same web server (a windows 2003 server). However, we have 2 versions of our application on the same server, but one is in ASP.nET 1.1 and the other is in ASP.nET 2.0. Our applications are fine and can co-exist ok on the server. They both use Crystal REports XI, Relesae 2, which supports both 1.1 and 2.0.
Our developer machines run just fine wtih both products and crystal reports, but the problem we are having is deployment. When we install the runtime redistrubutale for ASP.nET 2.0 on the machine a file(CrystalReports11_5_NET_2005.msi) then our ASP.NET 2.0 application works fine. However, when we install the crystal runtime redistributable fro ASP.nET 1.1 a file (CrystalReports11_5_NET.msi) windows 2003 server will not let us install it, it gives us an error saying that "This software package can only be installed on systems that has .NET 1.0 or 1.1". Which of course this server has, because our application in 1.1 runs jsut fine.
2 questions.
1. Can Crystal Reports XI Relesae 2 co-exist on a windows 2003 server for BOTH the asp.net 1.1 and asp.net 2.0 version?
2. Has anyone encountered this and resolved this?
Thanks
I believe the only way to get this to work is to uninstall the 2.0 framework, install the XIr2 for 1.1 framework msi file, install the 2.0 framework, then install XIr2 for the 2.0 framework.
Can't do the uninstall stuff because I got SQL Server 2005 and other .NET 2.0 apps running on the server. I got it to work by copying the .NET 1.1 versions of the Crystal DLL files (e.g. CrystalDecisions.CrystalReports.Engine.dll) from my PC to the server in the corresponding directory and then adding them to the assembly cache with the 1.1 Configuration tool. Don't forget the xxx.resources.dll files in the "en" directory also. In my case, I just needed to get the 1.1 stuff working. This is really bad and just adds another Crystal Reports horror story to my already very long list (I've been using Crystal for almost 15 years).

asnwer to 1 is yes, R2 supports both 1.1 and 2.0 framework. I'm not sure why you are receiving that error
answer to 2 is I haven't seen it but you may get more info if you can log a message with our deployment team.
regards,
Tim

Adobe Professional MSI package not installing

Hello, I have downloaded the Adobe Professional MSI package from the Creative Cloud Packager but the application will not install. I have tried both 32bit and 64 bit versions to no avail.
Here are some errors from the PDApp.Log File
Any help that could be provided would be greatly appreciated.

Download, install,then run and remove Adobe Reader 6 using the Windows Installer CleanUp Utility. Now try the 9.2 installation again.

MSI will not install; Bundle status is "Downloaded"

Have been receiving numerous "Error impersonating configured user." messages.
I changed the bundle to "Run as secure system user (don't allow system to interact with desktop)" and changed the "Install MSI" action's "Install Parameters:" to from /i to /im. ("Install MSI" is the only action.)
I then incremented the version number. "Install Options" are set to "Install always".
The bundle status in the ZENworks Adaptive Agent is shown as "Downloaded" and the .MSI does not run.
The clients PC's use Windows 7.

Murrutia,
> Before incrementing the version number, can you tell me what the
> expected result would be in the there are devices that already have had
> a successful installation of the bundle? Will the Zenwork agent "ignore"
> the install or will a re-install be attempted?
A reinstall will be attempted if the verstion number is changed:
(http://www.novell.com/documentation/...tware_distribu
tion/?page=/documentation/zenworks11/zen11_cm_software_distribution/data/b
z87zho.html)
"D.1 Triggers that Cause an Install Action Set to Run
If you assign a bundle to a device or user, the Install action set runs on
the device only in the following circumstances:
If the Install action set has never run on the device.
If the version of the Install action set is different from the version of
the Install action set that has previously run on the device
The Install action set of a bundle is internally associated with a global
version identifier and the Install action set of every bundle version is
internally associated with a local version identifier.
If you make any modifications to a bundle other than modifying its Install
action set, the Install action set of the sandbox that is created has the
same local version identifier as the bundle version you modified. However,
if you modify the Install action set of a bundle, the global version
identifier of the bundles Install action set is incremented by one and
the modified Install action sets local version identifier is set to the
new value of the global version identifier.
If the install action set or its options are modified and the bundle is
re-published, then when the bundle is installed or launched, the install
action set is invoked again, even if it has been set to install only
once."
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Flashplayer10 msi will not install using gpo

I created a GPO in AD and assigned it to the computer level
not the user linked it to the domain and the scope securtiy filter
is domain computers. on a test box I boot in to windows and I can
see flash run the msi istall but when I log on the computer i look
in add and remove it's not there. so it never installed. we have a
locked out local coumputer policy to install in the
%windir%\system32 you have to either use runas or log on with the
local admin accout.
Anyone have any ideas or is this yet agian another in adobes
software.

OK we all know Macromedia sucks but when you post for help
you expect help so what is the deal. Guy you put out crap and then
support it the same way? like crap? I have family members who are
photographers and can never get cs2, cs3 to work they way they need
it to and try to get me to help I tell them to call you and they
all complain about you support. And I'm not supprised, so do you
support you your crap or just put it out and hope for the
best?

.msi do not install normally, but they do from terminal msiexec

I have a very strange problem happening right now and have tried every possible way to fix it or find a way around it.
Whenever I try to install any .msi file normally by just clicking on it in the explorer it fails with "Error 1359.An internal error ocurred.", if I try to install the same file using msiexec /i <msipath>setup.msi
/l*v c:\temp\msi.log it installs without any error, which is very strange.
I could live with that and just use msiexec whenever I had the need to install an .msi cause it doesn't happen too often. If only I didn't have the reason to install
Miscrosoft Visual C++ 2013 Redistributable (x86). The problem with it is that it has .msi packed inside .exe so I cannot run it using msiexec and on normal install it gives "Error 1359.An internal error ocurred."
and then 0x80070643 - Fatal error during installation. Here's the log file but it doesn't tell much apart from MSI package failing to install:
[1A28:19FC][2014-09-26T15:39:29]i001: Burn v3.7.2002.0, Windows v6.1 (Build 7601: Service Pack 1), path: F:\Downloads\vcredist_x86.exe, cmdline: '-burn.unelevated BurnPipe.{5DA9B3E6-81D9-4264-B441-633B3600D64B} {0AABAA02-8A98-4165-98FA-55AEC96EE970} 6420'
[1A28:19FC][2014-09-26T15:39:29]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929.log'
[1A28:19FC][2014-09-26T15:39:29]i000: Setting string variable 'WixBundleOriginalSource' to value 'F:\Downloads\vcredist_x86.exe'
[1A28:19FC][2014-09-26T15:39:29]i000: Setting string variable 'WixBundleName' to value 'Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.21005'
[1A28:19FC][2014-09-26T15:39:29]i100: Detect begin, 2 packages
[1A28:19FC][2014-09-26T15:39:29]i102: Detected related bundle: {7f51bdb9-ee21-49ee-94d6-90afc321780e}, type: Upgrade, scope: PerMachine, version: 12.0.21005.1, operation: None
[1A28:19FC][2014-09-26T15:39:29]i101: Detected package: vcRuntimeMinimum_x86, state: Absent, cached: Complete
[1A28:19FC][2014-09-26T15:39:29]i101: Detected package: vcRuntimeAdditional_x86, state: Absent, cached: Complete
[1A28:19FC][2014-09-26T15:39:29]i052: Condition 'VersionNT >= v6.0 OR (VersionNT = v5.1 AND ServicePackLevel >= 2) OR (VersionNT = v5.2 AND ServicePackLevel >= 1)' evaluates to true.
[1A28:19FC][2014-09-26T15:39:29]i199: Detect complete, result: 0x0
[1A28:19FC][2014-09-26T15:39:31]i200: Plan begin, 2 packages, action: Install
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleRollbackLog_vcRuntimeMinimum_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_0_vcRuntimeMinimum_x86_rollback.log'
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleLog_vcRuntimeMinimum_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_0_vcRuntimeMinimum_x86.log'
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleRollbackLog_vcRuntimeAdditional_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_1_vcRuntimeAdditional_x86_rollback.log'
[1A28:19FC][2014-09-26T15:39:31]i000: Setting string variable 'WixBundleLog_vcRuntimeAdditional_x86' to value 'C:\Users\ekze\AppData\Local\Temp\dd_vcredist_x86_20140926153929_1_vcRuntimeAdditional_x86.log'
[1A28:19FC][2014-09-26T15:39:31]i201: Planned package: vcRuntimeMinimum_x86, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: No, uncache: No, dependency: Register
[1A28:19FC][2014-09-26T15:39:31]i201: Planned package: vcRuntimeAdditional_x86, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: No, uncache: No, dependency: Register
[1A28:19FC][2014-09-26T15:39:31]i207: Planned related bundle: {7f51bdb9-ee21-49ee-94d6-90afc321780e}, type: Upgrade, default requested: None, ba requested: None, execute: None, rollback: None, dependency: None
[1A28:19FC][2014-09-26T15:39:31]i299: Plan complete, result: 0x0
[1A28:19FC][2014-09-26T15:39:31]i300: Apply begin
[1914:1200][2014-09-26T15:39:31]i360: Creating a system restore point.
[1914:1200][2014-09-26T15:39:38]i361: Created a system restore point.
[1914:1200][2014-09-26T15:39:38]i000: Caching bundle from: 'C:\Users\ekze\AppData\Local\Temp\{ce085a78-074e-4823-8dc1-8a721b94b76d}\.be\vcredist_x86.exe' to: 'C:\ProgramData\Package Cache\{ce085a78-074e-4823-8dc1-8a721b94b76d}\vcredist_x86.exe'
[1914:1200][2014-09-26T15:39:38]i320: Registering bundle dependency provider: {ce085a78-074e-4823-8dc1-8a721b94b76d}, version: 12.0.21005.1
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: vcRuntimeMinimum_x86 at path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi.
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: cab54A5CABBE7274D8A22EB58060AAB7623 at path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\cab1.cab.
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: vcRuntimeAdditional_x86 at path: C:\ProgramData\Package Cache\{F8CFEB22-A2E7-3971-9EDA-4B11EDEFC185}v12.0.21005\packages\vcRuntimeAdditional_x86\vc_runtimeAdditional_x86.msi.
[1914:09D8][2014-09-26T15:39:38]i304: Verified existing payload: cabB3E1576D1FEFBB979E13B1A5379E0B16 at path: C:\ProgramData\Package Cache\{F8CFEB22-A2E7-3971-9EDA-4B11EDEFC185}v12.0.21005\packages\vcRuntimeAdditional_x86\cab1.cab.
[1914:1200][2014-09-26T15:39:38]i301: Applying execute package: vcRuntimeMinimum_x86, action: Install, path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi, arguments: '
MSIFASTINSTALL="7" NOVSUI="1"'
[1914:1200][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to install MSI package.
[1914:1200][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to execute MSI package.
[1A28:19FC][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to configure per-machine MSI package.
[1A28:19FC][2014-09-26T15:41:26]i319: Applied execute package: vcRuntimeMinimum_x86, result: 0x80070643, restart: None
[1A28:19FC][2014-09-26T15:41:26]e000: Error 0x80070643: Failed to execute MSI package.
[1914:1200][2014-09-26T15:41:26]i330: Removed bundle dependency provider: {ce085a78-074e-4823-8dc1-8a721b94b76d}
[1914:1200][2014-09-26T15:41:26]i352: Removing cached bundle: {ce085a78-074e-4823-8dc1-8a721b94b76d}, from path: C:\ProgramData\Package Cache\{ce085a78-074e-4823-8dc1-8a721b94b76d}\
[1A28:19FC][2014-09-26T15:41:27]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No
I have tried doing a clean boot, tempering with registry, repairing .net 4.5, using different antivirus tools and even microsoft malicious software removal, they found nothing, and I don't have any antivirus or firewall software running at the time of installation,
as some have mentioned it could be the cause. I couldn't find any other solutions and any others doesn't seem to help. Is the only way out a complete reinstall of windows? I'm pretty desperate for it now.
Really hope that someone from here can offer a solution for this problem.

I have a very strange problem happening right now and have tried every possible way to fix it or find a way around it.
Whenever I try to install any .msi file normally by just clicking on it in the explorer it fails with "Error 1359.An internal error ocurred.", if I try to install the same file using msiexec /i <msipath>setup.msi
/l*v c:\temp\msi.log it installs without any error, which is very strange.
<.....>
I have tried doing a clean boot, tempering with registry, repairing .net 4.5, using different antivirus tools and even microsoft malicious software removal, they found nothing, and I don't have any antivirus or firewall software running at the time of installation,
as some have mentioned it could be the cause. I couldn't find any other solutions and any others doesn't seem to help. Is the only way out a complete reinstall of windows? I'm pretty desperate for it now.
Really hope that someone from here can offer a solution for this problem.
For Win7;
Try the System File Checker (it may be able to detect/correct errors like this)
http://support.microsoft.com/kb/929833
Also, try the CheckSUR tool (it may be able to detect/correct errors like this)
http://support.microsoft.com/kb/947821
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SCCM 2012 - sms_notificaiton_server install fails, bgbisapi.msi could not be installed

Hi,
installed a SCCM 2012 R2 Primary site on a 2012 R2 server on the D: drive. Everything seemed to go well, however i am am now encountering issues with the SMS_NOTIFICATION_SERVER in that the site component manager is unable to install it. The status message
viewer informs me that, "Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install."
When i check the Bgbsetup.log, i see the following lines:
<01/19/15 14:46:27> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/19/15 14:46:27> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/19/15 14:46:30> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/19/15 14:46:30> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<01/19/15 14:46:30> Fatal MSI Error - bgbisapi.msi could not be installed.
Having done a bit of reading, it seems a few other people have come accross this issue before:
https://rikkoss.wordpress.com/2013/12/11/tip-do-not-change-the-default-installation-location-for-configmgr-2012/
http://www.windows-noob.com/forums/index.php?/topic/7401-sms-notification-server-failed-critical-sccm-sp1-sql-2012-sp1/
The solution for these folks seems to be to edit 2 files in the .Net folder,InstallUtil.exe.config and Regsvc.exe.config,
and insert the following code:
<runtime>
<loadFromRemoteSources enabled=”true”/>
</runtime>
However, this hasn't worked for me and i'm still getting stuck with the same error messages. Since i'd really like to avoid reinstalling SCCM on the C: drive, can anyone suggest any possible solutions to this issue?

The MPsetup.log has this:
<01/20/15 16:28:11> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<01/20/15 16:28:11> Installing the SMSMP
<01/20/15 16:28:11> Passed OS version check.
<01/20/15 16:28:11> IIS Service is installed.
<01/20/15 16:28:11> No versions of SMSMP are installed. Installing new SMSMP.
<01/20/15 16:28:11> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<01/20/15 16:28:11> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/20/15 16:28:12> mp.msi exited with return code: 1603
<01/20/15 16:28:12> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<01/20/15 16:28:12> Fatal MSI Error - mp.msi could not be installed.
and the MPmsi.log has this:
MSI (s) (B0:E0) [16:37:14:660]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI23F6.tmp, Entrypoint: CcmRegisterPerfCounters
[16:37:14] @@ERR:25001
Internal Error 25001. 80070057
MSI (s) (B0!F8) [16:37:14:676]: Product: BGB http proxy -- Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Had a go at removing the MP, disabled the UAC and reinstalling the MP. Same result unfortunately...The server is temporarily housed in a block GPO OU so group policy shouldn't be an issue. Thanks for all the help so far!

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Msi object will not install with non-admin user

I've created an MSI object for the Flash 9 plugin, which installs okay
on the workstation when I login with an admin user. It will not
install when logged in with a normal user account. I have set it up as
an unsecure user and given the workstation R and F rights to the msi
object, but I'm still getting a 1603 error code.
Any suggestions?

http://appdeploy.com/packages/detail.asp?id=798
You will see the ZENworks reference on this page.
I would bookmark this site :>
I almost always check it before deploying a new package to see if it is
listed. Helps me find issues before the issues find me :>
[email protected] wrote:
> I've created an MSI object for the Flash 9 plugin, which installs okay
> on the workstation when I login with an admin user. It will not
> install when logged in with a normal user account. I have set it up as
>
> an unsecure user and given the workstation R and F rights to the msi
> object, but I'm still getting a 1603 error code.
>
> Any suggestions?
>
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCN

ITunes not installing, Window XP SP3. Warning reads "The feature you are trying to use is on a network resource that is unavailable. Enter alternate path to folder containing installation package"iTunes.msi.

iTunes not installing. Windows XP, SP3. Mesage reads:" The feature you are trying to use is ona network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.msi in the box below. iTunesSetup.exe shows in my download folder, but it will not install.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Upgrading but not installing Flash with MSI

I have an environment of some 600 PCs running XP. A few have Flash installed, most do not. Those that have Flash installed are a variety of versions.
It's my intent to perform a Flash install using MSI and GPO, and that's (mostly) tested and working.
However, I don't want to install Flash anywhere it isn't already. The systems that do have Flash installed are effectively random across the organization, not matching up in any way to GPO.Doing that I want to use the MSI, so I can have it automatically install to the machine.
Is there a way to install/upgrade Flash only on those systems that already have Flash installed, and not install it elsewhere?
Thanks

I don't know how to do that, although it sounds like a very good idea.
Have you seen the new 10.1 Admin Guide if it contains any suggestions: http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html ?
You will probably need to write some sort of script to test for a current FP installation before you proceed with the update.

Fatal msi error mp.msi could not be installed

Good morning,
I have SCCM 2012 R2 running on Server 2012 R2. I've got a primary site and two secondary sites, all of them with identical hardware and software. I've set them all up the exact same way, but on one of my secondary servers I can not get the MP
role to start. Looking at the MPSetup.log I see the following:
<10/10/14 08:17:31> ====================================================================
<10/10/14 08:17:31> SMSMP Setup Started....
<10/10/14 08:17:31> Parameters: C:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:ILCBPSCCM1 SMSMP 0
<10/10/14 08:17:31> Installing Pre Reqs for SMSMP
<10/10/14 08:17:31>         ======== Installing Pre Reqs for Role SMSMP ========
<10/10/14 08:17:31> Found 2 Pre Reqs for Role SMSMP
<10/10/14 08:17:31> Pre Req MSXML60 found.
<10/10/14 08:17:31> No versions of MSXML60 are installed. Would install new MSXML60.
<10/10/14 08:17:31> Enabling MSI logging. msxml6_x64.msi will log to C:\Program Files\Microsoft Configuration Manager\\logs\msxml6_x64MSI.log
<10/10/14 08:17:31> Installing C:\Program Files\Microsoft Configuration Manager\\bin\x64\00000409\msxml6_x64.msi
<10/10/14 08:17:35> msxml6_x64.msi exited with return code: 0
<10/10/14 08:17:35> msxml6_x64.msi Installation was successful.
<10/10/14 08:17:35> Pre Req SqlNativeClient found.
<10/10/14 08:17:35> SqlNativeClient already installed (Product Code: {49D665A2-4C2A-476E-9AB8-FCC425F526FC}). Would not install again.
<10/10/14 08:17:35> Pre Req SqlNativeClient is already installed. Skipping it.
<10/10/14 08:17:35>         ======== Completed Installation of Pre Reqs for Role SMSMP ========
<10/10/14 08:17:35> Installing the SMSMP
<10/10/14 08:17:35> Passed OS version check.
<10/10/14 08:17:35> IIS Service is installed.
<10/10/14 08:17:35> No versions of SMSMP are installed. Installing new SMSMP.
<10/10/14 08:17:35> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<10/10/14 08:17:35> Installing C:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<10/10/14 08:18:16> mp.msi exited with return code: 1603
<10/10/14 08:18:16> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<10/10/14 08:18:16> Fatal MSI Error - mp.msi could not be installed.
<10/10/14 08:18:16> ~RoleSetup().
I also found this in my mpMSI.log file
MSI (s) (0C!AC) [08:18:00:125]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Does anyone have any ideas why I would be receiving this error? These SCCM servers are brand new servers that are replacing our current SCCM 2007 servers and I did notice that somehow the old 2007 SCCM client had gotten installed on this server automatically
so I used ccmsetup /uninstall and also used ccmclean to remove it because I read that might be the issue, but it hasn't resolved the issue.   Any help would be appreciated.   Thanks

WOOT, WOOT! Actually I just got it. I ended up doing the following:
Ran ccmsetup.exe /uninstall and rebooted
Ran ccmclean.exe /all and rebooted
Removed IIS role from server and rebooted
Added IIS role back to server and rebooted
Checked my MPSetup and MPMsi logs and they both show success. Finally!
<10/10/14 09:01:12> ====================================================================
<10/10/14 09:01:13> SMSMP Setup Started....
<10/10/14 09:01:13> Parameters: C:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:ILCBPSCCM1 SMSMP 0
<10/10/14 09:01:13> Installing Pre Reqs for SMSMP
<10/10/14 09:01:13>         ======== Installing Pre Reqs for Role SMSMP ========
<10/10/14 09:01:13> Found 2 Pre Reqs for Role SMSMP
<10/10/14 09:01:13> Pre Req MSXML60 found.
<10/10/14 09:01:13> No versions of MSXML60 are installed. Would install new MSXML60.
<10/10/14 09:01:13> Enabling MSI logging. msxml6_x64.msi will log to C:\Program Files\Microsoft Configuration Manager\\logs\msxml6_x64MSI.log
<10/10/14 09:01:13> Installing C:\Program Files\Microsoft Configuration Manager\\bin\x64\00000409\msxml6_x64.msi
<10/10/14 09:01:16> msxml6_x64.msi exited with return code: 0
<10/10/14 09:01:16> msxml6_x64.msi Installation was successful.
<10/10/14 09:01:16> Pre Req SqlNativeClient found.
<10/10/14 09:01:16> SqlNativeClient already installed (Product Code: {49D665A2-4C2A-476E-9AB8-FCC425F526FC}). Would not install again.
<10/10/14 09:01:16> Pre Req SqlNativeClient is already installed. Skipping it.
<10/10/14 09:01:16>         ======== Completed Installation of Pre Reqs for Role SMSMP ========
<10/10/14 09:01:16> Installing the SMSMP
<10/10/14 09:01:16> Passed OS version check.
<10/10/14 09:01:16> IIS Service is installed.
<10/10/14 09:01:16> No versions of SMSMP are installed. Installing new SMSMP.
<10/10/14 09:01:16> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<10/10/14 09:01:16> Installing C:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<10/10/14 09:01:56> mp.msi exited with return code: 0
<10/10/14 09:01:56> Installation was successful.
<10/10/14 09:01:56> ~RoleSetup().

I can not install Bonjour 64.msi on my computer. Therefore I am unable to install itunes Help!!

I am unable to install itunes. It keeps asking for bonjour 64.msi. When serching the internet I found Bonjour 64.msi, but it would not install on my computer. Help!

I have seen this before. It is already on your computer, but it can't recognize it. Try using Microsoft FixIt

MSI StarCam not installing

Similar Messages

Maybe you are looking for