MSi Ti4400 Video-In problems

Hi,
So i got problems with video-in, I can't see any picture on the screen.
Programs I've tried:
Two different picture sources: tv and digi-tv-box.
Two different vga drivers: 44.03 and 43.xx.
Two different capture driver: newest for Ti-4400 from msi (v1.16) and newest from nvidia (v1.22).
Three different capture programs: Intervideo WinProducer, VirtualDub 1.54, TV-viewer.
...and my operating system is WinXP.
My hardware:
VGA: MSi G4Ti4400-VTD
Mainboard: MSi K7T266 Pro2-RU (AXP 2400+/512Mb)
....and the "s-vhs -> scart" cable i use works with tv-out so nothing wrong with that.
And i cant see signal on my monitor - nothing. ;(
Any hints? Suggestions?
TIA, sbafu

I have exactly the same problem.
Windows XP.
4400 VTD.
No picture. Tried VCR using Composite and DVD using S Video.
I have a webcam and Producer picks it up so that is not the problem. Same results with Windows Movie Maker. If you find something Please email me too at [email protected]
Thanx,
Ray :O

Similar Messages

K8N neo4 platinum /sli & msi 6800gt video card problem.... urgent help!!!!

I simply can't get the video card to work in the firts PCI-E port, however if the card is in the second port it works fine without the D-bracket locking the PC. Does someone know why this happened?, is the motherboard damaged?, or is there a solution to this problem?
Note: D-bracket is indicating a Memory detection test problem, but as
I said if the Video card is in the second PCI-e port the PC works fine
Plase help does someone knows why this is happening?

Could you add the list of your components to your signature (e.g. power suppy, memory, etc).
I am assuming that the SLI connector card is firmly in place and set for non-SLI operation and
that the video card only works when inserted into the slot that what would normally be used
by a second SLI video card. Is this correct?
Have you tried resetting your BIOS?

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

MSI VOX Audio / Video Sinc problem

Hi All.
Last week i bought a VOX TV Tuner. Nice device works well except for what i want it for.
When I try to cpature at Full PAL DVD resolution I get audio / video sinc problems. The audio is usually ahead of the video. Half PAL DVD or below it's fine.
I suspect it is the basic design of the box that is the trouble. Having the audio feed to the sound card rather than than in the USB2 feed has been a no no ever since the problem was discovered back in the USB 1 days. USB2 is capable of 400Megbits..
However I contacted another user who has no problems and says there is a patch for Direct x PAL video capture. Does any one know of this patch or has any one had the same problem as I have??
This device seems so new that there is no info on the net about it..
TIA.
System : P4. 2.4 Gig, 512 Meg ram, fast HDs, Direct X 9.0 (have not installed 9.0b yet) Asus Mobo P4Pe. Matrox Mystique video card. Win 2K SP4

Quote
However I contacted another user who has no problems and says there is a patch for Direct x PAL video capture
I would chase that up as it sounds promising.

Driver-related video playback problems.

Hi,
I've been experiencing less than stellar video playback for a while. My system is P4 1.6A 256MB RAM with msi FX 5700 128 MB running on WIN98 SE . The thing is that before upgrading my drivers to 50.XX series , I never had video playback problems, totally smooth, then after the 50.XX series, certain video clips froze for a second when opened, then when I installed the 5306 drivers, my system used to freeze for a second before video playback and video seeking stuttered and froze a lot. Since upgrading to 56.55 and then 56.64 version , the freezeups and stutters are gone but now the quality of the video playback is really crappy and also there is this horizontal border around the video and it looks kinda 'squinched?!?' . This erratic video behaviour has been going on through out my upgrade from a FX5200 to FX5700 card and with both MSI and nvidia drivers. Presently I'm using nvidia non-branded drivers 56.64. Also, why do these newer drivers keep dummy-proofing there options pages, you cannot even experiment enough with the settings anymore and I'm afraid Riva tuner or powerstrip might not work with the newer releases.
I haven't experienced any problems with video games, just video playback, either windowed or full-screen. I would really appreciate any help with this problem, its getting to be like an itch at the back you just can't scratch.
Thank you

What power supply u are using?
please list out the spec fully.

MSI ti4400 veritcal lines and blocks

Hiya,
If you take a look at the attached picture this shows you a screen shot of what the output from the graphics card looks like. I have checked the fan and heatsink and it does not seem to be overheating altough when the computer is first switched on the output appears fine but after 30seconds or so it will corrupt as the picture shows. If after the corruption the computer is reset the fonts in the BIOS boot up screen appear corrupted to. I have tried the latest NVidia drivers, some olders ones (42. something or other) and some from your website all have the same result leading me to belive it is a hardware problem.
I have reseated the graphics card many times and this appears to have no effect, however I have noticed that if the PC is run on its side it appears to take longer before the corruption will show up. I have also tried the card in another computer, and the same results appeared. At the moment im running a different card in my own computer and it is working fine.
I was wondering if you have any ideas on how to fix the problem??
My Spec is:
OS = Win2k/Win98SE
RAM = 256 DDR
CPU = 1400Mhz
MBoro = ASUS A7M266
Power Supply = 550Watts
CDRW = Meomorex
DVD Drive (unknown make)
HardDisk = 1 * 85Gb
1 * 15 Gb
SoundCard = Creative Audigy 2
Network Cards (D-Link and RealTeck)
Hauppage WinTV Card
Graphics Card = MSI TI4400
If you take a look at the picture below, you'll see the problems im having...

When I play RTCW game not long as 10 minutes, my screen become weird with weird blocks on it with different colors - similar texture as Pud2...after restart when WELCOME (Xp win) screen must show up, you don't have that screen but you have similar pictures on screen as vefore - red,black,green. And,after that, I must shutdown computer,wait 2-3 minutes and Windows starts normally. I touch my graphic card and it was not so warm. I pulled out graphic card and cleaned heatsink but no success. I have MSI Ti4800 SE graphic card. Installed,deinstalled old/new drivers but nothing. 10-15 minutes playing and here we go again - freezen screen. Graphic card is not overclocked.

Ti4400 Video In, unable to install drivers

I'm back. After trying to uninstall the 1.1.6 WDM drivers and backtrack to 1.0.8 because of capture problems (white bar across capture screen and lots of screen blinks), I can't install *any* capture drivers.
Whether I install 1.1.6., 1.1.2, or 1.0.8, I get the same problem. It runs the setup, tells me I have to restart, I restart, it gets to the login screen, pops up the "Unknown hardware detected", "Found Drivers for A/V Crossbar/WDM Capture" and then *blink*. Blue Screen of Death, it reports "VXD NTKERN" error. It goes back to the desktop, but only a small bit is visible in the center. Then it shuts down. Restarting does the same thing. Even replaced the ntkern.vxd file from the original setup files to see if it was corrupted, but no go.
I've tried installing the latest MSI ti4400 card drivers, the Nvidia latest beta Detonator drivers, and even backtracked to version 27 of the detonator drivers. The only thing that changes is occasionally the error message reported is a black screen before it goes to the desktop that says "configmgr error. reboot windows", followed by a power-down.
I'm running an Athlon KT133 1.9Ghz board, 512 mb PC133 RAM, 2 80 GB hard drives(maxtor, WD) and a soundblaster Live XGamer card.
Any suggestions?

Hi:
In order for me to provide the drivers you need except for the two I posted for you, you will need to click on each device needing drivers and post the hardware ID for them.
If you do not know where to find the hardware ID, please use the guide at the link below.
http://www.devicedriverfinder.com/blog/device-drivers/how-to-check-the-hardware-id-for-a-windows-dev...
Here are the drivers you need for the PCI Simple Comms Controller and the PCI device:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110126-1&cc=us&dlc=en&lc=en...=
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en...=

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
3. upgraded from 1.9 to 2.0 BIOS. still the same problem
4. reverted from 2.0 to 1.7 BIOS. the problem ended.
BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card. That was the last step (before chucking this mobo completely) in my attempts to fix the same problem. It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work. Would boot sometimes and at others gave a blue screen video error.
Flashing to bios 1.7 was the only thing that fixed it. Tried different memory, updating software, various combinations of drives, etc. For the record I tried bios 1.8, 1.9, 2.0, and 2.1. Not sure what about those updates causes problems but there definitely is something wrong.
Thanks.

The Video Out Problem...Fixed?

I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
ted.h.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Video import problem from iphone5 to PC giving error

Hi evereyone,
I have iphone 5. I try to import my videos but am not able to import all, its giving error. I tried also using windows live photo still same prob. the imported videos have problem in playing. I tried with vlc, quick time, the frames are broken and audio video lag. Please help me how i can import all and rum smoothly.

Ilan_B wrote:
Every time I plug my iphone 5 into the laptop (using windows 7) the easiest way is to right click on the portable device (iphone icon) and import to my pictures, BUT every time I do this it wants to import ALL photos and videos.
And when you do this, it should ask if you want to import the pictures that have already been imported. Select No.
Then, after you import, the photos should be deleted from the Camera Roll.
After the photos are imported and deleted from the Camera Roll, you can import using iTunes, only the photos you want on the iPhone.

Hello to all: My iMac has developed a video display problem. It displays everything in cartoon like colors - purple, green, blue. Can this be repaired? Is there a way to output to a different monitor? Thanks in advance! isplays

Hello -
My iMac has developed a video display problem. Everything now appears in a strange, cartoonish way. Purples, greens, blues. Can this be fixed, and if so, any idea how much it might cost? Also, could I output to a seperate monitor? I plan to replace the unit , but cannot right now. Thanks!

Go to System Preferences > Universal Access > Seeing.
In the Display area, reset it to "Black on white" by clicking that checkbox.
You can also reset it by pressing Command-Option-Control-8

Old IMac 17'' video sync problem at boot

Hi,
A friend has brought his IMac 17'', which has a video sync problem. At boot, all screen lines are out of sync, but I can more or less recognize the apple logo, which disappears later. Something happens at least, there is a boot processing going on I think.
I tried to reset the parameter ram, it does not help.
I have heard of a power supply problem that can cause that problem. Is that right? The computer serial is: W8446APAPP7.
Can anyone help?
Thanks!
Philippe

Here's a simple test case I've made, it's just a bunch of lines drawn in an orthographic OpenGL view. When you scroll horizontially with scrollbars or by space+dragging, the effect is very noticeble.
The .app and source are available here:
http://www.johnpsimons.com/mac/TestApp.tgz
http://www.johnpsimons.com/mac/TestSource.tgz
I believe this is the same problem as with the Apple homepage Flash thing. It's not just a problem with Flash.

MSi Ti4400 Video-In problems

Similar Messages

Maybe you are looking for